aboutsummaryrefslogtreecommitdiff
path: root/hw/xen
AgeCommit message (Collapse)Author
2019-09-24xen-bus: only set the xen device frontend state if it is missingMark Syms
Some toolstack implementations will set the frontend xenstore keys to Initialising which will then trigger the in guest PV drivers to begin initialising and some implementations will then set their state to Closing. If this has occurred then device realize must not overwrite the frontend keys as then the handshake will stall. Signed-off-by: Mark Syms <mark.syms@citrix.com> Also avoid creating the frontend area if it already exists. Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Reviewed-by: Anthony PERARD <anthony.perard@citrix.com> Message-Id: <20190918115745.39006-1-paul.durrant@citrix.com> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2019-09-24xen: perform XenDevice clean-up in XenBus watch handlerPaul Durrant
Cleaning up offline XenDevice objects directly in xen_device_backend_changed() is dangerous as xen_device_unrealize() will modify the watch list that is being walked. Even the QLIST_FOREACH_SAFE() used in notifier_list_notify() is insufficient as *two* notifiers (for the frontend and backend watches) are removed, thus potentially rendering the 'next' pointer unsafe. The solution is to use the XenBus backend_watch handler to do the clean-up instead, as it is invoked whilst walking a separate watch list. This patch therefore adds a new 'inactive_devices' list to XenBus, to which offline devices are added by xen_device_backend_changed(). The XenBus backend_watch registration is also changed to not only invoke xen_bus_enumerate() but also a new xen_bus_cleanup() function, which will walk 'inactive_devices' and perform the necessary actions. For safety an extra 'online' check is also added to xen_bus_type_enumerate() to make sure that no attempt is made to create a new XenDevice object for a backend that is offline. NOTE: This patch also includes some cosmetic changes: - substitute the local variable name 'backend_state' in xen_bus_type_enumerate() with 'state', since there is no ambiguity with any other state in that context. - change xen_device_state_is_active() to xen_device_frontend_is_active() (and pass a XenDevice directly) since the state tests contained therein only apply to a frontend. - use 'state' rather then 'xendev->backend_state' in xen_device_backend_changed() to shorten the code. Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Reviewed-by: Anthony PERARD <anthony.perard@citrix.com> Message-Id: <20190913082159.31338-4-paul.durrant@citrix.com> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2019-09-24xen: introduce separate XenWatchList for XenDevice objectsPaul Durrant
This patch uses the XenWatchList abstraction to add a separate watch list for each device. This is more scalable than walking a single notifier list for all watches and is also necessary to implement a bug-fix in a subsequent patch. Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Reviewed-by: Anthony Perard <anthony.perard@citrix.com> Message-Id: <20190913082159.31338-3-paul.durrant@citrix.com> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2019-09-24xen / notify: introduce a new XenWatchList abstractionPaul Durrant
Xenstore watch call-backs are already abstracted away from XenBus using the XenWatch data structure but the associated NotifierList manipulation and file handle registration is still open coded in various xen_bus_...() functions. This patch creates a new XenWatchList data structure to allow these interactions to be abstracted away from XenBus as well. This is in preparation for a subsequent patch which will introduce separate watch lists for XenBus and XenDevice objects. NOTE: This patch also introduces a new notifier_list_empty() helper function for the purposes of adding an assertion that a XenWatchList is not freed whilst its associated NotifierList is still occupied. Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Reviewed-by: Anthony Perard <anthony.perard@citrix.com> Message-Id: <20190913082159.31338-2-paul.durrant@citrix.com> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2019-09-24xen-bus: check whether the frontend is active during device reset...Paul Durrant
...not the backend Commit cb323146 "xen-bus: Fix backend state transition on device reset" contained a subtle mistake. The hunk @@ -539,11 +556,11 @@ static void xen_device_backend_changed(void *opaque) /* * If the toolstack (or unplug request callback) has set the backend - * state to Closing, but there is no active frontend (i.e. the - * state is not Connected) then set the backend state to Closed. + * state to Closing, but there is no active frontend then set the + * backend state to Closed. */ if (xendev->backend_state == XenbusStateClosing && - xendev->frontend_state != XenbusStateConnected) { + !xen_device_state_is_active(state)) { xen_device_backend_set_state(xendev, XenbusStateClosed); } mistakenly replaced the check of 'xendev->frontend_state' with a check (now in a helper function) of 'state', which actually equates to 'xendev->backend_state'. This patch fixes the mistake. Fixes: cb3231460747552d70af9d546dc53d8195bcb796 Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Reviewed-by: Anthony PERARD <anthony.perard@citrix.com> Message-Id: <20190910171753.3775-1-paul.durrant@citrix.com> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2019-08-27xen-bus: Avoid rewriting identical values to xenstoreAnthony PERARD
