aboutsummaryrefslogtreecommitdiff
path: root/hw/xen/xen_pt.c
AgeCommit message (Collapse)Author
2023-06-28exec/memory: Add symbolic value for memory listener priority for accelIsaku Yamahata
Add MEMORY_LISTNER_PRIORITY_ACCEL for the symbolic value for the memory listener to replace the hard-coded value 10 for accel. No functional change intended. Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <feebe423becc6e2aa375f59f6abce9a85bc15abb.1687279702.git.isaku.yamahata@intel.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-04-21pci: avoid accessing slot_reserved_mask directly outside of pci.cChuck Zmudzinski
This patch provides accessor functions as replacements for direct access to slot_reserved_mask according to the comment at the top of include/hw/pci/pci_bus.h which advises that data structures for PCIBus should not be directly accessed but instead be accessed using accessor functions in pci.h. Three accessor functions can conveniently replace all direct accesses of slot_reserved_mask. With this patch, the new accessor functions are used in hw/sparc64/sun4u.c and hw/xen/xen_pt.c and pci_bus.h is removed from the included header files of the same two files. No functional change intended. Signed-off-by: Chuck Zmudzinski <brchuckz@aol.com> Message-Id: <b1b7f134883cbc83e455abbe5ee225c71aa0e8d0.1678888385.git.brchuckz@aol.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> [sun4u]
2023-03-07hw/xen: Rename xen_common.h to xen_native.hDavid Woodhouse
This header is now only for native Xen code, not PV backends that may be used in Xen emulation. Since the toolstack libraries may depend on the specific version of Xen headers that they pull in (and will set the __XEN_TOOLS__ macro to enable internal definitions that they depend on), the rule is that xen_native.h (and thus the toolstack library headers) must be included *before* any of the headers in include/hw/xen/interface. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Paul Durrant <paul@xen.org>
2023-03-06xen/pt: reserve PCI slot 2 for Intel igd-passthruChuck Zmudzinski
Intel specifies that the Intel IGD must occupy slot 2 on the PCI bus, as noted in docs/igd-assign.txt in the Qemu source code. Currently, when the xl toolstack is used to configure a Xen HVM guest with Intel IGD passthrough to the guest with the Qemu upstream device model, a Qemu emulated PCI device will occupy slot 2 and the Intel IGD will occupy a different slot. This problem often prevents the guest from booting. The only available workarounds are not good: Configure Xen HVM guests to use the old and no longer maintained Qemu traditional device model available from xenbits.xen.org which does reserve slot 2 for the Intel IGD or use the "pc" machine type instead of the "xenfv" machine type and add the xen platform device at slot 3 using a command line option instead of patching qemu to fix the "xenfv" machine type directly. The second workaround causes some degredation in startup performance such as a longer boot time and reduced resolution of the grub menu that is displayed on the monitor. This patch avoids that reduced startup performance when using the Qemu upstream device model for Xen HVM guests configured with the igd-passthru=on option. To implement this feature in the Qemu upstream device model for Xen HVM guests, introduce the following new functions, types, and macros: * XEN_PT_DEVICE_CLASS declaration, based on the existing TYPE_XEN_PT_DEVICE * XEN_PT_DEVICE_GET_CLASS macro helper function for XEN_PT_DEVICE_CLASS * typedef XenPTQdevRealize function pointer * XEN_PCI_IGD_SLOT_MASK, the value of slot_reserved_mask to reserve slot 2 * xen_igd_reserve_slot and xen_igd_clear_slot functions Michael Tsirkin: * Introduce XEN_PCI_IGD_DOMAIN, XEN_PCI_IGD_BUS, XEN_PCI_IGD_DEV, and XEN_PCI_IGD_FN - use them to compute the value of XEN_PCI_IGD_SLOT_MASK The new xen_igd_reserve_slot function uses the existing slot_reserved_mask member of PCIBus to reserve PCI slot 2 for Xen HVM guests configured using the xl toolstack with the gfx_passthru option enabled, which sets the igd-passthru=on option to Qemu for the Xen HVM machine type. The new xen_igd_reserve_slot function also needs to be implemented in hw/xen/xen_pt_stub.c to prevent FTBFS during the link stage for the case when Qemu is configured with --enable-xen and --disable-xen-pci-passthrough, in which case it does nothing. The new xen_igd_clear_slot function overrides qdev->realize of