aboutsummaryrefslogtreecommitdiff
path: root/hw
AgeCommit message (Collapse)Author
2014-03-05target-ppc: add PowerPCCPU::cpu_dt_idAlexey Kardashevskiy
Normally CPUState::cpu_index is used to pick the right CPU for various operations. However default consecutive numbering does not always work for POWERPC. These indexes are reflected in /proc/device-tree/cpus/PowerPC,POWER7@XX and used to call KVM VCPU's ioctls. In order to achieve this, kvmppc_fixup_cpu() was introduced. Roughly speaking, it multiplies cpu_index by the number of threads per core. This approach has disadvantages such as: 1. NUMA configuration stays broken after the fixup; 2. CPU-targeted commands from the QEMU Monitor do not work properly as CPU indexes have been fixed and there is no clear way for the user to know what the new CPU indexes are. This introduces a @cpu_dt_id field in the CPUPPCState struct which is initialized from @cpu_index by default and can be fixed later to meet the device tree requirements. This adds an API to handle @cpu_dt_id. This removes kvmppc_fixup_cpu() as it is not more needed, @cpu_dt_id is calculated in ppc_cpu_realize(). This will be used later in machine code. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by: Mike Day <ncmike@ncultra.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05target-ppc: Introduce hypervisor call H_GET_TCELaurent Dufour
This patch introduces the hypervisor call H_GET_TCE which is basically the reverse of H_PUT_TCE, as defined in the Power Architecture Platform Requirements (PAPR). The hcall H_GET_TCE is required by the kdump kernel which is calling it to retrieve the TCE set up by the panicing kernel. Signed-off-by: Laurent Dufour <ldufour@linux.vnet.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05target-ppc: Change the hpte store APIAneesh Kumar K.V
For updating in kernel htab we need to provide both pte0 and pte1, hence update the interface to take pte0 and pte1 together Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> [ ldq_phys() API change, Greg Kurz <gkurz@linux.vnet.ibm.com> ] Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05target-ppc: Fix page table lookup with kvm enabledAneesh Kumar K.V
With kvm enabled, we store the hash page table information in the hypervisor. Use ioctl to read the htab contents. Without this we get the below error when trying to read the guest address (gdb) x/10 do_fork 0xc000000000098660 <do_fork>: Cannot access memory at address 0xc000000000098660 (gdb) Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> [ fixes for 32 bit build (casts!), ldq_phys() API change, Greg Kurz <gkurz@linux.vnet.ibm.com ] Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05target-ppc: Fix htab_mask calculationAneesh Kumar K.V
Correctly update the htab_mask using the return value of KVM_PPC_ALLOCATE_HTAB ioctl. Also we don't update sdr1 on GET_SREGS for HV. We check for external htab and if found true, we don't need to update sdr1 Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> [ fixed pte group offset computation in ppc_hash64_htab_lookup() that caused TCG to fail, Greg Kurz <gkurz@linux.vnet.ibm.com> ] Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05PPC: sPAPR: Only use getpagesize() when we run with kvmAlexander Graf
We currently size the msi window trap page according to the host's page size so that we poke a working hole into a memory slot in case we overlap. However, this is only ever necessary with KVM active. Without KVM, we should rather try to be host platform agnostic and use a constant size: 4k. This fixes a build breakage on win32 hosts. Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05spapr-vlan: flush queue whenever can_receive can go from false to trueAlexey Kardashevskiy
When the guests adds buffers to receive queue, the network device should flush its queue of pending packets. This is done with qemu_flush_queued_packets. This adds a call to qemu_flush_queued_packets() which wakes up the main loop and let QEMU update the network device status which now is "can receive". The patch basically does the same thing as e8b4c68 does. Suggested-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05qdev: Keep global allocation counter per busAlexander Graf
