| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
It needs to be a qdev property, because it belongs to the drive's
guest part. Precedence: commit a0fef654 and 6ced55a5.
Bonus: info qtree now shows the serial number.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Correct a number of minor errors in the OHCI wakeup implementation:
* when the port is suspended but the controller is not, raise RHSC
* when the controller is suspended but the port is not, raise RD
* when the controller is suspended, move it to resume state
These fix some edge cases where a USB device might not successfully get
the attention of the guest OS if it tried to do so at the wrong time.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
This is used to indicate at which speed[s] the device can operate,
so that this can be checked to match the ports capabilities when it gets
attached to a bus.
Note that currently all usb1 emulated device claim to be fullspeed, this
seems to not cause any problems, but still seems wrong, because with real
hardware keyboards, mice and tablets usually are lo-speed, so reporting these
as fullspeed devices seems wrong.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Make ehci use nanoseconds everywhere.
Simplifies time calculations.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Add properties for the wakeup rate and the max number of frames ehci
will process at once.
The wakeup rate defaults to 1000 which equals the usb frame rate. This
can be reduced to make qemu wake up less often when ehci is active.
In case the wakeup rate is reduced or the ehci timer is delayed due to
latency issues elsewhere in qemu ehci will process multiple frames at
once. The maxframes property specifies the upper limit for this.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Diagnose the case where the user asked for a NIC via "-net nic"
but the board didn't instantiate that NIC (for example where the
user asked for two NICs but the board only supports one). Note
that this diagnostic doesn't apply to NICs created through -device,
because those are always instantiated.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
When running kvm-autotest, fputc() is often the second highest (sometimes #1)
function showing up in a profile. This is due to fputc() locking the file
for every byte written.
Optimize by buffering a line's worth of pixels and writing that out in a
single call.
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
|
|
Conflicts:
hw/usb-uhci.c
|
|
|
|
The kvm_para.h header is now always available.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
|
|
This warning is new in gcc 4.6.
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
|
|
Introduce a new emulated PCI device, specific to fully virtualized Xen
guests. The device is necessary for PV on HVM drivers to work.
Signed-off-by: Steven Smith <ssmith@xensource.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Compared to the last version I only added a comment to the code.
- remove i440FX-xen and i440fx_write_config_xen
we don't need to intercept pci config writes to i440FX anymore;
- introduce PIIX3-xen and piix3_write_config_xen
we do need to intercept pci config write to the PCI-ISA bridge to update
the PCI link routing;
- set the number of PIIX3-xen interrupts line to 128;
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
If the cirrus_vga PCI BAR is unmapped than we should not only reset
map_addr but also lfb_addr, otherwise we'll keep trying to map
the old lfb_addr in map_linear_vram.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
This function will be used to support sync dirty bitmap.
This come with a check against every Xen release, and special
implementation for Xen version that doesn't have this specific call.
This function will not be usable with Xen 3.3 because the behavior is
different.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Until now, we've created a union over multiple different TLB types and
allocated that union. While it's a waste of memory (and cache) to allocate
TLB information for a TLB type with much information when you only need
little, it also inflicts another issue.
With the new KVM API, we can now share the TLB between KVM and qemu, but
for that to work we need to have both be in the same layout. We can't just
stretch it over to fit some internal different TLB representation.
Hence this patch moves all TLB types to their own array, allowing us to only
address and allocate exactly the boundaries required for the specific TLB
type at hand.
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
We have some KVM interaction code in Qemu that tries to be clever and
ignore some capabilities when running on BookE style MMUs. Unfortunately,
the default CPU bamboo was defaulting to was not a BookE-style MMU,
resulting in the check to fail.
With this patch, guests can run again on 440 with -enable-kvm.
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
The natural format for e500 cores to do TLB manipulation with are the MAS
registers. Instead of converting them into some internal representation
and back again when the guest reads them, we can just keep the data
identical to the way the guest passed it to us.
The main advantage of this approach is that we're getting closer to being
able to share MMU data with KVM using shared memory, so that we don't need
to copy lots of MMU data back and forth all the time. For this to work
however, another patch is required that gets rid of the TLB union, as that
destroys our memory layout that needs to be identical with the kernel one.
