Age | Commit message (Collapse) | Author |
|
While reading information via 'megasas_ctrl_get_info' routine,
a local bios version buffer isn't null terminated. Add the
terminating null byte to avoid any OOB access.
Reported-by: Li Qiang <liqiang6-s@360.cn>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The 53C9X Fast SCSI Controller(FSC) comes with internal 16-byte
FIFO buffers. One is used to handle commands and other is for
information transfer. Three control variables 'ti_rptr',
'ti_wptr' and 'ti_size' are used to control r/w access to the
information transfer buffer ti_buf[TI_BUFSZ=16]. In that,
'ti_rptr' is used as read index, where read occurs.
'ti_wptr' is a write index, where write would occur.
'ti_size' indicates total bytes to be read from the buffer.
While reading/writing to this buffer, index could exceed its
size. Add check to avoid OOB r/w access.
Reported-by: Huawei PSIRT <psirt@huawei.com>
Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-Id: <1465230883-22303-1-git-send-email-ppandit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The previous commit e7c9136977cb99c6eb52c9139f7b8d8b5fa87db9
(hw/char: QOM'ify escc.c) cause qemu-system-ppc/ppc64
OpenBIOS to freeze on startup, this commit fix it.
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <1464767898-30526-1-git-send-email-zxq_yx_007@163.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This patch extends the functionality of the max-ram-below-4g option
to also allow increasing lowmem. Use case: Give as much memory as
possible to legacy non-PAE guests.
While being at it also rework the lowmem calculation logic and add a
longish comment describing how it works and what the compatibility
constrains are.
Note: This is a incompatible change. When setting max-ram-below-4g to
a value larger than 3.5G (or 3G with gigabyte alignment) it has no
effect on older qemu versions: qemu silently ignores it. With the patch
applied it actually has an effect and changes the ram layout. Highly
unlikely to hit in practive though as there is no reason start old qemu
versions that way.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1464857305-26675-1-git-send-email-kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Most Zynq UltraScale+ users will be targetting and using the ZCU102
board instead of the development focused EP108. To make our QEMU machine
names clearer add a ZCU102 machine model.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: cc82eec026b2febfca252d73362bb7084616c1ad.1464213234.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
* drop qemu_char_get_next_serial and use chardev prop
* create xilinx_uartlite_create wrapper function to create
xilinx_uartlite device
* change affected board code to use the new way
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465028065-5855-6-git-send-email-zxq_yx_007@163.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
* drop qemu_char_get_next_serial and use chardev prop
* change affected board code to use the new way
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465028065-5855-5-git-send-email-zxq_yx_007@163.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
* drop qemu_char_get_next_serial and use chardev prop
* change affected board code to use the new way
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465028065-5855-4-git-send-email-zxq_yx_007@163.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
* drop qemu_char_get_next_serial and use chardev prop
* create cadence_uart_create wrapper function to create
cadence_uart_device
* change affected board code to use the new way
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465028065-5855-3-git-send-email-zxq_yx_007@163.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
* drop qemu_char_get_next_serial and use chardev prop
* add pl011_create wrapper function to create pl011 uart device
* change affected board code to use the new way
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1465028065-5855-2-git-send-email-zxq_yx_007@163.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Currently ptimer users are used to store copy of the limit value, because
ptimer doesn't provide facility to retrieve the limit. Let's provide it.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 8f1fa9f90d8dbf8086fb02f3b4835eaeb4089cf6.1464367869.git.digetx@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Allow switching between periodic <-> oneshot modes while timer is running.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: f030be6e28fbd219e1e8d22297aee367bd9af5bb.1464367869.git.digetx@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Delta value must be updated on period/freq change, otherwise running timer
would be restarted (counter reloaded with old delta). Only m68k/mcf520x
and arm/arm_timer devices are currently doing freq change correctly, i.e.
stopping the timer. Perform delta update to fix affected devices and
eliminate potential further mistakes.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 4987ef5fdc128bb9a744fd794d3f609135c6a39c.1464367869.git.digetx@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
ptimer_get_count() might be called while QEMU timer already been expired.
