aboutsummaryrefslogtreecommitdiff
path: root/hw
AgeCommit message (Collapse)Author
2011-09-25ppc_prep: fix pci config space initializationAvi Kivity
Use data_mem for the data mmio region, not conf_mem. Signed-off-by: Avi Kivity <avi@redhat.com>
2011-09-23adlib: remove write-only variableHervé Poussineau
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-09-23irq: introduce qemu_irq_proxy()Avi Kivity
In some cases we have a circular dependency involving irqs - the irq controller depends on a bus, which in turn depends on the irq controller. Add qemu_irq_proxy() which acts as a passthrough, except that the target irq may be set later on. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-09-23virtio: Use global memory barrier macrosDavid Gibson
The virtio code uses wmb() macros in several places, as required by the SMP-aware virtio protocol. However the wmb() macro is locally defined to be a compiler barrier only. This is probably sufficient on x86 due to its strong storage ordering model, but it certainly isn't on other platforms, such as ppc. In any case, qemu already has some globally defined memory barrier macros in qemu-barrier.h. This patch, therefore converts virtio.c to use those barrier macros. The macros in qemu-barrier.h are also wrong (or at least, safe for x86 only) but this way at least there's only one place to fix them. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-09-23pci-devfn: check that device/slot number is within rangeDonald Dutile
Need to check that guest slot/device number is not > 31 or walk off the devfn table when checking if a devfn is available or not in a guest. before this fix, passing in an addr=abc or addr=34, can crash qemu, sometimes fail gracefully if data past end of devfn table fails the availability test. with this fix, get clean error: Property 'pci-assign.addr' doesn't take value '34' also tested when no addr= param passed for guest (pcicfg) address, and that worked as well. Signed-off-by: Don Dutile <ddutile@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-09-23isapc: give system address space when pci is disabledHervé Poussineau
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-09-23cirrus: Unbreak ISA supportJan Kiszka
Do not try to map against the PCI bar in the ISA version of the device. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-09-23vga: Unbreak ISA supportJan Kiszka
We need to initialize legacy_address_space during ISA VGA setup so that the chain-4 alias can be registered properly. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-09-23pc: Disable HPET for ISA machineJan Kiszka
There was no HPET on ISA boxes. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-09-23pc: Unbreak ROM mapping for ISA machineJan Kiszka
This is based on the original fix by Hervé Poussineau: pc_memory_init actually takes a memory region for mapping BIOS and extension ROMs. That equals the PCI memory region if PCI is available, but must be system memory in the ISA case. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-09-23e1000: Don't set the Capabilities List bitdann frazier
[Originally sent to qemu-kvm list, but I was redirected here] The Capabilities Pointer is NULL, so this bit shouldn't be set. The state of this bit doesn't appear to change any behavior on Linux/Windows versions we've tested, but it does cause Windows' PCI/PCI Express Compliance Test to balk. I happen to have a physical 82540EM controller, and it also sets the Capabilities Bit, but it actually has items on the capabilities list to go with it :) Signed-off-by: dann frazier <dann.frazier@canonical.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-09-23hw/omap_gpmc: Modify correct field when writing IRQSTATUS registerPeter Maydell
Writing to IRQSTATUS should affect irqst, not irqen -- error spotted by Andrzej Zaborowski. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-09-23hw/omap_gpmc: Add comment about FIFOTHRESHOLDSTATUS bitPeter Maydell
Promote the remark about why we handle FIFOTHRESHOLDSTATUS the way we do from the commit message of de8af7fe0 to a comment in the code. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-09-22Merge remote-tracking branch 'kwolf/for-anthony' into stagingAnthony Liguori
2011-09-22Merge remote-tracking branch 'stefanha/trivial-patches' into stagingAnthony Liguori
2011-09-22Merge remote-tracking branch 'qemu-kvm-tmp/memory/batch' into stagingAnthony Liguori
2011-09-21ahci: add port I/O index-data pairDaniel Verkamp
Implement an I/O space index-data register pair as defined by the AHCI spec, including the corresponding SATA PCI capability and BAR. This allows real-mode code to access the AHCI registers; real-mode code cannot address the memory-mapped register space because it is beyond the first megabyte. Signed-off-by: Daniel Verkamp <daniel@drv.nu> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-21Drop unneeded pthread.h inclusionsJan Kiszka
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-09-21omap1: convert to memory API (part VI)Avi Kivity
Easy RAM stuff. Acked-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-09-21soc_dma: drop soc_dma_port_add_mem_ram()Avi Kivity
It's a trivial wrapper for soc_dma_port_add_mem(), which makes the memory API conversion more difficult because it takes a ram addr_t. Drop. Acked-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-09-21omap_lcdc: remove imif, emiff from structureAvi Kivity
Not used. Acked-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-09-21omap1: convert to memory API (part V)Avi Kivity
Tricky aliases. Acked-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-09-21omap1: convert to memory API (part IV)Avi Kivity
Acked-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-09-21omap1: convert to memory API (part III)Avi Kivity
Acked-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-09-21omap1: convert to memory API (part II)Avi Kivity
