aboutsummaryrefslogtreecommitdiff
path: root/hw
AgeCommit message (Collapse)Author
2010-02-27powerpc/booke: move fdt loading to rom infrastructureLiu Yu
It's convinent to use rom to checking overlap, to reset etc. And uImage and ramdisk loading has already moved to it. Also, after we add fdt to rom, free it. Signed-off-by: Liu Yu <yu.liu@freescale.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-02-27target-ppc: add synchronize register for booke initLiu Yu
So that the following registers init could be flushed back to kvm. Signed-off-by: Liu Yu <yu.liu@freescale.com> Acked-by: Hollis Blanchard <hollis@penguinppc.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-02-25Fix -usbdevice crashPaul Brook
If -usbdevice is used on a machine with no USB busses, usb_create will fail and return NULL. Patch below handles this failure gracefully rather than crashing when we try to init the device. Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-02-23rewrote timer implementation for rtl8139.Frediano Ziglio
Add a QEMU timer only when needed (timeout status not set, timeout irq wanted and timer set). This patch is required for Darwin. Patch has been tested under FreeBSD, Darwin and Linux. Signed-off-by: Frediano Ziglio <freddy77@gmail.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-22Fix lost serial TX interrupts. Report receive overruns.Justin T. Gibbs
o Implement receive overrun status. The FreeBSD uart driver relies on this status in it's probe routine to determine the size of the FIFO supported. o As per the 16550 spec, do not overwrite the RX FIFO on an RX overrun. o Do not allow TX or RX FIFO overruns to increment the data valid count beyond the size of the FIFO. o For reads of the IIR register, only clear the "TX holding register emtpy interrupt" if the read reports this interrupt. This is required by the specification and avoids losing TX interrupts when other, higher priority interrupts (usually RX) are reported first. Signed-off-by: Justin T. Gibbs <gibbs@FreeBSD.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-22apc_pci: simplify using rwhandlerMichael S. Tsirkin
Use rwhandler to simplify apb_pci. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-02-22apb_pci: minor cleanupMichael S. Tsirkin
pci_data_write ignores high 8 bit in address, so there seems to be no need to set them in apb_pci. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-02-22Fix arm-softmmu compileBlue Swirl
cc1: warnings being treated as errors /src/qemu/hw/pl181.c: In function 'pl181_fifo_run': /src/qemu/hw/pl181.c:185: error: 'value' may be used uninitialized in this function Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-02-22PL181 write fixPaul Brook
The PL181 data transfer loop incorrectly terminates after the last FIFO word is popped, discarding the last 3 bytes of data on a write transfer. Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-02-20Fix warning on mingw32Blue Swirl
/src/qemu/hw/ide/core.c: In function 'ide_drive_pre_save': /src/qemu/hw/ide/core.c:2740: warning: comparison is always false due to limited range of data type Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-02-19qdev: Free opts on failed do_device_addKevin Wolf
If the device can't be created, don't leak the QemuOpts and release the id of the device that should have been added by the failed device_add. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-19QEMU e820 reservation patchJes Sorensen
Hi, Kevin and I have agreed on the approach for this one now. So here is the latest version of the patch for QEMU, submitting e820 reservation entries via fw_cfg. Cheers, Jes Use qemu-cfg to provide the BIOS with an optional table of e820 entries. Notify the BIOS of the location of the TSS+EPT range to by reserving it via the e820 table. This matches a corresponding patch for Seabios, however older versions of Seabios will default to the hardcoded address range and stay compatible with current QEMU. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-19ide save/restore pio/atapi cmd transfer fields and io bufferMarcelo Tosatti
Save/restore information necessary to continue in progress PIO/ATAPI CMD transfers. This includes the IO buffer. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-19virtio-serial: pci: Allow MSI to be disabledAmit Shah
Michael noted we don't allow disabling of MSI for the virtio-serial-pci device. Fix that. Signed-off-by: Amit Shah <amit.shah@redhat.com> CC: "Michael S. Tsirkin" <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-19virtio-serial: don't set MULTIPORT for 1 port devMichael S. Tsirkin
Since commit 98b19252cf1bd97c54bc4613f3537c5ec0aae263, all serial devices declare MULTIPORT feature. To allow 0.12 compatibility, we should clear this when max_nr_ports is 1. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-19pc: Add backward compatibility options for virtio-serialAmit Shah