In that case ptimer would return counter = 0, which might be undesirable
in case of polled timer. Do counter wrap around for periodic timer to keep
it distributed. In order to achieve more accurate emulation behaviour of
certain hardware, don't perform wrap around when in icount mode and return
counter = 0 in that case (that doesn't affect polled counter distribution).
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 4ce381c7d24d85d165ff251d2875d16a4b6a5c04.1464367869.git.digetx@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Multiple issues here related to the timer with a adjusted .limit value:
1) ptimer_get_count() returns incorrect counter value for the disabled
timer after loading the counter with a small value, because adjusted limit
value is used instead of the original.
For instance:
1) ptimer_stop(t)
2) ptimer_set_period(t, 1)
3) ptimer_set_limit(t, 0, 1)
4) ptimer_get_count(t) <-- would return 10000 instead of 0
2) ptimer_get_count() might return incorrect value for the timer running
with a adjusted limit value.
For instance:
1) ptimer_stop(t)
2) ptimer_set_period(t, 1)
3) ptimer_set_limit(t, 10, 1)
4) ptimer_run(t)
5) ptimer_get_count(t) <-- might return value > 10
3) Neither ptimer_set_period() nor ptimer_set_freq() are adjusting the
limit value, so it is still possible to make timer timeout value
arbitrary small.
For instance:
1) ptimer_set_period(t, 10000)
2) ptimer_set_limit(t, 1, 0)
3) ptimer_set_period(t, 1) <-- bypass limit correction
Fix all of the above issues by adjusting timer period instead of the limit.
Perform the adjustment for periodic timer only. Use the delta value instead
of the limit to make decision whether adjustment is required, as limit could
be altered while timer is running, resulting in incorrect value returned by
ptimer_get_count.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: cd141f74f5737480ec586b9c7d18cce1d69884e2.1464367869.git.digetx@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Use the in kernel GIC model when running with KVM enabled.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 1464173555-12800-5-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Delay the realization of the GIC until after CPUs are
realized. This is needed for KVM as the in-kernel GIC
model will fail if it is realized with no available CPUs.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 1464173555-12800-4-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
The way we currently model the RPU subsystem is of quite
limited use. In addition to that, it causes problems for
KVM and for GDB debugging.
Make the RPU optional by adding a has_rpu property and
default to having it disabled.
This changes the default setup from having the RPU to not
longer having it.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 1464173555-12800-3-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Add a secure prop to en/disable ARM Security Extensions.
This is particularly useful for KVM runs.
Default to disabled to match the behavior of KVM.
This changes the default setup from having the ARM Security
Extensions to not longer having them.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: 1464173555-12800-2-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
If you try to gic-version=host with TCG on a KVM aarch64 host,
qemu segfaults, since host requires KVM APIs.
Explicitly reject gic-version=host if KVM is not enabled
https://bugzilla.redhat.com/show_bug.cgi?id=1339977
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Message-id: b1b3b0dd143b7995a7f4062966b80a2cf3e3c71e.1464273085.git.crobinso@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
The Aspeed AST2400 integrates a set of 14 I2C/SMBus bus controllers
directly connected to the APB bus. They can be programmed as master or
slave but the propopsed model only supports the master mode.
On the TODO list, we also have :
- improve and harden the state machine.
- bus recovery support (used by the Linux driver).
- transfer mode state machine bits. this is not strictly necessary as
it is mostly used for debug. The bus busy bit is deducted from the
I2C core engine of qemu.
- support of the pool buffer: 2048 bytes of internal SRAM (not used
by the Linux driver).
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 1464704307-25178-1-git-send-email-clg@kaod.org
[PMM: removed unused functions aspeed_i2c_bus_get_state() and
aspeed_i2c_bus_set_state()]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Treat non-secure accesses to registers and bits in registers of secure
interrupts as RAZ/WI.
