aboutsummaryrefslogtreecommitdiff
path: root/hw
AgeCommit message (Collapse)Author
2011-10-14Merge remote-tracking branch 'kwolf/for-anthony' into stagingAnthony Liguori
2011-10-14Merge remote-tracking branch 'stefanha/trivial-patches' into stagingAnthony Liguori
2011-10-14Merge remote-tracking branch 'kraxel/usb.28' into stagingAnthony Liguori
2011-10-14Merge remote-tracking branch 'qemu-kvm-tmp/memory/batch' into stagingAnthony Liguori
2011-10-14arm_pic: Fix typoAndreas Färber
interrput -> interrupt Cc: Paul Brook <paul@codesourcery.com> Signed-off-by: Andreas Färber <andreas.faerber@web.de> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-10-13usb-hub: don't trigger assert on packet completion.Gerd Hoffmann
Calling usb_packet_complete() recursively when passing up the completion event up the chain for devices connected via usb hub will trigger an assert. So don't do that, make the usb hub emulation call the upstream completion callback directly instead. Based on a patch from Stefan Hajnoczi <stefanha@gmail.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-10-13usb-hid: activate usb tablet / mouse after migration.Gerd Hoffmann
qemu uses the ps/2 mouse by default. The usb tablet (or mouse) is activated as soon as qemu sees some guest activity on the device, i.e. polling for HID events. That used to work fine for both fresh boot and migration. Remote wakeup support changed the picture though: There will be no polling after migration in case the guest suspended the usb bus, waiting for wakeup events. Result is that the ps/2 mouse stays active. Fix this by activating the usb tablet / mouse in post_load() in case the guest enabled remote wakeup. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-10-13hw/usb-ohci: Honour endpoint maximum packet sizePeter Maydell
Honour the maximum packet size for endpoints; this applies when sending non-isochronous data and means we transfer only as much as the endpoint allows, leaving the transfer descriptor on the list for another go next time around. This allows usb-net to work when connected to an OHCI controller model. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-10-13hw/usb-ohci: Fix OHCI_TD_T1 bit position definitionPeter Maydell
The OHCI Transfer Descriptor T (DataToggle) bits are 24 and 25; fix an error which accidentally overlaid them both on the same bit. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-10-13usb: fix port resetGerd Hoffmann
commit 891fb2cd4592b6fe76106a69e0ca40efbf82726a removed the implicit detach before (re-)attaching in usb_attach(). Some usb host controllers used that behavior though to do a port reset by a detach+attach sequence. This patch establishes old behavior by adding a new usb_reset() function for port resets and putting it into use, thereby also unifying port reset behavior of all host controllers. The patch also adds asserts to usb_attach() and usb_detach() to make sure the calls are symmetrical. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-10-13usb-hub: need to check dev->attachedGerd Hoffmann
commit 891fb2cd4592b6fe76106a69e0ca40efbf82726a did that for all host controllers, the usb hub was left out by accident. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-10-13usb-storage: fix NULL pointer dereference.Gerd Hoffmann
When a usb packet is canceled we need to check whenever we actually have a scsi request in flight before we try to cancel it. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-10-11isa: Remove isa_init_ioport_range and isa_init_ioportRichard Henderson
All users have been converted to either isa_register_ioport or isa_register_old_portio_list. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-10-11ide: Convert to isa_register_portio_listRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-10-11vmport: Convert to isa_register_ioportRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-10-11pc: Convert port92 to isa_register_ioportRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-10-11vga: Convert to isa_register_portio_listRichard Henderson
[jan: fix cut'n'paste errors] [avi: adjust pci variants not to use isa functions] Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-10-11sb16: Convert to isa_register_portio_listRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-10-11parallel: Convert to isa_register_portio_listRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-10-11ne2000: Convert to isa_register_ioportRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-10-11rtc: Convert to isa_register_ioportRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-10-11m48t59: Convert to isa_register_ioportRichard Henderson
The sysbus interface is as yet unconverted. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-10-11gus: Convert to isa_register_portio_listRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-10-11fdc: Convert to isa_register_portio_listRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-10-11isa: Add isa_register_portio_list()Avi Kivity
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-10-11scsi: Support I/O statusLuiz Capitulino
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-11ide: Support I/O statusLuiz Capitulino
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-11virtio: Support I/O statusLuiz Capitulino
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-10isa: Tidy support code for isabus_get_fw_dev_pathRichard Henderson
The only user of ISADevice.ioports is isabus_get_fw_dev_path, and it only looks at the first entry of the array. Which suggests that this entire array+sort operation can be replaced by a simple minimum. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-10-10ppc_newworld: convert to memory APIAvi Kivity
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-10-10hw/versatile_pci: Expose multiple sysbus mmio regionsPeter Maydell
Clean up versatile_pci to expose the various PCI mmio regions properly as separate mmio regions rather than as a single mmio which uses callbacks to map and unmap everything. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-10-10hw/arm11mpcore: Clean up to avoid using sysbus_mmio_init_cb2Peter Maydell
