| Age | Commit message (Collapse) | Author |
|---|
|
Ignore any regions not belonging to a specified address space.
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
This way the accelerator (kvm) can handle them directly.
Signed-off-by: Avi Kivity <avi@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
|
|
This allows reverse iteration, which in turns allows consistent ordering
among multiple listeners:
l1->add
l2->add
l2->del
l1->del
Signed-off-by: Avi Kivity <avi@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
|
|
Although qxl creates a shared displaysurface when the qxl surface is
upright and doesn't need to be flipped there is no guarantee that the
surface doesn't become unshared for some reason. Rename qxl_flip to
qxl_blit and fix it to handle both flip and non-flip cases.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
This patch adds an 64bit pci bar for vram. It is turned off by default.
It can be enabled by setting the size of the 64bit bar to be larger than
the 32bit bar. Both 32bit and 64bit bar refer to the same memory. Only
the first part of the memory is available via 32bit bar.
The intention is to allow large vram sizes for 64bit guests, by allowing
the vram bar being mapped above 4G, so we don't have to squeeze it into
the pci I/O window below 4G.
With vram_size_mb=16 and vram64_size_mb=256 it looks like this:
00:02.0 VGA compatible controller: Red Hat, Inc. Device 0100 (rev 02) (prog-if 00 [VGA controller])
Subsystem: Red Hat, Inc Device 1100
Physical Slot: 2
Flags: fast devsel, IRQ 10
Memory at f8000000 (32-bit, non-prefetchable) [size=64M]
Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
Memory at fd020000 (32-bit, non-prefetchable) [size=8K]
I/O ports at c5a0 [size=32]
Memory at ffe0000000 (64-bit, prefetchable) [size=256M]
Expansion ROM at fd000000 [disabled] [size=64K]
[ mapping above 4G needs patched seabios:
http://www.kraxel.org/cgit/seabios/commit/?h=pci64 ]
|
|
* aneesh/for-upstream:
hw/9pfs: Endian fixes for virtfs
./configure: add option for disabling VirtFS
|
|
When creating an USB device the old way, there is no way to specify the
target bus. Thus the warning issued by usb_create makes no sense and
rather confuses our users.
Resolve this by passing a bus reference to the usbdevice_init handler
and letting those handlers forward it to usb_create.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Drop the "ehci under development" banner.
Drop unused & inactive (#if 0) code.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Before this patch the ehci code was not checking for any other errors other
then USB_RET_NAK. This causes 2 problems:
1) Other errors are not reported to the guest.
2) When transactions with the ITD_XACT_IOC bit set completing with another
error would not result in USBSTS_INT getting set.
I hit this problem when unplugging devices while iso data was streaming from
the device to the guest. When this happens it takes a while for the guest to
process the unplugging and remove ISO transactions from the ehci schedule, in
the mean time these transactions would complete with a result of USB_RET_NODEV,
which was not handled. This lead to the Linux guest's usb subsystem "hanging",
that is it would no longer see new usb devices getting plugged in and running
for example lsusb would lead to a stuck (D state) lsusb process. This patch
fixes this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Before commit ed5a83ddd8c1d8ec7b1015315530cf29949e7c48 each device
provided it's own response to USB_REQ_GET_STATUS, but after it that
response was based on bmAttributes, which was errounously set for
usb-ccid as 0xa0 and not 0xe0.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Check for dev->config being NULL in two places:
USB_REQ_GET_CONFIGURATION and USB_REQ_GET_STATUS.
The behavior of USB_REQ_GET_STATUS is unspecified in the Default state,
that corresponds to dev->config being NULL (it defaults to NULL and is
reset whenever a SET_CONFIGURATION with value 0, or attachment). I
implemented it to correspond with the state before
ed5a83ddd8c1d8ec7b1015315530cf29949e7c48, the commit moving SET_STATUS
to usb-desc; if dev->config is not set we return whatever is in the
first configuration.
The behavior of USB_REQ_GET_CONFIGURATION is also undefined before any
SET_CONFIGURATION, but here we just return 0 (same as specified for the
Address state).
A win7 guest failed to initialize the device before this patch,
segfaulting when GET_STATUS was called with dev->config == NULL. With
this patch the passthrough device still doesn't work but the failure is
unrelated.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
This patch adds a sanity check to itd processing to make sure the
endpoint addressed by the guest is actually an iso endpoint. Also
verify that usb drivers don't return USB_RET_ASYNC which is illegal for
iso xfers.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
qemu usb core has packet queues now, so flip lets the switch.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
When a usb device is busy processing a packet (and returns
USB_RET_ASYNC), continue walking the transfer descriptor list
and process them to fill the request queue.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Restruct the uhci_handle_td return code processing to make the
control flow more clear and the code more readable.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
UHCIAsync structs (in-flight requests) grouped in UHCIQueue now.