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
When running a PPC guest with KVM that can do PV operations, we need
to indicate the guest which instructions to use for a hypercall and
that it is running as KVM guest.
This logic was available on openbios based machines already. This patch
also adds said functionality to the mpc8544ds machine.
Signed-off-by: Alexander Graf <agraf@suse.de>
Acked-by: Scott Wood <scottwood@freescale.com>
|
|
During testing, I was generating a vmlinux binary that easily occupied
more than 20MB of RAM. Since the current -kernel code loads the initrd
at a fixed address behind the kernel, we were overwriting kernel data
when the kernel got too big.
To finally get rid of the issue, let's calculate the initrd and cmdline
addresses relative to the kernel size, so we can have kernels and initrds
that are as big as they want to - as long as they fit in RAM.
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
When Linux reboots an e500 VM, it writes to a magic register in the
"global-utilities" device indicated by the device tree. We were not
emulating that device so far, rendering the VM reboot-less.
This patch implements that device with only the reboot functionality
implemented and adds it to the device tree. With this patch applied,
I can successfully reboot a -M mpc8544ds VM.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Andreas Färber <andreas.faerber@web.de>
|
|
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
|
|
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
As pci id initialization is moved to common layer,
some initialization function can be empty.
So don't call init method if NULL.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Conflicts:
hw/virtio-pci.c
|
|
The 9118 ethernet controller interrupt line is active low unless
the IRQ config register is programmed to set both the IRQ_POL
(polarity: active-high) and IRQ_TYPE (type: push-pull) bits:
implement support for inverting the irq output in other configurations.
This also requires that we support setting the bits in the first
place, and that we correctly preserve them across software reset.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
|
|
Register the smc91c111 reset function as a qdev reset function.
Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
|
|
|
|
Clearing the error status flag was missing for restarting flushes. Now that the
error status is separate from the BM status register, we can simply set it to 0
after restarting the request. This ensures that we never forget to clear a bit.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Add support for TRIM sub function of the data set management command,
and wire it up to the qemu discard infrastructure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Replace the is_read flag with a dma_cmd flag to allow the dma and
restart logic to handler other commands like TRIM.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
When a failed PIO request caused the VM to stop, we still need to transfer the
PIO state even though DRQ=0 at this point.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
When adding the werror=stop mode, some flags were added to s->status
which are used to determine what kind of operation should be restarted
when the VM is continued.
Unfortunately, it turns out that s->status is in fact a device register
and as such is visible to the guest (some of the abused bits are even
writable for the guest).
For migration we keep on using the old VMState field (renamed to
migration_compat_status) if the status register doesn't use any of the
previously abused bits. If it does, we use a subsection with a clean copy of
the status register.
The error status is always sent in a subsection if there is any error. It can't
use the old field because errors happen even without PCI.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
ccid_initfn() allocates CCIDBus dynamically, but there is no exit
callback to free it.
Fix by getting rid of the allocation.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
When qemu gets compiled without support of vhost-net, any attempt
to use it fails with a very clear error message:
qemu-system-x86_64: -netdev ...,vhost=on: vhost-net requested but could not be initialized
there's absolutely no reason given _why_ it coult not be
initialized, and even strace'ing the process in question
does not reveal any errors. So print a message telling
what's going on.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Disable event index for compat machine types.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
expire_time must be initialited when the guest activates the
usb scheduler, not at device creation time.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Implement the wakeup callback in the OHCI USBPortOps, so that when
a downstream device wakes up it correctly causes the OHCI controller
to come out of suspend.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
HcPeriodCurrentED is read-only, but Linux writes to it anyway; silently
ignore this rather than printing a warning message.
(Specifically, drivers/usb/host/ohci-hub.c:ohci_rh_resume() writes a
0, in at least kernels 2.6.25 through 2.6.39.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Signed-off-by: Brad Hards <bradh@frogmouth.net>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Signed-off-by: Brad Hards <bradh@frogmouth.net>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Signed-off-by: Brad Hards <bradh@frogmouth.net>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
