aboutsummaryrefslogtreecommitdiff
path: root/hw/xtensa
AgeCommit message (Collapse)Author
2019-08-16sysemu: Split sysemu/runstate.h off sysemu/sysemu.hMarkus Armbruster
sysemu/sysemu.h is a rather unfocused dumping ground for stuff related to the system-emulator. Evidence: * It's included widely: in my "build everything" tree, changing sysemu/sysemu.h still triggers a recompile of some 1100 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h, down from 5400 due to the previous two commits). * It pulls in more than a dozen additional headers. Split stuff related to run state management into its own header sysemu/runstate.h. Touching sysemu/sysemu.h now recompiles some 850 objects. qemu/uuid.h also drops from 1100 to 850, and qapi/qapi-types-run-state.h from 4400 to 4200. Touching new sysemu/runstate.h recompiles some 500 objects. Since I'm touching MAINTAINERS to add sysemu/runstate.h anyway, also add qemu/main-loop.h. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190812052359.30071-30-armbru@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> [Unbreak OS-X build]
2019-08-16Clean up inclusion of sysemu/sysemu.hMarkus Armbruster
In my "build everything" tree, changing sysemu/sysemu.h triggers a recompile of some 5400 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). Almost a third of its inclusions are actually superfluous. Delete them. Downgrade two more to qapi/qapi-types-run-state.h, and move one from char/serial.h to char/serial.c. hw/semihosting/config.c, monitor/monitor.c, qdev-monitor.c, and stubs/semihost.c define variables declared in sysemu/sysemu.h without including it. The compiler is cool with that, but include it anyway. This doesn't reduce actual use much, as it's still included into widely included headers. The next commit will tackle that. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-27-armbru@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2019-08-16Include hw/boards.h a bit lessMarkus Armbruster
hw/boards.h pulls in almost 60 headers. The less we include it into headers, the better. As a first step, drop superfluous inclusions, and downgrade some more to what's actually needed. Gets rid of just one inclusion into a header. Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-23-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
2019-08-16Include hw/qdev-properties.h lessMarkus Armbruster
In my "build everything" tree, changing hw/qdev-properties.h triggers a recompile of some 2700 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). Many places including hw/qdev-properties.h (directly or via hw/qdev.h) actually need only hw/qdev-core.h. Include hw/qdev-core.h there instead. hw/qdev.h is actually pointless: all it does is include hw/qdev-core.h and hw/qdev-properties.h, which in turn includes hw/qdev-core.h. Replace the remaining uses of hw/qdev.h by hw/qdev-properties.h. While there, delete a few superfluous inclusions of hw/qdev-core.h. Touching hw/qdev-properties.h now recompiles some 1200 objects. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Daniel P. Berrangé" <berrange@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20190812052359.30071-22-armbru@redhat.com>
2019-08-16Include hw/hw.h exactly where neededMarkus Armbruster
In my "build everything" tree, changing hw/hw.h triggers a recompile of some 2600 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). The previous commits have left only the declaration of hw_error() in hw/hw.h. This permits dropping most of its inclusions. Touching it now recompiles less than 200 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-19-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16Include exec/memory.h slightly lessMarkus Armbruster
Drop unnecessary inclusions from headers. Downgrade a few more to exec/hwaddr.h. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190812052359.30071-17-armbru@redhat.com>
2019-08-16Include migration/vmstate.h lessMarkus Armbruster
In my "build everything" tree, changing migration/vmstate.h triggers a recompile of some 2700 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). hw/hw.h supposedly includes it for convenience. Several other headers include it just to get VMStateDescription. The previous commit made that unnecessary. Include migration/vmstate.h only where it's still needed. Touching it now recompiles only some 1600 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-16-armbru@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16Include hw/irq.h a lot lessMarkus Armbruster
In my "build everything" tree, changing hw/irq.h triggers a recompile of some 5400 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). hw/hw.h supposedly includes it for convenience. Several other headers include it just to get qemu_irq and.or qemu_irq_handler. Move the qemu_irq and qemu_irq_handler typedefs from hw/irq.h to qemu/typedefs.h, and then include hw/irq.h only where it's still needed. Touching it now recompiles only some 500 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190812052359.30071-13-armbru@redhat.com>
2019-08-16Include sysemu/reset.h a lot lessMarkus Armbruster
In my "build everything" tree, changing sysemu/reset.h triggers a recompile of some 2600 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). The main culprit is hw/hw.h, which supposedly includes it for convenience. Include sysemu/reset.h only where it's needed. Touching it now recompiles less than 200 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190812052359.30071-9-armbru@redhat.com>
2019-07-05hw: Replace global smp variables with MachineState for all remaining archsLike Xu
