| Age | Commit message (Collapse) | Author |
|---|
|
into staging
virtio,pc,pci: fixes, features, cleanups
asymmetric crypto support for cryptodev-vhost-user
rom migration when rom size changes
poison get, inject, clear; mock cxl events and irq support for cxl
shadow virtqueue offload support for vhost-vdpa
vdpa now maps shadow vrings with MAP_SHARED
max_cpus went up to 1024 and we default to smbios 3.0 for pc
Fixes, cleanups all over the place. In particular
hw/acpi: Fix PM control register access
works around a very long standing bug in memory core.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmSZl5EPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRph+8H/RZodqCadmQ1evpeWs7RBSvJeZgbJTVl/9/h
# +ObvEmVz2+X4D+O1Kxh54vDV0SNVq3XjyrFy3Ur57MAR6r2ZWwB6HySaeFdi4zIm
# N0SMkfUylDnf7ulyjzJoXDzHOoFnqAM6fU/jcoQXBIdUeeqwPrzLOZHrGrwevPWK
# iH5JP66suOVlBuKLJjlUKI3/4vK3oTod5Xa3Oz2Cw1oODtbIa97N8ZAdBgZd3ah9
# 7mjZjcH54kFRwfidz/rkpY5NMru8BlD54MyEOWofvTL2w7aoWmVO99qHEK+SjLkG
# x4Mx3aYlnOEvkJ+5yBHvtXS4Gc5T9ltY84AvcwPNuz4RKCORi1s=
# =Do8p
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 26 Jun 2023 03:50:09 PM CEST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [undefined]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (53 commits)
vhost-vdpa: do not cleanup the vdpa/vhost-net structures if peer nic is present
vhost_net: add an assertion for TAP client backends
intel_iommu: Fix address space unmap
intel_iommu: Fix flag check in replay
intel_iommu: Fix a potential issue in VFIO dirty page sync
vhost-user: fully use new backend/frontend naming
virtio-scsi: avoid dangling host notifier in ->ioeventfd_stop()
hw/i386/pc: Clean up pc_machine_initfn
vdpa: fix not using CVQ buffer in case of error
vdpa: mask _F_CTRL_GUEST_OFFLOADS for vhost vdpa devices
vhost: fix vhost_dev_enable_notifiers() error case
vdpa: Allow VIRTIO_NET_F_CTRL_GUEST_OFFLOADS in SVQ
vdpa: Add vhost_vdpa_net_load_offloads()
virtio-net: expose virtio_net_supported_guest_offloads()
hw/net/virtio-net: make some VirtIONet const
vdpa: reuse virtio_vdev_has_feature()
include/hw/virtio: make some VirtIODevice const
vdpa: map shadow vrings with MAP_SHARED
vdpa: reorder vhost_vdpa_net_cvq_cmd_page_len function
vdpa: do not block migration if device has cvq and x-svq=on
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
An assertion was missing for tap vhost backends that enforces a non-null
reference from get_vhost_net(). Both vhost-net-user and vhost-net-vdpa
enforces this. Enforce the same for tap. Unit tests pass with this change.
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Message-Id: <20230619041501.111655-1-anisinha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
|
|
During address space unmap, corresponding IOVA tree entries are
also removed. But DMAMap is set beyond notifier's scope by 1, so
in theory there is possibility to remove a continuous entry above
the notifier's scope but falling in adjacent notifier's scope.
There is no issue currently as no use cases allocate notifiers
continuously, but let's be robust.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20230615032626.314476-4-zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Replay doesn't notify registered notifiers but the one passed
to it. So it's meaningless to check the registered notifier's
synthetic flag.