When QEMU receives a xenstore watch event suggesting that the "state" of the frontend changed, it records this in its own state but it also re-write the value back into xenstore even so there were no change. This triggers an unnecessary xenstore watch event which QEMU will process again (and maybe the frontend as well). Also QEMU could potentially write an already old value. Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Reviewed-by: Paul Durrant <paul.durrant@citrix.com> Message-Id: <20190823101534.465-3-anthony.perard@citrix.com>
2019-08-27xen-bus: Fix backend state transition on device resetAnthony PERARD
When a frontend wants to reset its state and the backend one, it starts with setting "Closing", then waits for the backend (QEMU) to do the same. But when QEMU is setting "Closing" to its state, it triggers an event (xenstore watch) that re-execute xen_device_backend_changed() and set the backend state to "Closed". QEMU should wait for the frontend to set "Closed" before doing the same. Before setting "Closed" to the backend_state, we are also going to check if there is a frontend. If that the case, when the backend state is set to "Closing" the frontend should react and sets its state to "Closing" then "Closed". The backend should wait for that to happen. Fixes: b6af8926fb858c4f1426e5acb2cfc1f0580ec98a Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Reviewed-by: Paul Durrant <paul.durrant@citrix.com> Message-Id: <20190823101534.465-2-anthony.perard@citrix.com>
2019-08-16sysemu: Split sysemu/runstate.h off sysemu/sysemu.hMarkus Armbruster
sysemu/sysemu.h is a rather unfocused dumping ground for stuff related to the system-emulator. Evidence: * It's included widely: in my "build everything" tree, changing sysemu/sysemu.h still triggers a recompile of some 1100 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h, down from 5400 due to the previous two commits). * It pulls in more than a dozen additional headers. Split stuff related to run state management into its own header sysemu/runstate.h. Touching sysemu/sysemu.h now recompiles some 850 objects. qemu/uuid.h also drops from 1100 to 850, and qapi/qapi-types-run-state.h from 4400 to 4200. Touching new sysemu/runstate.h recompiles some 500 objects. Since I'm touching MAINTAINERS to add sysemu/runstate.h anyway, also add qemu/main-loop.h. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190812052359.30071-30-armbru@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> [Unbreak OS-X build]
2019-08-16Include sysemu/sysemu.h a lot lessMarkus Armbruster
In my "build everything" tree, changing sysemu/sysemu.h triggers a recompile of some 5400 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). hw/qdev-core.h includes sysemu/sysemu.h since recent commit e965ffa70a "qdev: add qdev_add_vm_change_state_handler()". This is a bad idea: hw/qdev-core.h is widely included. Move the declaration of qdev_add_vm_change_state_handler() to sysemu/sysemu.h, and drop the problematic include from hw/qdev-core.h. Touching sysemu/sysemu.h now recompiles some 1800 objects. qemu/uuid.h also drops from 5400 to 1800. A few more headers show smaller improvement: qemu/notify.h drops from 5600 to 5200, qemu/timer.h from 5600 to 4500, and qapi/qapi-types-run-state.h from 5500 to 5000. Cc: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20190812052359.30071-28-armbru@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2019-08-16Clean up inclusion of sysemu/sysemu.hMarkus Armbruster
In my "build everything" tree, changing sysemu/sysemu.h triggers a recompile of some 5400 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). Almost a third of its inclusions are actually superfluous. Delete them. Downgrade two more to qapi/qapi-types-run-state.h, and move one from char/serial.h to char/serial.c. hw/semihosting/config.c, monitor/monitor.c, qdev-monitor.c, and stubs/semihost.c define variables declared in sysemu/sysemu.h without including it. The compiler is cool with that, but include it anyway. This doesn't reduce actual use much, as it's still included into widely included headers. The next commit will tackle that. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-27-armbru@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2019-08-16Include hw/qdev-properties.h lessMarkus Armbruster
In my "build everything" tree, changing hw/qdev-properties.h triggers a recompile of some 2700 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). Many places including hw/qdev-properties.h (directly or via hw/qdev.h) actually need only hw/qdev-core.h. Include hw/qdev-core.h there instead. hw/qdev.h is actually pointless: all it does is include hw/qdev-core.h and hw/qdev-properties.h, which in turn includes hw/qdev-core.h. Replace the remaining uses of hw/qdev.h by hw/qdev-properties.h. While there, delete a few superfluous inclusions of hw/qdev-core.h. Touching hw/qdev-properties.h now recompiles some 1200 objects. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Daniel P. Berrangé" <berrange@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20190812052359.30071-22-armbru@redhat.com>
