aboutsummaryrefslogtreecommitdiff
path: root/hw
AgeCommit message (Collapse)Author
2012-09-15Remove unused CONFIG_TCG_PASS_AREG0 and dead codeBlue Swirl
Now that CONFIG_TCG_PASS_AREG0 is enabled for all targets, remove dead code and support for !CONFIG_TCG_PASS_AREG0 case. Remove dyngen-exec.h and all references to it. Although included by hw/spapr_hcall.c, it does not seem to use it. Remove unused HELPER_CFLAGS. Signed-off-by: Blue Swirl <blauwirbel@gmail.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2012-09-11xhci: allow bytewise capability register readsGerd Hoffmann
Some guests need this according to Alejandro Martinez Ruiz <alex@securiforest.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11xhci: kill xhci_mem_{read,write} dispatcher functionsGerd Hoffmann
... and register subregions instead, so we offload the dispatching to the the memory subsystem which is designed to handle it. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11xhci: support multiple interruptersGerd Hoffmann
Everything is in place, flip the big switch now and enable support for multiple interrupters. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11xhci: pick target interrupterGerd Hoffmann
Pick the correct interrupter when queuing an event. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11xhci: prepare xhci_runtime_{read,write} for multiple interruptersGerd Hoffmann
Prepare xhci runtime register access function for multiple interrupters. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11xhci: add XHCIInterrupterGerd Hoffmann
Move all state belonging to the (single) interrupter into a separate struct. First step in adding support for multiple interrupters. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11xhci: move register update into xhci_intr_raiseGerd Hoffmann
Now that we have a separate function to raise an IRQ we can move some comon code into the function. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11xhci: add msix supportGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11xhci: rework interrupt handlingGerd Hoffmann
Split xhci_irq_update into a function which handles intx updates (including lowering the irq line once the guests acks the interrupt) and one which is used for raising an irq only. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11xhci: fix & cleanup msi.Gerd Hoffmann
Drop custom write_config function which isn't needed any more. Make the msi property a bit property so it accepts 'on' & 'off'. Enable MSI by default. TODO: add compat property to disable on old machine types. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11usb-storage: usb3 supportGerd Hoffmann
Add usb3 descriptors to usb-storage, so it shows up as superspeed device when connected to xhci. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11usb3: bos decriptorGerd Hoffmann
Add support for creating BOS descriptor and device cappability descriptors. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11usb3: superspeed endpoint companionGerd Hoffmann
Add support for building superspeed endpoint companion descriptors, create them for superspeed usb devices. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11usb3: superspeed descriptorsGerd Hoffmann
Add superspeed descriptor entry to USBDesc, advertise superspeed support when present. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11xhci: update port handlingGerd Hoffmann
This patch changes the way xhci ports are linked to USBPorts. The fixed 1:1 relationship between xhci ports and USBPorts is gone. Now each USBPort represents a physical plug which has usually two xhci ports assigned: one usb2 and ond usb3 port. usb devices show up at one or the other, depending on whenever they support superspeed or not. This patch also makes the number of usb2 and usb3 ports runtime configurable by adding 'p2' and 'p3' properties. It is allowed to have different numbers of usb2 and usb3 ports. Specifying p2=4,p3=2 will give you an xhci adapter which supports all speeds on physical ports 1+2 and usb2 only on ports 3+4.
2012-09-11xhci: update register layoutGerd Hoffmann
Change the register layout to be a bit more sparse and also not depend on the number of ports. Useful when for making the number of ports runtime-configurable.