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Message-id: 1464273945-2055-1-git-send-email-jens.wiklander@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Set the MMIO range limit field to 'base + size - 1' as required.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1463856217-17969-1-git-send-email-ard.biesheuvel@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
readdir_r() to readdir() conversion, various minor cleanups
# gpg: Signature made Mon 06 Jun 2016 10:52:52 BST
# gpg: using DSA key 0x02FC3AEB0101DBC2
# gpg: Good signature from "Greg Kurz <gkurz@fr.ibm.com>"
# gpg: aka "Greg Kurz <groug@free.fr>"
# gpg: aka "Greg Kurz <gkurz@linux.vnet.ibm.com>"
# gpg: aka "Gregory Kurz (Groug) <groug@free.fr>"
# gpg: aka "Gregory Kurz (Cimai Technology) <gkurz@cimai.com>"
# gpg: aka "Gregory Kurz (Meiosys Technology) <gkurz@meiosys.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 2BD4 3B44 535E C0A7 9894 DBA2 02FC 3AEB 0101 DBC2
* remotes/gkurz/tags/for-upstream:
9p: switch back to readdir()
9p: add locking to V9fsDir
9p: introduce the V9fsDir type
9p: drop useless out: label
9p: drop useless inclusion of hw/i386/pc.h
9p/fsdev: remove obsolete references to virtio
9p: some more cleanup in #include directives
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
staging
virtio-gpu: scanout fix, live migration support
vmsvga: security fixes
# gpg: Signature made Mon 06 Jun 2016 08:05:00 BST
# gpg: using RSA key 0x4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
* remotes/kraxel/tags/pull-vga-20160606-1:
virtio-gpu: add live migration support
vmsvga: don't process more than 1024 fifo commands at once
vmsvga: shadow fifo registers
vmsvga: add more fifo checks
vmsvga: move fifo sanity checks to vmsvga_fifo_length
virtio-gpu: fix scanout rectangles
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Commit fcaafb1001b9c42817714dd3b2aadcfdb997b53d accidentally broke reads from
scsi-disk devices when being updated from its original form to use the new
byte-based block functions. Add the extra missing sector to offset conversion
in order to restore read functionality.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1464931021-25117-1-git-send-email-mark.cave-ayland@ilande.co.uk
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
into staging
audio: pa volume fix, some qomifying.
# gpg: Signature made Mon 06 Jun 2016 08:01:21 BST
# gpg: using RSA key 0x4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
* remotes/kraxel/tags/pull-audio-20160606-1:
hw/audio: QOM'ify milkymist-ac97.c
hw/audio: QOM'ify intel-hda
hw/audio: QOM cleanup for intel-hda
hw/audio: QOM'ify cs4231.c
audio: pa: Set volume of recording stream instead of recording device
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
This patch changes the 9p code to use readdir() again instead of
readdir_r(), which is deprecated in glibc 2.24.
All the locking was put in place by a previous patch.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
|
|
If several threads concurrently call readdir() with the same directory
stream pointer, it is possible that they all get a pointer to the same
dirent structure, whose content is overwritten each time readdir() is
called.
We must thus serialize accesses to the dirent structure.
This may be achieved with a mutex like below:
lock_mutex();
readdir();
// work with the dirent
unlock_mutex();
This patch adds all the locking, to prepare the switch to readdir().
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
|
|
If we are to switch back to readdir(), we need a more complex type than
DIR * to be able to serialize concurrent accesses to the directory stream.
This patch introduces a placeholder type and fixes all users.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
|
|
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
|
|
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
|
|
Most of the 9p code is now virtio agnostic. This patch does a final cleanup:
- drop references to Virtio from the header comments
- fix includes
Also drop a couple of leading empty lines while here.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
|
|
The "9p-attr.h" header isn't needed by 9p synth and virtio 9p.