When we have 2 separate qdev devices that both create a qbus of the same type without specifying a bus name or device name, we end up with two buses of the same name, such as ide.0 on the Mac machines: dev: macio-ide, id "" bus: ide.0 type IDE dev: macio-ide, id "" bus: ide.0 type IDE If we now spawn a device that connects to a ide.0 the last created bus gets the device, with the first created bus inaccessible to the command line. After some discussion on IRC we concluded that the best quick fix way forward for this is to make automated bus-class type based allocation count a global counter. That's what this patch implements. With this we instead get dev: macio-ide, id "" bus: ide.1 type IDE dev: macio-ide, id "" bus: ide.0 type IDE on the example mentioned above. This also means that if you did -device ...,bus=ide.0 you got a device on the first bus (the last created one) before this patch and get that device on the second one (the first created one) now. Breaks migration unless you change bus=ide.0 to bus=ide.1 on the destination. This is intended and makes the bus enumeration work as expected. As per review request follows a list of otherwise affected boards and the reasoning for the conclusion that they are ok: target machine bus id times ------ ------- ------ ----- aarch64 n800 i2c-bus.0 2 aarch64 n810 i2c-bus.0 2 arm n800 i2c-bus.0 2 arm n810 i2c-bus.0 2 -> Devices are only created explicitly on one of the two buses, using s->mpu->i2c[0], so no change to the guest. aarch64 vexpress-a15 virtio-mmio-bus.0 4 aarch64 vexpress-a9 virtio-mmio-bus.0 4 aarch64 virt virtio-mmio-bus.0 32 arm vexpress-a15 virtio-mmio-bus.0 4 arm vexpress-a9 virtio-mmio-bus.0 4 arm virt virtio-mmio-bus.0 32 -> Makes -device bus= work for all virtio-mmio buses. Breaks migration. Workaround for migration from old to new: specify virtio-mmio-bus.4 or .32 respectively rather than .0 on the destination. aarch64 xilinx-zynq-a9 usb-bus.0 2 arm xilinx-zynq-a9 usb-bus.0 2 mips64el fulong2e usb-bus.0 2 -> Normal USB operation not affected. Migration driver needs command line to use the other bus. i386 isapc ide.0 2 x86_64 isapc ide.0 2 mips mips ide.0 2 mips64 mips ide.0 2 mips64el mips ide.0 2 mipsel mips ide.0 2 ppc g3beige ide.0 2 ppc mac99 ide.0 2 ppc prep ide.0 2 ppc64 g3beige ide.0 2 ppc64 mac99 ide.0 2 ppc64 prep ide.0 2 -> Makes -device bus= work for all IDE buses. Breaks migration. Workaround for migration from old to new: specify ide.1 rather than ide.0 on the destination. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Andreas Faerber <afaerber@suse.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05target-ppc: Update external_htab even when HTAB is managed by kernelAneesh Kumar K.V
We will use this in later patches to make sure we use the right load functions when copying hpte entries. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05spapr: print more detailed error message on failed load_elf()Alexey Kardashevskiy
This makes use of new error codes which load_elf() can return and prints more informative error message. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05elf-loader: add more return codesAlexey Kardashevskiy
The existing load_elf() just returns -1 if it fails to load ELF. However it could be smarter than this and tell more about the failure such as wrong endianness or incompatible platform. This adds additional return codes for wrong architecture, wrong endianness and if the image is not ELF at all. This adds a load_elf_strerror() helper to convert return codes into string messages. This fixes handling of what load_elf() returns for s390x, other callers just check the return value for <0 and this remains unchanged. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05moxie: fix load_elf() usageAlexey Kardashevskiy
At the moment in the case of error, load_elf() returns -1 so load_kernel() will not signal error at all. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05spapr: support only ELF kernel imagesAlexey Kardashevskiy
Currently everybody uses ELF kernel images with "-kernel" option on pseries machine but QEMU still tries to boot from an image even it fails to recognize it is ELF. This produces undefined behaviour if the user tries a kernel image compiled for another architecture. This removes support of raw kernel images. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05Add Enhanced Three-Speed Ethernet Controller (eTSEC)Fabien Chouteau
This implementation doesn't include ring priority, TCP/IP Off-Load, QoS. Signed-off-by: Fabien Chouteau <chouteau@adacore.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05virtex_ml507: Add support for loading initrd imagesEdgar E. Iglesias
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> [agraf: fix up stray quotes and newlines in strings] Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05spapr_vscsi: Fix REPORT_LUNS handlingNathan Whitehorn