There is no issue currently as all replay use cases have MAP
flag set, but let's be robust.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20230615032626.314476-3-zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Peter Xu found a potential issue:
"The other thing is when I am looking at the new code I found that we
actually extended the replay() to be used also in dirty tracking of vfio,
in vfio_sync_dirty_bitmap(). For that maybe it's already broken if
unmap_all() because afaiu log_sync() can be called in migration thread
anytime during DMA so I think it means the device is prone to DMA with the
IOMMU pgtable quickly erased and rebuilt here, which means the DMA could
fail unexpectedly. Copy Alex, Kirti and Neo."
Fix it by replacing the unmap_all() to only evacuate the iova tree
(keeping all host mappings untouched, IOW, don't notify UNMAP), and
do a full resync in page walk which will notify all existing mappings
as MAP. This way we don't interrupt with any existing mapping if there
is (e.g. for the dirty sync case), meanwhile we keep sync too to latest
(for moving a vfio device into an existing iommu group).
Suggested-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20230615032626.314476-2-zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Slave/master nomenclature was replaced with backend/frontend in commit
1fc19b65279a ("vhost-user: Adopt new backend naming")
This patch replaces all remaining uses of master and slave in the
codebase.
Signed-off-by: Emmanouil Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-Id: <20230613080849.2115347-1-manos.pitsidianakis@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
|
|
virtio_scsi_dataplane_stop() calls blk_drain_all(), which invokes
->drained_begin()/->drained_end() after we've already detached the host
notifier. virtio_scsi_drained_end() currently attaches the host notifier
again and leaves it dangling after dataplane has stopped.
This results in the following assertion failure because
virtio_scsi_defer_to_dataplane() is called from the IOThread instead of
the main loop thread:
qemu-system-x86_64: ../softmmu/memory.c:1111: memory_region_transaction_commit: Assertion `qemu_mutex_iothread_locked()' failed.
Buglink: https://gitlab.com/qemu-project/qemu/-/issues/1680
Reported-by: Jean-Louis Dupond <jean-louis@dupond.be>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230611193924.2444914-1-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
To use the newly introduced PC machine class local variable.
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <20230609164107.23404-1-suravee.suthikulpanit@amd.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
in vhost_dev_enable_notifiers(), if virtio_bus_set_host_notifier(true)
fails, we call vhost_dev_disable_notifiers() that executes
virtio_bus_set_host_notifier(false) on all queues, even on queues that
have failed to be initialized.
This triggers a core dump in memory_region_del_eventfd():
virtio_bus_set_host_notifier: unable to init event notifier: Too many open files (-24)
vhost VQ 1 notifier binding failed: 24
.../softmmu/memory.c:2611: memory_region_del_eventfd: Assertion `i != mr->ioeventfd_nb' failed.
Fix the problem by providing to vhost_dev_disable_notifiers() the
number of queues to disable.
Fixes: 8771589b6f81 ("vhost: simplify vhost_dev_enable_notifiers")
Cc: longpeng2@huawei.com
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20230602162735.3670785-1-lvivier@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
To support restoring offloads state in vdpa, it is necessary to
expose the function virtio_net_supported_guest_offloads().
According to VirtIO standard, "Upon feature negotiation
corresponding offload gets enabled to preserve backward compatibility.".
Therefore, QEMU uses this function to get the device supported offloads.
This allows QEMU to know the device's defaults and skip the control
message sending if these defaults align with the driver's configuration.
Note that the device's defaults can mismatch the driver's configuration
only at live migration.
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Message-Id: <43679506f3f039a7aa2bdd5b49785107b5dfd7d4.1685704856.git.yin31149@gmail.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Tested-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The VirtIONet structure is not modified in
virtio_net_supported_guest_offloads().
Therefore, make it const to allow this function to
accept const variables.
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <489b09c3998ac09b9135e57a7dd8c56a4be8cdf9.1685704856.git.yin31149@gmail.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Tested-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The vdpa devices that use va addresses neeeds these maps shared.
Otherwise, vhost_vdpa checks will refuse to accept the maps.
The mmap call will always return a page aligned address, so removing the
qemu_memalign call. Keeping the ROUND_UP for the size as we still need
to DMA-map them in full.
