aboutsummaryrefslogtreecommitdiff
path: root/hw
AgeCommit message (Collapse)Author
2019-10-28include: Move endof() up from hw/virtio/virtio.hMax Reitz
endof() is a useful macro, we can make use of it outside of virtio. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20191011152814.14791-2-mreitz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
2019-10-25Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into ↵Peter Maydell
staging Pull request # gpg: Signature made Fri 25 Oct 2019 20:18:23 BST # gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full] # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full] # Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8 * remotes/stefanha/tags/block-pull-request: yield_until_fd_readable: make it work with any AioContect virtio-blk: Add blk_drain() to virtio_blk_device_unrealize() Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-25Merge remote-tracking branch ↵Peter Maydell
'remotes/vivier2/tags/trivial-branch-pull-request' into staging Fix typos and docs, trivial changes and RTC devices split # gpg: Signature made Fri 25 Oct 2019 09:35:02 BST # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/trivial-branch-pull-request: hw/rtc/aspeed_rtc: Remove unused includes hw/rtc/xlnx-zynqmp-rtc: Remove unused "ptimer.h" include hw/rtc/mc146818: Include mc146818rtc_regs.h a bit less hw: Move Aspeed RTC from hw/timer/ to hw/rtc/ subdirectory hw: Move Exynos4210 RTC from hw/timer/ to hw/rtc/ subdirectory hw: Move Xilinx ZynqMP RTC from hw/timer/ to hw/rtc/ subdirectory hw: Move DS1338 device from hw/timer/ to hw/rtc/ subdirectory hw: Move TWL92230 device from hw/timer/ to hw/rtc/ subdirectory hw: Move sun4v hypervisor RTC from hw/timer/ to hw/rtc/ subdirectory hw: Move M41T80 device from hw/timer/ to hw/rtc/ subdirectory hw: Move M48T59 device from hw/timer/ to hw/rtc/ subdirectory hw: Move MC146818 device from hw/timer/ to hw/rtc/ subdirectory hw: Move PL031 device from hw/timer/ to hw/rtc/ subdirectory hw/timer: Compile devices not target-dependent as common object qemu-timer: reuse MIN macro in qemu_timeout_ns_to_ms event_notifier: avoid dandling file descriptor in event_notifier_cleanup util/async: avoid useless cast pci_bridge: fix a typo in comment qemu-options.hx: Update for reboot-timeout parameter Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # hw/timer/trace-events
2019-10-25virtio-blk: Add blk_drain() to virtio_blk_device_unrealize()Julia Suvorova
QEMU does not wait for completed I/O requests, assuming that the guest driver will reset the device before calling unrealize(). This does not happen on Windows, and QEMU crashes in virtio_notify(), getting the result of a completed I/O request on hot-unplugged device. Signed-off-by: Julia Suvorova <jusual@redhat.com> Message-Id: <20191018142856.31870-1-jusual@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-10-25hw/arm/highbank: Use AddressSpace when using write_secondary_boot()Philippe Mathieu-Daudé
write_secondary_boot() is used in SMP configurations where the CPU address space might not be the main System Bus. The rom_add_blob_fixed_as() function allow us to specify an address space. Use it to write each boot blob in the corresponding CPU address space. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20191019234715.25750-15-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-25hw/arm/raspi: Use AddressSpace when using arm_boot::write_secondary_bootPhilippe Mathieu-Daudé
write_secondary_boot() is used in SMP configurations where the CPU address space might not be the main System Bus. The rom_add_blob_fixed_as() function allow us to specify an address space. Use it to write each boot blob in the corresponding CPU address space. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20191019234715.25750-11-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-25hw/arm/bcm2836: Rename cpus[] as cpu[].corePhilippe Mathieu-Daudé
As we are going to add more core-specific fields, add a 'cpu' structure and move the ARMCPU field there as 'core'. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20191019234715.25750-7-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-25hw/arm/bcm2836: Make the SoC code modularPhilippe Mathieu-Daudé
This file creates the BCM2836/BCM2837 blocks. The biggest differences with the BCM2838 we are going to add, are the base addresses of the interrupt controller and the peripherals. Add these addresses in the BCM283XInfo structure to make this block more modular. Remove the MCORE_OFFSET offset as it is not useful and rather confusing. Reviewed-by: Esteban Bosse <estebanbosse@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20191019234715.25750-6-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-25hw/arm/bcm2835_peripherals: Use the SYS_timerPhilippe Mathieu-Daudé
Connect the recently added SYS_timer. Now U-Boot does not hang anymore polling a free running counter stuck at 0. This timer is also used by the Linux kernel thermal subsystem. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20191019234715.25750-5-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-25hw/timer/bcm2835: Add the BCM2835 SYS_timerPhilippe Mathieu-Daudé
