aboutsummaryrefslogtreecommitdiff
path: root/hw
AgeCommit message (Collapse)Author
2017-04-25Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into ↵Peter Maydell
staging # gpg: Signature made Tue 25 Apr 2017 12:22:03 BST # gpg: using RSA key 0xEF04965B398D6211 # gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211 * remotes/jasowang/tags/net-pull-request: COLO-compare: Optimize tcp compare trace event COLO-compare: Optimize tcp compare for option field slirp: add a fake NC-SI backend aspeed: add a FTGMAC100 nic net/ftgmac100: add a 'aspeed' property net: add FTGMAC100 support hw/net: add MII definitions colo-compare: Fix old packet check bug. Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-04-25aspeed: add a FTGMAC100 nicCédric Le Goater
There is a second NIC but we do not use it for the moment. We use the 'aspeed' property to tune the definition of the end of ring buffer bit for the Aspeed SoCs. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-04-25net/ftgmac100: add a 'aspeed' propertyCédric Le Goater
The Aspeed SoCs have a different definition of the end of the ring buffer bit. Add a property to specify which set of bits should be used by the NIC. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-04-25hw/arm/exynos: Add generic SDHCI devicesKrzysztof Kozlowski
Exynos4210 has four SD/MMC controllers supporting: - SD Standard Host Specification Version 2.0, - MMC Specification Version 4.3, - SDIO Card Specification Version 2.0, - DMA and ADMA. Add emulation of SDHCI devices which allows accessing storage through SD cards. Differences from real hardware: - Devices are shipped with eMMC memory, not SD card. - The Exynos4210 SDHCI has few more registers, e.g. for controlling the clocks, additional status (0x80, 0x84, 0x8c). These are not implemented. Testing on smdkc210 machine with "-drive file=FILE,if=sd,bus=0,index=2". Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Message-id: 20170422190709.8676-1-krzk@kernel.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-04-24Merge remote-tracking branch 'remotes/kraxel/tags/pull-vga-20170424-1' into ↵Peter Maydell
staging fix display update races, part one. add xres + yres properties to qxl and virtio. misc fixes and cleanups. # gpg: Signature made Mon 24 Apr 2017 13:14:49 BST # gpg: using RSA key 0x4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/pull-vga-20170424-1: virtio-gpu: add xres and yres properties qxl: add xres and yres properties vmsvga: fix vmsvga_update_display g364fb: make display updates thread safe exynos: make display updates thread safe framebuffer: make display updates thread safe vga: make display updates thread safe. vga: add vga_scanline_invalidated helper memory: add support getting and using a dirty bitmap copy. bitmap: add bitmap_copy_and_clear_atomic virtio-gpu: replace PIXMAN_* by PIXMAN_BE_* console: add same displaychangelistener registration pre-condition console: add same surface replace pre-condition Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-04-24Merge remote-tracking branch 'remotes/armbru/tags/pull-error-2017-04-24' ↵Peter Maydell
into staging Error reporting patches for 2017-04-24 # gpg: Signature made Mon 24 Apr 2017 08:16:34 BST # gpg: using RSA key 0x3870B400EB918653 # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" # Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653 * remotes/armbru/tags/pull-error-2017-04-24: error: Apply error_propagate_null.cocci again qga: Make errp the last parameter of qga_vss_fsfreeze migration: Make errp the last parameter of local functions scsi: Make errp the last parameter of virtio_scsi_common_realize fdc: Make errp the last parameter of fdctrl_connect_drives nfs: Make errp the last parameter of nfs_client_open block: Make errp the last parameter of commit_active_start mirror: Make errp the last parameter of mirror_start_job crypto: Make errp the last parameter of functions block: Make errp the last parameter of bdrv_img_create socket: Make errp the last parameter of vsock_connect_saddr socket: Make errp the last parameter of unix_connect_saddr socket: Make errp the last parameter of inet_connect_saddr socket: Make errp the last parameter of socket_connect util/error: Fix leak in error_vprepend() Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-04-24sm501: Add vmstate descriptorBALATON Zoltan
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Aurelien Jarno <aurelien@aurel32.net> Message-id: 86803c6f40cd678b61b3b1a1429683f60f0aa89a.1492787889.git.balaton@eik.bme.hu Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-04-24sm501: Add some more missing registersBALATON Zoltan