Not applying fixes tag as it never worked with va devices.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20230602143854.1879091-4-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Since KVM_MAX_VCPUS is currently defined to 1024 for x86 as shown in
arch/x86/include/asm/kvm_host.h, update QEMU limits to the same number.
In case KVM could not support the specified number of vcpus, QEMU would
return the following error message:
qemu-system-x86_64: kvm_init_vcpu: kvm_get_vcpu failed (xxx): Invalid argument
Also, keep max_cpus at 288 for machine version 8.0 and older.
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Daniel P. Berrangé <berrange@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Julia Suvorova <jusual@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <20230607205717.737749-3-suravee.suthikulpanit@amd.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
|
|
Currently, pc-q35 and pc-i44fx machine models are default to use SMBIOS 2.8
(32-bit entry point). Since SMBIOS 3.0 (64-bit entry point) is now fully
supported since QEMU 7.0, default to use SMBIOS 3.0 for newer machine
models. This is necessary to avoid the following message when launching
a VM with large number of vcpus.
"SMBIOS 2.1 table length 66822 exceeds 65535"
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <20230607205717.737749-2-suravee.suthikulpanit@amd.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
|
|
On pegasos2 which has ACPI as part of VT8231 south bridge the board
firmware writes PM control register by accessing the second byte so
addr will be 1. This wasn't handled correctly and the write went to
addr 0 instead. Remove the acpi_pm1_cnt_write() function which is used
only once and does not take addr into account and handle non-zero
address in acpi_pm_cnt_{read|write}. This fixes ACPI shutdown with
pegasos2 firmware.
The issue below is possibly related to the same memory core bug.
Link: https://gitlab.com/qemu-project/qemu/-/issues/360
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <20230607200125.A9988746377@zero.eik.bme.hu>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
* kvm: reuse per-vcpu stats fd to avoid vcpu interruption
* Validate cluster and NUMA node boundary on ARM and RISC-V
* various small TCG features from newer processors
* Remove dubious 'event_notifier-posix.c' include
* fix git-submodule.sh in releases
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmSZS0IUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroN+tgf/axJdG9NXKCyXgc0vzjKVhSR4Y+tC
# EPxkg7Rq7uOMgbph9oTS/2Kzh9LnP6kLt2qnS4igRHGuEBd58yD6fFNDv0LJsK/l
# B/d0WGHMKV0KMYOX24rkyfohVu37GhVRsiVSIlIiQVTC9JtYer7WxdnyoDaPKvY8
# dpbKgDrd59vAlsHrpj7ZubVQPcL3lXrLryimpDohMH6Ba+4wZq+7dKPpal97QOP2
# 3i7isUBTQiMOcVjW6GEiNcDLSJqj5DSgylhdFnaBsq/ThpC2PxWoXcCbV28QELzf
# 5+J+RXQavmeWKZMR0q98iBzWbrsVtaSxAkHHiwbUMMqQvkfY6Dpo5dMHWw==
# =WHE2
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 26 Jun 2023 10:24:34 AM CEST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [undefined]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu:
git-submodule.sh: allow running in validate mode without previous update
target/i386: implement SYSCALL/SYSRET in 32-bit emulators
target/i386: implement RDPID in TCG
target/i386: sysret and sysexit are privileged
target/i386: AMD only supports SYSENTER/SYSEXIT in 32-bit mode
target/i386: Intel only supports SYSCALL/SYSRET in long mode
target/i386: TCG supports WBNOINVD
target/i386: TCG supports XSAVEERPTR
target/i386: do not accept RDSEED if CPUID bit absent
target/i386: TCG supports RDSEED
target/i386: TCG supports 3DNow! prefetch(w)
target/i386: fix INVD vmexit
kvm: reuse per-vcpu stats fd to avoid vcpu interruption
hw/riscv: Validate cluster and NUMA node boundary
hw/arm: Validate cluster and NUMA node boundary
numa: Validate cluster and NUMA node boundary if required
hw/remote/proxy: Remove dubious 'event_notifier-posix.c' include
build: further refine build.ninja rules
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
There are two RISCV machines where NUMA is aware: 'virt' and 'spike'.