Intercept REPORT_LUNS commands addressed either to SRP LUN 0 or the well-known LUN for REPORT_LUNS commands. This is required to implement the SAM and SPC specifications. Since SRP implements only a single SCSI target port per connection, the SRP target is required to report all available LUNs in response to a REPORT_LUNS command addressed either to LUN 0 or the well-known LUN. Instead, QEMU was forwarding such requests to the first QEMU SCSI target, with the result that initiators that relied on this feature would only see LUNs on the first QEMU SCSI target. Behavior for REPORT_LUNS commands addressed to any other LUN is not specified by the standard and so is left unchanged. This preserves behavior under Linux and SLOF, which enumerate possible LUNs by hand and so address no commands either to LUN 0 or the well-known REPORT_LUNS LUN. Signed-off-by: Nathan Whitehorn <nwhitehorn@freebsd.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com> [agraf: define constant as ULL for 32bit hosts] Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05spapr-pci: enable adding PHB via -deviceAlexey Kardashevskiy
Recent changes introduced cannot_instantiate_with_device_add_yet and removed capability of adding yet another PCI host bridge via command line for SPAPR platform (POWERPC64 server). This brings the capability back and puts SPAPR PHB into "bridge" category. This is not much use for emulated PHB but it is absolutely required for VFIO as we put an IOMMU group onto a separate PHB on SPAPR. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-05kvm: Add a new machine option kvm-typeAneesh Kumar K.V
Targets like ppc64 support different types of KVM, one which use hypervisor mode and the other which doesn't. Add a new machine option kvm-type that helps in selecting the respective ones We also add a new QEMUMachine callback get_vm_type that helps in mapping the string representation of kvm type specified. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> [agraf: spelling fixes, use error_report(), use qemumachine.h] Signed-off-by: Alexander Graf <agraf@suse.de>
2014-03-04Merge remote-tracking branch 'remotes/borntraeger/tags/kvm-s390-20140227' ↵Peter Maydell
into staging Several features, fixes and cleanups for kvm/s390: - sclp event facility: cleanup structure. This allows to use realize/unrealize as well as migration support via vmsd - reboot: Two fixes that make reboot much more reliable - ipl: make elf loading more robust - flic interrupt controller: This allows to migrate floating interrupts, as well as clear them on reset etc. - enable async_pf feature of KVM on s390 - several sclp fixes and cleanups - several sigp fixes and cleanups * remotes/borntraeger/tags/kvm-s390-20140227: (22 commits) s390x/ipl: Fix crash of ELF images with arbitrary entry points s390x/kvm: Rework priv instruction handlers s390x/kvm: Add missing SIGP CPU RESET order s390x/kvm: Rework SIGP INITIAL CPU RESET handler s390x/cpu: Use ioctl to reset state in the kernel s390-ccw.img: new binary rom to match latest fixes s390-ccw.img: Fix sporadic errors with ccw boot image - initialize css s390-ccw.img: Fix sporadic reboot hangs: Initialize next_idx s390x/event-facility: exploit realize/unrealize s390x/event-facility: add support for live migration s390x/event-facility: code restructure s390x/event-facility: some renaming s390x/sclp: Fixed setting of condition code register s390x/sclp: Add missing checks to SCLP handler s390x/sclp: Fixed the size of sccb and code parameter s390x/eventfacility: mask out commands s390x/virtio-hcall: Specification exception for illegal subcodes s390x/virtio-hcall: Add range check for hypervisor call s390x/kvm: Fixed bad SIGP SET-ARCHITECTURE handler s390x/async_pf: Check for apf extension and enable pfault ... Conflicts: linux-headers/linux/kvm.h Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-03-04Merge remote-tracking branch 'remotes/bonzini/scsi-next' into stagingPeter Maydell
* remotes/bonzini/scsi-next: block/iscsi: fix segfault if writesame fails scsi-disk: Add support for port WWN and index descriptors in VPD page 83h block/iscsi: query for supported VPD pages block/iscsi: fix deadlock on scsi check condition scsi-bus: Fix transfer length for VERIFY with BYTCHK=11b scsi: report thin provisioning errors with werror=report scsi: Change scsi sense buf size to 252 Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-03-04Merge remote-tracking branch 'remotes/mcayland/qemu-sparc' into stagingPeter Maydell
* remotes/mcayland/qemu-sparc: sun4m: Add Sun CG3 framebuffer initialisation function sun4m: Add Sun CG3 framebuffer and corresponding OpenBIOS FCode ROM sun4m: fix slavio timer RUN/STOP bit sun4m: Set HostID in NVRAM Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-27Merge remote-tracking branch ↵Peter Maydell
