aboutsummaryrefslogtreecommitdiff
path: root/hw/watchdog
AgeCommit message (Collapse)Author
2019-03-05hw/arm/stellaris: Implement watchdog timerMichel Heily
Implement the watchdog timer for the stellaris boards. This device is a close variant of the CMSDK APB watchdog device, so we can model it by subclassing that device and tweaking the behaviour of some of its registers. Signed-off-by: Michel Heily <michelheily@gmail.com> Reviewed-by: Peter Maydell <petser.maydell@linaro.org> [PMM: rewrote commit message, fixed a few checkpatch nits, added comment giving the URL of the spec for the Stellaris variant of the watchdog device] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-11hw/watchdog/wdt_i6300esb: remove a unnecessary commentPeng Hao
The registered memory region of i6300esb is not suitable for coalesced mmio, because a write for the region may trigger an immediate action and can't be delayed. Signed-off-by: Peng Hao <peng.hao2@zte.com.cn> Message-Id: <1544253511-82742-1-git-send-email-peng.hao2@zte.com.cn> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-11qemu/queue.h: leave head structs anonymous unless necessaryPaolo Bonzini
Most list head structs need not be given a name. In most cases the name is given just in case one is going to use QTAILQ_LAST, QTAILQ_PREV or reverse iteration, but this does not apply to lists of other kinds, and even for QTAILQ in practice this is only rarely needed. In addition, we will soon reimplement those macros completely so that they do not need a name for the head struct. So clean up everything, not giving a name except in the rare case where it is necessary. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-28qapi: Drop qapi_event_send_FOO()'s Error ** argumentPeter Xu
The generated qapi_event_send_FOO() take an Error ** argument. They can't actually fail, because all they do with the argument is passing it to functions that can't fail: the QObject output visitor, and the @qmp_emit callback, which is either monitor_qapi_event_queue() or event_test_emit(). Drop the argument, and pass &error_abort to the QObject output visitor and @qmp_emit instead. Suggested-by: Eric Blake <eblake@redhat.com> Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20180815133747.25032-4-peterx@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Commit message rewritten, update to qapi-code-gen.txt corrected] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-08-20hw/watchdog/cmsdk_apb_watchdog: Implement CMSDK APB watchdog modulePeter Maydell
The Arm Cortex-M System Design Kit includes a simple watchdog module based on a 32-bit down-counter. Implement this. Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-15hw/watchdog/wdt_i6300esb: Convert away from old_mmioPeter Maydell
Convert the wdt_i6300esb device away from using the old_mmio field of MemoryRegionOps. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180601141223.26630-5-peter.maydell@linaro.org
2018-03-02qapi: Empty out qapi-schema.jsonMarkus Armbruster
The previous commit improved compile time by including less of the generated QAPI headers. This is impossible for stuff defined directly in qapi-schema.json, because that ends up in headers that that pull in everything. Move everything but include directives from qapi-schema.json to new sub-module qapi/misc.json, then include just the "misc" shard where possible. It's possible everywhere, except: * monitor.c needs qmp-command.h to get qmp_init_marshal() * monitor.c, ui/vnc.c and the generated qapi-event-FOO.c need qapi-event.h to get enum QAPIEvent Perhaps we'll get rid of those some other day. Adding a type to qapi/migration.json now recompiles some 120 instead of 2300 out of 5100 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180211093607.27351-25-armbru@redhat.com> [eblake: rebase to master] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-03-02Include less of the generated modular QAPI headersMarkus Armbruster
In my "build everything" tree, a change to the types in qapi-schema.json triggers a recompile of about 4800 out of 5100 objects. The previous commit split up qmp-commands.h, qmp-event.h, qmp-visit.h, qapi-types.h. Each of these headers still includes all its shards. Reduce compile time by including just the shards we actually need. To illustrate the benefits: adding a type to qapi/migration.json now recompiles some 2300 instead of 4800 objects. The next commit will improve it further. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180211093607.27351-24-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> [eblake: rebase to master] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-02-09Eliminate qapi/qmp/types.hMarkus Armbruster