Both of them are required to follow cluster-NUMA-node boundary. To
enable the validation to warn about the irregular configuration where
multiple CPUs in one cluster has been associated with multiple NUMA
nodes.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230509002739.18388-4-gshan@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
There are two ARM machines where NUMA is aware: 'virt' and 'sbsa-ref'.
Both of them are required to follow cluster-NUMA-node boundary. To
enable the validation to warn about the irregular configuration where
multiple CPUs in one cluster have been associated with different NUMA
nodes.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230509002739.18388-3-gshan@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
For some architectures like ARM64, multiple CPUs in one cluster can be
associated with different NUMA nodes, which is irregular configuration
because we shouldn't have this in baremetal environment. The irregular
configuration causes Linux guest to misbehave, as the following warning
messages indicate.
-smp 6,maxcpus=6,sockets=2,clusters=1,cores=3,threads=1 \
-numa node,nodeid=0,cpus=0-1,memdev=ram0 \
-numa node,nodeid=1,cpus=2-3,memdev=ram1 \
-numa node,nodeid=2,cpus=4-5,memdev=ram2 \
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1 at kernel/sched/topology.c:2271 build_sched_domains+0x284/0x910
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.14.0-268.el9.aarch64 #1
pstate: 00400005 (nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : build_sched_domains+0x284/0x910
lr : build_sched_domains+0x184/0x910
sp : ffff80000804bd50
x29: ffff80000804bd50 x28: 0000000000000002 x27: 0000000000000000
x26: ffff800009cf9a80 x25: 0000000000000000 x24: ffff800009cbf840
x23: ffff000080325000 x22: ffff0000005df800 x21: ffff80000a4ce508
x20: 0000000000000000 x19: ffff000080324440 x18: 0000000000000014
x17: 00000000388925c0 x16: 000000005386a066 x15: 000000009c10cc2e
x14: 00000000000001c0 x13: 0000000000000001 x12: ffff00007fffb1a0
x11: ffff00007fffb180 x10: ffff80000a4ce508 x9 : 0000000000000041
x8 : ffff80000a4ce500 x7 : ffff80000a4cf920 x6 : 0000000000000001
x5 : 0000000000000001 x4 : 0000000000000007 x3 : 0000000000000002
x2 : 0000000000001000 x1 : ffff80000a4cf928 x0 : 0000000000000001
Call trace:
build_sched_domains+0x284/0x910
sched_init_domains+0xac/0xe0
sched_init_smp+0x48/0xc8
kernel_init_freeable+0x140/0x1ac
kernel_init+0x28/0x140
ret_from_fork+0x10/0x20
Improve the situation to warn when multiple CPUs in one cluster have
been associated with different NUMA nodes. However, one NUMA node is
allowed to be associated with different clusters.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Acked-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230509002739.18388-2-gshan@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
event_notifier-posix.c is registered in meson's util_ss[] source
set, which is built as libqemuutil.a.p library. Both tools and
system emulation binaries are linked with qemuutil, so there is
no point in including this source file.
Introduced in commit bd36adb8df ("multi-process: create IOHUB
object to handle irq").
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230606134913.93724-1-philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Accessing the TIMA from some specific ring/offset combination can
trigger a special operation, with or without side effects. It is
implemented in qemu with an array of special operations to compare
accesses against. Since the presenter on P10 is pretty similar to P9,
we had the full array defined for P9 and we just had a special case
for P10 to treat one access differently. With a recent change,
6f2cbd133d4 ("pnv/xive2: Handle TIMA access through all ports"), we
now ignore some of the bits of the TIMA address, but that patch
managed to botch the detection of the special case for P10.
