aboutsummaryrefslogtreecommitdiff
path: root/hw/virtio
AgeCommit message (Collapse)Author
2024-04-15Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu ↵Peter Maydell
into staging virtio: bugfix A last minute fix for a use of a vector after it's released. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # -----BEGIN PGP SIGNATURE----- # # iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmYdBssPHG1zdEByZWRo # YXQuY29tAAoJECgfDbjSjVRpTHcH/Rtl2jNJ5myZOuEylw+T6/GSvyEne6CoreHK # zUNPxmXY+uJzCskXkJXyd4uIaci5iIH1JC9Tc0FzFYaYrTsoA1dlQridqoajKyN5 # E6zjKqepi3sLnvDE1VbZ1kVcNEX2xSAFX++iv4Rbn4HHO49yKR0jNajusTOsq505 # NObgNQXK/Yj1q0IXYrWDETV7xywpQqiiAzwnmhi6ac72+trqmPrUXnUulhitWR3K # iZBuGxAHn9c/ilW3J4FeSbqe6sC/AhqUz3RSM6dB+rkpvA0E675T526uVMWxND2H # auE+ou0kzZ8HNit3AHBg8316seHXzWP+ndVEZlifX33HoR1pltY= # =H3M5 # -----END PGP SIGNATURE----- # gpg: Signature made Mon 15 Apr 2024 11:51:55 BST # gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469 # gpg: issuer "mst@redhat.com" # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full] # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full] # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: virtio-pci: fix use of a released vector Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-04-15virtio-pci: fix use of a released vectorCindy Lu
During the booting process of the non-standard image, the behavior of the called function in qemu is as follows: 1. vhost_net_stop() was triggered by guest image. This will call the function virtio_pci_set_guest_notifiers() with assgin= false, virtio_pci_set_guest_notifiers(） will release the irqfd for vector 0 2. virtio_reset() was triggered, this will set configure vector to VIRTIO_NO_VECTOR 3.vhost_net_start() was called (at this time, the configure vector is still VIRTIO_NO_VECTOR) and then call virtio_pci_set_guest_notifiers() with assgin=true, so the irqfd for vector 0 is still not "init" during this process 4. The system continues to boot and sets the vector back to 0. After that msix_fire_vector_notifier() was triggered to unmask the vector 0 and meet the crash To fix the issue, we need to support changing the vector after VIRTIO_CONFIG_S_DRIVER_OK is set. (gdb) bt 0 __pthread_kill_implementation (threadid=<optimized out>, signo=signo@entry=6, no_tid=no_tid@entry=0) at pthread_kill.c:44 1 0x00007fc87148ec53 in __pthread_kill_internal (signo=6, threadid=<optimized out>) at pthread_kill.c:78 2 0x00007fc87143e956 in __GI_raise (sig=sig@entry=6) at ../sysdeps/posix/raise.c:26 3 0x00007fc8714287f4 in __GI_abort () at abort.c:79 4 0x00007fc87142871b in __assert_fail_base (fmt=0x7fc8715bbde0 "%s%s%s:%u: %s%sAssertion `%s' failed.\n%n", assertion=0x5606413efd53 "ret == 0", file=0x5606413ef87d "../accel/kvm/kvm-all.c", line=1837, function=<optimized out>) at assert.c:92 5 0x00007fc871437536 in __GI___assert_fail (assertion=0x5606413efd53 "ret == 0", file=0x5606413ef87d "../accel/kvm/kvm-all.c", line=1837, function=0x5606413f06f0 <__PRETTY_FUNCTION__.19> "kvm_irqchip_commit_routes") at assert.c:101 6 0x0000560640f884b5 in kvm_irqchip_commit_routes (s=0x560642cae1f0) at ../accel/kvm/kvm-all.c:1837 7 0x0000560640c98f8e in virtio_pci_one_vector_unmask (proxy=0x560643c65f00, queue_no=4294967295, vector=0, msg=..., n=0x560643c6e4c8) at ../hw/virtio/virtio-pci.c:1005 8 0x0000560640c99201 in virtio_pci_vector_unmask (dev=0x560643c65f00, vector=0, msg=...) at ../hw/virtio/virtio-pci.c:1070 9 0x0000560640bc402e in msix_fire_vector_notifier (dev=0x560643c65f00, vector=0, is_masked=false) at ../hw/pci/msix.c:120 10 0x0000560640bc40f1 in msix_handle_mask_update (dev=0x560643c65f00, vector=0, was_masked=true) at ../hw/pci/msix.c:140 11 0x0000560640bc4503 in msix_table_mmio_write (opaque=0x560643c65f00, addr=12, val=0, size=4) at ../hw/pci/msix.c:231 12 0x0000560640f26d83 in memory_region_write_accessor (mr=0x560643c66540, addr=12, value=0x7fc86b7bc628, size=4, shift=0, mask=4294967295, attrs=...) at ../system/memory.c:497 13 0x0000560640f270a6 in access_with_adjusted_size (addr=12, value=0x7fc86b7bc628, size=4, access_size_min=1, access_size_max=4, access_fn=0x560640f26c8d <memory_region_write_accessor>, mr=0x560643c66540, attrs=...) at ../system/memory.c:573 14 0x0000560640f2a2b5 in memory_region_dispatch_write (mr=0x560643c66540, addr=12, data=0, op=MO_32, attrs=...) at ../system/memory.c:1521 15 0x0000560640f37bac in flatview_write_continue (fv=0x7fc65805e0b0, addr=4273803276, attrs=..., ptr=0x7fc871e9c028, len=4, addr1=12, l=4, mr=0x560643c66540) at ../system/physmem.c:2714 16 0x0000560640f37d0f in flatview_write (fv=0x7fc65805e0b0, addr=4273803276, attrs=..., buf=0x7fc871e9c028, len=4) at ../system/physmem.c:2756 17 0x0000560640f380bf in address_space_write (as=0x560642161ae0 <address_space_memory>, addr=4273803276, attrs=..., buf=0x7fc871e9c028, len=4) at ../system/physmem.c:2863 18 0x0000560640f3812c in address_space_rw (as=0x560642161ae0 <address_space_memory>, addr=4273803276, attrs=..., buf=0x7fc871e9c028, len=4, is_write=true) at ../system/physmem.c:2873 --Type <RET> for more, q to quit, c to continue without paging-- 19 0x0000560640f8aa55 in kvm_cpu_exec (cpu=0x560642f205e0) at ../accel/kvm/kvm-all.c:2915 20 0x0000560640f8d731 in kvm_vcpu_thread_fn (arg=0x560642f205e0) at ../accel/kvm/kvm-accel-ops.c:51 21 0x00005606411949f4 in qemu_thread_start (args=0x560642f292b0) at ../util/qemu-thread-posix.c:541 22 0x00007fc87148cdcd in start_thread (arg=<optimized out>) at pthread_create.c:442 23 0x00007fc871512630 in clone3 () at ../sysdeps/unix/sysv/linux/x86_64/clone3.S:81 (gdb) MST: coding style and typo fixups Fixes: f9a09ca3ea ("vhost: add support for configure interrupt") Cc: qemu-stable@nongnu.org Signed-off-by: Cindy Lu <lulu@redhat.com> Message-ID: <2321ade5f601367efe7380c04e3f61379c59b48f.1713173550.git.mst@redhat.com> Cc: Lei Yang <leiyang@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Cindy Lu <lulu@redhat.com>
2024-04-10hw/virtio/virtio-crypto: Protect from DMA re-entrancy bugsPhilippe Mathieu-Daudé
Replace qemu_bh_new_guarded() by virtio_bh_new_guarded() so the bus and device use the same guard. Otherwise the DMA-reentrancy protection can be bypassed. Fixes: CVE-2024-3446 Cc: qemu-stable@nongnu.org Suggested-by: Alexander Bulekov <alxndr@bu.edu> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20240409105537.18308-5-philmd@linaro.org>
2024-04-10hw/virtio: Introduce virtio_bh_new_guarded() helperPhilippe Mathieu-Daudé
Introduce virtio_bh_new_guarded(), similar to qemu_bh_new_guarded() but using the transport memory guard, instead of the device one (there can only be one virtio device per virtio bus). Inspired-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20240409105537.18308-2-philmd@linaro.org>
2024-04-09vdpa-dev: Fix the issue of device status not updating when configuration ↵lyx634449800
interruption is triggered The set_config callback function vhost_vdpa_device_get_config in vdpa-dev does not fetch the current device status from the hardware device, causing the guest os to not receive the latest device status information. The hardware updates the config status of the vdpa device and then notifies the os. The guest os receives an interrupt notification, triggering a get_config access in the kernel, which then enters qemu internally. Ultimately, the vhost_vdpa_device_get_config function of vdpa-dev is called One scenario encountered is when the device needs to bring down the vdpa net device. After modifying the status field of virtio_net_config in the hardware, it sends an interrupt notification. However, the guest os always receives the STATUS field as VIRTIO_NET_S_LINK_UP. Signed-off-by: Yuxue Liu <yuxue.liu@jaguarmicro.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20240408020003.1979-1-yuxue.liu@jaguarmicro.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2024-04-09hw/virtio: Fix packed virtqueue flush used_idxWafer
