aboutsummaryrefslogtreecommitdiff
path: root/hw
AgeCommit message (Collapse)Author
2012-06-07shpc: unparent device before freeMichael S. Tsirkin
Recent core change removed unparent so we need to do this in all callers now. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-06-07ehci: rework frame skippingGerd Hoffmann
Move the framecount check out of the loop and use the new ehci_update_frindex function to skip frames if needed. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-06-07ehci: adaptive wakeup rate.Gerd Hoffmann
Adapt the frame timer sleeps according to the actual needs. With the periodic schedule being active we'll have to wakeup 1000 times per second and go check for work. In case only the async schedule is active we can be more lazy though. When idle ehci will increate the sleep time step by step, so qemu has to wake up less frequently. When we'll see transactions on the bus or the guest fiddles with the schedule enable/disable bits we'll return to a 1000 Hz wakeup rate and full speed. With both schedules disabled we stop wakeups altogether. This patch also drops the freq property (configures wakeup rate manually) which is obsoleted by this patch. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-06-07ehci: create ehci_update_frindexGerd Hoffmann
Factor out code from ehci_frame_timer. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-06-07ehci: remove unused attach_poll_counterGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-06-07ehci: fix halt status handlingGerd Hoffmann
When the enable bits for controller / async schedule / periodic schedule change just make sure we kick the frame timer and let ehci_advance_periodic_state and ehci_advance_async_state handle the controller state changes. This will make ehci set USBSTS_HALT when the controller shutdown is actually done, once both schedules are in inactive state and the USBSTS_PSS and USBSTS_ASS bits are clear. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-06-07ehci: update status bits in ehci_set_stateGerd Hoffmann
Update the status register in the ehci_set_state function, to make sure the guest-visible register is in sync with our internal schedule state. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-06-07ehci: add ehci_*_enabled() helpersGerd Hoffmann
Add helper functions to query whenever the async / periodic schedule is enabled or not. Put them into use too. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-06-07ehci: fix resetGerd Hoffmann
Check for the reset bit first when processing USBCMD register writes. Also break out of the switch, there is no need to check the other bits. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-06-07ehci: kick async schedule on wakeupGerd Hoffmann
Kick async schedule when we get a wakeup notification from a usb device. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-06-07ehci: schedule async bh on async packet completionGerd Hoffmann
When a packet completes which happens to be part of the async schedule kick the async bottom half for processing, Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-06-07ehci: move async schedule to bottom halfGerd Hoffmann
This way we can kick the async schedule independant from the periodic frame timer. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-06-07ehci: add async field to EHCIQueueGerd Hoffmann
Keep track whenever a EHCIQueue is part of the async or periodic schedule. This way we don't have to pass around the async flag everywhere but can look it up from the EHCIQueue struct when needed. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-06-07ehci: tweak queue initializationGerd Hoffmann
Little tweak for the queue initialization, set the QH address in the allocation function. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-06-07ehci: add queuing supportGerd Hoffmann
Add packet queuing. Follow the qTD chain to see if there are more packets we can submit. Improves performance on larger transfers, especially with usb-host, as we don't have to wait for a packet to finish before sending the next one to the host for processing. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-06-07ehci: move ehci_flush_qhGerd Hoffmann
Move ehci_flush_qh() function up in the source code. No code change. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-06-07ehci: cache USBDevice in EHCIQueueGerd Hoffmann
Keep a USBDevice pointer in EHCIQueue so we don't have to lookup the device on each usb packet submission. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-06-07ehci: make ehci_execute work on EHCIPacket instead of EHCIQueueGerd Hoffmann
This way it is possible to use ehci_execute to submit others than the first EHCIPacket of the EHCIQueue. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-06-07ehci: add EHCIPacketGerd Hoffmann
Add a separate EHCIPacket struct and move fields over from EHCIQueue. Preparing for supporting multiple packets per queue being in flight at the same time. No functional changes yet. Fix some codestyle issues along the way. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-06-07xhci: trace: slotsGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-06-07xhci: trace: transfersGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-06-07xhci: trace: endpointsGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-06-07xhci: trace: ring fetchGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-06-07xhci: trace: irq + eventsGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-06-07xhci: trace: run+stopGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-06-07xhci: trace: mmio reads+writesGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-06-07xhci: Clean up reset functionJan Kiszka
