aboutsummaryrefslogtreecommitdiff
path: root/hw
AgeCommit message (Collapse)Author
2013-03-01hw: move boards and other isolated files to hw/ARCHPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-01ppc: express FDT dependency of pSeries and e500 boards via default-configs/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-01build: always link device_tree.o into emulators if libfdt availablePaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-01hw: include hw header files with full pathsPaolo Bonzini
Done with this script: cd hw for i in `find . -name '*.h' | sed 's/^..//'`; do echo '\,^#.*include.*["<]'$i'[">], s,'$i',hw/&,' done | sed -i -f - `find . -type f` This is so that paths remain valid as files are moved. Instead, files in hw/dataplane are referenced with the relative path. We know they are not going to move to include/, and they are the only include files that are in subdirectories _and_ move. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-01ppc: do not use ../ in include filesPaolo Bonzini
This simplifies the scripted execution of the next patch. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-01vt82c686: vt82c686 is not a PCI host bridgePaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-01virtio-9p: remove PCI dependencies from hw/9pfs/Paolo Bonzini
Also move the 9p.h file to 9pfs/virtio-9p-device.h, for consistency with the corresponding .c file. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-01virtio-9p: use CONFIG_VIRTFS, not CONFIG_LINUXPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-01hw: move device-hotplug.o to toplevel, compile it oncePaolo Bonzini
The situation with device-hotplug.c is similar to qdev-monitor.c. Add a stub for pci_drive_hot_add, so that it can be compiled once, and move it out of hw/. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-01hw: move qdev-monitor.o to toplevel directoryPaolo Bonzini
qdev-monitor.c is the only "core qdev" file that is not used in user-mode emulation, and it does not define anything that is used by hardware models. Remove it from the hw/ directory and remove hw/qdev-monitor.h from hw/qdev.h too; this requires some files to have some new explicitly includes. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-01hw: move fifo.[ch] to libqemuutilPaolo Bonzini
fifo.c is generic code that can be easily unit tested. So it belongs in libqemuutil. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-01hw: move char backends to backends/Paolo Bonzini
Braille and msmouse support is in hw/, but it is not hardware. Move it to the backends/ directory. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-02-28cadence_gem: Add debug msgs for rx desc movementPeter Crosthwaite
Add some helpful messages that show the rx descriptor pointer moving as packets are rxed. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 1ef2eb34dade64d589a69a2bcfd5aaddb7d50164.1360901435.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-02-28cadence_gem: Don't reset rx desc pointer on rx_enPeter Crosthwaite
This doesn't happen in the real hardware. The Zynq TRM explicitly states that this bit has no effect on the rx descriptor pointer ("The receive queue pointer register is unaffected"). Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 06fdf92b78ee62d8965779bafd29c8df1a5d2718.1360901435.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-02-28cadence_gem: fix interrupt eventsPeter Crosthwaite
Bits in the ISR were continually mirroring their corresponding TX/RX SR bits. This is incorrect. The ISR bits are only ever set at the time their corresponding event occurs. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: cedfb6d108318846480b416a6041023ea5a353d6.1360901435.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-02-28cadence_gem: factor out can_rx() logic replicationPeter Crosthwaite
The gem_receive() function replicates the logic for whether or not the device can rx. Just call the actual gem_can_receive() function in place. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: bf7f93969f3e01fbc76d68d2955307fdbad11bb1.1360901435.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-02-28cadence_gem: Flush queued packetsPeter Crosthwaite
The device needs to check for queued RX packets when the RX path is re-enabled. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 1fa8c88a3b7c654886d0a7484c2463cd4c2a2781.1360901435.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-02-28m25p80.c: Use QOM classes for part differentiationPeter Crosthwaite
Currently, M25P80 uses an object property to differentiate between flash parts. Changed this over to use QOM sub-classes - the actual names of the different parts are used to create a set of dynamic classes which passes the part info as class data. The object no longer needs to search the known_devices table for itself, instead it just gets its info from its own class. Kept the intermediate class definition private to m25p80.c for the moment, as the expectation is parts will only be added as new entries in the table. We can factor out the TYPE_M25P80 abstraction into a header on a demand basis. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: e24e156d-ff96-4901-997a-e31178b08bee@VA3EHSMHS021.ehs.local Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-02-28xilinx_zynq: Added SD controllersPeter Crosthwaite