qapi/qmp/types.h is a convenience header to include a number of qapi/qmp/ headers. Since we rarely need all of the headers qapi/qmp/types.h includes, we bypass it most of the time. Most of the places that use it don't need all the headers, either. Include the necessary headers directly, and drop qapi/qmp/types.h. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-9-armbru@redhat.com>
2018-02-09Include qapi/error.h exactly where neededMarkus Armbruster
This cleanup makes the number of objects depending on qapi/error.h drop from 1910 (out of 4743) to 1612 in my "build everything" tree. While there, separate #include from file comment with a blank line, and drop a useless comment on why qemu/osdep.h is included first. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-5-armbru@redhat.com> [Semantic conflict with commit 34e304e975 resolved, OSX breakage fixed]
2017-12-18misc: drop old i386 dependencyPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-10-15pci: Add INTERFACE_CONVENTIONAL_PCI_DEVICE to Conventional PCI devicesEduardo Habkost
Add INTERFACE_CONVENTIONAL_PCI_DEVICE to all direct subtypes of TYPE_PCI_DEVICE, except: 1) The ones that already have INTERFACE_PCIE_DEVICE set: * base-xhci * e1000e * nvme * pvscsi * vfio-pci * virtio-pci * vmxnet3 2) base-pci-bridge Not all PCI bridges are Conventional PCI devices, so INTERFACE_CONVENTIONAL_PCI_DEVICE is added only to the subtypes that are actually Conventional PCI: * dec-21154-p2p-bridge * i82801b11-bridge * pbm-bridge * pci-bridge The direct subtypes of base-pci-bridge not touched by this patch are: * xilinx-pcie-root: Already marked as PCIe-only. * pcie-pci-bridge: Already marked as PCIe-only. * pcie-port: all non-abstract subtypes of pcie-port are already marked as PCIe-only devices. 3) megasas-base Not all megasas devices are Conventional PCI devices, so the interface names are added to the subclasses registered by megasas_register_types(), according to information in the megasas_devices[] array. "megasas-gen2" already implements INTERFACE_PCIE_DEVICE, so add INTERFACE_CONVENTIONAL_PCI_DEVICE only to "megasas". Acked-by: Alberto Garcia <berto@igalia.com> Acked-by: John Snow <jsnow@redhat.com> Acked-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-10-12watchdog/aspeed: fix variable type to store reload valueCédric Le Goater
Initially from Anton D. Kachalov" <mouse@yandex-team.ru> but the SoB was missing. Signed-off-by: Cédric Le Goater <clg@kaod.org> Acked-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 20170920064915.30027-1-clg@kaod.org [clg: change commit log and subject replace UL suffix by ULL ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-10-02watchdog: Allow setting action on the flyMichal Privoznik
Currently, the only time that users can set watchdog action is at the start as all we expose is this -watchdog-action command line argument. This is suboptimal when users want to plug the device later via monitor. Alternatively, they might want to change the action for already existing device on the fly. Inspired by: https://bugzilla.redhat.com/show_bug.cgi?id=1447169 Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Message-Id: <35d6ce6fe3d357122d73b8272bc8198134c74104.1504771369.git.mprivozn@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> [Missing colon in doc comment fixed] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-10-02watchdog.h: Drop local redefinition of actions enumMichal Privoznik
We already have enum that enumerates all the actions that a watchdog can take when hitting its timeout: WatchdogAction. Use that instead of inventing our own. Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Message-Id: <ce2790634e6a1b3b6cf90462399d17bad83f0290.1504771369.git.mprivozn@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-10-02qapi: Rename WatchdogExpirationAction enumMichal Privoznik
The new name is WatchdogAction which is shorter, Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Message-Id: <dbd61a0928821348486d0d6260be2bd3b02b6402.1504771369.git.mprivozn@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-09-04watchdog: wdt_aspeed: Add support for the reset width registerAndrew Jeffery