the parent PCI device class to enable the Intel IGD to occupy slot 2 on the PCI bus since slot 2 was reserved by xen_igd_reserve_slot when the PCI bus was created in hw/i386/pc_piix.c for the case when igd-passthru=on. Move the call to xen_host_pci_device_get, and the associated error handling, from xen_pt_realize to the new xen_igd_clear_slot function to initialize the device class and vendor values which enables the checks for the Intel IGD to succeed. The verification that the host device is an Intel IGD to be passed through is done by checking the domain, bus, slot, and function values as well as by checking that gfx_passthru is enabled, the device class is VGA, and the device vendor in Intel. Signed-off-by: Chuck Zmudzinski <brchuckz@aol.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Message-Id: <b1b4a21fe9a600b1322742dda55a40e9961daa57.1674346505.git.brchuckz@aol.com> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2023-01-18bulk: Rename TARGET_FMT_plx -> HWADDR_FMT_plxPhilippe Mathieu-Daudé
The 'hwaddr' type is defined in "exec/hwaddr.h" as: hwaddr is the type of a physical address (its size can be different from 'target_ulong'). All definitions use the 'HWADDR_' prefix, except TARGET_FMT_plx: $ fgrep define include/exec/hwaddr.h #define HWADDR_H #define HWADDR_BITS 64 #define HWADDR_MAX UINT64_MAX #define TARGET_FMT_plx "%016" PRIx64 ^^^^^^ #define HWADDR_PRId PRId64 #define HWADDR_PRIi PRIi64 #define HWADDR_PRIo PRIo64 #define HWADDR_PRIu PRIu64 #define HWADDR_PRIx PRIx64 #define HWADDR_PRIX PRIX64 Since hwaddr's size can be *different* from target_ulong, it is very confusing to read one of its format using the 'TARGET_FMT_' prefix, normally used for the target_long / target_ulong types: $ fgrep TARGET_FMT_ include/exec/cpu-defs.h #define TARGET_FMT_lx "%08x" #define TARGET_FMT_ld "%d" #define TARGET_FMT_lu "%u" #define TARGET_FMT_lx "%016" PRIx64 #define TARGET_FMT_ld "%" PRId64 #define TARGET_FMT_lu "%" PRIu64 Apparently this format was missed during commit a8170e5e97 ("Rename target_phys_addr_t to hwaddr"), so complete it by doing a bulk-rename with: $ sed -i -e s/TARGET_FMT_plx/HWADDR_FMT_plx/g $(git grep -l TARGET_FMT_plx) Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230110212947.34557-1-philmd@linaro.org> [thuth: Fix some warnings from checkpatch.pl along the way] Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-05-12hw/xen/xen_pt: Resolve igd_passthrough_isa_bridge_create() indirectionBernhard Beschow
Now that igd_passthrough_isa_bridge_create() is implemented within the xen context it may use Xen* data types directly and become xen_igd_passthrough_isa_bridge_create(). This resolves an indirection. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Acked-by: Anthony PERARD <anthony.perard@citrix.com> Message-Id: <20220326165825.30794-3-shentey@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-05-12hw/xen/xen_pt: Confine igd-passthrough-isa-bridge to XENBernhard Beschow
igd-passthrough-isa-bridge is only requested in xen_pt but was implemented in pc_piix.c. This caused xen_pt to dependend on i386/pc which is hereby resolved. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Acked-by: Anthony PERARD <anthony.perard@citrix.com> Message-Id: <20220326165825.30794-2-shentey@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-11-01pci: Export pci_for_each_device_under_bus*()Peter Xu
They're actually more commonly used than the helper without _under_bus, because most callers do have the pci bus on hand. After exporting we can switch a lot of the call sites to use these two helpers. Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20211028043129.38871-3-peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au>
2021-09-30memory: Name all the memory listenersPeter Xu
Provide a name field for all the memory listeners. It can be used to identify which memory listener is which. Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Message-Id: <20210817013553.30584-2-peterx@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-05-02Do not include exec/address-spaces.h if it's not really necessaryThomas Huth
Stop including exec/address-spaces.h in files that don't need it. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210416171314.2074665-5-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-12-18qdev: Move softmmu properties to qdev-properties-system.hEduardo Habkost