Add the 64-bit free running timer. Do not model the COMPARE register (no IRQ generated). This timer is used by Linux kernel and recently U-Boot: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/clocksource/bcm2835_timer.c?h=v3.7 https://github.com/u-boot/u-boot/blob/v2019.07/include/configs/rpi.h#L19 Datasheet used: https://www.raspberrypi.org/app/uploads/2012/02/BCM2835-ARM-Peripherals.pdf Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20191019234715.25750-4-f4bug@amsat.org [PMM: squashed in switch to using memset in reset] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-25hw/arm/bcm2835_peripherals: Use the thermal sensor blockPhilippe Mathieu-Daudé
Map the thermal sensor in the BCM2835 block. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20191019234715.25750-3-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-25hw/misc/bcm2835_thermal: Add a dummy BCM2835 thermal sensorPhilippe Mathieu-Daudé
We will soon implement the SYS_timer. This timer is used by Linux in the thermal subsystem, so once available, the subsystem will be enabled and poll the temperature sensors. We need to provide the minimum required to keep Linux booting. Add a dummy thermal sensor returning ~25°C based on: https://github.com/raspberrypi/linux/blob/rpi-5.3.y/drivers/thermal/broadcom/bcm2835_thermal.c Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20191019234715.25750-2-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-25hw/watchdog/milkymist-sysctl.c: Switch to transaction-based ptimer APIPeter Maydell
Switch the milkymist-sysctl code away from bottom-half based ptimers to the new transaction-based ptimer API. This just requires adding begin/commit calls around the various places that modify the ptimer state, and using the new ptimer_init() function to create the timer. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20191021141040.11007-1-peter.maydell@linaro.org
2019-10-25hw/m68k/mcf5206.c: Switch to transaction-based ptimer APIPeter Maydell
Switch the mcf5206 code away from bottom-half based ptimers to the new transaction-based ptimer API. This just requires adding begin/commit calls around the various places that modify the ptimer state, and using the new ptimer_init() function to create the timer. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 20191021140600.10725-1-peter.maydell@linaro.org
2019-10-25hw/timer/grlib_gptimer.c: Switch to transaction-based ptimer APIPeter Maydell
Switch the grlib_gptimer code away from bottom-half based ptimers to the new transaction-based ptimer API. This just requires adding begin/commit calls around the various places that modify the ptimer state, and using the new ptimer_init() function to create the timer. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20191021134357.14266-3-peter.maydell@linaro.org Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-25hw/timer/slavio_timer.c: Switch to transaction-based ptimer APIPeter Maydell
Switch the slavio_timer code away from bottom-half based ptimers to the new transaction-based ptimer API. This just requires adding begin/commit calls around the various places that modify the ptimer state, and using the new ptimer_init() function to create the timer. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191021134357.14266-4-peter.maydell@linaro.org Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-24hw/rtc/xlnx-zynqmp-rtc: Remove unused "ptimer.h" includePhilippe Mathieu-Daudé
The "hw/ptimer.h" header is not used, remove it. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20191003230404.19384-14-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-10-24hw/rtc/mc146818: Include mc146818rtc_regs.h a bit lessPhilippe Mathieu-Daudé
Only 2 source files require the "mc146818rtc_regs.h" header. Instead of having it processed 12 times, by all objects using "mc146818rtc.h", include it directly where used. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20191003230404.19384-13-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-10-24hw: Move Aspeed RTC from hw/timer/ to hw/rtc/ subdirectoryPhilippe Mathieu-Daudé
Move RTC devices under the hw/rtc/ subdirectory. Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20191003230404.19384-12-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-10-24hw: Move Exynos4210 RTC from hw/timer/ to hw/rtc/ subdirectoryPhilippe Mathieu-Daudé
Move RTC devices under the hw/rtc/ subdirectory. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20191003230404.19384-11-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-10-24hw: Move Xilinx ZynqMP RTC from hw/timer/ to hw/rtc/ subdirectoryPhilippe Mathieu-Daudé
Move RTC devices under the hw/rtc/ subdirectory. Remove Alistair outdated email address (see commit c22e580c2ad). Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20191003230404.19384-10-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-10-24hw: Move DS1338 device from hw/timer/ to hw/rtc/ subdirectoryPhilippe Mathieu-Daudé