virtio-serial-pci can support multiple ports in the current development version that will become 0.13. Add compatibility options for the 0.12 and 0.11 pc machine types. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-19pc: Bump up pc version to 0.13 and add a 0.12 compat versionAmit Shah
The version 0.13 will be the new default and compatibility options will be added to the 0.12 version. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-19USB HID does not support Set_IdleKevin O'Connor
I found that the QEMU USB keyboard support does not work properly with the Set_Idle command. Once a non-zero value is given to Set_Idle, then the keyboard reports an event on every poll - not based on the time issued in the Set_Idle command. I changed the code (see patch below) and it works for me. I'm not that familiar with the qemu internals, so I'm not sure if this is the best way to implement this feature. -Kevin Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-19Monitor: Convert pci_device_hot_remove() to cmd_new_ret()Luiz Capitulino
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-19Monitor: Convert pci_device_hot_add() to cmd_new_ret()Luiz Capitulino
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-19Merge remote branch 'mst/for_anthony' into stagingAnthony Liguori
2010-02-15sparc32 fix spurious dma interrupts v2Artyom Tarasenko
Don't raise irq when not enabled. Raise irq on enabling if DMA_INTR is set Don't clear irq unless it was raised by DMA, as there are other irq sources Don't set DMA_INTR bit spuriously. v1->v2: - Don't clear irq unless it was raised by DMA - Raise irq on enabling if DMA_INTR is set - Assume revertion of 787cfbc432bf1d353a77cbdb613754f3963371a3 Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-02-15Revert "Sparc32: improve DMA controller IRQ debugging"Blue Swirl
This reverts commit 787cfbc432bf1d353a77cbdb613754f3963371a3.
2010-02-14versatile_pci: cleanupMichael S. Tsirkin
Cleanup versatile_pci: no need to re-set fields to zero (pci core sets 0 already), use set_word for status field. Compile-tested only, but seems obvious. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-14versatile_pci: convert to symbolic namesMichael S. Tsirkin
This converts versatile_pci to use symbolic constants. Verified by comparing binary to original one. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-14PPC: Add USB per default on U3Alexander Graf
Linux with CONFIG_PPC64 doesn't support ADB devices anymore, so we have to use USB for keyboard and mouse. This patch enables USB per default on U3 and adds a virtual keyboard and mouse there. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-02-14PPC: Get rid of segfaults in DBDMA emulationAlexander Graf
While trying to find the right channel number for the DBDMA emulation I stumbled across segmentation faults that were purely triggered by the guest. The guest should never have the possiblity to segfault us, so let's check all indirect function calls on a channel, so the code even works for channels that have not been reserved. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-02-14PPC: Use macio IDE controller for NewworldAlexander Graf
Per default Linux doesn't come with a lot of storage adapters enabled on Mac configurations. The one that's pretty much always present is the pmac-ide, while the cmd64x is almost never included in any distribution. So let's switch to use the MacIO based IDE controller. There is corresponding OpenBIOS code to get interrupts working properly. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-02-14PPC: tell the guest about the time base frequencyAlexander Graf
Our guest systems need to know by how much the timebase increases every second, so there usually is a "timebase-frequency" property in the cpu leaf of the device tree. This property is missing in OpenBIOS. With qemu, Linux's fallback timebase speed and qemu's internal timebase speed match up. With KVM, that is no longer true. The guest is running at the same timebase speed as the host. This leads to massive timing problems. On my test machine, a "sleep 2" takes about 14 seconds with KVM enabled. This patch exports the timebase frequency to OpenBIOS, so it can then put them into the device tree. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-02-14PPC: Make interrupts workAlexander Graf
The interrupt code as is didn't really work for me. I couldn't even convince Linux to take interrupt 9 in an interrupt-map. So let's do this right. Let's map all PCI interrupts to 0x1b - 0x1e. That way we're at least a small step closer to what real hardware does. I also took the interrupt pin to line conversion from OpenBIOS, which at least assures us we're compatible with our firmware :-). A dump of the PCI interrupt-map from a U2 (iBook): 00009000 00000000 00000000 00000000 ff97c528 00000034 00000001 0000d800 00000000 00000000 00000000 ff97c528 0000003f 00000001 0000c000 00000000 00000000 00000000 ff97c528 0000001b 00000001 0000c800 00000000 00000000 00000000 ff97c528 0000001c 00000001 0000d000 00000000 00000000 00000000 ff97c528 0000001d 00000001 Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-02-14PPC: Include dump of lspci -nn on real G5Alexander Graf