To clean that up, this patch introduces a full array of special ops to
be used for P10. The code to detect a special access is common with
P9, only the array of operations differs. The presenter can pick the
correct array of special ops based on its configuration introduced in
a previous patch.
Fixes: Coverity CID 1512997, 1512998
Fixes: 6f2cbd133d4 ("pnv/xive2: Handle TIMA access through all ports")
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
|
|
The presenters for xive on P9 and P10 are mostly similar but the
behavior can be tuned through a few CQ registers. This patch adds a
"get_config" method, which will allow to access that config from the
presenter in a later patch.
For now, just define the config for the TIMA version.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
|
|
PPC TCG supports SMT CPU configurations for non-hypervisor state, so
permit POWER8-10 pseries machines to enable SMT.
This requires PIR and TIR be set, because that's how sibling thread
matching is done by TCG.
spapr's nested-HV capability does not currently coexist with SMT, so
that combination is prohibited (interestingly somewhat analogous to
LPAR-per-core mode on real hardware which also does not support KVM).
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[ clg: Also test smp_threads when checking for POWER8 CPU and above ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
|
|
Although the PPC target only supports the TCG and KVM
accelerators, QEMU supports more. We can not assume that
'!kvm == tcg', so test for the correct accelerator. This
also eases code review, because here we don't care about
KVM, we really want to test for TCG.
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[np: Fix changelog typo noticed by Zoltan]
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
|
|
Doorbells in SMT need to coordinate msgsnd/msgclr and DPDES access from
multiple threads that affect the same state.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
|
|
Create spapr_nested.c for most of the nested HV implementation.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
|
|
Arguably this is just shuffling around register accesses, but one nice
thing it does is allow the exit to save away the L2 state then switch
the environment to the L1 before copying L2 data back to the L1, which
logically flows more naturally and simplifies the error paths.
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
|
|
Rather than use a copy of CPUPPCState to store the host state while
the environment has been switched to the L2, use a new struct for
this purpose.
Have helper functions to save and load this host state.
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
|
|
Fix missing env->ca restore when going from L2 back to the host.
Fixes: 120f738a467 ("spapr: implement nested-hv capability for the virtual hypervisor")
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
|
|
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
|
|
The 'bamboo' machine was used as a KVM platform in the early days (~2008).
It clearly doesn't support it anymore.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
|
|
The 'prep' machine never supported KVM. This piece of code was
probably inherited from another model.
Cc: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
|
|
The phb error macros add a newline for you, so remove the second one to
avoid double whitespace.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
|
|
https://github.com/hdeller/qemu-hppa into staging
target/hppa: Fix boot and reboot for SMP machines
Fix some SMP-related boot and reboot issues with HP-UX and Linux by
correctly initializing the CPU PSW bits, disabling data and instruction
translations and unhalting the CPU in the qemu hppa_machine_reset()
function.
To work correctly some fixes are needed in the SeaBIOS-hppa firmware too,
which is why this series updates it to version 8 which includes those
fixes and enhancements:
Fixes
- boot of HP-UX with SMP, and
- reboot of Linux and HP-UX with SMP
Enhancements:
- show qemu version in boot menu
- adds exit menu entry in boot menu to quit emulation
- allow to trace PCD_CHASSIS codes more specifically
Signed-off-by: Helge Deller <deller@gmx.de>
# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZJbYWAAKCRD3ErUQojoP
# X6ExAQCmOXqwJw3SjSE/+hvphJ2mMTJe3i6dU3AWOGlACxxVzAEA7dKSU4d8EtRj
# NZpGKB9NE9eWwQFGJVbVgFeikap44gs=
# =8zCK
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 24 Jun 2023 01:49:44 PM CEST
# gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg: aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603
# Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F
* tag 'hppa-boot-reboot-fixes-pull-request' of https://github.com/hdeller/qemu-hppa:
target/hppa: Update to SeaBIOS-hppa version 8
target/hppa: Provide qemu version via fw_cfg to firmware
target/hppa: Fix OS reboot issues
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Give current QEMU version string to SeaBIOS-hppa via fw_cfg interface so
that the firmware can show the QEMU version in the boot menu info.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
When the OS triggers a reboot, the reset helper function sends a
qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET) together with an
EXCP_HLT exception to halt the CPUs.