2012-09-11xhci: fix runtime write tracepointGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11xhci: add trace_usb_xhci_ep_set_dequeueGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11xhci: trace cc codes in cleartextGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11xhci: iso xfer supportGerd Hoffmann
Add support for iso transfers. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11xhci: implement mfindexGerd Hoffmann
Implement mfindex register and mfindex wrap event. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11xhci: move device lookup into xhci_setup_packetGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11xhci: drop bufferingGerd Hoffmann
This patch splits the xhci_xfer_data function into three. The xhci_xfer_data function used to do does two things: (1) copy transfer data between guest memory and a temporary buffer. (2) report transfer results to the guest using events. Now we three functions to handle this: (1) xhci_xfer_map creates a scatter list for the transfer and uses that (instead of the temporary buffer) to build a USBPacket. (2) xhci_xfer_unmap undoes the mapping. (3) xhci_xfer_report sends out events. The patch also fixes reporting of transaction errors which must be reported unconditinally, not only in case the guest asks for it using the ISP flag. [ v2: fix warning ] Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11xhci: rip out background transfer codeGerd Hoffmann
original xhci code (the one which used libusb directly) used to use 'background transfers' for iso streams. In upstream qemu the iso stream buffering is handled by usb-host & usb-redir, so we will never ever need this. It has been left in as reference, but is dead code anyway. Rip it out. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11usb-audio: fix usb versionGerd Hoffmann
usb-audio is a full speed (1.1) device, but bcdUSB claims it is usb 2.0. Fix it. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11Better name usb braille deviceSamuel Thibault
Windows users need to know that they have to use the Baum driver to make the qemu braille device work. Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11usb-redir: Enable pipelining for bulk endpointsHans de Goede
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11usb-redir: Ensure our peer has the necessary caps when redirecting to XHCIHans de Goede
In order for redirection to work properly when redirecting to an emulated XHCI controller, the usb-redir-host must support both usb_redir_cap_ep_info_max_packet_size and usb_redir_cap_64bits_ids, reject any devices redirected to an XHCI controller when these are not supported. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11usb-redir: Add a usbredir_reject_device helper functionHans de Goede
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11usb-redir: Set ep max_packet_size if availableHans de Goede
This is needed for usb-redir to work properly with the xhci emulation. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11usb-redir: Convert to new libusbredirparser 0.5 APIHans de Goede
This gives us support for 64 bit ids which is needed for using XHCI with the new hcd generated ids. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11usb-redir: Return babble when getting more bulk data then requestedHans de Goede
Babble is the appropriate error in this case (rather then signalling a stall). Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11usb-redir: Move to core packet id and queue handlingHans de Goede
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11usb-redir: Get rid of unused async-struct dev memberHans de Goede
This is a preparation patch for completely getting rid of the async-packet struct in usb-redir, instead relying on the (new) per ep queues in the qemu usb core. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11usb-redir: Get rid of local shadow copy of packet headersHans de Goede
The shadow copy only serves as an extra check (besides the packet-id) to ensure the packet we get back is a reply to the packet we think it is. This check has never triggered in all the time usb-redir is in use now, and since the verified data in the returned packet-header is not used otherwise, removing the check does not open any possibilities for the usbredirhost to confuse us. This is a preparation patch for completely getting rid of the async-packet struct in usb-redir, instead relying on the (new) per ep queues in the qemu usb core. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11usb-redir: Get rid of async-struct get memberHans de Goede
This is a preparation patch for completely getting rid of the async-packet struct in usb-redir, instead relying on the (new) per ep queues in the qemu usb core. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11usb-redir: Don't delay handling of open events to a bottom halfHans de Goede
There is no need for this, and doing so means that a backend trying to write immediately after an open event will see qemu_chr_be_can_write returning 0, which not all backends handle well as there is no wakeup mechanism to detect when the frontend does become writable. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11usb-redir: Never return USB_RET_NAK for async handled packetsHans de Goede
USB_RET_NAK is not a valid response for async handled packets (and will trigger an assert as such). Also drop the warning when receiving a status of cancelled for packets not cancelled by qemu itself, this can happen when a device gets unredirected by the usbredir-host while transfers are pending. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11ehci: Correct a comment in fetchqtd packet processingHans de Goede
Since my previous comment said "Should never happen", I tried changing the next line to an assert(0), which did not go well, which as the new comments explains is logical if you think about it for a moment. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11ehci: Handle USB_RET_PROCERR in ehci_fill_queueHans de Goede
USB_RET_PROCERR can be triggered by the guest (by for example requesting more then BUFFSIZE bytes), so don't assert on it. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11ehci: Fix memory leak in handling of NAK-ed packetsHans de Goede
Currently each time we try to execute a NAK-ed packet we redo ehci_init_transfer, and usb_packet_map, re-allocing (without freeing) the sg list every time. This patch fixes this, it does this by introducing another async state, so that we also properly cleanup a NAK-ed packet on cancel. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11ehci: Add some additional ehci_trace_guest_bug() callsHans de Goede
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11ehci: add doorbell trace eventsGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11ehci: trace guest bugsGerd Hoffmann
make qemu_queue_{cancel,reset} return the number of packets released, so the caller can figure whenever there have been active packets even though there shouldn't have been any. Add tracepoint to log this. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11ehci: check for EHCI_ASYNC_FINISHED first in ehci_free_packetGerd Hoffmann
Otherwise we'll see the packet free twice in the trace log even though it actually happens only once. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-09-11ehci: Properly report completed but not yet processed packets to the guestHans de Goede
Reported packets which have completed before being cancelled as such to the host. Note that the new code path this patch adds is untested since it I've been unable to actually trigger the race which needs this code path. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2012-09-11ehci: Properly cleanup packets on cancelHans de Goede
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2012-09-11ehci: Update copyright headers to reflect recent workHans de Goede
Update copyright headers to reflect all the work Gerd and I have been doing on the EHCI emulation. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2012-09-11ehci: Validate qh is not changed unexpectedly by the guestHans de Goede
-combine the qh check with the check for devaddr changes -also ensure that p gets set to NULL when the queue gets cancelled on devaddr change, which was not done properly before this patch Signed-off-by: Hans de Goede <hdegoede@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-22 13:32:15 +0000