Properly register reset function via the device class. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-06-07usb-storage: migration supportGerd Hoffmann
With all scsi migration support bits in place the final step is pretty simple ;) Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-06-07usb-storage: add scsi_off, remove scsi_bufGerd Hoffmann
Repace the running buffer pointer (scsi_buf) with a buffer offset field (scsi_off). The later is alot easier to live-migrate. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-06-07usb-storage: add usb_msd_packet_complete()Gerd Hoffmann
Factor out packet completion to a separate function which cares to get the MSDState->packet update right. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-06-07usb-storage: remove MSDState->residueGerd Hoffmann
We have the field twice, once in MSDState directly and one in the status word struct. Drop one. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-06-07scsi: prepare migration code for usb-storage supportGerd Hoffmann
usb-storage can't handle requests in one go as the data transfer can be splitted into lots of usb packets. Because of that there can be normal in-flight requests at savevm time and we need to handle that. With other scsi hba's this happens only in case i/o is stopped due to errors and there are pending requests which need to be restarted (req->retry = true). So, first we need to save req->retry and then handle the req->retry = false case. Write requests are handled fine already. For read requests we have to save the buffer as we will not restart the request (and thus not refill the buffer) on the target host. Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-06-07uhci: fix irq routingGerd Hoffmann
The multifunction ich9 ehci controller with uhci companions uses a different interrupt pin for each function. The three uhci devices get pins A, B and C, whereas ehci uses pin D. This way the guest can assign different IRQ lines to each controller. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-06-07uhci: zap uhci_pre_saveGerd Hoffmann
Cancel transactions before saving vmstate is pretty pointless and just causes disruptions. We need to cancel them before *loading* vmstate, but in that case uhci_reset() handles it already and no special action is needed. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-06-07uhci: make bandwidth tunableGerd Hoffmann
Add a property for the uhci bandwidth. Can be used to make uhci emulation run faster than real hardware. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-06-07uhci: use bottom halfGerd Hoffmann
Schedule bottom half on completion of async packets instead of calling uhci_process_frame directly. This way we run uhci_process_frame only once in case multiple packets finish in a row. Also check whenever there is bandwidth left before scheduling uhci_process_frame. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-06-07uhci: fix bandwidth managementGerd Hoffmann
uhci_process_frame() can be invoked multiple times per frame, so accounting usb bandwith in a local variable doesn't fly, use a variable in UHCIState instead. Also check the limit more frequently. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-06-07build: move device tree to per-target Makefile.objsPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-06-07build: move per-target hw/ objects to nested Makefile.objsPaolo Bonzini
This completes the move to nested Makefiles for virtio and a few other files that were not part of obj-TARGET-y, but still were compiled separately for each target. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-06-07build: convert libhw to nested Makefile.objsPaolo Bonzini
After this patch, the libhw* directories will have a hierarchy that mimics the source tree. This is useful because we do have a couple of files there that are in the top source directory. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-06-07build: move target-independent hw/ objects to nested Makefile.objsPaolo Bonzini
This patch starts converting the hw/ directory. Some files in hw/ are compiled once, some twice (32-/64-bit), some once per target. Each category is moved in a separate patch. After this patch, the files that are compiled once will show the same hierarchy in the build tree as they do in the source tree, for example hw/qdev.o instead of just qdev.o. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-06-07build: move obj-TARGET-y variables to nested Makefile.objsPaolo Bonzini
Also drop duplicate occurrence of device-hotplug.o. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-06-06Merge remote-tracking branch 'qmp/queue/qmp' into stagingAnthony Liguori
* qmp/queue/qmp: (29 commits) Add 'query-events' command to QMP to query async events qapi: convert netdev_del qapi: convert netdev_add net: net_client_init(): use error_set() net: purge the monitor object from all init functions qemu-config: introduce qemu_find_opts_err() qemu-config: find_list(): use error_set() qerror: introduce QERR_INVALID_OPTION_GROUP qemu-option: qemu_opts_from_qdict(): use error_set() qemu-option: introduce qemu_opt_set_err() qemu-option: opt_set(): use error_set() qemu-option: qemu_opts_validate(): use error_set() qemu-option: qemu_opt_parse(): use error_set() qemu-option: parse_option_size(): use error_set() qemu-option: parse_option_bool(): use error_set() qemu-option: parse_option_number(): use error_set() qemu-option: qemu_opts_create(): use error_set() introduce a new monitor command 'dump-guest-memory' to dump guest's memory make gdb_id() generally avialable and rename it to cpu_index() target-i386: Add API to get note's size ...