Move the property types and property macros implemented in qdev-properties-system.c to a new qdev-properties-system.h header. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20201211220529.2290218-16-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-12-13hw/xen: Don't use '#' flag of printf formatXinhao Zhang
Fix code style. Don't use '#' flag of printf format ('%#') in format strings, use '0x' prefix instead Signed-off-by: Xinhao Zhang <zhangxinhao1@huawei.com> Signed-off-by: Kai Deng <dengkai1@huawei.com> Message-Id: <20201104133709.3326630-1-zhangxinhao1@huawei.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-07-10xen: Use ERRP_GUARD()Vladimir Sementsov-Ogievskiy
If we want to check error after errp-function call, we need to introduce local_err and then propagate it to errp. Instead, use the ERRP_GUARD() macro, benefits are: 1. No need of explicit error_propagate call 2. No need of explicit local_err variable: use errp directly 3. ERRP_GUARD() leaves errp as is if it's not NULL or &error_fatal, this means that we don't break error_abort (we'll abort on error_set, not on error_propagate) If we want to add some info to errp (by error_prepend() or error_append_hint()), we must use the ERRP_GUARD() macro. Otherwise, this info will not be added when errp == &error_fatal (the program will exit prior to the error_append_hint() or error_prepend() call). No such cases are being fixed here. This commit is generated by command sed -n '/^X86 Xen CPUs$/,/^$/{s/^F: //p}' MAINTAINERS | \ xargs git ls-files | grep '\.[hc]$' | \ xargs spatch \ --sp-file scripts/coccinelle/errp-guard.cocci \ --macro-file scripts/cocci-macro-file.h \ --in-place --no-show-diff --max-width 80 Reported-by: Kevin Wolf <kwolf@redhat.com> Reported-by: Greg Kurz <groug@kaod.org> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200707165037.1026246-9-armbru@redhat.com> [ERRP_AUTO_PROPAGATE() renamed to ERRP_GUARD(), and auto-propagated-errp.cocci to errp-guard.cocci. Commit message tweaked again.]
2020-06-12xen: fix build without pci passthroughAnthony PERARD
Xen PCI passthrough support may not be available and thus the global variable "has_igd_gfx_passthru" might be compiled out. Common code should not access it in that case. Unfortunately, we can't use CONFIG_XEN_PCI_PASSTHROUGH directly in xen-common.c so this patch instead move access to the has_igd_gfx_passthru variable via function and those functions are also implemented as stubs. The stubs will be used when QEMU is built without passthrough support. Now, when one will want to enable igd-passthru via the -machine property, they will get an error message if QEMU is built without passthrough support. Fixes: 46472d82322d0 ('xen: convert "-machine igd-passthru" to an accelerator property') Reported-by: Roger Pau Monné <roger.pau@citrix.com> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Message-Id: <20200603160442.3151170-1-anthony.perard@citrix.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-04-29xen/pt: Fix flawed conversion to realize()Markus Armbruster
The conversion of xen_pt_initfn() to xen_pt_realize() blindly replaced XEN_PT_ERR() by error_setg(). Several error conditions that did not fail xen_pt_initfn() now fail xen_pt_realize(). Unsurprisingly, the cleanup on these errors looks highly suspicious. Revert the inappropriate replacements. Fixes: 5a11d0f7549e24a10e178a9dc8ff5e698031d9a6 Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Anthony Perard <anthony.perard@citrix.com> Cc: Paul Durrant <paul@xen.org> Cc: xen-devel@lists.xenproject.org Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Paul Durrant <paul@xen.org> Message-Id: <20200422130719.28225-10-armbru@redhat.com>
2020-01-24qdev: set properties with device_class_set_props()Marc-André Lureau
The following patch will need to handle properties registration during class_init time. Let's use a device_class_set_props() setter. spatch --macro-file scripts/cocci-macro-file.h --sp-file ./scripts/coccinelle/qdev-set-props.cocci --keep-comments --in-place --dir . @@ typedef DeviceClass; DeviceClass *d; expression val; @@ - d->props = val + device_class_set_props(d, val) Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20200110153039.1379601-20-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-12-17xen: convert "-machine igd-passthru" to an accelerator propertyPaolo Bonzini
