aboutsummaryrefslogtreecommitdiff
path: root/hw
AgeCommit message (Collapse)Author
2011-09-19pci: Remove unused pci_reserve_capabilityJan Kiszka
eepro100 was the last user. Now pci_add_capability is powerful enough. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-09-18sun4u: don't set up isa_mem_baseBlue Swirl
Since we use memory API in sun4u.c, after 71579cae30b53c910cd6c47ab4e683f647d36519, setting up isa_mem_base puts vga.chain4 outside of the physical address space. Fix by removing obsolete isa_mem_base set up. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-17trace: add virtio_set_status() trace eventStefan Hajnoczi
The virtio device lifecycle can be observed by looking at the sequence of set status operations. This is especially important for catching the reset operation (status value 0), which resets the device and all virtqueues. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-16qdev: print bus properties tooGerd Hoffmann
Make qdev_device_help print both device and bus properties. Helps libvirt to figure whenever bus properties such as PCI.multifunction are supported present or not. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-09-16vga: Respect isa_mem_base when registering chain4 aliasJan Kiszka
This does not yet unbreak PPC (which has its own problems) but potentially other non-x86 systems where isa_mem_base is != 0. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-09-16hw/integratorcp: Fix bugs in writes to CM_CTRL system registerPeter Maydell
Fix a number of bugs in the implementation of writes to the CM_CTRL system register: * write to cm_ctrl, not cm_init ! * an '&' vs '^' typo meant we would write the inverse of the bits * handling the LED via printf() meant we spew lots of output to stdout when Linux uses the LED as a heartbeat indicator * we would hw_error() if a reset was requested rather than actually resetting Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-09-16vga: Fix text mode screendumpsJan Kiszka
In text mode, even a full refresh of the screen takes multiple updates. As we reset the dump file pointer after the first call, we only wrote the first line. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-09-16Remove blanks before \n in output stringsStefan Weil
Those blanks violate the coding conventions, see scripts/checkpatch.pl. Blanks missing after colons in the changed lines were added. This patch does not try to fix tabs, long lines and other problems in the changed lines, therefore checkpatch.pl reports many violations. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-09-15Merge remote-tracking branch 'aneesh/for-upstream-4' into stagingAnthony Liguori
2011-09-12ahci: Remove unused struct memberStefan Weil
Member variable is_read is written, but never read (contrary to its name). Remove it. Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12ide/atapi scsi-disk: Make monitor eject -f, then change workMarkus Armbruster
change fails while the tray is locked by the guest. eject -f forces it open and removes any media. Unfortunately, the tray closes again instantly. Since the lock remains as it is, there is no way to insert another medium unless the guest voluntarily unlocks. Fix by leaving the tray open after monitor eject. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12block: New change_media_cb() parameter loadMarkus Armbruster
To let device models distinguish between eject and load. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12block: New bdrv_set_buffer_alignment()Markus Armbruster
Device models should be able to set it without an unclean include of block_int.h. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12hw: Trim superfluous #include "block_int.h"Markus Armbruster
Including it in device models is unclean, including it without a reason adds insult to injury. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12block: Move BlockConf & friends from block_int.h to block.hMarkus Armbruster
It's convenience stuff for block device models, so block.h isn't the ideal home either, but better than block_int.h. Permits moving some #include "block_int.h" from device model .h into .c. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12block: Show whether the virtual tray is open in info blockMarkus Armbruster
Need to ask the device, so this requires new BlockDevOps member is_tray_open(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12block: Drop BlockDriverState member removableMarkus Armbruster
It's a confused mess (see previous commit). No users remain. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12block: Clean up remaining users of "removable"Markus Armbruster