So, at reboot when initializing the CPUs again, make sure to set all
instruction pointers to the firmware entry point, disable any interrupts,
disable data and instruction translations, enable PSW_Q bit and tell qemu
to unhalt (halted=0) the CPUs again.
This fixes the various reboot issues which were seen when rebooting a
Linux VM, including the case where even the monarch CPU has been virtually
halted from the OS (e.g. via "chcpu -d 0" inside the Linux VM).
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Create ITS as part of SBSA platform GIC initialization.
GIC ITS information is in DeviceTree so TF-A can pass it to EDK2.
Bumping platform version to 0.2 as this is important hardware change.
Signed-off-by: Shashi Mallela <shashi.mallela@linaro.org>
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Message-id: 20230619170913.517373-2-marcin.juszkiewicz@linaro.org
Co-authored-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Let's separate plug and unplug handling to prepare for future changes
and make the code a bit easier to read -- working on block states
(plugged/unplugged) instead of on a bitmap.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Gavin Shan <gshan@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230523183036.517957-1-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
On incoming migration we have the following sequence to load option
ROM:
1. On device realize we do normal load ROM from the file
2. Than, on incoming migration we rewrite ROM from the incoming RAM
block. If sizes mismatch we fail, like this:
Size mismatch: 0000:00:03.0/virtio-net-pci.rom: 0x40000 != 0x80000: Invalid argument
This is not ideal when we migrate to updated distribution: we have to
keep old ROM files in new distribution and be careful around romfile
property to load correct ROM file. Which is loaded actually just to
allocate the ROM with correct length.
Note, that romsize property doesn't really help: if we try to specify
it when default romfile is larger, it fails with something like:
romfile "efi-virtio.rom" (160768 bytes) is too large for ROM size 65536
Let's just ignore ROM file when romsize is specified and we are in
incoming migration state. In other words, we need only to preallocate
ROM of specified size, local ROM file is unrelated.
This way:
If romsize was specified on source, we just use same commandline as on
source, and migration will work independently of local ROM files on
target.
If romsize was not specified on source (and we have mismatching local
ROM file on target host), we have to specify romsize on target to match
source romsize. romfile parameter may be kept same as on source or may
be dropped, the file is not loaded anyway.
As a bonus we avoid extra reading from ROM file on target.
Note: when we don't have romsize parameter on source command line and
need it for target, it may be calculated as aligned up to power of two
size of ROM file on source (if we know, which file is it) or,
alternatively it may be retrieved from source QEMU by QMP qom-get
command, like
{ "execute": "qom-get",
"arguments": {
"path": "/machine/peripheral/CARD_ID/virtio-net-pci.rom[0]",
"property": "size" } }
Note: we have extra initialization of size variable to zero in
pci_add_option_rom to avoid false-positive
"error: ‘size’ may be used uninitialized"
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230522201740.88960-2-vsementsov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
vhost_dev_start function does not release virtqueue objects when
event_notifier_init() function fails. Release virtqueue objects
and log a message about function failure.