To ease debugging and to know what we're lacking, I found it really useful to have an lspci dump of a real U3 based G5 around. So I added a comment for it. If people don't think it's important enough to include this information in the sources, just don't apply this patch. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-02-14PPC: Use Mac99_U3 type on ppc64Alexander Graf
The "Mac99" type so far defines a "U2" based configuration. Unfortunately, there have never been any U2 based PPC64 machines. That's what the U3 was developed for. So let's split the Mac99 machine in a PPC64 and a PPC32 machine. The PPC32 machine stays "Mac99", while the PPC64 one becomes "Mac99_U3". All peripherals stay the same. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-02-14PPC: Uninorth config space accessorAlexander Graf
The Uninorth PCI bridge requires different layouts in its PCI config space accessors. This patch introduces a conversion function that makes it compatible with the way Linux accesses it. I also kept an OpenBIOS compatibility hack in. I think it'd be better to take small steps here and do the config space access rework in OpenBIOS later on. When that's done we can remove that hack. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-02-14pci_host: rewrite using rwhandlerMichael S. Tsirkin
Save a ton of code by switching pcihost to use rwhandler. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-02-14pci: move pcibus_t to qemu-commonMichael S. Tsirkin
move pcibus_t to qemu-common.h to simplify header dependencies. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-02-14dec: use PCI accessorsBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-02-14sparc64: use PCI accessors for APB/PBMBlue Swirl
Remove useless set to zero lines. Latency programming should be done by BIOS, reset value is zero. Add revision to APB, don't enable PCI_COMMAND_MASTER and set status according to APB specification. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-02-14Remove conditional rom loading supportBlue Swirl
Commit c2039bd0ffce8807e0eaac55254fde790825fa92 made rom loading automatic for non-PC architectures. Remove now mostly unused conditional rom loading support. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-02-13pci: fix info pci with host bridge.Isaku Yamahata
This patch fixes 525e05147d5a3bdc08caa422d108c1ef71b584b5. pci host bridge doesn't have header type of bridge. The check should be by header type, instead of pci class device. Cc: Blue Swirl <blauwirbel@gmail.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-02-13Merge branch 'for_anthony' of ↵Blue Swirl
git://git.kernel.org/pub/scm/linux/kernel/git/mst/qemu * 'for_anthony' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/qemu: pci: fix pci_find_bus()
2010-02-10ide: add topology supportChristoph Hellwig
Export the physical block size in the ATA IDENTIFY command. The other topology values are not supported in ATA so skip them. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-10scsi: add topology supportChristoph Hellwig
Export the physical block size in the READ CAPACITY (16) command, and add the new block limits VPD page to export the minimum and optiomal I/O sizes. Note that we also need to bump the scsi revision level to SPC-2 as that is the minimum requirement by at least the Linux kernel to try READ CAPACITY (16) first and look at the block limits VPD page. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-10virtio-blk: add topology supportChristoph Hellwig
Export all topology information in the block config structure, guarded by a new VIRTIO_BLK_F_TOPOLOGY feature flag. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-10block: add topology qdev propertiesChristoph Hellwig
Add three new qdev properties to export block topology information to the guest. This is needed to get optimal I/O alignment for RAID arrays or SSDs. The options are: - physical_block_size to specify the physical block size of the device, this is going to increase from 512 bytes to 4096 kilobytes for many modern storage devices - min_io_size to specify the minimal I/O size without performance impact, this is typically set to the RAID chunk size for arrays. - opt_io_size to specify the optimal sustained I/O size, this is typically the RAID stripe width for arrays. I decided to not auto-probe these values from blkid which might easily be possible as I don't know how to deal with these issues on migration. Note that we specificly only set the physical_block_size, and not the logial one which