Each (active) usb endpoint gets its own UHCIQueue.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Two reset fixes:
* pick up s->usbcmd value after ehci_reset call to make sure it
keeps the reset value and doesn't get rubbish filled in when
val is written back to the mmio register array later on.
* make sure the frame timer is zapped on reset.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Activate usb hid pointer devices (mouse+tablet) unconditionally
on polls, even if we NAK the poll due to lack of new events.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
RHBZ# 747011
Removes the last user of QXL_SYNC when using update drivers that use the
_ASYNC io ports.
The last user is qxl_render_update, it is called both by qxl_hw_update
which is the vga_hw_update_ptr passed to graphic_console_init, and by
qxl_hw_screen_dump.
At the same time the QXLRect area being passed to the red_worker thread
is passed as a copy, as part of the QXLCookie.
The implementation uses interface_update_area_complete with a bh to make
sure dpy_update and qxl_flip are called from the io thread, otherwise
the vga->ds->surface.data can change under our feet.
With this patch sdl+spice works fine. But spice by itself doesn't
produce the expected screendumps unless repeated a few times, due to
ppm_save being called before update_area (rendering done in spice server
thread) having a chance to complete. Fixed by next patch, but see commit
message for problem introduced by it.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Will be used in the next patch.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Tested on linux and windows guests. For negative stride, qxl_flip copies
directly to vga->ds->surface->data, for positive it's reallocated to
share qxl->guest_primary.data
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
drop all ifdefs on SPICE_INTERFACE_QXL_MINOR >= 1 as a result,
any check for SPICE_SERVER_VERSION that is now always satisfied,
and SPICE_INTERFACE_CORE_MINOR >= 3 tests, because
0.8.2 has SPICE_INTERFACE_QXL_MINOR == 1 and
SPICE_INTERFACE_CORE_MINOR == 3.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
It was never used. Introduced in
5ff4e36c804157bd84af43c139f8cd3a59722db9
qxl: async io support using new spice api
But not used even then.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
regression introduced by 075360945860ad9bdd491921954b383bf762b0e5,
v2: lock around qemu_spice_cursor_refresh_unlocked
Reported-by: Fabiano Fidêncio <fabiano@fidencio.org>
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
These days one just needs to specify the romfile in PCiDeviceInfo and
everything magically works. It also allows to disable pxe rom loading
via "romfile=<emptystring>" like it is possible for all other nics.
[ v2: rebased & adapted to qom changes ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
switch console only if needed, also pass down whenever the console was
switched or not because a displaysurface redraw is only needed in case
the console was switched.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
The code in console.c verifies whenever a screen_dump function
pointer is present before calling it, so there is no need to supply an
dummy function. Remove them. Also report an error to notify the user
that he didn't got a screenshot.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
The displaychangelistener isn't needed at all, we can simply save the
image when vga_hw_update is done instead of hooking into the update
process.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Make the acpi timer wake up the guest.
Guests can enable/disable this via acpi too.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Make the rtc wake up the guest when the alarm fires.
Add acpi windup to property support RTC_EN, so guests
can enable and disable this.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Add a 'wakeup' property to the serial port. It is off by default. When
enabled any incoming character on the serial line will wake up the
guest. Useful for guests which have a serial console configured.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This patch adds wakeup support to ps/2 emulation. Any key press on the
ps/2 keyboard will wakeup the guest. Likewise any mouse button press
will wakeup the guest. Mouse moves are ignored, so the guest will not
wakeup in case your mouse crosses the vnc window of a suspended guest by
accident.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This patch switches pc s3 suspend over to the new infrastructure.
The cmos_s3 qemu_irq is killed, the new notifier is used instead.
The xen hack goes away with that too, the hypercall can simply be
done in a notifier function now.
This patch also makes the guest actually stay suspended instead
of leaving suspend instantly, so it is useful for more than just
testing whenever the suspend/resume cycle actually works.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Do APCIREGS->pm1.evt.en updates using the new acpi_pm1_evt_write_en
function, so the acpi code will see those updates.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Pretty pointless, can easily be reached via ACPIREGS now.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
All those acpi structs are not independent from each other.