The global smp variables in alpha/hppa/mips/openrisc/sparc*/xtensa codes are replaced with smp properties from MachineState. A local variable of the same name would be introduced in the declaration phase if it's used widely in the context OR replace it on the spot if it's only used once. No semantic changes. Signed-off-by: Like Xu <like.xu@linux.intel.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190518205428.90532-10-like.xu@linux.intel.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-06-12Include qemu-common.h exactly where neededMarkus Armbruster
No header includes qemu-common.h after this commit, as prescribed by qemu-common.h's file comment. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-5-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and net/tap-bsd.c fixed up]
2019-06-10target/xtensa: Use env_cpu, env_archcpuRichard Henderson
Cleanup in the boilerplate that each target must define. Replace xtensa_env_get_cpu with env_archcpu. The combination CPU(xtensa_env_get_cpu) should have used ENV_GET_CPU to begin; use env_cpu now. Move cpu_get_tb_cpu_state below the include of "exec/cpu-all.h" so that the definition of env_cpu is available. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-13Clean up ill-advised or unusual header guardsMarkus Armbruster
Leading underscores are ill-advised because such identifiers are reserved. Trailing underscores are merely ugly. Strip both. Our header guards commonly end in _H. Normalize the exceptions. Done with scripts/clean-header-guards.pl. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190315145123.28030-7-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> [Changes to slirp/ dropped, as we're about to spin it off]
2019-03-11hw: Use PFLASH_CFI0{1,2} and TYPE_PFLASH_CFI0{1,2}Markus Armbruster
We have two open-coded copies of macro PFLASH_CFI01(). Move the macro to the header, so we can ditch the copies. Move PFLASH_CFI02() to the header for symmetry. We define macros TYPE_PFLASH_CFI01 and TYPE_PFLASH_CFI02 for type name strings, then mostly use the strings. If the macros are worth defining, they are worth using. Replace the strings by the macros. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20190308094610.21210-6-armbru@redhat.com>
2019-03-11pflash: Rename pflash_t to PFlashCFI01, PFlashCFI02Markus Armbruster
flash.h's incomplete struct pflash_t is completed both in pflash_cfi01.c and in pflash_cfi02.c. The complete types are incompatible. This can hide type errors, such as passing a pflash_t created with pflash_cfi02_register() to pflash_cfi01_get_memory(). Furthermore, POSIX reserves typedef names ending with _t. Rename the two structs to PFlashCFI01 and PFlashCFI02. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190308094610.21210-2-armbru@redhat.com>
2019-03-07xtensa-softmmu.mak: express dependencies with KconfigPaolo Bonzini
%-softmmu.mak only keep boards and optional device definitions in Kconfig mode. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07build: switch to KconfigPaolo Bonzini
The make_device_config.sh script is replaced by minikconf, which is modified to support the same command line as its predecessor. The roots of the parsing are default-configs/*.mak, Kconfig.host and hw/Kconfig. One difference with make_device_config.sh is that all symbols have to be defined in a Kconfig file, including those coming from the configure script. This is the reason for the Kconfig.host file introduced in the previous patch. Whenever a file in default-configs/*.mak used $(...) to refer to a config-host.mak symbol, this is replaced by a Kconfig dependency; this part must be done already in this patch for bisectability. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Acked-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190123065618.3520-28-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07kconfig: introduce kconfig filesPaolo Bonzini
The Kconfig files were generated mostly with this script: for i in `grep -ho CONFIG_[A-Z0-9_]* default-configs/* | sort -u`; do set fnord `git grep -lw $i -- 'hw/*/Makefile.objs' ` shift if test $# = 1; then cat >> $(dirname $1)/Kconfig << EOF config ${i#CONFIG_} bool EOF git add $(dirname $1)/Kconfig else echo $i $* fi done sed -i '$d' hw/*/Kconfig for i in hw/*; do if test -d $i && ! test -f $i/Kconfig; then touch $i/Kconfig git add $i/Kconfig fi done Whenever a symbol is referenced from multiple subdirectories, the script prints the list of directories that reference the symbol. These symbols have to be added manually to the Kconfig files. Kconfig.host and hw/Kconfig were created manually. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-27-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07xtensa: rename CONFIG_XTENSA_FPGA to CONFIG_XTENSA_XTFPGAPaolo Bonzini
Match the symbol name that is used e.g. in Linux (drivers/spi/Kconfig). Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05hw/xtensa/Makefile.objs: Build xtensa_sim and xtensa_fpga conditionallyÁkos Kovács
Add the new CONFIG_* values to default-config/xtensa*-softmmu.mak. Signed-off-by: Ákos Kovács <akoskovacs@gmx.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Message-Id: <20190202072456.6468-17-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-05elf: Add optional function ptr to load_elf() to parse ELF notesLiam Merwick