The DS1338 is a Real Time Clock, not a timer. Move it under the hw/rtc/ subdirectory. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20191003230404.19384-9-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-10-24hw: Move TWL92230 device from hw/timer/ to hw/rtc/ subdirectoryPhilippe Mathieu-Daudé
The TWL92230 is an "energy management device" companion with a RTC. Since we mostly model the RTC, move it under the hw/rtc/ subdirectory. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20191003230404.19384-8-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-10-24hw: Move sun4v hypervisor RTC from hw/timer/ to hw/rtc/ subdirectoryPhilippe Mathieu-Daudé
Move RTC devices under the hw/rtc/ subdirectory. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Artyom Tarasenko <atar4qemu@gmail.com> Message-Id: <20191003230404.19384-7-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-10-24hw: Move M41T80 device from hw/timer/ to hw/rtc/ subdirectoryPhilippe Mathieu-Daudé
The M41T80 is a Real Time Clock, not a timer. Move it under the hw/rtc/ subdirectory. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20191003230404.19384-6-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-10-24hw: Move M48T59 device from hw/timer/ to hw/rtc/ subdirectoryPhilippe Mathieu-Daudé
The M48T59 is a Real Time Clock, not a timer. Move it under the hw/rtc/ subdirectory. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20191003230404.19384-5-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-10-24hw: Move MC146818 device from hw/timer/ to hw/rtc/ subdirectoryPhilippe Mathieu-Daudé
The MC146818 is a Real Time Clock, not a timer. Move it under the hw/rtc/ subdirectory. Use copyright statement from 80cabfad163 for "hw/rtc/mc146818rtc.h". Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20191003230404.19384-4-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-10-24hw: Move PL031 device from hw/timer/ to hw/rtc/ subdirectoryPhilippe Mathieu-Daudé
The PL031 is a Real Time Clock, not a timer. Move it under the hw/rtc/ subdirectory. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20191003230404.19384-3-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-10-24hw/timer: Compile devices not target-dependent as common objectPhilippe Mathieu-Daudé
All these devices do not contain any target-specific. While most of them are arch-specific, they are shared between different targets of the same arch family (ARM and AArch64, MIPS32/MIPS64, endianess, ...). Put them into common-obj-y to compile them once for all targets. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20191003230404.19384-2-philmd@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-10-24pci_bridge: fix a typo in commentMao Zhongyi
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190909031446.1331810-1-maozhongyi@cmss.chinamobile.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-10-24hw/timer/slavio_timer: Remove useless check for NULL t->timerPeter Maydell
In the slavio timer device, the ptimer TimerContext::timer is always created by slavio_timer_init(), so there's no need to check it for NULL; remove the single unneeded NULL check. This will be useful to avoid compiler/Coverity errors when a subsequent change adds a use of t->timer before the location we currently do the NULL check. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191021134357.14266-2-peter.maydell@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-24hw/dma/xilinx_axidma.c: Switch to transaction-based ptimer APIPeter Maydell
Switch the xilinx_axidma code away from bottom-half based ptimers to the new transaction-based ptimer API. This just requires adding begin/commit calls around the various places that modify the ptimer state, and using the new ptimer_init() function to create the timer. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20191017132122.4402-4-peter.maydell@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-24hw/timer/xilinx_timer.c: Switch to transaction-based ptimer APIPeter Maydell
Switch the xilinx_timer code away from bottom-half based ptimers to the new transaction-based ptimer API. This just requires adding begin/commit calls around the various places that modify the ptimer state, and using the new ptimer_init() function to create the timer. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20191017132122.4402-3-peter.maydell@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-24hw/net/fsl_etsec/etsec.c: Switch to transaction-based ptimer APIPeter Maydell
Switch the fsl_etsec code away from bottom-half based ptimers to the new transaction-based ptimer API. This just requires adding begin/commit calls around the various places that modify the ptimer state, and using the new ptimer_init() function to create the timer. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20191017132122.4402-2-peter.maydell@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-24target/arm: Rebuild hflags for M-profile NVICRichard Henderson
Continue setting, but not relying upon, env->hflags. Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20191023150057.25731-22-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-24aspeed: Add an AST2600 eval boardCédric Le Goater
Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20191023130455.1347-3-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-24hw/gpio: Fix property accessors of the AST2600 GPIO 1.8V modelCédric Le Goater
The property names of AST2600 GPIO 1.8V model are one character bigger than the names of the other ASPEED GPIO model. Increase the string buffer size by one and be more strict on the expected pattern of the property name. This fixes the QOM test of the ast2600-evb machine under : Apple LLVM version 10.0.0 (clang-1000.10.44.4) Target: x86_64-apple-darwin17.7.0 Thread model: posix InstalledDir: /Library/Developer/CommandLineTools/usr/bin Cc: Rashmica Gupta <rashmica.g@gmail.com> Fixes: 36d737ee82b2 ("hw/gpio: Add in AST2600 specific implementation") Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20191023130455.1347-2-clg@kaod.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-24Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-4.2-20191024' ↵Peter Maydell
into staging ppc patch queue 2019-10-24 Last pull request before soft freeze. * Lots of fixes and cleanups for spapr interrupt controllers * More SLOF updates to fix problems with full FDT rendering at CAS time (alas, more yet are to come) * A few other assorted changes This isn't quite as well tested as I usually try to do before a pull request. But I've been sick and running into some other difficulties, and wanted to get this sent out before heading towards KVM forum. # gpg: Signature made Thu 24 Oct 2019 09:14:31 BST # gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392 # gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full] # gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full] # gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full] # gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown] # Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392 * remotes/dgibson/tags/ppc-for-4.2-20191024: (28 commits) spapr/xive: Set the OS CAM line at reset ppc/pnv: Fix naming of routines realizing the CPUs ppc: Reset the interrupt presenter from the CPU reset handler ppc/pnv: Add a PnvChip pointer to PnvCore ppc/pnv: Introduce a PnvCore reset handler spapr_cpu_core: Implement DeviceClass::reset spapr: move CPU reset after presenter creation spapr: Don't request to unplug the same core twice pseries: Update SLOF firmware image spapr: Move SpaprIrq::nr_xirqs to SpaprMachineClass spapr: Remove SpaprIrq::nr_msis spapr, xics, xive: Move SpaprIrq::post_load hook to backends spapr, xics, xive: Move SpaprIrq::reset hook logic into activate/deactivate spapr: Remove SpaprIrq::init_kvm hook spapr, xics, xive: Match signatures for XICS and XIVE KVM connect routines spapr, xics, xive: Move dt_populate from SpaprIrq to SpaprInterruptController spapr, xics, xive: Move print_info from SpaprIrq to SpaprInterruptController spapr, xics, xive: Move set_irq from SpaprIrq to SpaprInterruptController spapr: Formalize notion of active interrupt controller spapr, xics, xive: Move irq claim and free from SpaprIrq to SpaprInterruptController ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-24Merge remote-tracking branch ↵Peter Maydell
'remotes/ehabkost/tags/machine-next-pull-request' into staging x86 and machine queue, 2019-10-23 Features: * Denverton CPU model (Tao Xu) Cleanups: * Eliminate remaining places that abuse memory_region_allocate_system_memory() (Igor Mammedov) # gpg: Signature made Thu 24 Oct 2019 03:45:34 BST # gpg: using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6 # gpg: issuer "ehabkost@redhat.com" # gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full] # Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6 * remotes/ehabkost/tags/machine-next-pull-request: hppa: drop usage of memory_region_allocate_system_memory() for ROM ppc: rs6000_mc: drop usage of memory_region_allocate_system_memory() sparc64: use memory_region_allocate_system_memory() only for '-m' specified RAM target/i386: Introduce Denverton CPU model Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-24Merge remote-tracking branch 'remotes/xtensa/tags/20191023-xtensa' into stagingPeter Maydell
target/xtensa improvements for v4.2: - regenerate and reimport test_mmuhifi_c3 core; - add virt machine. # gpg: Signature made Wed 23 Oct 2019 23:56:42 BST # gpg: using RSA key 2B67854B98E5327DCDEB17D851F9CC91F83FA044 # gpg: issuer "jcmvbkbc@gmail.com" # gpg: Good signature from "Max Filippov <filippov@cadence.com>" [unknown] # gpg: aka "Max Filippov <max.filippov@cogentembedded.com>" [full] # gpg: aka "Max Filippov <jcmvbkbc@gmail.com>" [full] # Primary key fingerprint: 2B67 854B 98E5 327D CDEB 17D8 51F9 CC91 F83F A044 * remotes/xtensa/tags/20191023-xtensa: hw/xtensa: add virt machine target/xtensa: regenerate and re-import test_mmuhifi_c3 core Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-23hppa: drop usage of memory_region_allocate_system_memory() for ROMIgor Mammedov