The Xilinx Zynq device has two SDHCI controllers. Added to the machine model. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-02-28hw/sdhci: introduce standard SD host controllerIgor Mitsyanko
Device model for standard SD Host Controller Interface (SDHCI) compliant with version 2.00 of SD association specification. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Igor Mitsyanko <i.mitsyanko@samsung.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-02-28arm: a9mpcore: Coreify the SCUPeter Crosthwaite
Split the SCU in a9mpcore out into its own object definition. mpcore is now just a container for the mpcore components. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-02-28arm: a9mpcore: remove old_timer_status fieldPeter Crosthwaite
This field was write only and thus unused. Removed. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-02-28arm: mptimer: Remove WDT distinctionPeter Crosthwaite
In QEMU emulation, there is no functional difference between the ARM mpcore private timers and watchdogs. Removed all the distinction between the two from arm_mptimer.c and converted it to be just the mptimer. a9mpcore and arm11mpcore just instantiate the same mptimer object twice to get both timer and WDT. If in the future we want to make the WDT functionally different then we can use either QOM hierarchy to derive WDT from from mptimer, or we can add a property "is-wdt" or some such. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-02-28arm: arm11mpcore, a9mpcore: CamelCased type namesPeter Crosthwaite
To conform with QEMU coding style. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-02-28arm: mptimer: CamelCased type namesPeter Crosthwaite
Trivial find replace on type names "timerblock" and "arm_mptimer_state" to conform with QEMU coding style. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-02-28hw/pflash_cfi01: Treat read in unknown command state as readPeter Maydell
The code for handling the default "unknown command state" case in pflash_read in pflash_cfi01.c comments "reset state & treat it as a read". However the code doesn't actually do this. Moving the default case to the top of the switch so it can fall through into the read case brings this file into line with pflash_cfi02 and makes the code behave as the comments suggest. The pflash_cfi01 code has always had this bug -- it was presumably introduced when the original author copied the cfi02 code and rearranged the order of the switch statement without noticing that the default case relied on the fall-through. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Tested-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 1358777318-7579-3-git-send-email-peter.maydell@linaro.org
2013-02-28hw/pflash_cfi01: Make read after byte-write or erase return statusPeter Maydell
The Intel flash command set requires that a read operation after doing a 'single byte write' command returns the status register; add this case to pflash_read() so we return the correct information. Similarly, the case for the 0x28 flavour of block erase was missing. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Tested-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 1358777318-7579-2-git-send-email-peter.maydell@linaro.org
2013-02-28hw/ds1338: Fix conversion between 12 hours and 24 hours modes.Antoine Mathys
The proper mapping between 24 hours and 12 hours modes is: 0 12 AM 1-11 1-11 AM 12 12 PM 13-23 1-11 PM Fix code accordingly. Signed-off-by: Antoine Mathys <barsamin@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-02-26Merge remote-tracking branch 'kwolf/for-anthony' into stagingAnthony Liguori
# By Paolo Bonzini (7) and others # Via Kevin Wolf * kwolf/for-anthony: (22 commits) pc: add compatibility machine types for 1.4 blockdev: enable discard by default qemu-nbd: add --discard option blockdev: add discard suboption to -drive block: implement BDRV_O_UNMAP block: complete all IOs before .bdrv_truncate coroutine: trim down nesting level in perf_nesting test coroutine: move pooling to common code qemu-iotests: Test qcow2 image creation options qemu-iotests: Add qemu-img compare test qemu-img: Add compare subcommand qemu-img: Add "Quiet mode" option block: Add synchronous wrapper for bdrv_co_is_allocated_above block: refuse negative iops and bps values block: use Error in do_check_io_limits() qcow2: support compressed clusters in BlockFragInfo qemu-img: add compressed clusters to BlockFragInfo qemu-img: fix missing space in qemu-img check output qcow2: record fragmentation statistics during check qcow2: introduce check_refcounts_l1/l2() flags ...
