aboutsummaryrefslogtreecommitdiff
path: root/hw
AgeCommit message (Collapse)Author
2012-08-13xilinx_axi*: Re-implemented interconnectPeter A. G. Crosthwaite
Re-implemented the interconnect between the Xilinx AXI ethernet and DMA controllers. A QOM interface "stream" is created, for the two stream interfaces. As per Edgars request, this is designed to be more generic than AXI-stream, so in the future we may see more clients of this interface beyond AXI stream. This is based primarily on Paolos original refactoring of the interconnect. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Peter A.G. Crosthwaite <peter.crosthwaite@petalogix.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2012-08-11Merge remote-tracking branch 'kwolf/for-anthony' into stagingAnthony Liguori
* kwolf/for-anthony: qemu-iotests: skip 039 with ./check -nocache block: add BLOCK_O_CHECK for qemu-img check qcow2: mark image clean after repair succeeds qed: mark image clean after repair succeeds blockdev: flip default cache mode from writethrough to writeback virtio-blk: disable write cache if not negotiated virtio-blk: support VIRTIO_BLK_F_CONFIG_WCE qemu-iotests: Save some sed processes ahci: Fix sglist memleak in ahci_dma_rw_buf() ahci: Fix ahci cdrom read corruptions for reads > 128k virtio-blk: fix use-after-free while handling scsi commands
2012-08-11Merge remote-tracking branch 'bonzini/scsi-next' into stagingAnthony Liguori
* bonzini/scsi-next: scsi-disk: add support for the UNMAP command scsi-disk: improve out-of-range LBA detection for WRITE SAME scsi-disk: more assertions and resets for aiocb virtio-scsi: do not compare 32-bit QEMU tags against 64-bit virtio-scsi tags iscsi: Pick default initiator-name based on the name of the VM iscsi: reorganize code for parse_initiator_name iscsi: do not leak initiator_name
2012-08-11unicore32-softmmu: Add is_default setting for puv3 machineGuan Xuetao
This patch sets is_default to 1 for puv3 machine, so that find_default_machine() returns puv3 machine. Thanks Dunrong for pointing it out. Cc: Dunrong Huang <riegamaths@gmail.com> Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-08-11unicore32-softmmu: Add ps2 supportGuan Xuetao
This patch adds ps2/keyboard support, and enables CONFIG_PCKBD. Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-08-11unicore32-softmmu: Add puv3 dma supportGuan Xuetao
This patch adds puv3 dma (Direct Memory Access) support, include dma device simulation for kernel booting. v1->v2: Add initialization to ret in puv3_dma_read. Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-08-11unicore32-softmmu: Add puv3 pm supportGuan Xuetao
This patch adds puv3 pm (power management) support, include pm device simulation for kernel booting. Thank Blue Swirl for pointing out the missing "break". v1->v2: Add initialization to ret in puv3_pm_read. Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-08-11unicore32-softmmu: Add puv3 gpio supportGuan Xuetao
This patch adds puv3 gpio (General Purpose Input/Output) support, include gpio device simulation and its interrupt support. v1->v2: Add initialization to ret in puv3_gpio_read. Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-08-11unicore32-softmmu: Add puv3 ostimer supportGuan Xuetao
This patch adds puv3 ostimer support, include os timer device simulation and ptimer support in puv3 machine. Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-08-11unicore32-softmmu: Add puv3 interrupt supportGuan Xuetao
This patch adds puv3 interrupt support, include interrupt controler device simulation and interrupt handler in puv3 machine. Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-08-11unicore32-softmmu: Add puv3 soc/board supportGuan Xuetao
This patch only add puv3 soc/board support, which introduces puv3 machine description, and specifies console type. Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-08-11unicore32-softmmu: Add unicore32-softmmu build supportGuan Xuetao
