aboutsummaryrefslogtreecommitdiff
path: root/hw/wdt_i6300esb.c
AgeCommit message (Collapse)Author
2012-01-27pci: convert to QEMU Object ModelAnthony Liguori
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-08pci: rename pci_register_bar_region() to pci_register_bar()Avi Kivity
Reviewed-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-08i6300esb: convert to memory APIAvi Kivity
Also add missing destructor. Reviewed-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-06-16wdt: remove unused variablesMichael S. Tsirkin
Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
2011-06-12hw/wdt_i6300esb.c: convert to PCIDeviceInfo to initialize idsIsaku Yamahata
use PCIDeviceInfo to initialize ids. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-04-07wdt_i6300esb: convert to pci_register_bar_simple()Avi Kivity
Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-03-21change all other clock references to use nanosecond resolution accessorsPaolo Bonzini
This was done with: sed -i 's/qemu_get_clock\>/qemu_get_clock_ns/' \ $(git grep -l 'qemu_get_clock\>' ) sed -i 's/qemu_new_timer\>/qemu_new_timer_ns/' \ $(git grep -l 'qemu_new_timer\>' ) after checking that get_clock and new_timer never occur twice on the same line. There were no missed occurrences; however, even if there had been, they would have been caught by the compiler. There was exactly one false positive in qemu_run_timers: - current_time = qemu_get_clock (clock); + current_time = qemu_get_clock_ns (clock); which is of course not in this patch. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2010-12-12Watchdog: disable watchdog timer when hard-rebooting a guest.Richard W.M. Jones
This commit causes the watchdog timer to be reset when a guest is hard-rebooted. The failure case previously was as follows: (a) guest boots, watchdog is enabled (b) guest does a reset eg: echo 'b' > /proc/sysrq-trigger (note that an ordinary /sbin/reboot wouldn't hit this case since as the watchdog daemon is shut down, the daemon would properly disable the watchdog device) (c) the reboot takes longer than the remaining time on the watchdog (d) the watchdog therefore fires during the reboot (e) probably the VM would just reboot again at this point which is pretty benign, but it could depend on the action that the user had selected for the watchdog Now we use the qdev reset function to register a reset handler which disables the timer. Note the handler is called _either_ just after init _or_ when the guest reboots. In the i6300esb case there is a small refactoring of the code so that the device's internal state is now fully restored to defaults on a reboot. Signed-off-by: Richard W.M. Jones <rjones@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-11wdt_i6300esb: register a reset functionBernhard Kohl
The device shall set its default hardware state after each reset. This includes that the timer is stopped which is especially important if the guest does a reboot independantly of a watchdog bite. I moved the initialization of the state variables completely from the init to the reset function which is called right after init during the first boot and afterwards during each reboot. Signed-off-by: Bernhard Kohl <bernhard.kohl@nsn.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-11Add endianness as io mem parameterAlexander Graf
As stated before, devices can be little, big or native endian. The target endianness is not of their concern, so we need to push things down a level. This patch adds a parameter to cpu_register_io_memory that allows a device to choose its endianness. For now, all devices simply choose native endian, because that's the same behavior as before. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-07-11pci: don't overwrite multi functio bit in pci header type.Isaku Yamahata
Don't overwrite pci header type. Otherwise, multi function bit which pci_init_header_type() sets appropriately is lost. Anyway PCI_HEADER_TYPE_NORMAL is zero, so it is unnecessary to zero which is already zero cleared. how to test: run qemu and issue info pci to see whether a device in question is normal device, not pci-to-pci bridge. This is handy because guest os isn't required. tested changes: The following files are covered by using following commands. sparc64-softmmu apb_pci.c, vga-pci.c, cmd646.c, ne2k_pci.c, sun4u.c ppc-softmmu grackle_pci.c, cmd646.c, ne2k_pci.c, vga-pci.c, macio.c ppc-softmmu -M mac99 unin_pci.c(uni-north, uni-north-agp) ppc64-softmmu pci-ohci, ne2k_pci, vga-pci, unin_pci.c(u3-agp) x86_64-softmmu acpi_piix4.c, ide/piix.c, piix_pci.c -vga vmware vmware_vga.c -watchdog i6300esb wdt_i6300esb.c -usb usb-uhci.c -sound ac97 ac97.c -nic model=rtl8139 rtl8139.c -nic model=pcnet pcnet.c -balloon virtio virtio-pci.c: untested changes: The following changes aren't tested. prep_pci.c: ppc-softmmu -M prep should cover, but core dumped. unin_pci.c(uni-north-pci): the caller is commented out. openpic.c: the caller is commented out in ppc_prep.c Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-12-23wdt_i6300esb: symbolic names for pci registersMichael S. Tsirkin