BlockDriverState member removable is a confused mess. It is true when an ide-cd, scsi-cd or floppy qdev is attached, or when the BlockDriverState was created with -drive if={floppy,sd} or -drive if={ide,scsi,xen,none},media=cdrom ("created removable"), except when an ide-hd, scsi-hd, scsi-generic or virtio-blk qdev is attached. Three users remain: 1. eject_device(), via bdrv_is_removable() uses it to determine whether a block device can eject media. 2. bdrv_info() is monitor command "info block". QMP documentation says "true if the device is removable, false otherwise". From the monitor user's point of view, the only sensible interpretation of "is removable" is "can eject media with monitor commands eject and change". A block device can eject media unless a device is attached that doesn't support it. Switch the two users over to new bdrv_dev_has_removable_media() that returns exactly that. 3. bdrv_getlength() uses to suppress its length cache when media can change (see commit 46a4e4e6). Media change is either monitor command change (updates the length cache), monitor command eject (doesn't update the length cache, easily fixable), or physical media change (invalidates length cache, not so easily fixable). I'm refraining from improving anything here, because this series is long enough already. Instead, I simply switch it over to bdrv_dev_has_removable_media() as well. This changes the behavior of the length cache and of monitor commands eject and change in two cases: a. drive not created removable, no device attached The commit makes the drive removable, and defeats the length cache. Example: -drive if=none b. drive created removable, but the attached drive is non-removable, and doesn't call bdrv_set_removable(..., 0) (most devices don't) The commit makes the drive non-removable, and enables the length cache. Example: -drive if=xen,media=cdrom -M xenpv The other non-removable devices that don't call bdrv_set_removable() can't currently use a drive created removable, either because they aren't qdevified, or because they lack a drive property. Won't stay that way. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12ide/atapi: Preserve tray state on migrationMarkus Armbruster
Use a subsection, so that migration to older version still works, provided the tray is closed and unlocked. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12scsi-disk: Fix START_STOP to fail when it can't ejectMarkus Armbruster
Don't fail when tray is already open. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12ide/atapi: Don't fail eject when tray is already openMarkus Armbruster
MMC-5 6.40.2.6 specifies that START STOP UNIT succeeds when the drive already has the requested state. cmd_start_stop_unit() fails when asked to eject while the tray is open and locked. Fix that. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12block: Rename bdrv_set_locked() to bdrv_lock_medium()Markus Armbruster
While there, make the locked parameter bool. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12block: Drop medium lock tracking, ask device models insteadMarkus Armbruster
Requires new BlockDevOps member is_medium_locked(). Implement for IDE and SCSI CD-ROMs. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12block: Leave enforcing tray lock to device modelsMarkus Armbruster
The device model knows best when to accept the guest's eject command. No need to detour through the block layer. bdrv_eject() can't fail anymore. Make it void. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12scsi-disk: Track tray locked stateMarkus Armbruster
We already track it in BlockDriverState. Just like tray open/close state, we should track it in the device models instead, because it's device state. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12ide/atapi: Track tray locked stateMarkus Armbruster
We already track it in BlockDriverState. Just like tray open/close state, we should track it in the device models instead, because it's device state. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12block: Revert entanglement of bdrv_is_inserted() with tray statusMarkus Armbruster
Commit 4be9762a changed bdrv_is_inserted() to fail when the tray is open. Unfortunately, there are two different kinds of users, with conflicting needs. 1. Device models using bdrv_eject(), currently ide-cd and scsi-cd. They expect bdrv_is_inserted() to reflect the tray status. Commit 4be9762a makes them happy. 2. Code that wants to know whether a BlockDriverState has media, such as find_image_format(), bdrv_flush_all(). Commit 4be9762a makes them unhappy. In particular, it breaks flush on VM stop for media ejected by the guest. Revert the change to bdrv_is_inserted(). Check the tray status in the device models instead. Note on IDE: Since only ATAPI devices have a tray, and they don't accept ATA commands since the recent commit "ide: Reject ATA commands specific to drive kinds", checking in atapi.c suffices. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12scsi-disk: Track tray open/close stateMarkus Armbruster
We already track it in BlockDriverState since commit 4be9762a. As discussed in that commit's message, we should track it in the device device models instead, because it's device state. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12scsi-disk: Factor out scsi_disk_emulate_start_stop()Markus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12ide/atapi: Track tray open/close stateMarkus Armbruster
We already track it in BlockDriverState since commit 4be9762a. As discussed in that commit's message, we should track it in the device device models instead, because it's device state. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12ide/atapi: Clean up misleading name in cmd_start_stop_unit()Markus Armbruster
"eject" is misleading; it means "eject" when start is clear, but "load" when start is set. Rename to loej, because that's how MMC-5 calls it, in section 6.40. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12ide: Reject ATA commands specific to drive kindsMarkus Armbruster