The reset width register controls how the pulse on the SoC's WDTRST{1,2} pins behaves. A pulse is emitted if the external reset bit is set in WDT_CTRL. On the AST2500 WDT_RESET_WIDTH can consume magic bit patterns to configure push-pull/open-drain and active-high/active-low behaviours and thus needs some special handling in the write path. As some of the capabilities depend on the SoC version a silicon-rev property is introduced, which is used to guard version-specific behaviour. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-08-30watchdog/wdt_diag288: Mark diag288 watchdog as non-hotpluggableThomas Huth
QEMU currently aborts when the user tries to hot-unplug a diag288 device: $ qemu-system-s390x -nographic -nodefaults -S -monitor stdio QEMU 2.9.92 monitor - type 'help' for more information (qemu) device_add diag288,id=x (qemu) device_del x ** ERROR:qemu/qdev-monitor.c:872:qdev_unplug: assertion failed: (hotplug_ctrl) Aborted (core dumped) The device is not designed as hot-pluggable (it should only be used via the "-watchdog" parameter), so let's simply remove the possibility to hotplug it to prevent that users can run into this ugly situation. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1502892528-22618-1-git-send-email-thuth@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2017-05-23shutdown: Add source information to SHUTDOWN and RESETEric Blake
Time to wire up all the call sites that request a shutdown or reset to use the enum added in the previous patch. It would have been less churn to keep the common case with no arguments as meaning guest-triggered, and only modified the host-triggered code paths, via a wrapper function, but then we'd still have to audit that I didn't miss any host-triggered spots; changing the signature forces us to double-check that I correctly categorized all callers. Since command line options can change whether a guest reset request causes an actual reset vs. a shutdown, it's easy to also add the information to reset requests. Signed-off-by: Eric Blake <eblake@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> [ppc parts] Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> [SPARC part] Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> [s390x parts] Message-Id: <20170515214114.15442-5-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-02-07wdt: Add Aspeed watchdog device modelCédric Le Goater
The Aspeed SoC includes a set of watchdog timers using 32-bit decrement counters, which can be based either on the APB clock or a 1 MHz clock. The watchdog timer is designed to prevent system deadlock and, in general, it should be restarted before timeout. When a timeout occurs, different types of signals can be generated, ARM reset, SOC reset, System reset, CPU Interrupt, external signal or boot from alternate block. The current model only performs the system reset function as this is used by U-Boot and Linux. Signed-off-by: Joel Stanley <joel@jms.id.au> Message-id: 1485452251-1593-2-git-send-email-clg@kaod.org [clg: - fixed compile breakage - fixed io region size - added watchdog_perform_action() on timer expiry - wrote a commit log - merged fixes from Andrew Jeffery to scale the reload value ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-12-22watchdog: 6300esb: add exit functionLi Qiang
When the Intel 6300ESB watchdog is hot unplug. The timer allocated in realize isn't freed thus leaking memory leak. This patch avoid this through adding the exit function. Signed-off-by: Li Qiang <liqiang6-s@360.cn> Message-Id: <583cde9c.3223ed0a.7f0c2.886e@mx.google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-23nmi: remove x86 specific nmi handlingBandan Das
nmi_monitor_handle is wired to call the x86 nmi handler. So, we can directly use it at call sites. Signed-off-by: Bandan Das <bsd@redhat.com> Message-Id: <1463761717-26558-3-git-send-email-bsd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-19hw: explicitly include qemu/log.hPaolo Bonzini
Move the inclusion out of hw/hw.h, most files do not need it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22util: move declarations out of qemu-common.hVeronia Bahaa