'remotes/awilliam/tags/vfio-pci-for-qemu-20140226.0' into staging Updates include: - Coverify fixes for vfio & pci-assign (Markus) - VFIO blacklisting support for known brokwn PCI option ROMs (Bandan) # gpg: Signature made Wed 26 Feb 2014 18:15:28 GMT using RSA key ID 3BB08B22 # gpg: Can't check signature: public key not found * remotes/awilliam/tags/vfio-pci-for-qemu-20140226.0: vfio: blacklist loading of unstable roms qdev-monitor: set DeviceState opts before calling realize pci-assign: Fix potential read beyond buffer on -EBUSY vfio: Fix overrun after readlink() fills buffer completely Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-27sun4m: Add Sun CG3 framebuffer initialisation functionMark Cave-Ayland
In order to allow the user to choose the framebuffer for sparc-softmmu, add -vga tcx and -vga cg3 options to the QEMU command line. If no option is specified, the default TCX framebuffer is used. Since proprietary FCode ROMs use a resolution of 1152x900, slightly relax the validation rules to allow both displays to be initiated at the higher resolution used by these ROMs upon request (OpenBIOS FCode ROMs default to the normal QEMU sun4m default resolution of 1024x768). Finally move any fprintf(stderr ...) statements in the areas affected by this patch over to the new error_report() function. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> CC: Blue Swirl <blauwirbel@gmail.com> CC: Anthony Liguori <aliguori@amazon.com> CC: Peter Maydell <peter.maydell@linaro.org> CC: Bob Breuer <breuerr@mc.net> CC: Artyom Tarasenko <atar4qemu@gmail.com>
2014-02-27sun4m: Add Sun CG3 framebuffer and corresponding OpenBIOS FCode ROMMark Cave-Ayland
The CG3 framebuffer is a simple 8-bit framebuffer for use with operating systems such as early Solaris that do not have drivers for TCX. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> CC: Blue Swirl <blauwirbel@gmail.com> CC: Anthony Liguori <aliguori@amazon.com> CC: Peter Maydell <peter.maydell@linaro.org> CC: Bob Breuer <breuerr@mc.net> CC: Artyom Tarasenko <atar4qemu@gmail.com>
2014-02-27sun4m: fix slavio timer RUN/STOP bitMark Cave-Ayland
The sun4m architecture has one 'system' timer and one timer per CPU. The CPU timers can be configured in two modes: * 22 bits Counter/Timer. Periodic interrupts. * 54 bits User timer. For profiling. In this mode, the Run/Stop bit controls the timer. The run/stop bit controls the timer only when it is in "User" mode, but its state shall be persistent. Signed-off-by: Olivier Danet <odanet@caramail.com> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2014-02-27s390x/ipl: Fix crash of ELF images with arbitrary entry pointsThomas Huth
When loading S390 kernels, the current code expects an ELF file with the start address 0x10000. Other ELF files cause a segmentation fault. To avoid these crashes, we should get the start address from the ELF file instead of always using a hard-coded address. Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-02-27s390x/event-facility: exploit realize/unrealizeHeinz Graalfs
init/exit functionality of abstract SCLPEvent class is now exploiting realize/unrealize. Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-02-27s390x/event-facility: add support for live migrationHeinz Graalfs
Add support for live migration using VMStateDescription. Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-02-27s390x/event-facility: code restructureHeinz Graalfs
Code restructure in order to simplify class hierarchy - remove S390SCLPDevice abstract base class and move function pointers into new SCLPEventFacilityClass - implement SCLPEventFacility as SysBusDevice - use define constants for instance creation strings The following ascii-art shows the class structure wrt the SCLP EventFacility before (CURRENT) and after the restructure (NEW): ---- CURRENT: "s390-sclp-events-bus" +-------------------------+ | SCLPEventsBus | |-------------------------| |BusState qbus | +-------------------------+ +-------------------------+ | SCLPEventFacility | - to be replaced by new SCLPEventFacility, |-------------------------| which will be a SysBusDevice |SCLPEventsBus sbus | |DeviceState *qdev | |unsigned int receive_mask| +-------------------------+ +-------------------------+ | S390SCLPDeviceClass | - to be replaced by new SCLPEventFacilityClass |-------------------------| |DeviceClass qdev | |*(init)() | +-------------------------+ "s390-sclp-event-facility" | instance-of | V "s390-sclp-device" - this is an abstract class +-------------------------+ | S390SCLPDevice (A)| - to be replaced by new SCLPEventFacility |-------------------------| |SysBusDevice busdev | |SCLPEventFacility *ef | | | |*(sclp_command_handler)()| - these 2 go to new SCLPEventFacilityClass |*(event_pending)() | +-------------------------+ ---- NEW: "s390-sclp-events-bus" +-------------------------+ | SCLPEventsBus | |-------------------------| |BusState qbus | +-------------------------+ +-------------------------+ | SCLPEventFacilityClass | |-------------------------| |DeviceClass parent_class | | | |*(init)() | |*(command_handler)() | |*(event_pending)() | +-------------------------+ "s390-sclp-event-facility" +-------------------------+ | SCLPEventFacility | |-------------------------| |SysBusDevice parent_class| |SCLPEventsBus sbus | |unsigned int receive_mask| +-------------------------+ Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-02-27s390x/event-facility: some renamingHeinz Graalfs
