aboutsummaryrefslogtreecommitdiff
path: root/hw
AgeCommit message (Collapse)Author
2012-06-04arm_boot: Pass ARMCPU to do_cpu_reset()Andreas Färber
Allows us to use cpu_reset() in place of cpu_state_reset(). Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Peter Maydell <peter.maydell@linaro.org>
2012-06-04armv7m: Pass ARMCPU to armv7m_reset()Andreas Färber
Allows us to use cpu_reset() in place of cpu_state_reset(). Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Peter Maydell <peter.maydell@linaro.org>
2012-06-04armv7m: Use cpu_arm_init() to obtain ARMCPUAndreas Färber
Needed for armv7m_reset(). Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Peter Maydell <peter.maydell@linaro.org>
2012-06-04omap: Use cpu_arm_init() to store ARMCPU in omap_mpu_state_sAndreas Färber
Fix tab indentations of comments, add braces, use cpu_reset(). Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Peter Maydell <peter.maydell@linaro.org>
2012-06-04pxa2xx: Use cpu_arm_init() and store ARMCPUAndreas Färber
Also use cpu_reset() in place of cpu_state_reset(). Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Peter Maydell <peter.maydell@linaro.org>
2012-06-04Revert "rtl8139: do the network/host communication only in normal operating ↵Jason Wang
mode" This reverts commit ff71f2e8cacefae99179993204172bc65e4303df. This is because the linux 8139cp driver would leave the card in "Config Register Write Enable" mode after the eeprom were read or write ( which is unexpected in the spec ). Also a physical 8139 card can still DMA into host memory in modes other than Normal mode, so we need revert this commit to align with the behavior of physical card. The issue of 8139cp driver should be fixed in linux seperately. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-06-03Merge remote-tracking branch 'qemu-kvm/uq/master' into stagingAnthony Liguori
* qemu-kvm/uq/master: virtio/vhost: Add support for KVM in-kernel MSI injection msix: Add msix_nr_vectors_allocated kvm: Enable use of kvm_irqchip_in_kernel in hwlib code kvm: Introduce kvm_irqchip_add/remove_irqfd kvm: Make kvm_irqchip_commit_routes an internal service kvm: Publicize kvm_irqchip_release_virq kvm: Introduce kvm_irqchip_add_msi_route kvm: Rename kvm_irqchip_add_route to kvm_irqchip_add_irq_route msix: Introduce vector notifiers msix: Invoke msix_handle_mask_update on msix_mask_all msix: Factor out msix_get_message kvm: update vmxcap for EPT A/D, INVPCID, RDRAND, VMFUNC kvm: Enable in-kernel irqchip support by default kvm: Add support for direct MSI injections kvm: Update kernel headers kvm: x86: Wire up MSI support for in-kernel irqchip pc: Enable MSI support at APIC level kvm: Introduce basic MSI support for in-kernel irqchips Introduce MSIMessage structure kvm: Refactor KVMState::max_gsi to gsi_count
2012-05-30ahci: SATA FIS is 20 bytes, not 0x20Daniel Verkamp
As in the SATA and AHCI specifications, a FIS is 5 Dwords of 4 bytes each, which comes to 20 bytes (decimal), not 0x20. Signed-off-by: Daniel Verkamp <daniel@drv.nu> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-05-30virtio-blk: Fix geometry sector calculationChristian Borntraeger
Currently the sector value for the geometry is masked, even if the user usesa command line parameter that explicitely gives a number. This breaks dasd devices on s390. A dasd device can have a physical block size of 4096 (== same for logical block size) and a typcial geometry of 15 heads and 12 sectors per cyl. The ibm partition detection relies on a correct geometry reported by the device. Unfortunately the current code changes 12 to 8. This would be necessary if the total size is not a multiple of logical sector size, but for dasd this is not the case. This patch checks the device size and only applies sector mask if necessary. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> CC: Christoph Hellwig <hch@lst.de> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-05-30virtio: Fix compiler warning for non Linux hostsStefan Weil
The local variables ret, i are only used if __linux__ is defined. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-05-29pci: call object_unparent() before free_qdev()Amos Kong
Start VM with 8 multiple-function block devs, hot-removing those block devs by 'device_del ...' would cause qemu abort. | (qemu) device_del virti0-0-0 | (qemu) ** |ERROR:qom/object.c:389:object_delete: assertion failed: (obj->ref == 0) It's a regression introduced by commit 57c9fafe The whole PCI slot should be removed once. Currently only one func is cleaned in pci_unplug_device(), if you try to remove a single func by monitor cmd. free_qdev() are called for all functions in slot, but unparent_delete() is only called for one function. Signed-off-by: XXXX Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-05-29fix multiboot loading if load_end_addr == 0Scott Moser