Move declarations out of qemu-common.h for functions declared in utils/ files: e.g. include/qemu/path.h for utils/path.c. Move inline functions out of qemu-common.h and into new files (e.g. include/qemu/bcd.h) Signed-off-by: Veronia Bahaa <veroniabahaa@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-22Replaced get_tick_per_sec() by NANOSECONDS_PER_SECONDRutuja Shah
This patch replaces get_ticks_per_sec() calls with the macro NANOSECONDS_PER_SECOND. Also, as there are no callers, get_ticks_per_sec() is then removed. This replacement improves the readability and understandability of code. For example, timer_mod(fdctrl->result_timer, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + (get_ticks_per_sec() / 50)); NANOSECONDS_PER_SECOND makes it obvious that qemu_clock_get_ns matches the unit of the expression on the right side of the plus. Signed-off-by: Rutuja Shah <rutu.shah.26@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-01watchdog/diag288: avoid race condition on expired watchdogSascha Silbe
When configured to inject an NMI, watchdog_perform_action() may cause the BQL to be temporarily relinquished (inject_nmi() → ... → s390_nmi() → s390_cpu_restart() → run_on_cpu()). When the guest issues diag 288 again in response to the NMI, the diag 288 operation will race against wdt_diag288_reset(). Depending on scheduler behaviour, wdt_diag288_reset() may be run after the guest issued a diag 288 Init. As a result, we will cancel the timer the guest just set up. The effect observed by the guest is that a second expiry does not trigger the watchdog action and diag 288 Change operations fail. Fix this by resetting the timer _before_ invoking the action. Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Acked-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-01-29hw: Clean up includesPeter Maydell
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1453832250-766-38-git-send-email-peter.maydell@linaro.org
2016-01-29s390: Clean up includesPeter Maydell
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Message-id: 1453832250-766-8-git-send-email-peter.maydell@linaro.org
2016-01-27watchdog/diag288: don't reset for action=none|debug|pauseBo Tu
If the watchdog expires and the guest is not notified (NONE, DEBUG, PAUSE), we must not reset the watchdog device, otherwise watchdog_ping() and watchdog_stop() will fail when triggered by the guest. This reset behavior matches to the z/VM behavior when a custom command is to be executed on expiry. Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-01-27watchdog: introduction of get_watchdog_actionBo Tu
Add get_watchdog_action(void) to allow access to the configured action. Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Bo Tu <tubo@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-09-25i6300esb: remove muldiv64()Laurent Vivier
Originally, timers were ticks based, and it made sense to add ticks to current time to know when to trigger an alarm. But since commit: 7447545 change all other clock references to use nanosecond resolution accessors All timers use nanoseconds and we need to convert ticks to nanoseconds, by doing something like: y = muldiv64(x, get_ticks_per_sec(), PCI_FREQUENCY) where x is the number of device ticks and y the number of system ticks. y is used as nanoseconds in timer functions, it works because 1 tick is 1 nanosecond. (get_ticks_per_sec() is 10^9) But as PCI frequency is 33 MHz, we can also do: y = x * 30; /* 33 MHz PCI period is 30 ns */ Which is much more simple. This implies a 33.333333 MHz PCI frequency, but this is correct. Signed-off-by: Laurent Vivier <lvivier@redhat.com>
2015-09-11i6300esb: fix timer overflowLaurent Vivier
We use muldiv64() to compute the time to wait: timeout = muldiv64(get_ticks_per_sec(), timeout, 33000000); but get_ticks_per_sec() is 10^9 (30 bit value) and timeout is a 35 bit value. Whereas muldiv64 is: uint64_t muldiv64(uint64_t a, uint32_t b, uint32_t c) So we loose 3 bits of timeout. Swapping get_ticks_per_sec() and timeout fixes it. We can also replace it by a multiplication by 30 ns, but this changes PCI clock frequency from 33MHz to 33.333333MHz and we need to do this on all the QEMU PCI devices (later...) Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-07-14watchdog/diag288: correctly register for system reset requestsXu Wang
The diag288 watchdog is no sysbus device, therefore it doesn't get triggered on resets automatically using dc->reset. Let's register the reset handler manually, so we get correctly notified again when a system reset was requested. Also reset the watchdog on subsystem resets that don't trigger a full system reset. Signed-off-by: Xu Wang <gesaint@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Andreas Färber <afaerber@suse.de>