This is to allow clients to initialise these without failing as long as no 2D engine function is called that would use the written value. Saved values are not used yet (may get used when more of 2D engine is added sometimes) and clients normally only write to most of these registers, nothing is known to ever read them but they are documented as read/write so also implement read for these. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Aurelien Jarno <aurelien@aurel32.net> Message-id: 80adf8e4d084ec6cc30d149f8e8215debb67314a.1492787889.git.balaton@eik.bme.hu Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-04-24sm501: Add support for panel layerBALATON Zoltan
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Aurelien Jarno <aurelien@aurel32.net> Message-id: 2029a276362c0c3a14c78acb56baa9466848dd51.1492787889.git.balaton@eik.bme.hu Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-04-24sm501: Misc clean upsBALATON Zoltan
- Rename a variable - Move variable declarations out of loop to the beginning in draw_hwc_line Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Aurelien Jarno <aurelien@aurel32.net> Message-id: 187c9e4e09d9bc2967b2454b36bb088ceef0b8bc.1492787889.git.balaton@eik.bme.hu Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-04-24sm501: Fix hardware cursorBALATON Zoltan
Rework HWC handling to simplify it and fix cursor not updating on screen as needed. Previously cursor was not updated because checking for changes in a line overrode the update flag set for the cursor but fixing this is not enough because the cursor should also be updated if its shape or location changes. Introduce hwc_invalidate() function to handle that similar to other display controller models. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Aurelien Jarno <aurelien@aurel32.net> Message-id: 6970a5e9868b7246656c1d02038dc5d5fa369507.1492787889.git.balaton@eik.bme.hu Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-04-24sm501: Fix device endiannessBALATON Zoltan
We only emulate the sysbus device in its default LE mode and PCI is LE as well so specify this for registers and framebuffer memory. Note that though the Linux kernel driver has code which claims to handle both big and little endian, it is obviously bogus for 16 bit and cannot be trusted as a source of information on the framebuffer pixel format. This is our best guess about device behaviour based on the specs and testing with MorphOS that is known to work on real HW. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Aurelien Jarno <aurelien@aurel32.net> Message-id: 8b9605a569f8bf54074e15903620b18cd9967c89.1492787889.git.balaton@eik.bme.hu Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-04-24sm501: Add emulation of chip connected via PCIBALATON Zoltan
Only the display controller part is created automatically on PCI Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Aurelien Jarno <aurelien@aurel32.net> Message-id: 647d292c6f5abba8b2a614687229949b5dcb864e.1492787889.git.balaton@eik.bme.hu Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-04-24sm501: Get rid of base address in draw_hwc_lineBALATON Zoltan
Do not use the base address to access data in local memory. This is in preparation to allow chip connected via PCI where base address depends on where the BAR is mapped so it will be unknown. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Aurelien Jarno <aurelien@aurel32.net> Message-id: 79dab21bc6ec4d563aabf265c3bab40e2e95aae8.1492787889.git.balaton@eik.bme.hu Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-04-24sm501: QOMifyBALATON Zoltan
Adding vmstate saving is not in this patch because the state structure will be changed in further patches, then another patch will add vmstate descriptor after those changes. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Aurelien Jarno <aurelien@aurel32.net> Message-id: a32b7fc981a20205f96d530d8e958f12ace1104c.1492787889.git.balaton@eik.bme.hu Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-04-24sm501: Add missing arbitration control registerBALATON Zoltan
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Aurelien Jarno <aurelien@aurel32.net> Message-id: d1eaf3b19c40aeb32a343a211f2b56664a67f948.1492787889.git.balaton@eik.bme.hu Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-04-24sm501: Use defined constants instead of literal values where availableBALATON Zoltan
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Aurelien Jarno <aurelien@aurel32.net> Message-id: 31205c2df623e7b133ef942ff4f5e95fff800a14.1492787889.git.balaton@eik.bme.hu Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-04-24sm501: Fixed code style and a few typos in commentsBALATON Zoltan