This patch adds an optional function pointer, 'elf_note_fn', to load_elf() which causes load_elf() to additionally parse any ELF program headers of type PT_NOTE and check to see if the ELF Note is of the type specified by the 'translate_opaque' arg. If a matching ELF Note is found then the specfied function pointer is called to process the ELF note. Passing a NULL function pointer results in ELF Notes being skipped. The first consumer of this functionality is the PVHboot support which needs to read the XEN_ELFNOTE_PHYS32_ENTRY ELF Note while loading the uncompressed kernel binary in order to discover the boot entry address for the x86/HVM direct boot ABI. Signed-off-by: Liam Merwick <liam.merwick@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-28hw/xtensa: xtfpga: raise CPU number limitMax Filippov
MX PIC can support up to 32 CPUs on xtfpga boards, raise per-board limit accordingly. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2019-01-28hw/xtensa: xtfpga: use MX PIC for SMPMax Filippov
Create and use MX PIC as a peripheral interrupt controller when more than 1 processor is enabled on xtfpga board. Connect xtensa CPU cores to the MX PIC and select secondary reset vector on all cores except the first one. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2019-01-28target/xtensa: add MX interrupt controllerMax Filippov
MX interrupt controller is a collection of the following devices accessible through the external registers interface: - interrupt distributor can route each external IRQ line to the corresponding external IRQ pin of selected subset of connected xtensa cores. It has per-CPU and per-IRQ enable signals and per-IRQ software assert signals; - IPI controller has 16 per-CPU IPI signals that may be routed to a combination of 3 designated external IRQ pins of connected xtensa cores; - cache coherecy register controls core L1 cache participation in the SMP cluster cache coherency protocol; - runstall register lets BSP core stall and unstall AP cores. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2019-01-28target/xtensa: expose core runstall as an IRQ lineMax Filippov
Runstall signal looks very much like a level-triggered IRQ line. Provide xtensa_get_runstall function that returns runstall IRQ. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2019-01-28target/xtensa: rearrange access to external interruptsMax Filippov
Replace xtensa_get_extint that returns single external IRQ descriptor with xtensa_get_extints that returns a vector of all external IRQs. Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2019-01-28target/xtensa: drop function xtensa_timer_irqMax Filippov
It's a one-liner used in a single place, move its implementation there and remove its declaration. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2019-01-24target/xtensa: fix access to the INTERRUPT SRMax Filippov
INTERRUPT special register may be changed both by the core (by writing to INTSET and INTCLEAR registers) and by external events (by triggering and clearing HW IRQs). In MTTCG this state must be protected from concurrent access, otherwise interrupts may be lost or spurious interrupts may be detected. Use atomic operations to change INTSET SR. Fix wsr.intset so that it soesn't clear any bits. Fix wsr.intclear so that it doesn't clear bit that corresponds to NMI. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2019-01-24hw/xtensa: xtfpga: use core frequencyMax Filippov
XTFPGA board FPGA peripheral exposes hard-coded 10MHz frequency regardless of the actual used core frequency. Expose actual core frequency instead. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2019-01-24hw/xtensa: xtfpga: fix bootloader placement in SMPMax Filippov
Use BSP reset PC as a place for the mini-bootloader because in SMP configurations APs and BSP may have different boot addresses. This fixes SMP linux uImage boot on xtfpga boards. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2018-11-21target/xtensa: xtfpga: provide default memory sizesMax Filippov
Provide default RAM sizes for all XTFPGA boards, so that when started without -m option they do the right thing. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2018-07-02hw/xtensa: Use the IEC binary prefix definitionsPhilippe Mathieu-Daudé
It eases code review, unit is explicit. Patch generated using: $ git grep -E '(1024|2048|4096|8192|(<<|>>).?(10|20|30))' hw/ include/hw/ $ git grep -n '[<>][<>]= ?[1-5]0' and modified manually. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Message-Id: <20180625124238.25339-22-f4bug@amsat.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-06-01hw: Do not include "sysemu/block-backend.h" if it is not necessaryPhilippe Mathieu-Daudé
Remove those unneeded includes to speed up the compilation process a little bit. (Continue 7eceff5b5a1fa cleanup) Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180528232719.4721-13-f4bug@amsat.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-04-26Change references to serial_hds[] to serial_hd()Peter Maydell
Change all the uses of serial_hds[] to go via the new serial_hd() function. Code change produced with: find hw -name '*.[ch]' | xargs sed -i -e 's/serial_hds\[\([^]]*\)\]/serial_hd(\1)/g' Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 20180420145249.32435-8-peter.maydell@linaro.org
2018-04-26hw/xtensa/xtfpga.c: Don't create "null" chardevs for serial devicesPeter Maydell
Following commit 12051d82f004024, UART devices should handle being passed a NULL pointer chardev, so we don't need to create "null" backends in board code. Remove the code that does this and updates serial_hds[]. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180420145249.32435-6-peter.maydell@linaro.org
2018-02-09Move include qemu/option.h from qemu-common.h to actual usersMarkus Armbruster