The first machine property to fall is Xen's Intel integrated graphics passthrough. The "-machine igd-passthru" option does not set anymore a property on the machine object, but desugars to a GlobalProperty on accelerator objects. The setter is very simple, since the value ends up in a global variable, so this patch also provides an example before the more complicated cases that follow it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-08-16Include hw/qdev-properties.h lessMarkus Armbruster
In my "build everything" tree, changing hw/qdev-properties.h triggers a recompile of some 2700 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). Many places including hw/qdev-properties.h (directly or via hw/qdev.h) actually need only hw/qdev-core.h. Include hw/qdev-core.h there instead. hw/qdev.h is actually pointless: all it does is include hw/qdev-core.h and hw/qdev-properties.h, which in turn includes hw/qdev-core.h. Replace the remaining uses of hw/qdev.h by hw/qdev-properties.h. While there, delete a few superfluous inclusions of hw/qdev-core.h. Touching hw/qdev-properties.h now recompiles some 1200 objects. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Daniel P. Berrangé" <berrange@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20190812052359.30071-22-armbru@redhat.com>
2019-01-14xen: re-name XenDevice to XenLegacyDevice...Paul Durrant
...and xen_backend.h to xen-legacy-backend.h Rather than attempting to convert the existing backend infrastructure to be QOM compliant (which would be hard to do in an incremental fashion), subsequent patches will introduce a completely new framework for Xen PV backends. Hence it is necessary to re-name parts of existing code to avoid name clashes. The re-named 'legacy' infrastructure will be removed once all backends have been ported to the new framework. This patch is purely cosmetic. No functional change. Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Acked-by: Anthony Perard <anthony.perard@citrix.com> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2019-01-14xen/pt: allow passthrough of devices with bogus interrupt pinZhao Yan
For some pci device, even its PCI_INTERRUPT_PIN is not 0, it actually doesn't support INTx mode, so its machine irq read from host sysfs is 0. In that case, report PCI_INTERRUPT_PIN as 0 to guest and let passthrough continue. Reviewed-by: Roger Pau Monné <roger.pau@citrix.com> Signed-off-by: Zhao Yan <yan.y.zhao@intel.com> Acked-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
2018-10-19xen/pt: Fix incomplete conversion to realize()Markus Armbruster
The conversion of "xen-pci-passthrough" to realize() (commit 5a11d0f7549, v2.6.0) neglected to convert the xen_pt_config_init() error path. If xen_pt_config_init() fails, xen_pt_realize() reports the error, then returns success without completing its job. I don't know the exact impact, but it can't be good. Belatedly convert the error path. Fixes: 5a11d0f7549e24a10e178a9dc8ff5e698031d9a6 Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Anthony Perard <anthony.perard@citrix.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Anthony PERARD <anthony.perard@citrix.com> Message-Id: <20181017082702.5581-17-armbru@redhat.com>
2018-05-18xen/pt: use address_space_memory object for memory region hooksIgor Druzhinin
Commit 99605175c (xen-pt: Fix PCI devices re-attach failed) introduced a subtle bug. As soon as the guest switches off Bus Mastering on the device it immediately causes all the BARs be unmapped due to the DMA address space of the device being changed. This is undesired behavior because the guest may try to communicate with the device after that which triggers the following errors in the logs: [00:05.0] xen_pt_bar_read: Error: Should not read BAR through QEMU. @0x0000000000000200 [00:05.0] xen_pt_bar_write: Error: Should not write BAR through QEMU. @0x0000000000000200 The issue that the original patch tried to workaround (uneven number of region_add/del calls on device attach/detach) was fixed in d25836cafd (memory: do explicit cleanup when remove listeners). Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com> Reported-by: Ross Lagerwall <ross.lagerwall@citrix.com> Acked-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
2018-02-08pci: removed the is_express field since a uniform interface was insertedYoni Bettan