2015-06-23wdt_i6300esb: QOMifyGonglei
Signed-off-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-06-11watchdog: Add new Virtual Watchdog action INJECT-NMIMao Chuan Li
This patch allows QEMU to inject a NMI into a guest when the watchdog expires. Signed-off-by: Mao Chuan Li <maochuan@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> CC: Eric Blake <eblake@redhat.com> CC: Markus Armbruster <armbru@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-06-11s390x/watchdog: diag288 migration supportXu Wang
Add vmstate structure to keep state and data during migration. Signed-off-by: Xu Wang <gesaint@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-06-11s390x/watchdog: introduce diag288 watchdog deviceXu Wang
This patch introduces a new diag288 watchdog device that will, just like other watchdogs, monitor a guest and take corresponding actions when it detects that the guest is not responding. diag288 is s390x specific. The wiring to s390x KVM will be done in separate patches. Signed-off-by: Xu Wang <gesaint@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> [split out qemu-option.hx base changes]
2015-03-25i6300esb: Fix signed integer overflowDavid Gibson
If the guest programs a sufficiently large timeout value an integer overflow can occur in i6300esb_restart_timer(). e.g. if the maximum possible timer preload value of 0xfffff is programmed then we end up with the calculation: timeout = get_ticks_per_sec() * (0xfffff << 15) / 33000000; get_ticks_per_sec() returns 1000000000 (10^9) giving: 10^9 * (0xfffff * 2^15) == 0x1dcd632329b000000 (65 bits) Obviously the division by 33MHz brings it back under 64-bits, but the overflow has already occurred. Since signed integer overflow has undefined behaviour in C, in theory this could be arbitrarily bad. In practice, the overflowed value wraps around to something negative, causing the watchdog to immediately expire, killing the guest, which is still fairly bad. The bug can be triggered by running a Linux guest, loading the i6300esb driver with parameter "heartbeat=2046" and opening /dev/watchdog. The watchdog will trigger as soon as the device is opened. This patch corrects the problem by using muldiv64(), which effectively allows a 128-bit intermediate value between the multiplication and division. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <1427075508-12099-3-git-send-email-david@gibson.dropbear.id.au> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-03-25i6300esb: Correct endiannnessDavid Gibson
The IO operations for the i6300esb watchdog timer are marked as DEVICE_NATIVE_ENDIAN. This is not correct, and - as a PCI device - should be DEVICE_LITTLE_ENDIAN. This allows i6300esb to work on ppc targets (yes, using an Intel ICH derived device on ppc is a bit odd, but the driver exists on the guest and there's no more obviously suitable watchdog device). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <1427075508-12099-2-git-send-email-david@gibson.dropbear.id.au> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-03-09Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
pci, pc, virtio fixes and cleanups A bunch of fixes all over the place. All of ACPI refactoring has been merged. Legacy pci commands have been dropped. virtio header cleanup initial patches from virtio-1.0 branch Signed-off-by: Michael S. Tsirkin <mst@redhat.com> * remotes/mst/tags/for_upstream: (130 commits) acpi: drop unused code aml-build: comment fix acpi-build: fix typo in comment acpi: update generated files vhost user:support vhost user nic for non msi guests aml-build: fix build for glib < 2.22 acpi: update generated files Makefile.target: binary depends on config-devices acpi-test-data: update after pci rewrite acpi, mem-hotplug: use PC_DIMM_SLOT_PROP in acpi_memory_plug_cb(). pci-hotplug-old: Has been dead for five major releases, bury pci: Give a few helpers internal linkage acpi: make build_*() routines static to aml-build.c pc: acpi: remove not used anymore ssdt-[misc|pcihp].hex.generated blobs pc: acpi-build: drop template patching and create PCI bus tree dynamically tests: ACPI: update pc/SSDT.bridge due to new alg of PCI tree creation pc: acpi-build: simplify PCI bus tree generation tests: add ACPI blobs for qemu with bridge cases tests: bios-tables-test: add support for testing bridges tests: ACPI test blobs update due to PCI0._CRS changes ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Conflicts: hw/pci/pci-hotplug-old.c