qemu-common.h includes qemu/option.h, but most places that include the former don't actually need the latter. Drop the include, and add it to the places that actually need it. While there, drop superfluous includes of both headers, and separate #include from file comment with a blank line. This cleanup makes the number of objects depending on qemu/option.h drop from 4545 (out of 4743) to 284 in my "build everything" tree. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-20-armbru@redhat.com> [Semantic conflict with commit bdd6a90a9e in block/nvme.c resolved]
2018-02-09Clean up includesMarkus Armbruster
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes, with the change to target/s390x/gen-features.c manually reverted, and blank lines around deletions collapsed. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-3-armbru@redhat.com>
2018-01-22target/xtensa: allow different default CPU for MMU/noMMUMax Filippov
Define default core for noMMU configurations and use that core as machine default with noMMU XTFPGA machines. This is done to avoid offering non-working configuration (MMU core on a noMMU machine) as a default. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2018-01-11hw/xtensa/xtfpga: support noMMU coresMax Filippov
Cores with and without MMU have system RAM and ROM at different locations. Also with noMMU cores system IO region is accessible through two physical address ranges. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2018-01-11hw/xtensa/xtfpga: extract flash configurationMax Filippov
Extract flash configuration into a separate structure to make it easier to share between MMU and noMMU configurations. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2018-01-11hw/xtensa: extract xtensa_create_memory_regionsMax Filippov
XTFPGA boards should populate core memory regions the same way sim machine does. Move xtensa_create_memory_regions implementation to a separate file and use it to create instruction and data memory regions on XTFPGA boards. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2018-01-11hw/xtensa/xtfpga: clean up function/structure namesMax Filippov
Function/structure naming inconsistently uses lx, lx60 and xtensa prefixes where xtfpga would be appropriate. Fix that. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2018-01-11hw/xtensa/xtfpga: rewrite mini bootloaderMax Filippov
Don't load jump target into the CPU config, instead put it and initial a2 as literals into the mini bootloader and use l32r to load them natively. With these changes it should be possible to do warm reboot of the guest. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2017-10-27xtensa: lx60/lx200/ml605/kc705: use generic cpu_model parsingIgor Mammedov
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <1507211474-188400-27-git-send-email-imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-10-27xtensa: sim: use generic cpu_model parsingIgor Mammedov
Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <1507211474-188400-26-git-send-email-imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-09-19cpu: make cpu_generic_init() abort QEMU on errorIgor Mammedov
Almost every user of cpu_generic_init() checks for returned NULL and then reports failure in a custom way and aborts process. Some users assume that call can't fail and don't check for failure, though they should have checked for it. In either cases cpu_generic_init() failure is fatal, so instead of checking for failure and reporting it various ways, make cpu_generic_init() report errors in consistent way and terminate QEMU on failure. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <1505318697-77161-3-git-send-email-imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-09-01xtensa: replace cpu_xtensa_init() with cpu_generic_init()Igor Mammedov
call xtensa_irq_init() at realize time which makes cpu_xtensa_init() like generic cpu creation function. As result we can replace it with cpu_generic_init() which does the same job, reducing code duplication a bit. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <1503592308-93913-16-git-send-email-imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-07-14hw: Use new memory_region_init_{ram, rom, rom_device}() functionsPeter Maydell
Use the new functions memory_region_init_{ram,rom,rom_device}() instead of manually calling the _nomigrate() version and then vmstate_register_ram_global(). Patch automatically created using coccinelle script: spatch --in-place -sp_file scripts/coccinelle/memory-region-init-ram.cocci -dir hw (As it turns out, there are no instances of the rom and rom_device functions that are caught by this script.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1499438577-7674-8-git-send-email-peter.maydell@linaro.org
2017-07-14memory: Rename memory_region_init_ram() to memory_region_init_ram_nomigrate()Peter Maydell
Rename memory_region_init_ram() to memory_region_init_ram_nomigrate(). This leaves the way clear for us to provide a memory_region_init_ram() which does handle migration. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1499438577-7674-4-git-send-email-peter.maydell@linaro.org
2017-06-06target/xtensa: support output to chardev consoleMax Filippov
In semihosting mode QEMU allows guest to read and write host file descriptors directly, including descriptors 0..2, a.k.a. stdin, stdout and stderr. Sometimes it's desirable to have semihosting console controlled by -serial option, e.g. to connect it to network. Add semihosting console to xtensa-semi.c, open it in the 'sim' machine in the presence of -serial option and direct stdout and stderr to it when it's present. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-23 20:07:50 +0000