The previous multiboot load code did not treat the case where load_end_addr was 0 specially. The multiboot specification says the following: * load_end_addr Contains the physical address of the end of the data segment. (load_end_addr - load_addr) specifies how much data to load. This implies that the text and data segments must be consecutive in the OS image; this is true for existing a.out executable formats. If this field is zero, the boot loader assumes that the text and data segments occupy the whole OS image file. Signed-off-by: Scott Moser <smoser@ubuntu.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-05-29vga: fix vram double-mapping with -vga std and -M pc-0.12Avi Kivity
With pc-0.12, we map the video RAM both through the PCI BAR (the guest does this) and through a fixed mapping at 0xe0000000. The memory API doesn't allow this double map, and aborts. Fix by using an alias. Reported-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-05-29Merge remote-tracking branch 'sstabellini/for_1.1_rc3' into stagingAnthony Liguori
* sstabellini/for_1.1_rc3: Call xc_domain_shutdown with the reboot flag when the guest requests a reboot. xen: Fix PV-on-HVM xen_disk: properly update stats in ioreq_release() xen_disk: use bdrv_aio_flush instead of bdrv_flush xen_disk: remove syncwrite option xen: disable rtc_clock xen: do not initialize the interval timer and PCSPK emulator
2012-05-29Merge remote-tracking branch 'kwolf/for-anthony' into stagingAnthony Liguori
* kwolf/for-anthony: fdc-test: introduced qtest no_media_on_start and cmos qtest for floppy fdc: fix media detection fdc: floppy drive should be visible after start without media qemu-iotests: mark 035 qcow2-only qcow2: Check qcow2_alloc_clusters_at() return value sheepdog: use heap instead of stack for BDRVSheepdogState sheepdog: return -errno on error sheepdog: mark image as snapshot when tag is specified qemu-img: Explain how rebase operation can be used to perform a 'diff' operation. qcow2: don't leak buffer for unexpected qcow_version in header
2012-05-25fdc: fix media detectionPavel Hrdina
We have to set up 'media_changed' after guest start so floppy driver could detect that there is no media in drive. For this purpose we call 'fdctrl_change_cb' instead of 'fd_revalidate' in 'fdctrl_connect_drives'. 'fd_revalidate' is called inside 'fdctrl_change_cb'. We still have to set default drive geometry in 'fd_revalidate' even if there is no media in drive. When you try to open (windows) or mount (linux) floppy the driver tries to seek on track 1. Linux guest stuck in loop then kernel crashes and windows guest prints error message. Signed-off-by: Pavel Hrdina <phrdina@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-05-25fdc: floppy drive should be visible after start without mediaPavel Hrdina
If you start guest with floppy drive but without media inserted, guest still should see floppy drive pressent. Signed-off-by: Pavel Hrdina <phrdina@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-05-25scsi: declare vmstate_info_scsi_requests to be staticJim Meyering
Signed-off-by: Jim Meyering <meyering@redhat.com>
2012-05-24es1370: Fix debug codeStefan Weil
When DEBUG_ES1370 is defined, the compiler shows these warnings: hw/es1370.c: In function ?es1370_update_voices?: hw/es1370.c:414: warning: format ?%d? expects type ?int?, but argument 3 has type ?size_t? hw/es1370.c: In function ?es1370_writel?: hw/es1370.c:582: warning: format ?%d? expects type ?int?, but argument 3 has type ?long int? hw/es1370.c:592: warning: format ?%d? expects type ?int?, but argument 3 has type ?long int? hw/es1370.c:609: warning: format ?%d? expects type ?int?, but argument 3 has type ?long int? hw/es1370.c: In function ?es1370_readl?: hw/es1370.c:751: warning: suggest braces around empty body in an ?if? statement Fix the format strings and add the missing braces. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: malc <av1474@comtv.ru>
2012-05-21xen: Fix PV-on-HVMAnthony PERARD
In the context of PV-on-HVM under Xen, the emulated nics are supposed to be unplug before the guest drivers are initialized, when the guest write to a specific IO port. Without this patch, the guest end up with two nics with the same MAC, the emulated nic and the PV nic. Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-05-21qdev: Fix memory leakdunrong huang
The str allocated in visit_type_str was not freed. The visit_type_str function is an input visitor(<QMP/String/etc>-to-native) here, it will allocate memory for caller, so the caller is responsible for freeing the memory. Reviewed-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: dunrong huang <riegamaths@gmail.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-05-21virtio: check virtio_load return codeOrit Wassermann
Otherwise we crash on error. Signed-off-by: Ulrich Obergfell <uobergfe@redhat.com> Signed-off-by: Orit Wassermann <owasserm@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-05-21virtio-blk: always enable VIRTIO_BLK_F_SCSIPaolo Bonzini