Do some renaming to shorten some identifiers and to emphasize sclp. Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-02-27s390x/sclp: Add missing checks to SCLP handlerThomas Huth
If the 51 most significant bits of the SCCB address are zero or equal to the prefix, we should throw an specification exception, too. Also moved the check for privileged mode to sclp_service_call() to have all program checks in one place now. Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-02-27s390x/sclp: Fixed the size of sccb and code parameterThomas Huth
The pointer to the SCCB should not be limited to 32 bits only. In contrast to this, the command word parameter is only 32 bits (the upper 32 bits should be ignored). Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-02-27s390x/eventfacility: mask out commandsChristian Borntraeger
As a followup to commit 5f04c14a10fa7f259bc0808f35a0beda49f7821e (s390-sclp: Define New SCLP Codes) we should mask the sclp command not only in base sclp, but also in the event facility. Based on an initial patch from Ralf Hoppe. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-02-27s390x/virtio-hcall: Specification exception for illegal subcodesThomas Huth
So far, the DIAG 500 hypervisor call was only setting -EINVAL in R2 when a guest tried to call this function with an illegal subcode. This patch now changes the behavior so that a specification exception is thrown instead, since this is the common behavior of other DIAG functions (and other CPU instructions) when being called with illegal parameters. Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-02-27s390x/virtio-hcall: Add range check for hypervisor callThomas Huth
The handler for diag 500 did not check whether the requested function was in the supported range, so illegal values could crash QEMU in the worst case. Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> CC: qemu-stable@nongnu.org
2014-02-27s390x/async_pf: Check for apf extension and enable pfaultDominik Dingel
S390 can also use async page faults, to enhance guest scheduling. In case of live migration we want to disable the feature and let all pending request finish. Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-02-27s390x/kvm: implement floating-interrupt controller deviceJens Freimann
This patch implements a floating-interrupt controller device (flic) which interacts with the s390 flic kvm_device. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-02-26Merge remote-tracking branch ↵Peter Maydell
'remotes/pmaydell/tags/pull-target-arm-20140226' into staging target-arm queue: * fixes for various Coverity-spotted bugs * support new KVM device control API for VGIC * support KVM VGIC save/restore/migration * more AArch64 system mode foundations * support ARMv8 CRC instructions for A32/T32 * PL330 minor fixes and cleanup # gpg: Signature made Wed 26 Feb 2014 17:51:32 GMT using RSA key ID 14360CDE # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" * remotes/pmaydell/tags/pull-target-arm-20140226: (45 commits) dma/pl330: implement dmaadnh instruction dma/pl330: Fix buffer depth dma/pl330: Add event debugging printfs dma/pl330: Rename parent_obj dma/pl330: printf format type sweep. dma/pl330: Fix misleading type dma/pl330: Delete overly verbose debug printf target-arm: Add support for AArch32 ARMv8 CRC32 instructions include/qemu/crc32c.h: Rename include guards to match filename target-arm: Add utility function for checking AA32/64 state of an EL target-arm: Implement AArch64 view of CPACR target-arm: A64: Implement MSR (immediate) instructions target-arm: Store AIF bits in env->pstate for AArch32 target-arm: A64: Implement WFI target-arm: Get MMU index information correct for A64 code target-arm: Implement AArch64 OSLAR_EL1 sysreg as WI target-arm: Implement AArch64 dummy breakpoint and watchpoint registers target-arm: Implement AArch64 ID and feature registers target-arm: Implement AArch64 generic timers target-arm: Implement AArch64 MPIDR ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-26Merge remote-tracking branch 'remotes/stefanha/tags/net-pull-request' into ↵Peter Maydell