is the unit all I/O is described in. The reason for that is that IDE does not support increasing the logical block size and at last for now I want to stick to one meachnisms in queue and allow for easy switching of transports for a given backing image which would not be possible if scsi and virtio use real 4k sectors, while ide only uses the physical block exponent. To make this more common for the different block drivers introduce a new BlockConf structure holding all common block properties and a DEFINE_BLOCK_PROPERTIES macro to add them all together, mirroring what is done for network drivers. Also switch over all block drivers to use it, except for the floppy driver which has weird driveA/driveB properties and probably won't require any advanced block options ever. Example usage for a virtio device with 4k physical block size and 8k optimal I/O size: -drive file=scratch.img,media=disk,cache=none,id=scratch \ -device virtio-blk-pci,drive=scratch,physical_block_size=4096,opt_io_size=8192 aliguori: updated patch to take into account BLOCK events Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-10virtio-blk: revert serial number supporthch@lst.de
The addition of the whole ATA IDENTIY page caused the config space to go above the allowed size in the PCI spec, and thus the feature was already reverted in the Linux guest driver and disabled by default in qemu. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-10Monitor: remove unneeded checksLuiz Capitulino
It's not needed to check the return of qobject_from_jsonf() anymore, as an assert() has been added there. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-10virtio-net: fix network stall under loadTom Lendacky
Fix a race condition where qemu finds that there are not enough virtio ring buffers available and the guest make more buffers available before qemu can enable notifications. Signed-off-by: Tom Lendacky <toml@us.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-10segfault due to buffer overrun in usb-serialDavid S. Ahern
This fixes a segfault due to buffer overrun in the usb-serial device. The memcpy was incrementing the start location by recv_used yet, the computation of first_size (how much to write at the end of the buffer before wrapping to the front) was not accounting for it. This causes the next element after the receive buffer (recv_ptr) to get overwritten with random data. Signed-off-by: David Ahern <daahern@cisco.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-10audio streaming from usb devicesDavid S. Ahern
I have streaming audio devices working within qemu-kvm. This is a port of the changes to qemu. Streaming audio generates a series of isochronous requests that are repetitive and time sensitive. The URBs need to be submitted in consecutive USB frames and responses need to be handled in a timely manner. Summary of the changes for isochronous requests: 1. The initial 'valid' value is increased to 32. It needs to be higher than its current value of 10 since the host adds a 10 frame delay to the scheduling of the first request; if valid is set to 10 the first isochronous request times out and qemu cancels it. 32 was chosen as a nice round number, and it is used in the path where a TD-async pairing already exists. 2. The token field in the TD is *not* unique for isochronous requests, so it is not a good choice for finding a matching async request. The buffer (where to write the guest data) is unique, so use that value instead. 3. TD's for isochronous request need to be completed in the async completion handler so that data is pushed to the guest as soon as it is available. The uhci code currently attempts to process complete isochronous TDs the next time the UHCI frame with the request is processed. The results in lost data since the async requests will have long since timed out based on the valid parameter. Increasing the valid value is not acceptable as it introduces a 1+ second delay in the data getting pushed to the guest. 4. The frame timer needs to be run on 1 msec intervals. Currently, the expire time for the processing the next frame is computed after the processing of each frame. This regularly causes the scheduling of frames to shift in time. When this happens the periodic scheduling of the requests is broken and the subsequent request is seen as a new request by the host resulting in a 10 msec delay (first isochronous request is scheduled for 10 frames from when the URB is submitted). [ For what's worth a small change is needed to the guest driver to have more outstanding URBs (at least 4 URBs with 5 packets per URB).] Signed-off-by: David Ahern <daahern@cisco.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-10virtio-blk: Generate BLOCK_IO_ERROR QMP eventLuiz Capitulino
Just call bdrv_mon_event() in the right place. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-20 01:05:04 +0000