| Age | Commit message (Collapse) | Author |
|---|
|
We're going to remove the callback, so we can't use it to save the
address. Use the pci API instead.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Some (hacky) devices that have a back-channel to read this
address back outside the normal configuration mechanisms, such
as VMware svga.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
qbus_reset_all_fn was registered twice, so a lot of device reset
functions were also called twice when QEMU started.
Which was introduced by 80376c3fc2c38fdd45354e4b0eb45031f35587ed
This patch fixes it by making the main_system_bus creation not register
reset handler.
Cc: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Tested-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
When compiling with gcc 4.6, some code in fw_cfg.c complains that fop_ret
is assigned but not used (which is true). However, it looks like the
meaningless assignments to fop_ret were done to suppress other gcc warnings
due to the fact that fread() is labelled as warn_unused_result in glibc.
This patch avoids both errors, by actually checking the fread() result code
and dropping out with an error message if it fails.
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Tested-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
|
|
|
|
|
|
|
|
Migrating after unplugging a virtio-balloon device resulted in an error
message on the destination:
Unknown savevm section or instance '0000:00:04.0/virtio-balloon' 0
load of migration failed
Fix this by unregistering the section on device unplug.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Add an exit handler that will free up RAM after a virtio-balloon device
is unplugged.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Multiple balloon registrations are not allowed; check if the
registration with the qemu balloon api succeeded. If not, fail the
device init.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Signed-off-by: Amit Shah <amit.shah@redhat.com>
|
|
Passing on '0' as ballooning target to indicate retrieval of stats is
bad API. It also makes 'balloon 0' in the monitor cause a segfault.
Have two different functions handle the different functionality instead.
Detailed explanation from Markus's review:
1. do_info_balloon() is an info_async() method. It receives a callback
with argument, to be called exactly once (callback frees the
argument). It passes the callback via qemu_balloon_status() and
indirectly through qemu_balloon_event to virtio_balloon_to_target().
virtio_balloon_to_target() executes its balloon stats half. It
stores the callback in the device state.
If it can't send a stats request, it resets stats and calls the
callback right away.
Else, it sends a stats request. The device model runs the callback
when it receives the answer.
Works.
2. do_balloon() is a cmd_async() method. It receives a callback with
argument, to be called when the command completes. do_balloon()
calls it right before it succeeds. Odd, but should work.
Nevertheless, it passes the callback on via qemu_ballon() and
indirectly through qemu_balloon_event to virtio_balloon_to_target().
a. If the argument is non-zero, virtio_balloon_to_target() executes
its balloon half, which doesn't use the callback in any way.
Odd, but works.
b. If the argument is zero, virtio_balloon_to_target() executes its
balloon stats half, just like in 1. It either calls the callback
right away, or arranges for it to be called later.
Thus, the callback runs twice: use after free and double free.
Test case: start with -S -device virtio-balloon, execute "balloon 0" in
human monitor. Runs the callback first from virtio_balloon_to_target(),
then again from do_balloon().
Reported-by: Mike Cao <bcao@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
|
|
Separate out the code to retrieve balloon info from the code that sets
balloon values.
This will be used to separate the two callbacks from balloon.c and help
cope with 'balloon 0' on the monitor. Currently, 'balloon 0' causes a
segfault in monitor_resume().
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
|
|
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Almost pure code motion. Unstatic hid interface functions and add
them to the header file. Some renames. Some code style cleanups.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Add hid_has_events function, use it to figure whenever there are pending
events instead of checking and updating USBHIDState->changed.
Setting ->changed to 1 on init is removed, that should have absolutely
no effect as the initial state of ->idle is 0 so we report hid state
anyway until the guest configures some idle time. Also should clear
->idle on reset.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Add callback for event notification, which allows to un-usbify more
functions. Also split separate hid_* functions for reset and release.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
First step in separating out the HID emulation code from usb-hid, so it
can be reused without creating a dummy usb device like bluetooth does.
This creates a HIDState struct, moves the non-usbish fields from
USBHIDStruct there. Renames non-usbish structs, defines and functions
from usb* to hid*. Adapts the code to that.
Also cleans up a bunch of code style issues along the way.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Map guest memory and pass on a direct pointer instead of copying
the bits to a indirect buffer. EHCI transfer descriptors can
reference multiple (physical guest) pages so we'll actually start
seeing usb packets wich carry iovec with more than one element.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Map guest memory and pass on a direct pointer instead of copying
the bits to a indirect buffer.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Add full iovec support to usb-storage.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Add full support for iovecs to usb-serial.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Zap data pointer from USBPacket, add a QEMUIOVector instead.
Add a bunch of helper functions to manage USBPacket data.
Switch over users to the new interface.
Note that USBPacket->len was used for two purposes: First to
pass in the buffer size and second to return the number of
transfered bytes or the status code on async transfers. There
is a new result variable for the latter. A new status code
was added to catch uninitialized result.
Nobody creates iovecs with more than one element (yet).
Some users are (temporarely) limited to iovecs with a single
element to keep the patch size as small as possible.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
The QEMU keyboard and mouse reports themselves as full speed devices,
though they are actually low speed devices. Until this is fixed, claim that
we are supporting full speed devices.
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
|
|
The 'to' can go negative when the first region gets removed
(it gets incremented by to 0 immediately afterward), which
makes the assertion fail. Nothing breaks if
to < 0 here so just remove the assert.