Clean up the initialisation of the realview_mpcore device to avoid using sysbus_init_mmio_cb2(): we can pass through the MemoryRegion of the private arm11mpcore_priv device directly now. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-10-10ppc405_boards: convert to memory APIAvi Kivity
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-10-10petalogix_s2adsp1800: convert to memory APIAvi Kivity
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-10-10petalogix_ml605: convert to memory APIAvi Kivity
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-10-10palm: convert to memory APIAvi Kivity
Signed-off-by: Avi Kivity <avi@redhat.com>
2011-10-10hw/lan9118.c: Convert to MemoryRegionPeter Maydell
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-10-10Merge remote-tracking branch 'qmp/queue/qmp' into stagingAnthony Liguori
2011-10-10Merge remote-tracking branch 'stefanha/trivial-patches' into stagingAnthony Liguori
2011-10-09Restore consistent formattingmalc
Signed-off-by: malc <av1474@comtv.ru>
2011-10-09Merge remote-tracking branch 'upstream' into memory/batchAvi Kivity
* upstream: (87 commits) target-alpha: Fix compilation errors for 32 bit hosts target-alpha: Add high-resolution access to wall clock and an alarm. target-alpha: Implement HALT IPR. target-alpha: Implement WAIT IPR. target-alpha: Add CLIPPER emulation. target-alpha: Add custom PALcode image for CLIPPER emulation. target-alpha: Honor icount for RPCC instruction. tcg/s390: Remove unused tcg_out_addi() tcg/ia64: Remove unused tcg_out_addi() ARM: fix segfault ppc64: Fix linker script pseries: Implement set-time-of-day RTAS function pseries: Refactor spapr irq allocation PPC: Clean up BookE timer code PPC: booke timers KVM: PPC: Use HIOR setting for -M pseries with PR KVM KVM: Update kernel headers KVM: Update kernel headers PPC: Fix heathrow PIC to use little endian MMIO PPC: Fix via-cuda memory registration ... Conflicts: hw/milkymist-uart.c hw/ppce500_mpc8544ds.c Signed-off-by: Avi Kivity <avi@redhat.com>
2011-10-09target-alpha: Fix compilation errors for 32 bit hostsStefan Weil
On i386, these errors were reported: qemu/hw/alpha_dp264.c: In function ‘clipper_init’: qemu/hw/alpha_dp264.c:158: error: integer constant is too large for ‘unsigned long’ type qemu/hw/alpha_typhoon.c: In function ‘typhoon_init’: qemu/hw/alpha_typhoon.c:737: error: integer constant is too large for ‘long’ type qemu/hw/alpha_typhoon.c:741: error: integer constant is too large for ‘long’ type qemu/hw/alpha_typhoon.c:745: error: integer constant is too large for ‘long’ type qemu/hw/alpha_typhoon.c:749: error: integer constant is too large for ‘long’ type qemu/hw/alpha_typhoon.c:757: error: integer constant is too large for ‘long’ type qemu/hw/alpha_typhoon.c:767: error: integer constant is too large for ‘long’ type qemu/hw/alpha_typhoon.c:772: error: integer constant is too large for ‘long’ type Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-08Merge branch 'axp-system-7' of git://repo.or.cz/qemu/rthBlue Swirl
* 'axp-system-7' of git://repo.or.cz/qemu/rth: target-alpha: Add high-resolution access to wall clock and an alarm. target-alpha: Implement HALT IPR. target-alpha: Implement WAIT IPR. target-alpha: Add CLIPPER emulation. target-alpha: Add custom PALcode image for CLIPPER emulation. target-alpha: Honor icount for RPCC instruction.
2011-10-08target-alpha: Add high-resolution access to wall clock and an alarm.Richard Henderson
The alarm is a fully general one-shot time comparator, which will be usable under Linux as a hrtimer source. It's much more flexible than the RTC source available on real hardware. The wall clock allows the guest access to the host timekeeping. Much like the KVM wall clock source for other guests. Both are accessed via the PALcode Cserve entry point. Signed-off-by: Richard Henderson <rth@twiddle.net>
2011-10-08target-alpha: Add CLIPPER emulation.Richard Henderson
This is a DP264 variant, SMP capable, no unusual hardware present. The emulation does not currently include any PCI IOMMU code. Hopefully the generic support for that can be merged to HEAD soon. Signed-off-by: Richard Henderson <rth@twiddle.net>
2011-10-08Merge branch 'for-upstream' of git://git.serverraum.org/git/mw/qemu-lm32Blue Swirl
* 'for-upstream' of git://git.serverraum.org/git/mw/qemu-lm32: milkymist: new interrupt map milkymist_uart: support new core version lm32: add missing qemu_init_vcpu() call
2011-10-06pseries: Implement set-time-of-day RTAS functionBreno Leitao
Currently there is no implementation for set-time-of-day rtas function, which causes the following warning "setting the clock failed (-1)" on the guest. This patch just creates this function, get the timedate diff and store in the papr environment, so that the correct value will be returned by get-time-of-day. In order to try it, just adjust the hardware time, run hwclock --systohc, so that, on when the system runs hwclock --hctosys, the value is correctly adjusted, i.e. the host time plus the timediff. Signed-off-by: Breno Leitao <brenohl@br.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-10-06pseries: Refactor spapr irq allocationDavid Gibson
Paulo Bonzini changed the original spapr code, which manually assigned irq numbers for each virtual device, to allocate them automatically from the device initialization. That allowed spapr virtual devices to be constructed with -device, which is a good start. However, the way that patch worked doesn't extend nicely for the future when we want to support devices other than sPAPR VIO devices (e.g. virtio and PCI). This patch rearranges the irq allocation to be global across the sPAPR environment, so it can be used by other bus types as well. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-10-06PPC: Clean up BookE timer codeAlexander Graf
The BookE timer code had some written-but-not-read variables. Get rid of them. Signed-off-by: Alexander Graf <agraf@suse.de>
2011-10-06PPC: booke timersFabien Chouteau
While working on the emulation of the freescale p2010 (e500v2) I realized that there's no implementation of booke's timers features. Currently mpc8544 uses ppc_emb (ppc_emb_timers_init) which is close but not exactly like booke (for example booke uses different SPR). Signed-off-by: Fabien Chouteau <chouteau@adacore.com> Signed-off-by: Alexander Graf <agraf@suse.de>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-30 19:12:22 +0000