according to Eduardo Habkost's commit fd3b02c889 all PCIEs now implement INTERFACE_PCIE_DEVICE so we don't need is_express field anymore. Devices that implements only INTERFACE_PCIE_DEVICE (is_express == 1) or devices that implements only INTERFACE_CONVENTIONAL_PCI_DEVICE (is_express == 0) where not affected by the change. The only devices that were affected are those that are hybrid and also had (is_express == 1) - therefor only: - hw/vfio/pci.c - hw/usb/hcd-xhci.c - hw/xen/xen_pt.c For those 3 I made sure that QEMU_PCI_CAP_EXPRESS is on in instance_init() Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Yoni Bettan <ybettan@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-01-11Merge remote-tracking branch 'origin/master' into HEADMichael S. Tsirkin
Resolve conflicts around apb. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-12-14xen/pt: Set is_express to avoid out-of-bounds writeSimon Gaiser
The passed-through device might be an express device. In this case the old code allocated a too small emulated config space in pci_config_alloc() since pci_config_size() returned the size for a non-express device. This leads to an out-of-bound write in xen_pt_config_reg_init(), which sometimes results in crashes. So set is_express as already done for KVM in vfio-pci. Shortened ASan report: ==17512==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x611000041648 at pc 0x55e0fdac51ff bp 0x7ffe4af07410 sp 0x7ffe4af07408 WRITE of size 2 at 0x611000041648 thread T0 #0 0x55e0fdac51fe in memcpy /usr/include/x86_64-linux-gnu/bits/string3.h:53 #1 0x55e0fdac51fe in stw_he_p include/qemu/bswap.h:330 #2 0x55e0fdac51fe in stw_le_p include/qemu/bswap.h:379 #3 0x55e0fdac51fe in pci_set_word include/hw/pci/pci.h:490 #4 0x55e0fdac51fe in xen_pt_config_reg_init hw/xen/xen_pt_config_init.c:1991 #5 0x55e0fdac51fe in xen_pt_config_init hw/xen/xen_pt_config_init.c:2067 #6 0x55e0fdabcf4d in xen_pt_realize hw/xen/xen_pt.c:830 #7 0x55e0fdf59666 in pci_qdev_realize hw/pci/pci.c:2034 #8 0x55e0fdda7d3d in device_set_realized hw/core/qdev.c:914 [...] 0x611000041648 is located 8 bytes to the right of 256-byte region [0x611000041540,0x611000041640) allocated by thread T0 here: #0 0x7ff596a94bb8 in __interceptor_calloc (/usr/lib/x86_64-linux-gnu/libasan.so.4+0xd9bb8) #1 0x7ff57da66580 in g_malloc0 (/lib/x86_64-linux-gnu/libglib-2.0.so.0+0x50580) #2 0x55e0fdda7d3d in device_set_realized hw/core/qdev.c:914 [...] Signed-off-by: Simon Gaiser <hw42@ipsumj.de> Acked-by: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
2017-12-05pci: Eliminate redundant PCIDevice::bus pointerDavid Gibson
The bus pointer in PCIDevice is basically redundant with QOM information. It's always initialized to the qdev_get_parent_bus(), the only difference is the type. Therefore this patch eliminates the field, instead creating a pci_get_bus() helper to do the type mangling to derive it conveniently from the QOM Device object underneath. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com>
2017-12-05pci: Add pci_dev_bus_num() helperDavid Gibson
A fair proportion of the users of pci_bus_num() want to get the bus number on a specific device, so first have to look up the bus from the device then call it. This adds a helper to do that (since we're going to make looking up the bus slightly more verbose). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com>
2017-10-15xen/pt: Mark TYPE_XEN_PT_DEVICE as hybridEduardo Habkost
xen-pt doesn't set the is_express field, but is supposed to be able to handle PCI Express devices too. Mark it as hybrid. Suggested-by: Jan Beulich <JBeulich@suse.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-10-15pci: Add INTERFACE_CONVENTIONAL_PCI_DEVICE to Conventional PCI devicesEduardo Habkost
Add INTERFACE_CONVENTIONAL_PCI_DEVICE to all direct subtypes of TYPE_PCI_DEVICE, except: 1) The ones that already have INTERFACE_PCIE_DEVICE set: * base-xhci * e1000e * nvme * pvscsi * vfio-pci * virtio-pci * vmxnet3 2) base-pci-bridge Not all PCI bridges are Conventional PCI devices, so INTERFACE_CONVENTIONAL_PCI_DEVICE is added only to the subtypes that are actually Conventional PCI: * dec-21154-p2p-bridge * i82801b11-bridge * pbm-bridge * pci-bridge The direct subtypes of base-pci-bridge not touched by this patch are: * xilinx-pcie-root: Already marked as PCIe-only. * pcie-pci-bridge: Already marked as PCIe-only. * pcie-port: all non-abstract subtypes of pcie-port are already marked as PCIe-only devices. 3) megasas-base Not all megasas devices are Conventional PCI devices, so the interface names are added to the subclasses registered by megasas_register_types(), according to information in the megasas_devices[] array. "megasas-gen2" already implements INTERFACE_PCIE_DEVICE, so add INTERFACE_CONVENTIONAL_PCI_DEVICE only to "megasas". Acked-by: Alberto Garcia <berto@igalia.com> Acked-by: John Snow <jsnow@redhat.com> Acked-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-07-07xen/pt: Fixup addr validation in xen_pt_pci_config_access_checkAnoob Soman