This patch adds unicore32-softmmu build support, include configure, makefile, arch_init, and all missing functions needed by softmmu. Although all missing functions are empty, unicore32-softmmu could be build successfully. By 20120804: change QEMU_ARCH_UNICORE32 to 0x4000 Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-08-10virtio-blk: disable write cache if not negotiatedPaolo Bonzini
If the guest does not support flushes, we should run in writethrough mode. The setting is temporary until the next reset, so that for example the BIOS will run in writethrough mode while Linux will run with a writeback cache. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-08-10virtio-blk: support VIRTIO_BLK_F_CONFIG_WCEPaolo Bonzini
Also rename VIRTIO_BLK_F_WCACHE to VIRTIO_BLK_F_WCE for consistency with the spec. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-08-10ahci: Fix sglist memleak in ahci_dma_rw_buf()Jason Baron
I noticed that in hw/ide/ahci:ahci_dma_rw_buf() we do not free the sglist. Thus, I've added a call to qemu_sglist_destroy() to fix this memory leak. In addition, I've adeed a call in qemu_sglist_destroy() to 0 all of the sglist fields, in case there is some other codepath that tries to free the sglist. Signed-off-by: Jason Baron <jbaron@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-08-10ahci: Fix ahci cdrom read corruptions for reads > 128kJason Baron
While testing q35, which has its cdrom attached to the ahci controller, I found that the Fedora 17 install would panic on boot. The panic occurs while squashfs is trying to read from the cdrom. The errors are: [ 8.622711] SQUASHFS error: xz_dec_run error, data probably corrupt [ 8.625180] SQUASHFS error: squashfs_read_data failed to read block 0x20be48a I was also able to produce corrupt data reads using an installed piix based qemu machine, using 'dd'. I found that the corruptions were only occuring when then read size was greater than 128k. For example, the following command results in corrupted reads: dd if=/dev/sr0 of=/tmp/blah bs=256k iflag=direct The > 128k size reads exercise a different code path than 128k and below. In ide_atapi_cmd_read_dma_cb() s->io_buffer_size is capped at 128k. Thus, ide_atapi_cmd_read_dma_cb() is called a second time when the read is > 128k. However, ahci_dma_rw_buf() restart the read from offset 0, instead of at 128k. Thus, resulting in a corrupted read. To fix this, I've introduced 'io_buffer_offset' field in IDEState to keep track of the offset. I've also modified ahci_populate_sglist() to take a new 3rd offset argument, so that the sglist is property initialized. I've tested this patch using 'dd' testing, and Fedora 17 now correctly boots and installs on q35 with the cdrom ahci controller. Signed-off-by: Jason Baron <jbaron@redhat.com> Tested-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-08-10virtio-blk: fix use-after-free while handling scsi commandsAvi Kivity
The scsi passthrough handler falls through after completing a request into the failure path, resulting in a use after free. Reproducible by running a guest with aio=native on a block device. Reported-by: Stefan Priebe <s.priebe@profihost.ag> Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-08-09target-xtensa: make 'sim' to be the default machineMax Filippov
This fixes the following error: $ qemu-system-xtensa -cpu help Segmentation fault Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-08-09target-xtensa: make default CPU depend on target endiannessMax Filippov
This makes usable default for -cpu option both for qemu-system-xtensa and qemu-system-xtensaeb fixing the following error: $ qemu-system-xtensaeb -M sim Unable to find CPU definition Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Tested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-08-09scsi-bus: remove overlapping entryBlue Swirl
LOAD_UNLOAD and START_STOP have same value, so the table entry is initialized twice. Spotted by Clang compiler. Remove LOAD_UNLOAD entry since START_STOP entry already represents both. Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-08-09xilinx_axienet: avoid useless self-assignmentBlue Swirl