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Aurelien Jarno <aurelien@aurel32.net> Message-id: 36288b703e7d56822c818567193ff28cdc47377e.1492787889.git.balaton@eik.bme.hu Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-04-24Merge remote-tracking branch 'remotes/mcayland/tags/qemu-sparc-signed' into ↵Peter Maydell
staging qemu-sparc update # gpg: Signature made Fri 21 Apr 2017 20:09:35 BST # gpg: using RSA key 0x5BC2C56FAE0F321F # gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>" # Primary key fingerprint: CC62 1AB9 8E82 200D 915C C9C4 5BC2 C56F AE0F 321F * remotes/mcayland/tags/qemu-sparc-signed: tcx: switch to load_image_mr() and remove prom_addr hack tcx: use tcx_set_dirty() for accelerated ops tcx: remove primitives for non-32-bit surfaces tcx: remove TARGET_PAGE_SIZE from tcx24_update_display() tcx: remove TARGET_PAGE_SIZE from tcx_update_display() tcx: remove page24 and cpage from tcx24_update_display() tcx: alter tcx24_reset_dirty() to accept address and length parameters tcx: alter tcx24_check_dirty() to accept address and length parameters tcx: ensure tcx_set_dirty() also invalidates the 24-bit plane and cplane tcx: alter tcx_set_dirty() to accept address and length parameters cg3: switch to load_image_mr() and remove prom-addr hack cg3: fix up size parameter for memory_region_get_dirty() cg3: remove TARGET_PAGE_SIZE rounding on dirty page detection Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-04-24virtio-gpu: add xres and yres propertiesGerd Hoffmann
So the default resolution is configurable. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-id: 20170421092214.8176-1-kraxel@redhat.com
2017-04-24qxl: add xres and yres propertiesGerd Hoffmann
Add properties for the default display resolution, pass on that information to the guest so the driver can use it. Also move up qxl_crc32() function so we don't need a forward declaration. Additionally guest driver updates are needed so the guest driver will actually pick this up, which will probably land in linux kernel 4.12. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20170421092234.8368-1-kraxel@redhat.com
2017-04-24vmsvga: fix vmsvga_update_displayGerd Hoffmann
Fix standard vga mode check: Both s->config and s->enabled must be set to enable vmware command fifo processing. Drop dirty tracking code from the fifo rendering code path, it isn't used anyway because vmsvga turns off dirty tracking when leaving standard vga mode. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20170421091632.30900-9-kraxel@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-04-24g364fb: make display updates thread safeGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20170421091632.30900-8-kraxel@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-04-24exynos: make display updates thread safeGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20170421091632.30900-7-kraxel@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-04-24framebuffer: make display updates thread safeGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20170421091632.30900-6-kraxel@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-04-24vga: make display updates thread safe.Gerd Hoffmann
The vga code clears the dirty bits *after* reading the framebuffer memory. So if the guest framebuffer updates hits the race window between vga reading the framebuffer and vga clearing the dirty bits vga will miss that update Fix it by using the new memory_region_copy_and_clear_dirty() memory_region_copy_get_dirty() functions. That way we clear the dirty bitmap before reading the framebuffer. Any guest display updates happening in parallel will be properly tracked in the dirty bitmap then and the next display refresh will pick them up. Problem triggers with mttcg only. Before mttcg was merged tcg never ran in parallel to vga emulation. Using kvm will hide the problem too, due to qemu operating on a userspace copy of the kernel's dirty bitmap. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20170421091632.30900-5-kraxel@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-04-24vga: add vga_scanline_invalidated helperGerd Hoffmann
Add vga_scanline_invalidated helper to check whenever a scanline was invalidated. Add a sanity check to fix OOB read access for display heights larger than 2048. Only cirrus uses this, for hardware cursor rendering, so having this work properly for the first 2048 scanlines only shouldn't be a problem as the cirrus can't handle large resolutions anyway. Also changing the invalidated_y_table size would break live migration. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Message-id: 20170421091632.30900-4-kraxel@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-04-24virtio-gpu: replace PIXMAN_* by PIXMAN_BE_*Laurent Vivier