xen_pt_pci_config_access_check checks if addr >= 0xFF. 0xFF is a valid address and should not be ignored. Signed-off-by: Anoob Soman <anoob.soman@citrix.com> Acked-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
2016-08-04Xen PCI passthrough: fix passthrough failure when no interrupt pinBruce Rogers
Commit 5a11d0f7 mistakenly converted a log message into an error condition when no pin interrupt is found for the pci device being passed through. Revert that part of the commit. Signed-off-by: Bruce Rogers <brogers@suse.com> Signed-off-by: Stefano Stabellini <sstabellini@kernel.org> Acked-by: Anthony PERARD <anthony.perard@citrix.com>
2016-03-22include/qemu/osdep.h: Don't include qapi/error.hMarkus Armbruster
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the Error typedef. Since then, we've moved to include qemu/osdep.h everywhere. Its file comment explains: "To avoid getting into possible circular include dependencies, this file should not include any other QEMU headers, with the exceptions of config-host.h, compiler.h, os-posix.h and os-win32.h, all of which are doing a similar job to this file and are under similar constraints." qapi/error.h doesn't do a similar job, and it doesn't adhere to similar constraints: it includes qapi-types.h. That's in excess of 100KiB of crap most .c files don't actually need. Add the typedef to qemu/typedefs.h, and include that instead of qapi/error.h. Include qapi/error.h in .c files that need it and don't get it now. Include qapi-types.h in qom/object.h for uint16List. Update scripts/clean-includes accordingly. Update it further to match reality: replace config.h by config-target.h, add sysemu/os-posix.h, sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h comment quoted above similarly. This reduces the number of objects depending on qapi/error.h from "all of them" to less than a third. Unfortunately, the number depending on qapi-types.h shrinks only a little. More work is needed for that one. Signed-off-by: Markus Armbruster <armbru@redhat.com> [Fix compilation without the spice devel packages. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-01-29xen: Clean up includesPeter Maydell
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1453832250-766-14-git-send-email-peter.maydell@linaro.org
2016-01-21Xen PCI passthru: convert to realize()Cao jin
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2016-01-21Add Error **errp for xen_pt_config_init()Cao jin
To catch the error message. Also modify the caller Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2016-01-21Add Error **errp for xen_pt_setup_vga()Cao jin
To catch the error message. Also modify the caller Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2016-01-21Add Error **errp for xen_host_pci_device_get()Cao jin
To catch the error message. Also modify the caller Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2015-10-26Qemu/Xen: Fix early freeing MSIX MMIO memory regionLan Tianyu
msix->mmio is added to XenPCIPassthroughState's object as property. object_finalize_child_property is called for XenPCIPassthroughState's object, which calls object_property_del_all, which is going to try to delete msix->mmio. object_finalize_child_property() will access msix->mmio's obj. But the whole msix struct has already been freed by xen_pt_msix_delete. This will cause segment fault when msix->mmio has been overwritten. This patch is to fix the issue. Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-09-10xen/pt: Don't slurp wholesale the PCI configuration registersKonrad Rzeszutek Wilk
Instead we have the emulation registers ->init functions which consult the host values to see what the initial value should be and they are responsible for populating the dev.config. Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-09-10xen/pt: Check for return values for xen_host_pci_[get|set] in initKonrad Rzeszutek Wilk
and if we have failures we call xen_pt_destroy introduced in 'xen/pt: Move bulk of xen_pt_unregister_device in its own routine.' and free all of the allocated structures. Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-09-10xen/pt: Move bulk of xen_pt_unregister_device in its own routine.Konrad Rzeszutek Wilk