2019-08-16Include qemu/main-loop.h lessMarkus Armbruster
In my "build everything" tree, changing qemu/main-loop.h triggers a recompile of some 5600 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). It includes block/aio.h, which in turn includes qemu/event_notifier.h, qemu/notify.h, qemu/processor.h, qemu/qsp.h, qemu/queue.h, qemu/thread-posix.h, qemu/thread.h, qemu/timer.h, and a few more. Include qemu/main-loop.h only where it's needed. Touching it now recompiles only some 1700 objects. For block/aio.h and qemu/event_notifier.h, these numbers drop from 5600 to 2800. For the others, they shrink only slightly. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190812052359.30071-21-armbru@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16Include hw/hw.h exactly where neededMarkus Armbruster
In my "build everything" tree, changing hw/hw.h triggers a recompile of some 2600 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). The previous commits have left only the declaration of hw_error() in hw/hw.h. This permits dropping most of its inclusions. Touching it now recompiles less than 200 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-19-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-06-24xen: Import other xen/io/*.hAnthony PERARD
A Xen public header have been imported into QEMU (by f65eadb639 "xen: import ring.h from xen"), but there are other header that depends on ring.h which come from the system when building QEMU. This patch resolves the issue of having headers from the system importing a different copie of ring.h. This patch is prompt by the build issue described in the previous patch: 'Revert xen/io/ring.h of "Clean up a few header guard symbols"' ring.h and the new imported headers are moved to "include/hw/xen/interface" as those describe interfaces with a guest. The imported headers are cleaned up a bit while importing them: some part of the file that QEMU doesn't use are removed (description of how to make hypercall in grant_table.h have been removed). Other cleanup: - xen-mapcache.c and xen-legacy-backend.c don't need grant_table.h. - xenfb.c doesn't need event_channel.h. Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Paul Durrant <paul.durrant@citrix.com> Message-Id: <20190621105441.3025-3-anthony.perard@citrix.com>
2019-06-24xen-bus / xen-block: add support for event channel pollingPaul Durrant
This patch introduces a poll callback for event channel fd-s and uses this to invoke the channel callback function. To properly support polling, it is necessary for the event channel callback function to return a boolean saying whether it has done any useful work or not. Thus xen_block_dataplane_event() is modified to directly invoke xen_block_handle_requests() and the latter only returns true if it actually processes any requests. This also means that the call to qemu_bh_schedule() is moved into xen_block_complete_aio(), which is more intuitive since the only reason for doing a deferred poll of the shared ring should be because there were previously insufficient resources to fully complete a previous poll. Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Reviewed-by: Anthony PERARD <anthony.perard@citrix.com> Message-Id: <20190408151617.13025-4-paul.durrant@citrix.com> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2019-06-24xen-bus: allow AioContext to be specified for each event channelPaul Durrant
This patch adds an AioContext parameter to xen_device_bind_event_channel() and then uses aio_set_fd_handler() to set the callback rather than qemu_set_fd_handler(). Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Reviewed-by: Anthony PERARD <anthony.perard@citrix.com> Message-Id: <20190408151617.13025-3-paul.durrant@citrix.com> [Call aio_set_fd_handler() with is_external=true] Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2019-06-24xen-bus: use a separate fd for each event channelPaul Durrant
To better support use of IOThread-s it will be necessary to be able to set the AioContext for each XenEventChannel and hence it is necessary to open a separate handle to libxenevtchan for each channel. This patch stops using NotifierList for event channel callbacks, replacing that construct by a list of complete XenEventChannel structures. Each of these now has a xenevtchn_handle pointer in place of the single pointer previously held in the XenDevice structure. The individual handles are opened/closed in xen_device_bind/unbind_event_channel(), replacing the single open/close in xen_device_realize/unrealize(). NOTE: This patch does not add an AioContext parameter to xen_device_bind_event_channel(). That will be done in a subsequent patch. Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Reviewed-by: Anthony PERARD <anthony.perard@citrix.com> Message-Id: <20190408151617.13025-2-paul.durrant@citrix.com> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2019-06-12Include qemu-common.h exactly where neededMarkus Armbruster