This avoids a "#ifdef HOST_WORDS_BIGENDIAN" and this is the purpose of PIXMAN_BE_* macros. Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Sahid Orentino Ferdjaoui <sahid.ferdjaoui@redhat.com> Message-id: 20170403114044.15762-1-lvivier@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-04-24error: Apply error_propagate_null.cocci againFam Zheng
Signed-off-by: Fam Zheng <famz@redhat.com> Message-Id: <20170421122710.15373-15-famz@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-04-24scsi: Make errp the last parameter of virtio_scsi_common_realizeFam Zheng
Signed-off-by: Fam Zheng <famz@redhat.com> Message-Id: <20170421122710.15373-12-famz@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-04-24fdc: Make errp the last parameter of fdctrl_connect_drivesFam Zheng
Signed-off-by: Fam Zheng <famz@redhat.com> Message-Id: <20170421122710.15373-11-famz@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-04-24net: add FTGMAC100 supportCédric Le Goater
The FTGMAC100 device is an Ethernet controller with DMA function that can be found on Aspeed SoCs (which include NCSI). It is fully compliant with IEEE 802.3 specification for 10/100 Mbps Ethernet and IEEE 802.3z specification for 1000 Mbps Ethernet and includes Reduced Media Independent Interface (RMII) and Reduced Gigabit Media Independent Interface (RGMII) interfaces. It adopts an AHB bus interface and integrates a link list DMA engine with direct M-Bus accesses for transmitting and receiving packets. It has independent TX/RX fifos, supports half and full duplex (1000 Mbps mode only supports full duplex), flow control for full duplex and backpressure for half duplex. The FTGMAC100 also implements IP, TCP, UDP checksum offloads and supports IEEE 802.1Q VLAN tag insertion and removal. It offers high-priority transmit queue for QoS and CoS applications This model is backed with a RealTek 8211E PHY which is the chip found on the AST2500 EVB. It is complete enough to satisfy two different Linux drivers and a U-Boot driver. Not supported features are : - IEEE 802.1Q VLAN - High Priority Transmit Queue - Wake-On-LAN functions The code is based on the Coldfire Fast Ethernet Controller model. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-04-21Merge remote-tracking branch 'remotes/juanquintela/tags/migration/20170421' ↵Peter Maydell
into staging migration/next for 20170421 # gpg: Signature made Fri 21 Apr 2017 11:28:13 BST # gpg: using RSA key 0xF487EF185872D723 # gpg: Good signature from "Juan Quintela <quintela@redhat.com>" # gpg: aka "Juan Quintela <quintela@trasno.org>" # Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723 * remotes/juanquintela/tags/migration/20170421: (65 commits) hmp: info migrate_parameters format tunes hmp: info migrate_capability format tunes migration: rename max_size to threshold_size migration: set current_active_state once virtio-rng: stop virtqueue while the CPU is stopped migration: don't close a file descriptor while it can be in use ram: Remove migration_bitmap_extend() migration: Disable hotplug/unplug during migration qdev: Move qdev_unplug() to qdev-monitor.c qdev: Export qdev_hot_removed qdev: qdev_hotplug is really a bool migration: Remove MigrationState parameter from migration_is_idle() ram: Use RAMBitmap type for coherence ram: rename last_ram_offset() last_ram_pages() ram: Use ramblock and page offset instead of absolute offset ram: Change offset field in PageSearchStatus to page ram: Remember last_page instead of last_offset ram: Use page number instead of an address for the bitmap operations ram: reorganize last_sent_block ram: ram_discard_range() don't use the mis parameter ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-04-21Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20170421' into stagingPeter Maydell
The first batch of s390x changes for 2.10: - the new compat machine - several cleanups and optimizations - introspection for css ids # gpg: Signature made Fri 21 Apr 2017 08:36:25 BST # gpg: using RSA key 0xDECF6B93C6F02FAF # gpg: Good signature from "Cornelia Huck <huckc@linux.vnet.ibm.com>" # gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>" # Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF * remotes/cohuck/tags/s390x-20170421: s390x: Drop useless casts s390x: register I/O adapters per ISC during init s390x/flic: cache flic in s390_get_flic s390x: initialize flic before I/O subsystems s390x: use enum for adapter type and standardize its naming s390x/css: consolidate the devno property for ccw devices s390x/css: provide introspection for virtual subchannel and device busid s390x/css: introduce read-only property type for device ids s390x/pci: make printf always compile in debug output s390x/kvm: make printf always compile in debug output s390x: introduce 2.10 compat machine Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-04-21Merge remote-tracking branch 'remotes/armbru/tags/pull-qdev-2017-04-21' into ↵Peter Maydell