VIRTIO_BLK_F_SCSI is supposed to mean whether the host can *parse* SCSI requests, not *execute* them. You could run QEMU with scsi=on and a file-backed disk, and QEMU would fail all SCSI requests even though it advertises VIRTIO_BLK_F_SCSI. Because we need to do this to fix a migration compatibility problem related to how QEMU is invoked by management, we must do this unconditionally even on older machine types. This more or less assumes that no one ever invoked QEMU with scsi=off. Here is how testing goes: - old QEMU, scsi=on -> new QEMU, scsi=on - new QEMU, scsi=on -> old QEMU, scsi=on - old QEMU, scsi=off -> new QEMU, scsi=on - new QEMU, scsi=off -> old QEMU, scsi=on ok (new QEMU has VIRTIO_BLK_F_SCSI, adding host features is fine) - old QEMU, scsi=off -> new QEMU, scsi=off ok (new QEMU has VIRTIO_BLK_F_SCSI, adding host features is fine) - old QEMU, scsi=on -> new QEMU, scsi=off ok, bug fixed - new QEMU, scsi=on -> old QEMU, scsi=off doesn't work (same as: old QEMU, scsi=on -> old QEMU, scsi=off) - new QEMU, scsi=off -> old QEMU, scsi=off broken by the patch Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-05-21virtio-blk: define VirtIOBlkConfPaolo Bonzini
We will have to add another field to the virtio-blk configuration in the next patch. Avoid a proliferation of arguments to virtio_blk_init. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-05-21virtio-blk: blockdev_mark_auto_del is transport-independentPaolo Bonzini
Move it from virtio_blk_exit_pci to virtio_blk_exit. This is included here because the next patch removes proxy->block. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-05-21virtio-blk: report non-zero status when failing SG_IO requestsPaolo Bonzini
Linux really looks only at scsi->errors for SG_IO requests; it does not look at the virtio request status at all. Because of this, when a SG_IO request is failed early with virtio_blk_req_complete(req, VIRTIO_BLK_S_UNSUPP), without writing hdr.status, it will look like a success to the guest. This is their bug, but we can make it safe for older guests now by forcing scsi->errors to have a non-zero value whenever a request has to be failed. But if we fix the bug in the guest driver, we will have another problem because QEMU returns VIRTIO_BLK_S_IOERR if the status is non-zero, and Linux translates that to -EIO. Rather, the guest should succeed the request and pass the non-zero status via the userspace-provided SG_IO structure. So, remove the case where virtio_blk_handle_scsi can return VIRTIO_BLK_S_IOERR. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-05-21use an uint64_t for the max_sz parameter in load_image_targphysMark Langsdorf
Allow load_image_targphys to load files on systems with more than 2G of emulated memory by changing the max_sz parameter from an int to an uint64_t. Reviewed-by: Andreas F=E4rber <afaerber@suse.de> Acked-by: Alexander Graf <agraf@suse.de> Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-05-21virtio/vhost: Add support for KVM in-kernel MSI injectionJan Kiszka
Make use of the new vector notifier to track changes of the MSI-X configuration of virtio PCI devices. On enabling events, we establish the required virtual IRQ to MSI-X message route and link the signaling eventfd file descriptor to this vIRQ line. That way, vhost-generated interrupts can be directly delivered to an in-kernel MSI-X consumer like the x86 APIC. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-05-21msix: Add msix_nr_vectors_allocatedJan Kiszka
Analogously to msi_nr_vectors_allocated, add a service for MSI-X. Will be used by the virtio-pci layer. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-05-21kvm: Make kvm_irqchip_commit_routes an internal serviceJan Kiszka
Automatically commit route changes after kvm_add_routing_entry and kvm_irqchip_release_virq. There is no performance relevant use case for which collecting multiple route changes is beneficial. This makes kvm_irqchip_commit_routes an internal service which assert()s that the corresponding IOCTL will always succeed. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-05-21kvm: Rename kvm_irqchip_add_route to kvm_irqchip_add_irq_routeJan Kiszka
We will add kvm_irqchip_add_msi_route, so let's make the difference clearer. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-05-21msix: Introduce vector notifiersJan Kiszka
Vector notifiers shall be triggered by the MSI/MSI-X core whenever a relevant configuration change is programmed by the guest. In case of MSI-X, changes are reported when the effective mask (global && per-vector) alters its state. On unmask, the current vector configuration is included in the event report. This allows users - e.g. virtio-pci layer - to transfer this information to external MSI-X routing subsystems - like vhost + KVM in-kernel irqchip. This implementation only provides MSI-X support, but extension to MSI is feasible and will be provided later on when adding support for KVM PCI device assignment. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-05-21msix: Invoke msix_handle_mask_update on msix_mask_allJan Kiszka