No header includes qemu-common.h after this commit, as prescribed by qemu-common.h's file comment. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-5-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and net/tap-bsd.c fixed up]
2019-06-12Include qemu/module.h where needed, drop it from qemu-common.hMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-4-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for hw/usb/dev-hub.c hw/misc/exynos4210_rng.c hw/misc/bcm2835_rng.c hw/misc/aspeed_scu.c hw/display/virtio-vga.c hw/arm/stm32f205_soc.c; ui/cocoa.m fixed up]
2019-03-22trace-events: Shorten file names in commentsMarkus Armbruster
We spell out sub/dir/ in sub/dir/trace-events' comments pointing to source files. That's because when trace-events got split up, the comments were moved verbatim. Delete the sub/dir/ part from these comments. Gets rid of several misspellings. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190314180929.27722-3-armbru@redhat.com Message-Id: <20190314180929.27722-3-armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-02-04xen: fix xen-bus state model to allow frontend re-connectionPaul Durrant
There is a flaw in the xen-bus state model. To allow a frontend to re- connect the backend state of an online XenDevice is transitioned from Closed to InitWait, but this is currently done unilaterally which is incorrect. The backend state should remain Closed until the frontend state transitions to Initialising. This patch removes the automatic backend state transition from xen_device_backend_state_changed() and, instead, adds an extra check in xen_device_frontend_state_changed() to determine whether a frontend is trying to re-connect to a previously Closed XenDevice. Only if this is found to be the case is the backend state transitioned from Closed to InitWait. Note that this transition will be common amongst all XenDevice classes and hence xen_device_frontend_state_changed() returns immediately afterwards without calling into the XenDeviceClass frontend_changed() method. Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Acked-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2019-01-14xen: automatically create XenBlockDevice-sPaul Durrant
This patch adds create and destroy function for XenBlockDevice-s so that they can be created automatically when the Xen toolstack instantiates a new PV backend via xenstore. When the XenBlockDevice is created this way it is also necessary to create a 'drive' which matches the configuration that the Xen toolstack has written into xenstore. This is done by formulating the parameters necessary for each 'blockdev' layer of the drive and then using qmp_blockdev_add() to create the layers. Also, for compatibility with the legacy 'xen_disk' implementation, an iothread is automatically created for the new XenBlockDevice. This, like the driver layers, will be destroyed after the XenBlockDevice is unrealized. The legacy backend scan for 'qdisk' is removed by this patch, which makes the 'xen_disk' code is redundant. The code will be removed by a subsequent patch. Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Reviewed-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2019-01-14xen: add a mechanism to automatically create XenDevice-s...Paul Durrant
...that maintains compatibility with existing Xen toolstacks. Xen toolstacks instantiate PV backends by simply writing information into xenstore and expecting a backend implementation to be watching for this. This patch adds a new 'xen-backend' module to allow individual XenDevice implementations to register create and destroy functions. The creator will be called when a tool-stack instantiates a new backend in this way, and the destructor will then be called after the resulting XenDevice object is unrealized. To support this it is also necessary to add new watchers into the XenBus implementation to handle enumeration of new backends and also destruction of XenDevice-s when the toolstack sets the backend 'online' key to 0. NOTE: This patch only adds the framework. A subsequent patch will add a creator function for xen-block devices. Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Reviewed-by: Anthony Perard <anthony.perard@citrix.com> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2019-01-14xen: add implementations of xen-block connect and disconnect functions...Paul Durrant
...and wire in the dataplane. This patch adds the remaining code to make the xen-block XenDevice functional. The parameters that a block frontend expects to find are populated in the backend xenstore area, and the 'ring-ref' and 'event-channel' values specified in the frontend xenstore area are mapped/bound and used to set up the dataplane. Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Reviewed-by: Anthony Perard <anthony.perard@citrix.com> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2019-01-14xen: add event channel interface for XenDevice-sPaul Durrant