2013-02-23grlib-apbuart: Add support of various flagsRonald Hecht
- enable/disable Rx and Tx - Rx and Tx interrupt - Tx FIFO empty and Tx SHIFT empty Signed-off-by: Fabien Chouteau <chouteau@adacore.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-23Typo: replace gptimer by apbuartFabien Chouteau
Signed-off-by: Fabien Chouteau <chouteau@adacore.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-23xhci: fix bad print specifierHervé Poussineau
This fixes the following compilation error: hw/usb/hcd-xhci.c:1156:17: error: format ‘%llx’ expects argument of type ‘long long unsigned int’, but argument 4 has type ‘unsigned int’ Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Reviewed-by: Stefan Weil <sw@weilnetz.de> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-22pc: add compatibility machine types for 1.4Paolo Bonzini
Adds both pc-i440fx-1.4 and pc-q35-1.4. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-02-22blockdev: enable discard by defaultPaolo Bonzini
Because discard is now a host parameter, we can always fake it as enabled in the guest. This is an extension of the current choice to ignore "not supported" errors from the host when discard_granularity is set to nonzero. The default granularity is set to the logical block size or 4k, whichever is largest, because cluster sizes below 4k are rarely used and 4K is a typical block size for files. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-02-22unbreak hw/usb/redirect.c buildGerd Hoffmann
Commit 8550a02d1239415342959f6a32d178bc05c557cc added a streams parameter to usb_wakeup and didn't update redirect.c. Fix it. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-21vga: fix byteswapping.Gerd Hoffmann
In case host and guest endianness differ the vga code first creates a shared surface (using qemu_create_displaysurface_from), then goes patch the surface format to indicate that the bytes must be swapped. The switch to pixman broke that hack as the format patching isn't propagated into the pixman image, so ui code using the pixman image directly (such as vnc) uses the wrong format. Fix that by adding a byteswap parameter to qemu_create_displaysurface_from, so we'll use the correct format when creating the surface (and the pixman image) and don't have to patch the format afterwards. [ v2: unbreak xen build ] Cc: qemu-stable@nongnu.org Cc: mark.cave-ayland@ilande.co.uk Cc: agraf@suse.de Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 1361349432-23884-1-git-send-email-kraxel@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-21Merge remote-tracking branch 'kraxel/usb.78' into stagingAnthony Liguori
# By Gerd Hoffmann # Via Gerd Hoffmann * kraxel/usb.78: uas-uas: usb3 streams usb-xhci: usb3 streams usb-core: usb3 streams usb: fix endpoint descriptor ordering usb-redir: simplify packet copy usb: make usb_packet_copy operate on combined packets usb: add usb_ep_set_halted usb-host: remove usb_host_device_close usb-host: move legacy cmd line bits usb-storage: use scsi_req_enqueue return value allow disabling usb smartcard support make usb devices configurable fix scripts/make_device_config.sh usb: Makefile cleanup
2013-02-21ppc: fix bamboo >256MB RAM initialization in hw/ppc4xx_devs.cAlin Tomescu
I was trying to launch a PowerPC "bamboo" machine with more than 256MB of RAM with qemu-system-ppc -M bamboo -kernel $kernel -initrd $ramdisk -m 512, but QEMU would just hang. However, when I used -m 256, the machine would boot. I looked through the code in hw/ and it seems there is an error when the RAM memory is setup (if my understanding is correct). After patching it, the machine launched and booted successfully with 512MB of RAM. Signed-off-by: Alin Tomescu <tomescu.alin@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-21xilinx_axienet.c: Assert no error when making linkPeter Crosthwaite
This gives an awful silent failure when it doesn't work. Assert against link creation failure. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-19uas-uas: usb3 streamsGerd Hoffmann
Add usb3 streams support to the uas (usb attached scsi) emulation. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-02-19usb-xhci: usb3 streamsGerd Hoffmann
Add streams support to the xhci emulation. No secondary streams yet, only linear stream arays are supported for now. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-02-19usb-core: usb3 streamsGerd Hoffmann
This patch adds support for usb3 streams to the usb subsystem core. This is just adding a streams field / parameter in a number of places. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-02-19usb: fix endpoint descriptor orderingGerd Hoffmann
Fix the ordering of the endpoint descriptors for superspeed endpoints: The superspeed companion must come first, possible additional descriptors for the endpoint after that. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-02-19usb-redir: simplify packet copyGerd Hoffmann
usb_packet_copy can handle combined packets now, so it isn't needed to special-case them any more. Also use the new usb_packet_size() function. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-02-19usb: make usb_packet_copy operate on combined packetsGerd Hoffmann
Likewise usb_packet_skip. Also usb_packet_size. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-02-19usb: add usb_ep_set_haltedGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-02-19usb-host: remove usb_host_device_closeGerd Hoffmann
Nobody implements that anyway. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-02-19usb-host: move legacy cmd line bitsGerd Hoffmann
The code handling the "-usbdevice host:..." legacy command line syntax is moved to the new hw/usb/host-legacy.c file. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-02-19usb-storage: use scsi_req_enqueue return valueGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-02-19allow disabling usb smartcard supportGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-28 22:45:57 +0000