In preparation of firing vector notifiers on mask changes, call msix_handle_mask_update also from msix_mask_all. So far, this will have no real effect. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-05-21msix: Factor out msix_get_messageJan Kiszka
This helper will also be used by the upcoming config notifier. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2012-05-19virtio-pci: add missing 'static'Blue Swirl
There are no outside references to virtio_portio. Add missing 'static' specifier. Reviewed-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-05-19sparc64: fix initrd loadingBlue Swirl
Initrd load address is too low, it conflicts with kernel load address: rom: requested regions overlap (rom phdr #0: /tmp/vmlinux-debian-6.0.4-sparc64. free=0x0000000000742519, addr=0x0000000000400000) rom loading failed Fix by making the initrd address variable, load initrd after kernel image. Use 64 bit variables instead of longs or 32 bit types. Tested-by: Artyom Tarasenko <atar4qemu@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-05-17Call xc_domain_shutdown with the reboot flag when the guest requests a reboot.John V. Baboval
Signed-off-by: John V. Baboval <john.baboval@virtualcomputer.com> Signed-off-by: Tom Goetz <tom.goetz@virtualcomputer.com> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2012-05-17xen: Fix PV-on-HVMAnthony PERARD
In the context of PV-on-HVM under Xen, the emulated nics are supposed to be unplug before the guest drivers are initialized, when the guest write to a specific IO port. Without this patch, the guest end up with two nics with the same MAC, the emulated nic and the PV nic. Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com>
2012-05-17xen_disk: properly update stats in ioreq_release()Jan Beulich
While for the "normal" case (called from blk_send_response_all()) decrementing requests_finished is correct, doing so in the parse error case is wrong; requests_inflight needs to be decremented instead. Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com>
2012-05-17xen_disk: use bdrv_aio_flush instead of bdrv_flushStefano Stabellini
Use bdrv_aio_flush instead of bdrv_flush. Make sure to call bdrv_aio_writev/readv after the presync bdrv_aio_flush is fully completed and make sure to call the postsync bdrv_aio_flush after bdrv_aio_writev/readv is fully completed. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2012-05-17xen_disk: remove syncwrite optionStefano Stabellini
This patch removes a dead option. The same can be achieved removing BDRV_O_NOCACHE and BDRV_O_CACHE_WB from the flags passed to bdrv_open. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2012-05-17xen: do not initialize the interval timer and PCSPK emulatorStefano Stabellini
PIT and PCSPK are emulated by the hypervisor so we don't need to emulate them in Qemu: this patch prevents Qemu from waking up needlessly at PIT_FREQ on Xen. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2012-05-16kvm: x86: Wire up MSI support for in-kernel irqchipJan Kiszka
Catch writes to the MSI MMIO region in the KVM APIC and forward them to the kernel. Provide the kernel support GSI routing, this allows to enable MSI support also for in-kernel irqchip mode. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-05-16pc: Enable MSI support at APIC levelJan Kiszka
Push msi_supported enabling to the APIC implementations where we can encapsulate the decision more cleanly, hiding the details from the generic code. Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-05-16Introduce MSIMessage structureJan Kiszka
Will be used for generating and distributing MSI messages, both in emulation mode and under KVM. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-05-14Merge remote-tracking branch 'afaerber-or/qom-1.1' into stagingAnthony Liguori
* afaerber-or/qom-1.1: mips_fulong2e: Don't register "cpu" VMState twice pc: Add back PCI.rombar compat property qdev: Fix adding of ptr properties qdev: Use object_property_print() in info qtree target-i386: Defer MCE init qom: Documentation addition for object_class_by_name() target-mips: Remove commented-out function declaration
2012-05-14Merge remote-tracking branch 'kraxel/usb.50' into stagingAnthony Liguori
* kraxel/usb.50: usb-host: handle guest-issued clear halt
2012-05-14Merge remote-tracking branch 'spice/spice.v55' into stagingAnthony Liguori
* spice/spice.v55: qxl: set size of PCI IO BAR correctly (16) for revision 2
2012-05-14Merge remote-tracking branch 'sweil/for-1.1' into stagingAnthony Liguori
* sweil/for-1.1: qemu-doc: Use QEMU instead of qemu for product name qemu-doc: Fix executable name in examples qemu-doc: Add missing parameter in description of -D option configure: Use QEMU instead of Qemu fix some common typos qemu-timer: Fix wrong error message
2012-05-14qdev: fix -device foo,?Paolo Bonzini
Since most property types do not have a parse property now, this was broken. Fix it by looking at the setter instead. Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Acked-by: Andreas F=E4rber <afaerber@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-25 22:12:59 +0000