Statement s=s; makes little sense, remove it. Spotted by Clang compiler. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-08-09sparc: fix floppy TC line setupBlue Swirl
The qemu_irq for Terminal Count (TC) line between FDC and Slavio misc device was created only after use, spotted by Clang compiler. Also, it was not created if the FDC didn't exist. Rearrange code to fix order. Always create the TC line. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-08-09esp: add Tekram DC-390 emulation (PC SCSI adapter)Hervé Poussineau
Difference with AMD PCscsi is that DC-390 contains a EEPROM, and that a romfile is available to add INT13 support. This has been successfully tested on: - MS DOS 6.22 (using DC390 ASPI driver) - MS Windows 98 SE (using DC390 driver) - MS Windows NT 3.1 (using DC390 driver) - MS Windows NT 4.0 (using DC390 driver) - hard disk and cdrom boot Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-08-09Revert "pci: add some stubs"Hervé Poussineau
This reverts commit 0883c5159f1df05d8761014f65451c3c3b77ebcf. Those stubs were only used by PCI ESP emulation, which is now not compiled on architectures which have no PCI bus support. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-08-09esp: move PCI emulation to a new file esp-pci.cHervé Poussineau
sparc machines loose ability to instanciate PCI ESP SCSI adapter, which is not a big loose as they don't have PCI bus support. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-08-09esp: move some definitions to header fileHervé Poussineau
These will be used by next commits. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-08-09scsi-disk: add support for the UNMAP commandPaolo Bonzini
The unmap command can reuse the same infrastructure as MODE SELECT for reading the descriptor list into memory. The descriptors are processed sequentially. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-08-09scsi-disk: improve out-of-range LBA detection for WRITE SAMEPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-08-09scsi-disk: more assertions and resets for aiocbPaolo Bonzini
Leaving the aiocb to a non-NULL value leads to an assertion failure when rerror/werror are set to stop or enospc, and the operation is retried. scsi-disk checks that the aiocb member is NULL before filling it. This patch correctly resets the aiocb to NULL values everywhere, and adds the dual assertion that the aiocb was non-NULL before calling bdrv_acct_done. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-08-09virtio-scsi: do not compare 32-bit QEMU tags against 64-bit virtio-scsi tagsPaolo Bonzini
This patch fixes a problem in handling task management functions in virtio-scsi. The cause of the problem is a mismatch between the size of the tag in QEMU (32-bit) and virtio-scsi (64-bit). Changing the QEMU size is hard because the migration format uses 32 bits to store the tag; so just don't use the QEMU tag (virtio-scsi only uses the tag for task management functions anyway) and look up the full 64-bit tag in the hba_private field. The reproducer is a bit obscure. If you cause an I/O timeout (for example with rerror=stop and doing 'cont' on the monitor continuously without fixing the error), sooner or later the guest will try to abort the command and reissue it. At this point, QEMU will report _two_ errors instead of one when you hit 'c', because the first error has not been canceled correctly. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-08-07Merge remote-tracking branch 'kraxel/usb.58' into stagingAnthony Liguori
* kraxel/usb.58: usb-storage: fix SYNCHRONIZE_CACHE usb-storage: improve debug logging
2012-08-07usb-storage: fix SYNCHRONIZE_CACHEGerd Hoffmann
Commit 59310659073d85745854f2f10c4292555c5a1c51 is incomplete, we'll arrive in the scsi command complete callback in CSW state and must handle that case correctly. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-08-07usb-storage: improve debug loggingGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-08-06ide scsi: Mess with geometry only for hard disk devicesMarkus Armbruster