The legacy PV backend infrastructure provides functions to bind, unbind and send notifications to event channnels. Similar functionality will be required by XenDevice implementations so this patch adds the necessary support. Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Reviewed-by: Anthony Perard <anthony.perard@citrix.com> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Patch squashed with: Patch "xen: add event channel interface for XenDevice-s" makes use of the type xenevtchn_port_or_error_t, but this isn't avaiable before Xen 4.7. Also the function xen_device_bind_event_channel assign the return value of xenevtchn_bind_interdomain to channel->local_port but check the result for error with xendev->local_port. Fix by: - removing local_port from struct XenDevice as it isn't use anywere. - adding a compatibility typedef for xenevtchn_port_or_error_t for Xen 4.6 and earlier. As extra, replace the type of XenEventChannel->local_port by evtchn_port_t. Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
2019-01-14xen: add grant table interface for XenDevice-sPaul Durrant
The legacy PV backend infrastructure provides functions to map, unmap and copy pages granted by frontends. Similar functionality will be required by XenDevice implementations so this patch adds the necessary support. Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Reviewed-by: Anthony Perard <anthony.perard@citrix.com> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2019-01-14xen: add xenstore watcher infrastructurePaul Durrant
A Xen PV frontend communicates its state to the PV backend by writing to the 'state' key in the frontend area in xenstore. It is therefore necessary for a XenDevice implementation to be notified whenever the value of this key changes. This patch adds code to do this as follows: - an 'fd handler' is registered on the libxenstore handle which will be triggered whenever a 'watch' event occurs - primitives are added to xen-bus-helper to add or remove watch events - a list of Notifier objects is added to XenBus to provide a mechanism to call the appropriate 'watch handler' when its associated event occurs The xen-block implementation is extended with a 'frontend_changed' method, which calls as-yet stub 'connect' and 'disconnect' functions when the relevant frontend state transitions occur. A subsequent patch will supply a full implementation for these functions. Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Reviewed-by: Anthony Perard <anthony.perard@citrix.com> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2019-01-14xen: create xenstore areas for XenDevice-sPaul Durrant
This patch adds a new source module, xen-bus-helper.c, which builds on basic libxenstore primitives to provide functions to create (setting permissions appropriately) and destroy xenstore areas, and functions to 'printf' and 'scanf' nodes therein. The main xen-bus code then uses these primitives [1] to initialize and destroy the frontend and backend areas for a XenDevice during realize and unrealize respectively. The 'xen-block' implementation is extended with a 'get_name' method that returns the VBD number. This number is required to 'name' the xenstore areas. NOTE: An exit handler is also added to make sure the xenstore areas are cleaned up if QEMU terminates without devices being unrealized. [1] The 'scanf' functions are actually not yet needed, but they will be needed by code delivered in subsequent patches. Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Reviewed-by: Anthony Perard <anthony.perard@citrix.com> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2019-01-14xen: introduce new 'XenBus' and 'XenDevice' object hierarchyPaul Durrant
This patch adds the basic boilerplate for a 'XenBus' object that will act as a parent to 'XenDevice' PV backends. A new 'XenBridge' object is also added to connect XenBus to the system bus. The XenBus object is instantiated by a new xen_bus_init() function called from the same sites as the legacy xen_be_init() function. Subsequent patches will flesh-out the functionality of these objects. Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Reviewed-by: Anthony Perard <anthony.perard@citrix.com> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2019-01-14xen: re-name XenDevice to XenLegacyDevice...Paul Durrant
...and xen_backend.h to xen-legacy-backend.h Rather than attempting to convert the existing backend infrastructure to be QOM compliant (which would be hard to do in an incremental fashion), subsequent patches will introduce a completely new framework for Xen PV backends. Hence it is necessary to re-name parts of existing code to avoid name clashes. The re-named 'legacy' infrastructure will be removed once all backends have been ported to the new framework. This patch is purely cosmetic. No functional change. Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Acked-by: Anthony Perard <anthony.perard@citrix.com> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2019-01-14xen/pt: allow passthrough of devices with bogus interrupt pinZhao Yan
For some pci device, even its PCI_INTERRUPT_PIN is not 0, it actually doesn't support INTx mode, so its machine irq read from host sysfs is 0. In that case, report PCI_INTERRUPT_PIN as 0 to guest and let passthrough continue. Reviewed-by: Roger Pau Monné <roger.pau@citrix.com> Signed-off-by: Zhao Yan <yan.y.zhao@intel.com> Acked-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2019-01-14hw/xen/xen_pt_graphics: Don't trust the BIOS ROM contents so muchPeter Maydell