staging Net patches # gpg: Signature made Tue 25 Feb 2014 13:32:33 GMT using RSA key ID 81AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8 * remotes/stefanha/tags/net-pull-request: virtio-net: use qemu_get_queue() where possible vhost_net: use offload API instead of bypassing it net: remove implicit peer from offload API net: Disable netmap backend when not supported net: add offloading support to netmap backend net: make tap offloading callbacks static net: virtio-net and vmxnet3 use offloading API net: TAP uses NetClientInfo offloading callbacks net: extend NetClientInfo for offloading net: change vnet-hdr TAP prototypes opencores_eth: flush queue whenever can_receive can go from false to true Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-26Merge remote-tracking branch 'remotes/kraxel/tags/pull-audio-3' into stagingPeter Maydell
hda-audio: qom cleanups # gpg: Signature made Mon 24 Feb 2014 12:19:48 GMT using RSA key ID D3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" * remotes/kraxel/tags/pull-audio-3: hda-audio: qom cleanups Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-26vfio: blacklist loading of unstable romsBandan Das
Certain cards such as the Broadcom BCM57810 have rom quirks that exhibit unstable system behavior duing device assignment. In the particular case of 57810, rom execution hangs and if a FLR follows, the device becomes inoperable until a power cycle. This change blacklists loading of rom for such cards unless the user specifies a romfile or rombar=1 on the cmd line Signed-off-by: Bandan Das <bsd@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2014-02-26pci-assign: Fix potential read beyond buffer on -EBUSYMarkus Armbruster
readlink() doesn't write a terminating null byte. assign_failed_examine() passes the unterminated string to strrchr(). Oops. Terminate it. Spotted by Coverity. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2014-02-26vfio: Fix overrun after readlink() fills buffer completelyMarkus Armbruster
readlink() returns the number of bytes written to the buffer, and it doesn't write a terminating null byte. vfio_init() writes it itself. Overruns the buffer when readlink() filled it completely. Fix by treating readlink() filling the buffer completely as error, like we do in pci-assign.c's assign_failed_examine(). Spotted by Coverity. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2014-02-26dma/pl330: implement dmaadnh instructionPeter Crosthwaite
Implement the missing DMAADNH instruction. This is a minor variant of the DMAADDH instruction, so factor out to a common implementation for both (dmaadxh). Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 73ab13532a7cae53441da89b46c279b5f50785e3.1393372019.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-26dma/pl330: Fix buffer depthPeter Crosthwaite
This is the product of the data-width and the depth arguments, I.e the depth of the FIFO is in terms of data entries and not bytes (which is what the original implementation was suggesting). Fix. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: c34de31031511538ccdb3164b48ee8a6a973ebd4.1393372019.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-26dma/pl330: Add event debugging printfsPeter Crosthwaite
These are helpful to anyone trying to debug event sequencing. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: e82a0ad804db3de4f46839e55a9d287735ef870d.1393372019.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-26dma/pl330: Rename parent_objPeter Crosthwaite
As per current QOM conventions. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: abb137347ea1ee9c31487b544f3d5435fb17f6a4.1393372019.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-26dma/pl330: printf format type sweep.Peter Crosthwaite
Use PRI formats as appropriate rather than raw %x and %d. This fixes debug printfery on some host platforms. Fix types of debug only variables as appropriate. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: dbb5f5fd048b2d4a3cb5c6357577d11211a7a585.1393372019.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-26dma/pl330: Fix misleading typePeter Crosthwaite
This type really should just be a regular int as no usages rely on it's 32 bitness (it's only meaningful as a bit position and not a bit mask). This also fixes a printf which uses the variable with a regular %d. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 2a99d31f377aee371476d9da8fd0d1b7efa30f63.1393372019.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-26dma/pl330: Delete overly verbose debug printfPeter Crosthwaite
When using event synchronisation, this particular debug printf floods. Just delete it. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: dd94d19493f97c47497b9d8caf74ca43e70d58fd.1393372019.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-12 21:38:55 +0000