Legacy -drive cyls=... are now ignored completely when the drive doesn't back a hard disk device. Before, they were first checked against a hard disk's limits, then ignored. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-08-06virtio: fix vhost handlingPaolo Bonzini
Commit b1f416aa8d870fab71030abc9401cfc77b948e8e breaks vhost_net because it always registers the virtio_pci_host_notifier_read() handler function on the ioeventfd, even when vhost_net.ko is using the ioeventfd. The result is both QEMU and vhost_net.ko polling on the same eventfd and the virtio_net.ko guest driver seeing inconsistent results: # ifconfig eth0 192.168.0.1 netmask 255.255.255.0 virtio_net virtio0: output:id 0 is not a head! To fix this, proceed the same as we do for irqfd: add a parameter to virtio_queue_set_host_notifier_fd_handler and in that case only set the notifier, not the handler. Cc: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Tested-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-08-04Fixes related to processing of qemu's -numa optionChegu Vinod
The -numa option to qemu is used to create [fake] numa nodes and expose them to the guest OS instance. There are a couple of issues with the -numa option: a) Max VCPU's that can be specified for a guest while using the qemu's -numa option is 64. Due to a typecasting issue when the number of VCPUs is > 32 the VCPUs don't show up under the specified [fake] numa nodes. b) KVM currently has support for 160VCPUs per guest. The qemu's -numa option has only support for upto 64VCPUs per guest. This patch addresses these two issues. Below are examples of (a) and (b) a) >32 VCPUs are specified with the -numa option: /usr/local/bin/qemu-system-x86_64 \ -enable-kvm \ 71:01:01 \ -net tap,ifname=tap0,script=no,downscript=no \ -vnc :4 ... Upstream qemu : -------------- QEMU 1.1.50 monitor - type 'help' for more information (qemu) info numa 6 nodes node 0 cpus: 0 1 2 3 4 5 6 7 8 9 32 33 34 35 36 37 38 39 40 41 node 0 size: 131072 MB node 1 cpus: 10 11 12 13 14 15 16 17 18 19 42 43 44 45 46 47 48 49 50 51 node 1 size: 131072 MB node 2 cpus: 20 21 22 23 24 25 26 27 28 29 52 53 54 55 56 57 58 59 node 2 size: 131072 MB node 3 cpus: 30 node 3 size: 131072 MB node 4 cpus: node 4 size: 131072 MB node 5 cpus: 31 node 5 size: 131072 MB With the patch applied : ----------------------- QEMU 1.1.50 monitor - type 'help' for more information (qemu) info numa 6 nodes node 0 cpus: 0 1 2 3 4 5 6 7 8 9 node 0 size: 131072 MB node 1 cpus: 10 11 12 13 14 15 16 17 18 19 node 1 size: 131072 MB node 2 cpus: 20 21 22 23 24 25 26 27 28 29 node 2 size: 131072 MB node 3 cpus: 30 31 32 33 34 35 36 37 38 39 node 3 size: 131072 MB node 4 cpus: 40 41 42 43 44 45 46 47 48 49 node 4 size: 131072 MB node 5 cpus: 50 51 52 53 54 55 56 57 58 59 node 5 size: 131072 MB b) >64 VCPUs specified with -numa option: /usr/local/bin/qemu-system-x86_64 \ -enable-kvm \ -cpu Westmere,+rdtscp,+pdpe1gb,+dca,+pdcm,+xtpr,+tm2,+est,+smx,+vmx,+ds_cpl,+monitor,+dtes64,+pclmuldq,+pbe,+tm,+ht,+ss,+acpi,+d-vnc :4 ... Upstream qemu : -------------- only 63 CPUs in NUMA mode supported. only 64 CPUs in NUMA mode supported. QEMU 1.1.50 monitor - type 'help' for more information (qemu) info numa 8 nodes node 0 cpus: 6 7 8 9 38 39 40 41 70 71 72 73 node 0 size: 65536 MB node 1 cpus: 10 11 12 13 14 15 16 17 18 19 42 43 44 45 46 47 48 49 50 51 74 75 76 77 78 79 node 1 size: 65536 MB node 2 cpus: 20 21 22 23 24 25 26 27 28 29 52 53 54 55 56 57 58 59 60 61 node 2 size: 65536 MB node 3 cpus: 30 62 node 3 size: 65536 MB node 4 cpus: node 4 size: 65536 MB node 5 cpus: node 5 size: 65536 MB node 6 cpus: 31 63 node 6 size: 65536 MB node 7 cpus: 0 1 2 3 4 5 32 33 34 35 36 37 64 65 66 67 68 69 node 7 size: 65536 MB With the patch applied : ----------------------- QEMU 1.1.50 monitor - type 'help' for more information (qemu) info numa 8 