2015-02-26QemuOpts: Drop qemu_opt_set(), rename qemu_opt_set_err(), fix useMarkus Armbruster
qemu_opt_set() is a wrapper around qemu_opt_set() that reports the error with qerror_report_err(). Most of its users assume the function can't fail. Make them use qemu_opt_set_err() with &error_abort, so that should the assumption ever break, it'll break noisily. Just two users remain, in util/qemu-config.c. Switch them to qemu_opt_set_err() as well, then rename qemu_opt_set_err() to qemu_opt_set(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2015-02-26pci: Trivial device model conversions to realizeMarkus Armbruster
Convert the device models where initialization obviously can't fail. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Gonglei <arei.gonglei@huawei.com>
2015-01-26vmstate: accept QEMUTimer in VMSTATE_TIMER*, add VMSTATE_TIMER_PTR*Paolo Bonzini
Old users of VMSTATE_TIMER* are mechanically changed to VMSTATE_TIMER_PTR variants. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-08-18memory: remove memory_region_destroyPaolo Bonzini
The function is empty after the previous patch, so remove it. Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-07-09watchdog: fix deadlock with -watchdog-action pausePaolo Bonzini
qemu_clock_enable says: /* Disabling the clock will wait for related timerlists to stop * executing qemu_run_timers. Thus, this functions should not * be used from the callback of a timer that is based on @clock. * Doing so would cause a deadlock. */ and it indeed does: vm_stop uses qemu_clock_enable on QEMU_CLOCK_VIRTUAL and watchdogs are based on QEMU_CLOCK_VIRTUAL, and we get a deadlock. Use qemu_system_vmstop_request_prepare()/qemu_system_vmstop_request() instead; yet another alternative could be a BH. I checked other occurrences of vm_stop and they should not have this problem. RUN_STATE_IO_ERROR could in principle (it depends on the code in the drivers) but it has been fixed by commit 2bd3bce, "block: asynchronously stop the VM on I/O errors", 2014-06-05. Tested-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-27qapi event: clean up in callersWenchao Xia
This patch improves docs and address small issues in event callers. Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-06-23qapi event: convert WATCHDOGWenchao Xia
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-06-16savevm: Remove all the unneeded version_minimum_id_old (x86)Juan Quintela
After previous Peter patch, they are redundant. This way we don't assign them except when needed. Once there, there were lots of case where the ".fields" indentation was wrong: .fields = (VMStateField []) { and .fields = (VMStateField []) { Change all the combinations to: .fields = (VMStateField[]){ The biggest problem (appart from aesthetics) was that checkpatch complained when we copy&pasted the code from one place to another. Signed-off-by: Juan Quintela <quintela@redhat.com> Acked-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2014-05-05PortioList: Store PortioList in device stateKirill Batuzov
PortioList is an abstraction used for construction of MemoryRegionPortioList from MemoryRegionPortio. It can be used later to unmap created memory regions. It also requires proper cleanup because some of the memory inside is allocated dynamically. By moving PortioList ot device state we make it possible to cleanup later and avoid leaking memory. This change spans several target platforms. The following testcases cover all changed lines: qemu-system-ppc -M prep qemu-system-i386 -vga qxl qemu-system-i386 -M isapc -soundhw adlib -device ib700,id=watchdog0,bus=isa.0 Signed-off-by: Kirill Batuzov <batuzovk@ispras.ru> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-01-06qemu-option: Remove qemu_opts_create_nofailPeter Crosthwaite
This is a boiler-plate _nofail variant of qemu_opts_create. Remove and use error_abort in call sites. null/0 arguments needs to be added for the id and fail_if_exists fields in affected callsites due to argument inconsistency between the normal and no_fail variants. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-28 10:22:58 +0000