While here, also drop last references to virtio from 9p synth since it is
now transport agnostic code.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
|
|
This patch fixes used-uninitialized false
positive while compiling with ust tracing
backend plus gcc 4.6.3:
hw/net/e1000e.c: In function ‘e1000e_io_write’:
hw/net/e1000e.c:170:39: error: ‘idx’ may be used uninitialized in this function [-Werror=uninitialized]
hw/net/e1000e.c: In function ‘e1000e_io_read’:
hw/net/e1000e.c:145:35: error: ‘idx’ may be used uninitialized in this function [-Werror=uninitialized]
cc1: all warnings being treated as errors
make: *** [hw/net/e1000e.o] Error 1
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-id: 1465023763-10773-1-git-send-email-dmitry@daynix.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Store some additional state for cursor and resource backing storage,
so we can write out and reload things. Implement vmsave+vmload for
2d mode. Continue blocking live migration in 3d/virgl mode.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1464009727-7753-1-git-send-email-kraxel@redhat.com
|
|
vmsvga_fifo_run is called in regular intervals (on each display update)
and will resume where it left off. So we can simply exit the loop,
without having to worry about how processing will continue.
Fixes: CVE-2016-4453
Cc: qemu-stable@nongnu.org
Cc: P J P <ppandit@redhat.com>
Reported-by: 李强 <liqiang6-s@360.cn>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1464592161-18348-5-git-send-email-kraxel@redhat.com
|
|
The fifo is normal ram. So kvm vcpu threads and qemu iothread can
access the fifo in parallel without syncronization. Which in turn
implies we can't use the fifo pointers in-place because the guest
can try changing them underneath us. So add shadows for them, to
make sure the guest can't modify them after we've applied sanity
checks.
Fixes: CVE-2016-4454
Cc: qemu-stable@nongnu.org
Cc: P J P <ppandit@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1464592161-18348-4-git-send-email-kraxel@redhat.com
|
|
Make sure all fifo ptrs are within range.
Fixes: CVE-2016-4454
Cc: qemu-stable@nongnu.org
Cc: P J P <ppandit@redhat.com>
Reported-by: 李强 <liqiang6-s@360.cn>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1464592161-18348-3-git-send-email-kraxel@redhat.com
|
|
Sanity checks are applied when the fifo is enabled by the guest
(SVGA_REG_CONFIG_DONE write). Which doesn't help much if the guest
changes the fifo registers afterwards. Move the checks to
vmsvga_fifo_length so they are done each time qemu is about to read
from the fifo.
Fixes: CVE-2016-4454
Cc: qemu-stable@nongnu.org
Cc: P J P <ppandit@redhat.com>
Reported-by: 李强 <liqiang6-s@360.cn>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1464592161-18348-2-git-send-email-kraxel@redhat.com
|
|
ust trace backend has limitation of maximum 10
arguments per event. Traces with more arguments
cannot be compiled for this backend.
Trace e1000e_rx_rss_ip6 introduced by previous
commits has 11 arguments and fails to compile with
ust trace backend.
This patch fixes the problem by splitting this
tracepoint into two successive tracepoints with
smaller number of arguments.
For more information see comment regarding TP_ARGS
in lttng/tracepoint.h:
/*
* TP_ARGS takes tuples of type, argument separated by a comma.
* It can take up to 10 tuples (which means that less than 10 tuples is
* fine too).
* Each tuple is also separated by a comma.
*/
Build log generated by this problem:
In file included from ./trace/generated-tracers.h:9:0,
from /home/travis/build/qemu/qemu/include/trace.h:4,
from util/oslib-posix.c:36:
./trace/generated-ust-provider.h:16556:3: error: unknown type name ‘_TP_EXPROTO_Bool’
In file included from /home/travis/build/qemu/qemu/include/trace.h:4:0,
from util/oslib-posix.c:36:
./trace/generated-tracers.h: In function ‘trace_e1000e_rx_rss_ip6’:
./trace/generated-tracers.h:8379:431: error: expected string literal before ‘_SDT_ASM_OPERANDS_ipv6_enabled’
./trace/generated-tracers.h:8379:431: error: implicit declaration of function ‘__tracepoint_cb_qemu___e1000e_rx_rss_ip6’ [-Werror=implicit-function-declaration]
./trace/generated-tracers.h:8379:431: error: nested extern declaration of ‘__tracepoint_cb_qemu___e1000e_rx_rss_ip6’ [-Werror=nested-externs]
cc1: all warnings being treated as errors
make: *** [util/oslib-posix.o] Error 1
make: *** Waiting for unfinished jobs....