This way we can call it if we fail during init. This code movement introduces no changes. Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-09-10xen/pt: Make xen_pt_unregister_device idempotentKonrad Rzeszutek Wilk
To deal with xen_host_pci_[set|get]_ functions returning error values and clearing ourselves in the init function we should make the .exit (xen_pt_unregister_device) function be idempotent in case the generic code starts calling .exit (or for fun does it before calling .init!). Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-09-10xen/pt: Use xen_host_pci_get_[byte|word] instead of dev.configKonrad Rzeszutek Wilk
During init time we treat the dev.config area as a cache of the host view. However during execution time we treat it as guest view (by the generic PCI API). We need to sync Xen's code to the generic PCI API view. This is the first step by replacing all of the code that uses dev.config or pci_get_[byte|word] to get host value to actually use the xen_host_pci_get_[byte|word] functions. Interestingly in 'xen_pt_ptr_reg_init' we also needed to swap reg_field from uint32_t to uint8_t - since the access is only for one byte not four bytes. We can split this as a seperate patch however we would have to use a cast to thwart compiler warnings in the meantime. We also truncated 'flags' to 'flag' to make the code fit within the 80 characters. Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-09-10xen/pt: xen_host_pci_config_read returns -errno, not -1 on failureKonrad Rzeszutek Wilk
However the init routines assume that on errors the return code is -1 (as the libxc API is) - while those xen_host_* routines follow another paradigm - negative errno on return, 0 on success. Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-09-10xen/pt: Update comments with proper function name.Konrad Rzeszutek Wilk
It has changed but the comments still refer to the old names. Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-09-10xen, gfx passthrough: register a isa bridgeTiejun Chen
Currently we just register this isa bridge when we use IGD passthrough in Xen side. Signed-off-by: Tiejun Chen <tiejun.chen@intel.com> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-09-10xen, gfx passthrough: retrieve VGA BIOS to workTiejun Chen
Now we retrieve VGA bios like kvm stuff in qemu but we need to fix Device Identification in case if its not matched with the real IGD device since Seabios is always trying to compare this ID to work out VGA BIOS. Signed-off-by: Tiejun Chen <tiejun.chen@intel.com> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-09-10xen, gfx passthrough: basic graphics passthrough supportTiejun Chen
basic gfx passthrough support: - add a vga type for gfx passthrough - register/unregister legacy VGA I/O ports and MMIOs for passthrough GFX Signed-off-by: Tiejun Chen <tiejun.chen@intel.com> Signed-off-by: Yang Zhang <yang.z.zhang@Intel.com> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-06-23Merge remote-tracking branch ↵Peter Maydell
'remotes/mjt/tags/pull-trivial-patches-2015-06-23' into staging trivial patches for 2015-06-23 # gpg: Signature made Tue Jun 23 18:23:45 2015 BST using RSA key ID A4C3D7DB # gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>" # gpg: aka "Michael Tokarev <mjt@corpit.ru>" # gpg: aka "Michael Tokarev <mjt@debian.org>" * remotes/mjt/tags/pull-trivial-patches-2015-06-23: (21 commits) util/qemu-sockets: improve ai_flag hints for ipv6 hosts hw/display/tcx.c: Fix memory leak hw/display/cg3.c: Fix memory leak Makefile: Add "make ctags" Makefile: Fix "make cscope TAGS" qemu-options: Use @itemx where appropriate qemu-options: Improve -global documentation throttle: Fix typo in the documentation of block_set_io_throttle hw/display/qxl-logger.c: Constify some variable configure: rearrange --help and consolidate enable/disable together libcacard: pkgconfig: tidy dependent libs vt82c686: QOMify xen_pt: QOMify wdt_i6300esb: QOMify piix4: QOMify piix: piix3 QOMify pci-assign: QOMify Print error when failing to load PCI config data Grammar: 'as to'->'as for' remove libdecnumber/dpd/decimal128Local.h ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-23xen_pt: QOMifyGonglei
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Gonglei <arei.gonglei@huawei.com> Tested-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-28 17:14:52 +0000