staging qdev patches for 2017-04-21 # gpg: Signature made Fri 21 Apr 2017 06:37:19 BST # gpg: using RSA key 0x3870B400EB918653 # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" # Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653 * remotes/armbru/tags/pull-qdev-2017-04-21: qdev: remove cannot_destroy_with_object_finalize_yet versatile: remove cannot_destroy_with_object_finalize_yet ppc: remove cannot_destroy_with_object_finalize_yet arm: remove remaining cannot_destroy_with_object_finalize_yet Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-04-21virtio-rng: stop virtqueue while the CPU is stoppedLaurent Vivier
If we modify the virtio-rng virqueue while the vmstate is already migrated we can have some inconsistencies between the virtqueue state and the memory content. To avoid this, stop the virtqueue while the CPU is stopped. Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Amit Shah <amit@kernel.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-04-21qdev: Move qdev_unplug() to qdev-monitor.cJuan Quintela
It is not used by linux-user, otherwise I need to to create one stub for migration_is_idle() on following patch. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
2017-04-21qdev: Export qdev_hot_removedJuan Quintela
I need to move qdev_unplug to qdev-monitor in the following patch, and it needs access to this variable. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
2017-04-21qdev: qdev_hotplug is really a boolJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-04-21tcx: switch to load_image_mr() and remove prom_addr hackMark Cave-Ayland
Previous to the existence of load_image_mr(), the only way to load in the FCode ROM image was to pass in its physical address via qdev properties and use load_image_targphys(). Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
2017-04-21tcx: use tcx_set_dirty() for accelerated opsMark Cave-Ayland
Rather than calling memory_region_set_dirty() directly, make sure that we call tcx_set_dirty() instead. This ensures that the 24-bit plane and cplane are also invalidated correctly. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
2017-04-21tcx: remove primitives for non-32-bit surfacesMark Cave-Ayland
As all surfaces in QEMU are now either shared or 32-bit ARGB regardless of the guest depth, remove all non-32-bit primitives from tcx_update_display() and consequence their implementation which are no longer required. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
2017-04-21tcx: remove TARGET_PAGE_SIZE from tcx24_update_display()Mark Cave-Ayland
Now that page alignment is handled by the memory API, there is no need to duplicate the code 4 times (4 * 1024 == 4096 == TARGET_PAGE_SIZE). Finally we have now removed all traces of TARGET_PAGE_SIZE. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
2017-04-21tcx: remove TARGET_PAGE_SIZE from tcx_update_display()Mark Cave-Ayland
Now that page alignment is handled by the memory API, there is no need to duplicate the code 4 times (4 * 1024 == 4096 == TARGET_PAGE_SIZE). Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
2017-04-21tcx: remove page24 and cpage from tcx24_update_display()Mark Cave-Ayland
Since all of the tcx_*_dirty() functions now calculate the 24-bit and cplane offsets themselves from the base address, these variables are no longer needed. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
2017-04-21tcx: alter tcx24_reset_dirty() to accept address and length parametersMark Cave-Ayland
This can now be used by both the 8-bit and 24-bit display code, so rename to tcx_check_dirty(). Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
2017-04-21tcx: alter tcx24_check_dirty() to accept address and length parametersMark Cave-Ayland
This can now be used by both the 8-bit and 24-bit display code, so rename to tcx_check_dirty(). Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
2017-04-21tcx: ensure tcx_set_dirty() also invalidates the 24-bit plane and cplaneMark Cave-Ayland
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
2017-04-21tcx: alter tcx_set_dirty() to accept address and length parametersMark Cave-Ayland
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
2017-04-21cg3: switch to load_image_mr() and remove prom-addr hackMark Cave-Ayland
Previous to the existence of load_image_mr(), the only way to load in the FCode ROM image was to pass in its physical address via qdev properties and use load_image_targphys(). Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
generated by cgit v1.2.3 (git 2.26.2) at 2025-02-11 02:02:33 +0000