No functional changes. I verified that the generated binary does not change. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Juan Quintela <quintela@redhat.com> Acked-by: Glauber Costa <glommer@gmail.com>
2009-12-03savevm: Port to qdev.vmsd all devices that have qdevJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-09pci: introduce FMT_PCIBUS for printf format for pcibus_t.Isaku Yamahata
This patch is preliminary for 64bit BAR. Later pcibus_t will be changed from uint32_t to uint64_t. Introduce FMT_PCIBUS for printf format for pcibus_t. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-09pci: introduce pcibus_t to represent pci bus address/size instead of uint32_tIsaku Yamahata
This patch is preliminary for 64 bit BAR support. Introduce dedicated type, pcibus_t, to represent pci bus address/size instead of uint32_t. Later this type will be changed to uint64_t. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-09pci: s/PCI_ADDRESS_SPACE_/PCI_BASE_ADDRESS_SPACE_/ to match pci_regs.hIsaku Yamahata
make constants for pci base address match pci_regs.h by renaming PCI_ADDRESS_SPACE_xxx to PCI_BASE_ADDRESS_SPACE_xxx. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-27wdt_i6300esb: move PCI_DEVICE_IDE_INTEL_ESB_9 to pci_ids.hJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-27wdt_i6300esb: remove useless casts from void *Juan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-27wdt_i6300esb: port to vmstateJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-01Revert "Get rid of _t suffix"Anthony Liguori
In the very least, a change like this requires discussion on the list. The naming convention is goofy and it causes a massive merge problem. Something like this _must_ be presented on the list first so people can provide input and cope with it. This reverts commit 99a0949b720a0936da2052cb9a46db04ffc6db29. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-01Get rid of _t suffixmalc
Some not so obvious bits, slirp and Xen were left alone for the time being. Signed-off-by: malc <av1474@comtv.ru>
2009-09-20Compile wdt_i6300esb only onceBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-11Unexport ticks_per_sec variable. Create get_ticks_per_sec() functionJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-11qdev: Fix i6300 upcastMarkus Armbruster
Use DO_UPCAST() instead of container_of() to go from PCIDevice to I6300State. This ensures that PCIDevice is the first member of struct I6300State. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27qdev: add return value to init() callbacks.Gerd Hoffmann
Sorry folks, but it has to be. One more of these invasive qdev patches. We have a serious design bug in the qdev interface: device init callbacks can't signal failure because the init() callback has no return value. This patch fixes it. We have already one case in-tree where this is needed: Try -device virtio-blk-pci (without drive= specified) and watch qemu segfault. This patch fixes it. With usb+scsi being converted to qdev we'll get more devices where the init callback can fail for various reasons. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27qdev: convert watchdogsMarkus Armbruster
-watchdog NAME is now equivalent to -device NAME, except it treats option argument '?' specially, and supports only one watchdog. A side effect is that a device created with -watchdog may now receive a different PCI address. i6300esb is now available on any machine with a PCI bus, not just PCs. ib700 is still PC only, but that could be changed easily. The only remaining use of struct WatchdogTimerModel and watchdog_add_model() is supporting '-watchdog ?'. Should be replaced by searching device_info_list for watchdog devices when we can identify them there. Also fixes ib700 not to use vm_clock before it is initialized: in wdt_ib700_init(), called from register_watchdogs(), which runs before init_timers(). The bug made ib700_write_enable_reg() crash in qemu_del_timer(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27Clean up upcast from PCIDevice to I6300StateMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-25Make CPURead/WriteFunc structure 'const'Blue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-07-16Update to a hopefully more future proof FSF addressBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-06-16Rename pci_register_io_region() to pci_register_bar()Avi Kivity
This function is used to manage a PCI BAR, so make the more generic pci_register_io_region() available to other uses. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-16Remove io_index argument from cpu_register_io_memory()Avi Kivity
The parameter is always zero except when registering the three internal io regions (ROM, unassigned, notdirty). Remove the parameter to reduce the API's power, thus facilitating future change. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-01Hardware watchdogRichard W.M. Jones
Here is an updated hardware watchdog patch, which should fix everything that was raised about the previous version ... Signed-off-by: Richard W.M. Jones <rjones@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-26 13:26:01 +0000