machine_hppa_init() violates memory_region_allocate_system_memory() contract by calling it multiple times which could break with -mem-path. Replace the second usage (for 'rom') with memory_region_init_ram() instead. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20191008113318.7012-4-imammedo@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-10-23ppc: rs6000_mc: drop usage of memory_region_allocate_system_memory()Igor Mammedov
rs6000mc_realize() violates memory_region_allocate_system_memory() contract by calling it multiple times which could break -mem-path. Replace it with plain memory_region_init_ram() instead. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20191008113318.7012-3-imammedo@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-10-23sparc64: use memory_region_allocate_system_memory() only for '-m' specified RAMIgor Mammedov
memory_region_allocate_system_memory() was designed to be called for allocating inital RAM. Using it mutiple times within one board is not supported and could fail if -mem-path with non hugepage path is used. Keep using memory_region_allocate_system_memory() only for initial RAM and use memory_region_init_ram() for the rest fixed size regions. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20191008113318.7012-2-imammedo@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-10-24spapr/xive: Set the OS CAM line at resetCédric Le Goater
When a Virtual Processor is scheduled to run on a HW thread, the hypervisor pushes its identifier in the OS CAM line. When running with kernel_irqchip=off, QEMU needs to emulate the same behavior. Set the OS CAM line when the interrupt presenter of the sPAPR core is reset. This will also cover the case of hot-plugged CPUs. This change also has the benefit to remove the use of CPU_FOREACH() which can be unsafe. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org> Message-Id: <20191022163812.330-8-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-10-24ppc/pnv: Fix naming of routines realizing the CPUsCédric Le Goater
The 'vcpu' suffix is inherited from the sPAPR machine. Use better names for PowerNV. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org> Message-Id: <20191022163812.330-7-clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-10-24ppc: Reset the interrupt presenter from the CPU reset handlerCédric Le Goater
On the sPAPR machine and PowerNV machine, the interrupt presenters are created by a machine handler at the core level and are reset independently. This is not consistent and it raises issues when it comes to handle hot-plugged CPUs. In that case, the presenters are not reset. This is less of an issue in XICS, although a zero MFFR could be a concern, but in XIVE, the OS CAM line is not set and this breaks the presenting algorithm. The current code has workarounds which need a global cleanup. Extend the sPAPR IRQ backend and the PowerNV Chip class with a new cpu_intc_reset() handler called by the CPU reset handler and remove the XiveTCTX reset handler which is now redundant. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20191022163812.330-6-clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-10-24ppc/pnv: Add a PnvChip pointer to PnvCoreCédric Le Goater
We will use it to reset the interrupt presenter from the CPU reset handler. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org> Message-Id: <20191022163812.330-5-clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-10-24ppc/pnv: Introduce a PnvCore reset handlerCédric Le Goater
in which individual CPUs are reset. It will ease the introduction of future change reseting the interrupt presenter from the CPU reset handler. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Greg Kurz <groug@kaod.org> Message-Id: <20191022163812.330-4-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-10-24spapr_cpu_core: Implement DeviceClass::resetGreg Kurz
Since vCPUs aren't plugged into a bus, we manually register a reset handler for each vCPU. We also call this handler at realize time to ensure hot plugged vCPUs are reset before being exposed to the guest. This results in vCPUs being reset twice at machine reset. It doesn't break anything but it is slightly suboptimal and above all confusing. The hotplug path in device_set_realized() already knows how to reset a hotplugged device if the device reset handler is present. Implement one for sPAPR CPU cores that resets all vCPUs under a core. While here rename spapr_cpu_reset() to spapr_reset_vcpu() for consistency with spapr_realize_vcpu() and spapr_unrealize_vcpu(). Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> [clg: add documentation on the reset helper usage ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20191022163812.330-3-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-10-24spapr: move CPU reset after presenter creationCédric Le Goater
This change prepares ground for future changes which will reset the interrupt presenter in the reset handler of the sPAPR and PowerNV cores. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20191022163812.330-2-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-18 11:02:16 +0000