Signed-off-by: Prasad Pandit <pjp@fedoraproject.org>
Message-Id: <20230529114333.31686-3-ppandit@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fixes: f9a09ca3ea ("vhost: add support for configure interrupt")
Reviewed-by: Peter Xu <peterx@redhat.com>
Cc: qemu-stable@nongnu.org
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
vhost_dev_start function does not release memory_listener object
in case of an error. This may crash the guest when vhost is unable
to set memory table:
stack trace of thread 125653:
Program terminated with signal SIGSEGV, Segmentation fault
#0 memory_listener_register (qemu-kvm + 0x6cda0f)
#1 vhost_dev_start (qemu-kvm + 0x699301)
#2 vhost_net_start (qemu-kvm + 0x45b03f)
#3 virtio_net_set_status (qemu-kvm + 0x665672)
#4 qmp_set_link (qemu-kvm + 0x548fd5)
#5 net_vhost_user_event (qemu-kvm + 0x552c45)
#6 tcp_chr_connect (qemu-kvm + 0x88d473)
#7 tcp_chr_new_client (qemu-kvm + 0x88cf83)
#8 tcp_chr_accept (qemu-kvm + 0x88b429)
#9 qio_net_listener_channel_func (qemu-kvm + 0x7ac07c)
#10 g_main_context_dispatch (libglib-2.0.so.0 + 0x54e2f)
Release memory_listener objects in the error path.
Signed-off-by: Prasad Pandit <pjp@fedoraproject.org>
Message-Id: <20230529114333.31686-2-ppandit@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Fixes: c471ad0e9b ("vhost_net: device IOTLB support")
Cc: qemu-stable@nongnu.org
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
The previous commit remove the unnecessary "virtio-access.h"
header. These files no longer have target-specific dependency.
Move them to the generic 'softmmu_ss' source set.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230524093744.88442-11-philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
None of these files use the VirtIO Load/Store API declared
by "hw/virtio/virtio-access.h". This header probably crept
in via copy/pasting, remove it.
Note, "virtio-access.h" is target-specific, so any file
including it also become tainted as target-specific.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230524093744.88442-10-philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
|
|
In order to have virtio-iommu.c become target-agnostic,
we need to avoid using TARGET_PAGE_MASK. Get it with the
qemu_target_page_mask() helper.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20230524093744.88442-9-philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
|
|
Instead of having "virtio/virtio-bus.h" implicitly included,
explicitly include it, to avoid when rearranging headers:
hw/virtio/vhost-vsock-common.c: In function ‘vhost_vsock_common_start’:
hw/virtio/vhost-vsock-common.c:51:5: error: unknown type name ‘VirtioBusClass’; did you mean ‘VirtioDeviceClass’?
51 | VirtioBusClass *k = VIRTIO_BUS_GET_CLASS(qbus);
| ^~~~~~~~~~~~~~
| VirtioDeviceClass
hw/virtio/vhost-vsock-common.c:51:25: error: implicit declaration of function ‘VIRTIO_BUS_GET_CLASS’; did you mean ‘VIRTIO_DEVICE_CLASS’? [-Werror=implicit-function-declaration]
51 | VirtioBusClass *k = VIRTIO_BUS_GET_CLASS(qbus);
| ^~~~~~~~~~~~~~~~~~~~
| VIRTIO_DEVICE_CLASS
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230524093744.88442-8-philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
|
|
Avoid accessing RAMBlock internals, use the provided
qemu_ram_get_fd() getter to get the file descriptor.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230524093744.88442-7-philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
|
|
Instead of adding 'vhost-vsock-common.c' twice (for VHOST_VSOCK
and VHOST_USER_VSOCK), have it depend on VHOST_VSOCK_COMMON,
selected by both symbols.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230524093744.88442-6-philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
|
|
Following the SCSI variable named '[specific_]scsi_ss', rename the
target-specific VirtIO/SCSI set prefixed with 'specific_'. This will
help when adding target-agnostic VirtIO/SCSI set in few commits.
No logical change.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230524093744.88442-5-philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
|
|
We will modify this file shortly. Re-arrange it slightly first,
declaring source sets first.
No logical change.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230524093744.88442-4-philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
|
|
Instead of adding 'vhost-scsi-common.c' twice (for VHOST_SCSI and
VHOST_USER_SCSI), have it depend on VHOST_SCSI_COMMON, selected by
both symbols.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230524093744.88442-3-philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
|