nodes node 0 cpus: 0 1 2 3 4 5 6 7 8 9 node 0 size: 65536 MB node 1 cpus: 10 11 12 13 14 15 16 17 18 19 node 1 size: 65536 MB node 2 cpus: 20 21 22 23 24 25 26 27 28 29 node 2 size: 65536 MB node 3 cpus: 30 31 32 33 34 35 36 37 38 39 node 3 size: 65536 MB node 4 cpus: 40 41 42 43 44 45 46 47 48 49 node 4 size: 65536 MB node 5 cpus: 50 51 52 53 54 55 56 57 58 59 node 5 size: 65536 MB node 6 cpus: 60 61 62 63 64 65 66 67 68 69 node 6 size: 65536 MB node 7 cpus: 70 71 72 73 74 75 76 77 78 79 Signed-off-by: Chegu Vinod <chegu_vinod@hp.com>, Jim Hull <jim.hull@hp.com>, Craig Hada <craig.hada@hp.com> Tested-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-08-04build: Fix build breakage detected by buildbotDunrong Huang
More details: http://buildbot.b1-systems.de/qemu/builders/xen_unstable/builds/83/steps/compile/logs/stdio VLANState has been removed since commit a005d07, so "vlan id" should be fetched using net_hub_id_for_client(). Signed-off-by: Dunrong Huang <riegamaths@gmail.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-08-03Merge remote-tracking branch 'bonzini/scsi-next' into stagingAnthony Liguori
* bonzini/scsi-next: scsi: add support for ATA_PASSTHROUGH_xx scsi command esp: add missing const on TypeInfo structures esp: enable for all PCI machines Revert "megasas: disable due to build breakage" megasas: static SAS addresses scsi-disk: fix compilation with DEBUG_SCSI megasas: Update function megasys_scsi_uninit SCSI: STARTSTOPUNIT only eject/load media if powercondition is 0 SCSI: Update the sense code for PREVENT REMOVAL errors
2012-08-03scsi: add support for ATA_PASSTHROUGH_xx scsi commandCong Meng
Correct the command names of opcode 0x85 and 0xa1, and calculate their xfer size from CDB. Signed-off-by: Cong Meng <mc@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-08-03Merge remote-tracking branch 'stefanha/net' into stagingAnthony Liguori
* stefanha/net: net: add the support for -netdev socket, listen net: fix the coding style hub: add the support for hub own flow control net: determine if packets can be sent before net queue deliver packets net: cleanup deliver/deliver_iov func pointers net: Make "info network" output more readable info net: Rename qemu_del_vlan_client() to qemu_del_net_client() net: Rename vc local variables to nc net: Rename VLANClientState to NetClientState net: Rename non_vlan_clients to net_clients net: Remove VLANState net: Remove vlan code from net.c net: Convert qdev_prop_vlan to peer with hub net: Drop vlan argument to qemu_new_net_client() hub: Check that hubs are configured correctly net: Look up 'vlan' net clients using hubs net: Use hubs for the vlan feature net: Add a hub net client net: Add interface to bridge when SIOCBRADDIF isn't available
2012-08-03Merge remote-tracking branch 'aneesh/for-upstream' into stagingAnthony Liguori
* aneesh/for-upstream: hw/9pfs: Fix assert when disabling migration configure: Fix build with capabilities
2012-08-03esp: add missing const on TypeInfo structuresHervé Poussineau
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-08-03megasas: static SAS addressesHannes Reinecke
This patch introduces a new property 'sas_address' which allows the user to specify the SAS address for the HBA. The default address is following the NAA locally assigned identifier format with the locally assigned address 0x525400 as used eg for the MAC addresses. The lower bytes are set to the pci address which will ensure uniqueness for the local machine. The port addresses are now calculated based on the magic number 0x1221 (which is found in real hardware, too) plus the device number. Signed-off-by: Hannes Reinecke <hare@suse.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Andreas Faerber <afaerber@suse.de> Cc: Anthony Liguori <anthony@codemonkey.ws> Cc: Alexander Graf <agraf@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-08-03scsi-disk: fix compilation with DEBUG_SCSIPaolo Bonzini