ACS-2 Table B.2 explicitly prohibits ATAPI devices from implementing WIN_RECAL, WIN_READ_EXT, WIN_READDMA_EXT, WIN_READ_NATIVE_MAX, WIN_MULTREAD_EXT, WIN_WRITE, WIN_WRITE_ONCE, WIN_WRITE_EXT, WIN_WRITEDMA_EXT, WIN_MULTWRITE_EXT, WIN_WRITE_VERIFY, WIN_VERIFY, WIN_VERIFY_ONCE, WIN_VERIFY_EXT, WIN_SPECIFY, WIN_MULTREAD, WIN_MULTWRITE, WIN_SETMULT, WIN_READDMA, WIN_READDMA_ONCE, WIN_WRITEDMA, WIN_WRITEDMA_ONCE, WIN_FLUSH_CACHE_EXT. Restrict them to IDE_HD and IDE_CFATA. Same for CFA_WRITE_SECT_WO_ERASE, CFA_WRITE_MULTI_WO_ERASE. Restrict them to IDE_CFATA, like the other CFA_ commands. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12ide: Use a table to declare which drive kinds accept each commandMarkus Armbruster
No functional change. It would be nice to have handler functions in the table, like commit e1a064f9 did for ATAPI. Left for another day. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-12ide: Fix ATA command READ to set ATAPI signature for CD-ROMMarkus Armbruster
Must set the ATAPI device signature, see ATA4 8.27.5.2 Outputs for PACKET Command feature set devices, and ACS-2 7.36.6 Outputs for PACKET feature set devices. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-09-10target-xtensa: add dc232b core and boardMax Filippov
This is Diamond 232L Standard Core Rev.B (LE). Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-10target-xtensa: implement CPENABLE and PRID SRsMax Filippov
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-10target-xtensa: implement interrupt optionMax Filippov
See ISA, 4.4.6 (interrupt option), 4.4.7 (high priority interrupt option) and 4.4.8 (timer interrupt option) for details. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-10target-xtensa: add sample boardMax Filippov
Sample board and sample CPU core are used for debug and may be used for development of custom SoC emulators. This board has two fixed size memory regions for DTCM and ITCM and variable length SRAM region. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-10target-xtensa: add target stubsMax Filippov
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-10mipsnet: use trace frameworkHervé Poussineau
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-10mipsnet: convert to qdevHervé Poussineau
Move mipsnet_init() function to mipssim machine Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-10PCI: delete unused mem_base and pci_to_cpu_addrBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-10lsi53c895a: avoid a warning from clang analyzerBlue Swirl
Avoid this warning from clang analyzer by deleting the variable: /src/qemu/hw/lsi53c895a.c:895:5: warning: Value stored to 'id' is never read id = (current_tag >> 8) & 0xf; Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-10hid: fix misassignmentBlue Swirl
The code does not have any effect as is, fix it. Spotted by clang analyzer: /src/qemu/hw/hid.c:99:13: warning: Value stored to 'x1' is never read x1 = 1; Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-10scsi-bus: remove duplicate table entriesBlue Swirl
Remove duplicate entries from SCSI command table, spotted by clang analyzer: /src/qemu/hw/scsi-bus.c:979:40: warning: initializer overrides prior initialization of this subobject [ ERASE_16 ] = "ERASE_16", /src/qemu/hw/scsi-bus.c:978:40: note: previous initialization is here [ WRITE_SAME_16 ] = "WRITE_SAME_16", /src/qemu/hw/scsi-bus.c:984:40: warning: initializer overrides prior initialization of this subobject [ MAINTENANCE_IN ] = "MAINTENANCE_IN", /src/qemu/hw/scsi-bus.c:917:40: note: previous initialization is here [ MAINTENANCE_IN ] = "MAINTENANCE_IN", /src/qemu/hw/scsi-bus.c:985:40: warning: initializer overrides prior initialization of this subobject [ MAINTENANCE_OUT ] = "MAINTENANCE_OUT", /src/qemu/hw/scsi-bus.c:918:40: note: previous initialization is here [ MAINTENANCE_OUT ] = "MAINTENANCE_OUT", Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-10g364fb: compile in hwlibBlue Swirl
Compile g364fb in hwlib. Two compilations less for the full build. Acked-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-09-09Merge remote-tracking branch 'sstabellini/xen-next' into stagingAnthony Liguori
2011-09-09Merge remote-tracking branch 'stefanha/trivial-patches' into stagingAnthony Liguori
2011-09-09Don't use g_thread_get_initialized.Gerd Hoffmann
Initialize glib threads unconditionally in main() instead of using g_thread_get_initialized in the 9p code. Fixes a build failure on RHEL-5, which ships glib 2.12. g_thread_get_initialized was added in 2.20. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-09-09virtio-balloon: Disassociate from the balloon handlers on unplugAmit Shah
Adding a 2nd balloon device after unplugging the first one doesn't work. Also, the 'info balloon' command should indicate an error mentioning no balloon device is registered after unplug. Reproduction steps given by Shaolong Hu: (qemu) info balloon Device 'balloon' has not been activated by the guest (qemu) device_add virtio-balloon-pci,id=balloon1 (qemu) info balloon balloon: actual=4096 (qemu) balloon 2048 (qemu) info balloon balloon: actual=2048 (qemu) device_del balloon1 (qemu) info balloon balloon: actual=4096 (qemu) balloon 2048 (qemu) info balloon balloon: actual=4096 (qemu) device_del balloon1 Device 'balloon1' not found (qemu) device_add virtio-balloon-pci,id=balloon1 Another balloon device already registered Device 'virtio-balloon-pci' could not be initialized (qemu) device_add virtio-balloon-pci,id=balloon2 Another balloon device already registered Device 'virtio-balloon-pci' could not be initialized Reported-by: Shaolong Hu <shu@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-11-24 04:12:12 +0000