Coverity (CID 796599) points out that xen_pt_setup_vga() trusts the rom->size field in the BIOS ROM from a PCI passthrough VGA device, and uses it as an index into the memory which contains the BIOS image. A corrupt BIOS ROM could therefore cause us to index off the end of the buffer. Check that the size is within bounds before we use it. We are also trusting the pcioffset field, and assuming that the whole rom_header is present; Coverity doesn't notice these, but check them too. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2019-01-11Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
* HAX support for Linux hosts (Alejandro) * esp bugfixes (Guenter) * Windows build cleanup (Marc-André) * checkpatch logic improvements (Paolo) * coalesced range bugfix (Paolo) * switch testsuite to TAP (Paolo) * QTAILQ rewrite (Paolo) * block/iscsi.c cancellation fixes (Stefan) * improve selection of the default accelerator (Thomas) # gpg: Signature made Fri 11 Jan 2019 14:47:40 GMT # gpg: using RSA key BFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (34 commits) avoid TABs in files that only contain a few remove space-tab sequences scripts: add script to convert multiline comments into 4-line format hw/watchdog/wdt_i6300esb: remove a unnecessary comment checkpatch: warn about qemu/queue.h head structs that are not typedef-ed qemu/queue.h: simplify reverse access to QTAILQ qemu/queue.h: reimplement QTAILQ without pointer-to-pointers qemu/queue.h: remove Q_TAILQ_{HEAD,ENTRY} qemu/queue.h: typedef QTAILQ heads qemu/queue.h: leave head structs anonymous unless necessary vfio: make vfio_address_spaces static qemu/queue.h: do not access tqe_prev directly test: replace gtester with a TAP driver test: execute g_test_run when tests are skipped qga: drop < Vista compatibility build-sys: build with Vista API by default build-sys: move windows defines in osdep.h header build-sys: don't include windows.h, osdep.h does it scsi: esp: Defer command completion until previous interrupts have been handled esp-pci: Fix status register write erase control ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-11avoid TABs in files that only contain a fewPaolo Bonzini
Most files that have TABs only contain a handful of them. Change them to spaces so that we don't confuse people. disas, standard-headers, linux-headers and libdecnumber are imported from other projects and probably should be exempted from the check. Outside those, after this patch the following files still contain both 8-space and TAB sequences at the beginning of the line. Many of them have a majority of TABs, or were initially committed with all tabs. bsd-user/i386/target_syscall.h bsd-user/x86_64/target_syscall.h crypto/aes.c hw/audio/fmopl.c hw/audio/fmopl.h hw/block/tc58128.c hw/display/cirrus_vga.c hw/display/xenfb.c hw/dma/etraxfs_dma.c hw/intc/sh_intc.c hw/misc/mst_fpga.c hw/net/pcnet.c hw/sh4/sh7750.c hw/timer/m48t59.c hw/timer/sh_timer.c include/crypto/aes.h include/disas/bfd.h include/hw/sh4/sh.h libdecnumber/decNumber.c linux-headers/asm-generic/unistd.h linux-headers/linux/kvm.h linux-user/alpha/target_syscall.h linux-user/arm/nwfpe/double_cpdo.c linux-user/arm/nwfpe/fpa11_cpdt.c linux-user/arm/nwfpe/fpa11_cprt.c linux-user/arm/nwfpe/fpa11.h linux-user/flat.h linux-user/flatload.c linux-user/i386/target_syscall.h linux-user/ppc/target_syscall.h linux-user/sparc/target_syscall.h linux-user/syscall.c linux-user/syscall_defs.h linux-user/x86_64/target_syscall.h slirp/cksum.c slirp/if.c slirp/ip.h slirp/ip_icmp.c slirp/ip_icmp.h slirp/ip_input.c slirp/ip_output.c slirp/mbuf.c slirp/misc.c slirp/sbuf.c slirp/socket.c slirp/socket.h slirp/tcp_input.c slirp/tcpip.h slirp/tcp_output.c slirp/tcp_subr.c slirp/tcp_timer.c slirp/tftp.c slirp/udp.c slirp/udp.h target/cris/cpu.h target/cris/mmu.c target/cris/op_helper.c target/sh4/helper.c target/sh4/op_helper.c target/sh4/translate.c tcg/sparc/tcg-target.inc.c tests/tcg/cris/check_addo.c tests/tcg/cris/check_moveq.c tests/tcg/cris/check_swap.c tests/tcg/multiarch/test-mmap.c ui/vnc-enc-hextile-template.h ui/vnc-enc-zywrle.h util/envlist.c util/readline.c The following have only TABs: bsd-user/i386/target_signal.h bsd-user/sparc64/target_signal.h bsd-user/sparc64/target_syscall.h bsd-user/sparc/target_signal.h bsd-user/sparc/target_syscall.h bsd-user/x86_64/target_signal.h crypto/desrfb.c hw/audio/intel-hda-defs.h hw/core/uboot_image.h hw/sh4/sh7750_regnames.c hw/sh4/sh7750_regs.h include/hw/cris/etraxfs_dma.h linux-user/alpha/termbits.h linux-user/arm/nwfpe/fpopcode.h linux-user/arm/nwfpe/fpsr.h linux-user/arm/syscall_nr.h linux-user/arm/target_signal.h linux-user/cris/target_signal.h linux-user/i386/target_signal.h linux-user/linux_loop.h linux-user/m68k/target_signal.h linux-user/microblaze/target_signal.h linux-user/mips64/target_signal.h linux-user/mips/target_signal.h linux-user/mips/target_syscall.h linux-user/mips/termbits.h linux-user/ppc/target_signal.h linux-user/sh4/target_signal.h linux-user/sh4/termbits.h linux-user/sparc64/target_syscall.h linux-user/sparc/target_signal.h linux-user/x86_64/target_signal.h linux-user/x86_64/termbits.h pc-bios/optionrom/optionrom.h slirp/mbuf.h slirp/misc.h slirp/sbuf.h slirp/tcp.h slirp/tcp_timer.h