Various acpi functions expecting multiple acpi structs passed
in are a clean indicator for that ;)
So this patch bundles all acpi structs in the new ACPIREGS
struct, then use it everythere pass around acpi state.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Group all structs at the top of hw/acpi.h.
Just moving around lines, no code changes.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
* qmp/queue/qmp:
qmp: add DEVICE_TRAY_MOVED event
ide: drop ide_tray_state_post_load()
block: Don't call bdrv_eject() if the tray state didn't change
block: bdrv_eject(): Make eject_flag a real bool
block: Rename bdrv_mon_event() & BlockMonEventAction
|
|
* bonzini/virtio-scsi:
scsi-block: always use scsi_generic_ops for cache != none
scsi: fix searching for an empty id
scsi: fix wrong return for target INQUIRY
virtio-scsi: add migration support
virtio-scsi: process control queue requests
virtio-scsi: add basic SCSI bus operation
virtio-scsi: Add basic request processing infrastructure
virtio-scsi: Add virtio-scsi stub device
scsi-disk: add migration support
scsi-generic: add migration support
scsi: add SCSIDevice vmstate definitions
scsi-disk: enable scatter/gather functionality
scsi: add scatter/gather functionality
scsi: pass residual amount to command_complete
ahci: use new DMA helpers
dma-helpers: add accounting wrappers
dma-helpers: add dma_buf_read and dma_buf_write
dma-helpers: make QEMUSGList target independent
|
|
The commit's purpose is laudable:
The only way for chardev drivers to communicate an error was to
return a NULL pointer, which resulted in an error message that
said _that_ something went wrong, but not _why_.
It attempts to achieve it by changing the interface to return 0/-errno
and update qemu_chr_open_opts() to use strerror() to display a more
helpful error message. Unfortunately, it has serious flaws:
1. Backends "socket" and "udp" return bogus error codes, because
qemu_chr_open_socket() and qemu_chr_open_udp() assume that
unix_listen_opts(), unix_connect_opts(), inet_listen_opts(),
inet_connect_opts() and inet_dgram_opts() fail with errno set
appropriately. That assumption is wrong, and the commit turns
unspecific error messages into misleading error messages. For
instance:
$ qemu-system-x86_64 -nodefaults -vnc :0 -chardev socket,id=bar,host=xxx
inet_connect: host and/or port not specified
chardev: opening backend "socket" failed: No such file or directory
ENOENT is what happens to be in my errno when the backend returns
-errno. Let's put ERANGE there just for giggles:
$ qemu-system-x86_64 -nodefaults -vnc :0 -chardev socket,id=bar,host=xxx -drive if=none,iops=99999999999999999999
inet_connect: host and/or port not specified
chardev: opening backend "socket" failed: Numerical result out of range
Worse: when errno happens to be zero, return -errno erroneously
signals success, and qemu_chr_new_from_opts() dies dereferencing
uninitialized chr. I observe this with "-serial unix:".
2. All qemu_chr_open_opts() knows about the error is an errno error
code. That's simply not enough for a decent message. For instance,
when inet_dgram() can't resolve the parameter host, which errno code
should it use? What if it can't resolve parameter localaddr?
Clue: many backends already report errors in their open methods.
Let's revert the flawed commit along with its dependencies, and fix up
the silent error paths instead.
This reverts commit 6e1db57b2ac9025c2443c665a0d9e78748637b26.
Conflicts:
console.c
hw/baum.c
qemu-char.c
This reverts commit aad04cd024f0c59f0b96f032cde2e24eb3abba6d.
The parts of commit db418a0a "Add stdio char device on windows" that
depend on the reverted change fixed up.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The conditions for detecting no free target or LUN were wrong.
The LUN loop was followed by an "if" condition that is never
true, because the loop is exited as soon as lun becomes equal
to bus->info->max_lun, and never becomes greater than it.
The target loop had a wrong condition (<= instead of <). Once
this is fixed, the loop would fail in the same way as the LUN
loop.
The fix is to see whether scsi_device_find returned the device with the
last (channel, target, LUN) pair, and fail if so.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This patch fixes several endian bugs in virtfs.
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
|
|
This is used to sync the physical tray state after migration when
using CD-ROM passthrough. However, migrating when using passthrough
is broken anyway and shouldn't be supported...
So, drop this function as it causes a problem with the DEVICE_TRAY_MOVED
event, which is going to be introduced by the next commit.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
|
|
It's not needed. Besides we can then assume that bdrv_eject() is
only called when there's a tray state change, which is useful to
the DEVICE_TRAY_MOVED event (going to be added in a future
commit).
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
|