Reported-by: Gerhard Wiesinger <lists@wiesinger.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-08-03megasas: Update function megasys_scsi_uninitStefan Weil
Commit f90c2bcdbc69e41e575f868b984c3e2de8f51bac changed PCIUnregisterFunc, therefore the function prototype needs an update. megasas.o is currently not linked, so this bug was not detected by the buildbots. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-08-03SCSI: STARTSTOPUNIT only eject/load media if powercondition is 0Ronnie Sahlberg
The START STOP UNIT command will only eject/load media if power condition is zero. If power condition is !0 then LOEJ and START will be ignored. From MMC (sbc contains similar wordings too) The Power Conditions field requests the block device to be placed in the power condition defined in Table 558. If this field has a value other than 0h then the Start and LoEj bits shall be ignored. Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-08-03SCSI: Update the sense code for PREVENT REMOVAL errorsRonnie Sahlberg
Change the sense codes for failures to eject a device that is locked by PREVENT_ALLOW_MEDIUM_REMOVAL from the generic MEDIA_LOAD_OR_EJECT_FAILED to the more specific MEDIUM_REMOVAL_PREVENTED. The second sense code is more accurate, and is also listed in MMC annex F for the recommended sense codes for MMC devices while the first sense code is not. Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-08-02Support 'help' as a synonym for '?' in command line optionsPeter Maydell
For command line options which permit '?' meaning 'please list the permitted values', add support for 'help' as a synonym, by abstracting the check out into a helper function. This change means that in some cases where we were being lazy in our string parsing, "?junk" will now be rejected as an invalid option rather than being (undocumentedly) treated the same way as "?". Update the documentation to use 'help' rather than '?', since '?' is a shell metacharacter and thus prone to fail confusingly if there is a single character filename in the current working directory and the '?' has not been escaped. It's therefore better to steer users towards 'help', though '?' is retained for backwards compatibility. We do not, however, update the output of the system emulator's -help (or any documentation autogenerated from the qemu-options.hx which is the source of the -help text) because libvirt parses our -help output and will break. At a later date when QEMU provides a better interface so libvirt can avoid having to do this, we can update the -help text too. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-08-01target-i386: move cpu_reset and reset callback to cpu.cIgor Mammedov
Moving reset callback into cpu object from board level and resetting cpu at the end of x86_cpu_realize() will allow properly create cpu object during run-time (hotplug) without calling reset externaly. When reset over QOM hierarchy is implemented, reset callback should be removed. v2: - leave cpu_reset in pc_new_cpu() for now, it's to be cleaned up when APIC init is moved in cpu.c Signed-off-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-08-01target-i386: move cpu halted decision into x86_cpu_resetIgor Mammedov
MP initialization protocol differs between cpu families, and for P6 and onward models it is up to CPU to decide if it will be BSP using this protocol, so try to model this. However there is no point in implementing MP initialization protocol in qemu. Thus first CPU is always marked as BSP. This patch: - moves decision to designate BSP from board into cpu, making cpu self-sufficient in this regard. Later it will allow to cleanup hw/pc.c and remove cpu_reset and wrappers from there. - stores flag that CPU is BSP in IA32_APIC_BASE to model behavior described in Inted SDM vol 3a part 1 chapter 8.4.1 - uses MSR_IA32_APICBASE_BSP flag in apic_base for checking if cpu is BSP patch is based on Jan Kiszka's proposal: http://thread.gmane.org/gmane.comp.emulators.qemu/100806 Signed-off-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-23 07:16:12 +0000