slirp/tcp_var.h target/i386/svm.h target/sparc/asi.h target/xtensa/core-dc232b/xtensa-modules.inc.c target/xtensa/core-dc233c/xtensa-modules.inc.c target/xtensa/core-de212/core-isa.h target/xtensa/core-de212/xtensa-modules.inc.c target/xtensa/core-fsf/xtensa-modules.inc.c target/xtensa/core-sample_controller/core-isa.h target/xtensa/core-sample_controller/xtensa-modules.inc.c target/xtensa/core-test_kc705_be/core-isa.h target/xtensa/core-test_kc705_be/xtensa-modules.inc.c tests/tcg/cris/check_abs.c tests/tcg/cris/check_addc.c tests/tcg/cris/check_addcm.c tests/tcg/cris/check_addoq.c tests/tcg/cris/check_bound.c tests/tcg/cris/check_ftag.c tests/tcg/cris/check_int64.c tests/tcg/cris/check_lz.c tests/tcg/cris/check_openpf5.c tests/tcg/cris/check_sigalrm.c tests/tcg/cris/crisutils.h tests/tcg/cris/sys.c tests/tcg/i386/test-i386-ssse3.c ui/vgafont.h Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20181213223737.11793-3-pbonzini@redhat.com> Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Acked-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Eric Blake <eblake@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-11qemu/queue.h: leave head structs anonymous unless necessaryPaolo Bonzini
Most list head structs need not be given a name. In most cases the name is given just in case one is going to use QTAILQ_LAST, QTAILQ_PREV or reverse iteration, but this does not apply to lists of other kinds, and even for QTAILQ in practice this is only rarely needed. In addition, we will soon reimplement those macros completely so that they do not need a name for the head struct. So clean up everything, not giving a name except in the rare case where it is necessary. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-09machine: Use shorter format for GlobalProperty arraysEduardo Habkost
Instead of verbose arrays with 4 lines for each entry, make each entry take only one line. This makes long arrays that couldn't fit in the screen become short and readable. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20190107193020.21744-4-ehabkost@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-01-07machine: move compat properties out of globalsMarc-André Lureau
Move the compat arrays inside functions that use them. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com>
2019-01-07hw: apply accel compat properties without touching globalsMarc-André Lureau
Instead of registering compat properties as globals, let's keep them in their own array, to avoid mixing with user globals. Introduce object_apply_global_props() function, to apply compatibility properties from a GPtrArray. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com>
2018-12-13xen_backend: remove xen_sysdev_init() functionMao Zhongyi
The init function doesn't do anything at all, so we just omit it. Cc: sstabellini@kernel.org Cc: anthony.perard@citrix.com Cc: xen-devel@lists.xenproject.org Cc: peter.maydell@linaro.org Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com> Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Acked-by: Anthony PERARD <anthony.perard@citrix.com> Message-id: 20181130093852.20739-21-maozhongyi@cmss.chinamobile.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-26xen: Use the PCI_DEVICE macroPhilippe Mathieu-Daudé
TYPE_XEN_PT_DEVICE is a subclass of TYPE_PCI_DEVICE, the clean way to access the PCIDevice pointer is using the PCI_DEVICE() macro. Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> Acked-by: Anthony PERARD <anthony.perard@citrix.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20180705155811.20366-4-f4bug@amsat.org> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2018-10-19xen/pt: Fix incomplete conversion to realize()Markus Armbruster
The conversion of "xen-pci-passthrough" to realize() (commit 5a11d0f7549, v2.6.0) neglected to convert the xen_pt_config_init() error path. If xen_pt_config_init() fails, xen_pt_realize() reports the error, then returns success without completing its job. I don't know the exact impact, but it can't be good. Belatedly convert the error path. Fixes: 5a11d0f7549e24a10e178a9dc8ff5e698031d9a6 Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Anthony Perard <anthony.perard@citrix.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Anthony PERARD <anthony.perard@citrix.com> Message-Id: <20181017082702.5581-17-armbru@redhat.com>
2018-06-22xen: Don't use memory_region_init_ram_nomigrate() in ↵Peter Maydell
pci_assign_dev_load_option_rom() The xen pci_assign_dev_load_option_rom() currently creates a RAM memory region with memory_region_init_ram_nomigrate(), and then manually registers it with vmstate_register_ram(). In fact for its only callsite, the 'owner' pointer we use for the init call and the '&dev->qdev' pointer we use for the vmstate_register_ram() call refer to the same object. Simplify the function to only take a pointer to the device once instead of twice, and use memory_region_init_ram() which automatically does the vmstate register for us. Acked-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-01Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