In file included from ./trace/generated-tracers.h:9:0,
from /home/travis/build/qemu/qemu/include/trace.h:4,
from util/hbitmap.c:16:
./trace/generated-ust-provider.h:16556:3: error: unknown type name ‘_TP_EXPROTO_Bool’
In file included from /home/travis/build/qemu/qemu/include/trace.h:4:0,
from util/hbitmap.c:16:
./trace/generated-tracers.h: In function ‘trace_e1000e_rx_rss_ip6’:
./trace/generated-tracers.h:8379:431: error: expected string literal before ‘_SDT_ASM_OPERANDS_ipv6_enabled’
./trace/generated-tracers.h:8379:431: error: implicit declaration of function ‘__tracepoint_cb_qemu___e1000e_rx_rss_ip6’ [-Werror=implicit-function-declaration]
./trace/generated-tracers.h:8379:431: error: nested extern declaration of ‘__tracepoint_cb_qemu___e1000e_rx_rss_ip6’ [-Werror=nested-externs]
cc1: all warnings being treated as errors
make: *** [util/hbitmap.o] Error 1
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Message-id: 1464894748-27803-1-git-send-email-dmitry@daynix.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
* Drop the old SysBus init function and use instance_init
* Move AUD_open_in / AUD_open_out function into realize stage
Acked-by: Michael Walle <michael@walle.cc>
Tested-by: Michael Walle <michael@walle.cc>
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1463111220-30335-5-git-send-email-zxq_yx_007@163.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
* use DeviceClass::realize instead of DeviceClass::init
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1463111220-30335-4-git-send-email-zxq_yx_007@163.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
drop the DO_UPCAST macro
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1463111220-30335-3-git-send-email-zxq_yx_007@163.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Drop the old SysBus init function and use instance_init
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Message-id: 1463111220-30335-2-git-send-email-zxq_yx_007@163.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Commit "ca58b45 ui/virtio-gpu: add and use qemu_create_displaysurface_pixman"
breaks scanouts which use a region of the underlying resource only.
So, we need another way to handle the underlying issue. Lets create a
new pixman image, grab a reference on the pixman providing the
underlying storage, hook up a destroy callback which releases the
reference. That way regions work again and releasing the backing
storage should still be impossible thanks to the extra reference we are
holding.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 1464597655-26341-1-git-send-email-kraxel@redhat.com
|
|
staging
# gpg: Signature made Thu 02 Jun 2016 07:23:18 BST using RSA key ID 398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request: (31 commits)
Add ENET device to i.MX6 SOC.
Add ENET/Gbps Ethernet support to FEC device
i.MX: move FEC device to a register array structure.
i.MX: Rename i.MX FEC defines to ENET_XXX
i.MX: reset TX/RX descriptors when FEC is disabled.
i.MX: Fix FEC code for ECR register reset value.
i.MX: Fix FEC code for MDIO address selection
i.MX: Fix FEC code for MDIO operation selection
net: handle optional VLAN header in checksum computation.
net: improve UDP/TCP checksum computation.
e1000e: Introduce qtest for e1000e device
net: Introduce e1000e device emulation
e1000: Move out code that will be reused in e1000e
e1000_regs: Add definitions for Intel 82574-specific bits
vmxnet3: Use pci_dma_* API instead of cpu_physical_memory_*
net_pkt: Extend packet abstraction as required by e1000e functionality
rtl8139: Move more TCP definitions to common header
net_pkt: Name vmxnet3 packet abstractions more generic
vmxnet3: Use common MAC address tracing macros
net: Add macros for MAC address tracing
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
This adds the ENET device to the i.MX6 SOC.
This was tested by booting Linux on an Qemu i.MX6 instance and accessing
the internet from the linux guest.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Signed-off-by: Jason Wang <jasowang@redhat.com>
|
|
The ENET device (present in i.MX6) is "derived" from FEC and backward
compatible with it.
This patch adds the necessary support of the added feature in the ENET
device to allow Linux to use it (on supported processors).
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Signed-off-by: Jason Wang <jasowang@redhat.com>
|