2012-06-06Merge remote-tracking branch 'afaerber-or/qom-cpu-3' into stagingAnthony Liguori
* afaerber-or/qom-cpu-3: (74 commits) Kill off cpu_state_reset() linux-user: Use cpu_reset() after cpu_init() / cpu_copy() bsd-user: Use cpu_reset() in after cpu_init() leon3: Store SPARCCPU in ResetData leon3: Use cpu_sparc_init() to obtain SPARCCPU sun4u: Store SPARCCPU in ResetData sun4u: Let cpu_devinit() return SPARCCPU sun4u: Use cpu_sparc_init() to obtain SPARCCPU sun4m: Pass SPARCCPU to {main,secondary}_cpu_reset() sun4m: Use cpu_sparc_init() to obtain SPARCCPU target-sparc: Let cpu_sparc_init() return SPARCCPU cpu-exec: Use cpu_reset() in cpu_exec() for TARGET_PPC virtex_ml507: Pass PowerPCCPU to main_cpu_reset() virtex_ml507: Let ppc440_init_xilinx() return PowerPCCPU virtex_ml507: Use cpu_ppc_init() to obtain PowerPCCPU ppc_prep: Pass PowerPCCPU to ppc_prep_reset() ppc_prep: Use cpu_ppc_init() to obtain PowerPCCPU ppc_oldworld: Pass PowerPCCPU to ppc_heathrow_reset() ppc_oldworld: Use cpu_ppc_init() to obtain PowerPCCPU ppc_newworld: Pass PowerPCCPU to ppc_core99_reset() ...
2012-06-05Revert "Revert "rtl8139: do the network/host communication only in normal ↵Anthony Liguori
operating mode"" This reverts commit 9c92bf7f6c3f675e60b8ba8a5287bb88ea1eac36. Per Jason's request. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-06-04leon3: Store SPARCCPU in ResetDataAndreas Färber
Allows us to use cpu_reset() in place of cpu_state_reset() in main_cpu_reset(). Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Blue Swirl <blauwirbel@gmail.com>
2012-06-04leon3: Use cpu_sparc_init() to obtain SPARCCPUAndreas Färber
Needed for main_cpu_reset(). Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Blue Swirl <blauwirbel@gmail.com>
2012-06-04sun4u: Store SPARCCPU in ResetDataAndreas Färber
We can now use cpu_reset() in place of cpu_state_reset() in main_cpu_reset(). Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Blue Swirl <blauwirbel@gmail.com>
2012-06-04sun4u: Let cpu_devinit() return SPARCCPUAndreas Färber
Needed for main_cpu_reset(). Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Blue Swirl <blauwirbel@gmail.com>
2012-06-04sun4u: Use cpu_sparc_init() to obtain SPARCCPUAndreas Färber
This prepares using it in sun4uv_init(). Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Blue Swirl <blauwirbel@gmail.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-16 13:35:03 +0000