* Linux header upgrade (Peter) * firmware.json definition (Laszlo) * IPMI migration fix (Corey) * QOM improvements (Alexey, Philippe, me) * Memory API cleanups (Jay, me, Tristan, Peter) * WHPX fixes and improvements (Lucian) * Chardev fixes (Marc-André) * IOMMU documentation improvements (Peter) * Coverity fixes (Peter, Philippe) * Include cleanup (Philippe) * -clock deprecation (Thomas) * Disable -sandbox unless CONFIG_SECCOMP (Yi Min Zhao) * Configurability improvements (me) # gpg: Signature made Fri 01 Jun 2018 17:42:13 BST # gpg: using RSA key BFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (56 commits) hw: make virtio devices configurable via default-configs/ hw: allow compiling out SCSI memory: Make operations using MemoryRegionIoeventfd struct pass by pointer. char: Remove unwanted crlf conversion qdev: Remove DeviceClass::init() and ::exit() qdev: Simplify the SysBusDeviceClass::init path hw/i2c: Use DeviceClass::realize instead of I2CSlaveClass::init hw/i2c/smbus: Use DeviceClass::realize instead of SMBusDeviceClass::init target/i386/kvm.c: Remove compatibility shim for KVM_HINTS_REALTIME Update Linux headers to 4.17-rc6 target/i386/kvm.c: Handle renaming of KVM_HINTS_DEDICATED scripts/update-linux-headers: Handle kernel license no longer being one file scripts/update-linux-headers: Handle __aligned_u64 virtio-gpu-3d: Define VIRTIO_GPU_CAPSET_VIRGL2 elsewhere gdbstub: Prevent fd leakage docs/interop: add "firmware.json" ipmi: Use proper struct reference for KCS vmstate vmstate: Add a VSTRUCT type tcg: remove softfloat from --disable-tcg builds qemu-options: Mark the non-functional -clock option as deprecated ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-01hw: Do not include "sysemu/block-backend.h" if it is not necessaryPhilippe Mathieu-Daudé
Remove those unneeded includes to speed up the compilation process a little bit. (Continue 7eceff5b5a1fa cleanup) Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180528232719.4721-13-f4bug@amsat.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-05-31Make MemoryRegion valid.accepts callback take a MemTxAttrs argumentPeter Maydell
As part of plumbing MemTxAttrs down to the IOMMU translate method, add MemTxAttrs as an argument to the MemoryRegion valid.accepts callback. We'll need this for subpage_accepts(). We could take the approach we used with the read and write callbacks and add new a new _with_attrs version, but since there are so few implementations of the accepts hook we just change them all. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180521140402.23318-9-peter.maydell@linaro.org
2018-05-22xen_backend: make the xen_feature_grant_copy flag privatePaul Durrant
There is no longer any use of this flag outside of the xen_backend code. Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Acked-by: Anthony Perard <anthony.perard@citrix.com> Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
2018-05-22xen_backend: add an emulation of grant copyPaul Durrant
Not all Xen environments support the xengnttab_grant_copy() operation. E.g. where the OS is FreeBSD or Xen is older than 4.8.0. This patch introduces an emulation of that operation using xengnttab_map_domain_grant_refs() and memcpy() for those environments. Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Acked-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
2018-05-22xen_backend: add grant table helpersPaul Durrant
This patch adds grant table helper functions to the xen_backend code to localize error reporting and use of xen_domid. The patch also defers the call to xengnttab_open() until just before the initialise method in XenDevOps is invoked. This method is responsible for mapping the shared ring. No prior method requires access to the grant table. Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Acked-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
2018-05-18xen_pt: Present the size of 64 bit BARs correctlyRoss Lagerwall
The full size of the BAR is stored in the lower PCIIORegion.size. The upper PCIIORegion.size is 0. Calculate the size of the upper half correctly from the lower half otherwise the size read by the guest will be incorrect. Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com> Acked-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
2018-05-18xen/pt: use address_space_memory object for memory region hooksIgor Druzhinin
Commit 99605175c (xen-pt: Fix PCI devices re-attach failed) introduced a subtle bug. As soon as the guest switches off Bus Mastering on the device it immediately causes all the BARs be unmapped due to the DMA address space of the device being changed. This is undesired behavior because the guest may try to communicate with the device after that which triggers the following errors in the logs: [00:05.0] xen_pt_bar_read: Error: Should not read BAR through QEMU. @0x0000000000000200 [00:05.0] xen_pt_bar_write: Error: Should not write BAR through QEMU. @0x0000000000000200 The issue that the original patch tried to workaround (uneven number of region_add/del calls on device attach/detach) was fixed in d25836cafd (memory: do explicit cleanup when remove listeners). Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com> Reported-by: Ross Lagerwall <ross.lagerwall@citrix.com> Acked-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-19 04:23:35 +0000