Tested-by: David Ahern <daahern@cisco.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Inform guest drivers about the new features I/O commands we have
now (async commands, S3 support) if building with newer spice, i.e.
if SPICE_INTERFACE_QXL_MINOR >= 1.
sneaked in some 81+ column line spliting.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Alon Levy <alevy@redhat.com>
|
|
Add two new IOs.
QXL_IO_FLUSH_SURFACES - equivalent to update area for all surfaces, used
to reduce vmexits from NumSurfaces to 1 on guest S3, S4 and resolution change (windows
driver implementation is such that this is done on each of those occasions).
QXL_IO_FLUSH_RELEASE - used to ensure anything on last_release is put on the release ring
for the client to free.
Signed-off-by: Yonit Halperin <yhalperi@redhat.com>
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Some of the QXL port i/o commands are waiting for the spice server to
complete certain actions. Add async versions for these commands, so we
don't block the vcpu while the spice server processses the command.
Instead the qxl device will raise an IRQ when done.
The async command processing relies on an added QXLInterface::async_complete
and added QXLWorker::*_async additions, in spice server qxl >= 3.1
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Alon Levy <alevy@redhat.com>
|
|
Since the driver is still in operation even after moving to UNDEFINED, i.e.
by destroying primary in any way.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Add qxl_guest_bug() function which is supposed to be called in case
sanity checks of guest requests fail. It raises an error IRQ and
logs a message in case guest debugging is enabled.
Make PANIC_ON() abort instead of exit. That macro should be used
for qemu bugs only, any guest-triggerable stuff should use the new
qxl_guest_bug() function instead.
Convert a few easy cases from PANIC_ON() to qxl_guest_bug() to
show intended usage.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Surface tracking needs proper locking since it is used from vcpu and spice
worker threads, add it. Also reset the surface counter when zapping all
surfaces.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Move the wrapper functions which are used by qxl only to qxl.c.
Rename them from qemu_spice_* to qxl_spice_*. Also pass in a
qxl state pointer instead of a SimpleSpiceDisplay pointer.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Factor out SimpleSpiceDisplay initialization into
qemu_spice_display_init_common() and call it from
both qxl.c (for vga mode) and spice-display.c
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Add wrapper functions for all spice worker calls.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Instead of using its own definitions scsi-disk should
be using the device type of the parent device.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Sanitize SCSI command definitions.
Add _10 suffix to READ_CAPACITY, WRITE_VERIFY, VERIFY, READ_LONG,
WRITE_LONG, and WRITE_SAME.
Add new command definitions for LOCATE_10, UNMAP, VARLENGTH_CDB,
WRITE_FILEMARKS_16, EXTENDED_COPY, ATA_PASSTHROUGH, ACCESS_CONTROL_IN,
ACCESS_CONTROL_OUT, COMPARE_AND_WRITE, VERIFY_16, SYNCHRONIZE_CACHE_16,
LOCATE_16, ERASE_16, WRITE_LONG_16, LOAD_UNLOAD, VERIFY_12.
Remove invalid definition of WRITE_LONG_2.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
REZERO_UNIT command is obsolete. Remove support for it.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
SET_WINDOW command is vendor-specific only.
So we shouldn't try to emulate it.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Replace tabs with spaces.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Move softmmu_exec.h include directives from target-*/exec.h to
target-*/op_helper.c. Move also various other stuff only used in
op_helper.c there.
Define global env in dyngen-exec.h.
For i386, move wrappers for segment and FPU helpers from user-exec.c
to op_helper.c. Implement raise_exception_err_env() to handle dynamic
CPUState. Move the function declarations to cpu.h since they can be
used outside of op_helper.c context.
LM32, s390x, UniCore32: remove unused cpu_halted(), regs_to_env() and
env_to_regs().
ARM: make raise_exception() static.
Convert
#include "exec.h"
to
#include "cpu.h"
#include "dyngen-exec.h"
and remove now unused target-*/exec.h.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
This patch almost rewrites acpi_table_add() function
(but still leaves it using old get_param_value() interface).
The result is that it's now possible to specify whole table
(together with a header) in an external file, instead of just
data portion, with a new file= parameter, but at the same time
it's still possible to specify header fields as before.
Now with the checkpatch.pl formatting fixes, thanks to
Stefan Hajnoczi for suggestions, with changes from
Isaku Yamahata, and with my further refinements.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Cc: Isaku Yamahata <yamahata@valinux.co.jp>
Cc: John Baboval <john.baboval@virtualcomputer.com>
Cc: Blue Swirl <blauwirbel@gmail.com>
[yamahata@valinux.co.jp: fix compile error, comment fallthrough]
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
This leads to random off-by-one error.
When the size of the SD is exactly 1GB, the emulation was returning a
wrong SDHC CSD descriptor.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
|
|
For unknown reasons, Windows drivers (tested with XP and Win7) ignore
usb-tablet events that move the pointer to 0/0. So always report 0/0 as
1/0.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
|
|
Zipit Z2 is small PXA270 based handheld.
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
|
|
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
|
|
The program actions onenand_prog_main() and onenand_prog_spare()
can only set bits.
This implies a rewrite of onenand_erase() to not use the program
functions, since erase does need to set bits.
Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
[Riku Voipio: Fixes and restructuring patchset]
Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
[Peter Maydell: More fixes and cleanups for upstream submission]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
|