Acked-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-09-21omap1: convert to memory API (part I)Avi Kivity
Acked-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-09-20Merge remote-tracking branch 'mst-tmp/for_anthony' into stagingAnthony Liguori
2011-09-20Merge remote-tracking branch 'kwolf/for-anthony' into stagingAnthony Liguori
2011-09-20Merge remote-tracking branch 'qmp/queue/qmp' into stagingAnthony Liguori
2011-09-20pci_bridge: simplify memory regions some moreMichael S. Tsirkin
replace alloc/free with struct members. todo: smash with initial implementation after testing. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-09-20scsi: fix sign extension problemsPaolo Bonzini
When assigning a 32-bit value to cmd->xfer (which is 64-bits) it can be erroneously sign extended because the intermediate 32-bit computation is signed. Fix this by standardizing on the ld*_be_p functions. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-20AHCI Port Interrupt Enable register cleaning on soft resetAlexander Motin
I've found that FreeBSD AHCI driver doesn't work with AHCI hardware emulation of QEMU 0.15.0. I believe the problem is on QEMU's side. As I see, it clears port's Interrupt Enable register each time when reset of any level happens. Is is reasonable for the global controller reset. It is probably not good, but acceptable for FreeBSD driver for the port hard reset. But it is IMO wrong for the device soft reset. None of real hardware I know behaves that way. Signed-off-by: Alexander Motin <mav@FreeBSD.org> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-20scsi-disk: lazily allocate bounce bufferPaolo Bonzini
It will not be needed for reads and writes if the HBA provides a sglist. In addition, this lets scsi-disk refuse commands with an excessive allocation length, as well as limit memory on usual well-behaved guests. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-20scsi-disk: commonize iovec creation between reads and writesPaolo Bonzini
Also, consistently use qiov.size instead of iov.iov_len. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-19pci: implement bridge filteringMichael S. Tsirkin
Support bridge filtering on top of the memory API as suggested by Avi Kivity: Create a memory region for the bridge's address space. This region is not directly added to system_memory or its descendants. Devices under the bridge see this region as its pci_address_space(). The region is as large as the entire address space - it does not take into account any windows. For each of the three windows (pref, non-pref, vga), create an alias with the appropriate start and size. Map the alias into the bridge's parent's pci_address_space(), as subregions. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-09-19pci_bridge: use parent bus's address spaceWen Congyang
The switch to the new memory API caused the following problem: The pci device may call pci_register_bar() to use PCI bus's address space. But we don't init PCI bus's address space if it is not bus 0. A crash was reported: http://lists.gnu.org/archive/html/qemu-devel/2011-08/msg02243.html More work will be needed to make bridge filtering work correctly with the memory API. Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-09-19pci: Remove unused mem_base from PCIBusJan Kiszka
Obsoleted by f64e02b6cc. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-09-19pci: interrupt pin documentation updateMichael S. Tsirkin
Fix up some erroneous comments in code: interrupt pins are named A-D, the interrupt pin register is always readonly and isn't zeroed out on reset. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-09-19pci: Remove unused pci_reserve_capabilityJan Kiszka
eepro100 was the last user. Now pci_add_capability is powerful enough. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-09-19dma-helpers: rename is_write to to_devPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-19scsi-generic: do not disable FUAPaolo Bonzini
I found no rationale for this in the logs, and it is quite bad because it will make scsi-generic unsafe WRT power failures. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-18musicpal: convert to memory APIAvi Kivity
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-09-18mips_r4k: convert to memory APIAvi Kivity
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-09-18mips_mipssim: convert to memory APIAvi Kivity
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-09-18mips_malta: convert to memory APIAvi Kivity
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-09-18mips_jazz: convert to memory APIAvi Kivity
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-09-18sun4u: don't set up isa_mem_baseBlue Swirl
Since we use memory API in sun4u.c, after 71579cae30b53c910cd6c47ab4e683f647d36519, setting up isa_mem_base puts vga.chain4 outside of the physical address space. Fix by removing obsolete isa_mem_base set up. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-17trace: add virtio_set_status() trace eventStefan Hajnoczi
The virtio device lifecycle can be observed by looking at the sequence of set status operations. This is especially important for catching the reset operation (status value 0), which resets the device and all virtqueues. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-16qdev: print bus properties tooGerd Hoffmann
Make qdev_device_help print both device and bus properties. Helps libvirt to figure whenever bus properties such as PCI.multifunction are supported present or not. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-09-16vga: Respect isa_mem_base when registering chain4 aliasJan Kiszka
This does not yet unbreak PPC (which has its own problems) but potentially other non-x86 systems where isa_mem_base is != 0. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-27 02:35:29 +0000