In the event of writing many chains of descriptors, the device must write just the id of the last buffer in the descriptor chain, skip forward the number of descriptors in the chain, and then repeat the operations for the rest of chains. Current QEMU code writes all the buffer ids consecutively, and then skips all the buffers altogether. This is a bug, and can be reproduced with a VirtIONet device with _F_MRG_RXBUB and without _F_INDIRECT_DESC: If a virtio-net device has the VIRTIO_NET_F_MRG_RXBUF feature but not the VIRTIO_RING_F_INDIRECT_DESC feature, 'VirtIONetQueue->rx_vq' will use the merge feature to store data in multiple 'elems'. The 'num_buffers' in the virtio header indicates how many elements are merged. If the value of 'num_buffers' is greater than 1, all the merged elements will be filled into the descriptor ring. The 'idx' of the elements should be the value of 'vq->used_idx' plus 'ndescs'. Fixes: 86044b24e8 ("virtio: basic packed virtqueue support") Acked-by: Eugenio Pérez <eperezma@redhat.com> Signed-off-by: Wafer <wafer@jaguarmicro.com> Message-Id: <20240407015451.5228-2-wafer@jaguarmicro.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2024-04-09Revert "hw/virtio: Add support for VDPA network simulation devices"Michael S. Tsirkin
This reverts commit cd341fd1ffded978b2aa0b5309b00be7c42e347c. The patch adds non-upstream code in include/standard-headers/linux/virtio_pci.h which would make maintainance harder. Revert for now. Suggested-by: Jason Wang <jasowang@redhat.com> Message-Id: <df6b6b465753e754a19459e8cd61416548f89a42.1712569644.git.mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2024-03-26vdpa-dev: Fix initialisation order to restore VDUSE compatibilityKevin Wolf
VDUSE requires that virtqueues are first enabled before the DRIVER_OK status flag is set; with the current API of the kernel module, it is impossible to enable the opposite order in our block export code because userspace is not notified when a virtqueue is enabled. This requirement also mathces the normal initialisation order as done by the generic vhost code in QEMU. However, commit 6c482547 accidentally changed the order for vdpa-dev and broke access to VDUSE devices with this. This changes vdpa-dev to use the normal order again and use the standard vhost callback .vhost_set_vring_enable for this. VDUSE devices can be used with vdpa-dev again after this fix. vhost_net intentionally avoided enabling the vrings for vdpa and does this manually later while it does enable them for other vhost backends. Reflect this in the vhost_net code and return early for vdpa, so that the behaviour doesn't change for this device. Cc: qemu-stable@nongnu.org Fixes: 6c4825476a43 ('vdpa: move vhost_vdpa_set_vring_ready to the caller') Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-ID: <20240315155949.86066-1-kwolf@redhat.com> Reviewed-by: Eugenio Pérez <eperezma@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2024-03-13Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu ↵Peter Maydell
into staging virtio,pc,pci: features, cleanups, fixes more memslots support in libvhost-user support PCIe Gen5/Gen6 link speeds in pcie more traces in vdpa network simulation devices support in vdpa SMBIOS type 9 descriptor implementation Bump max_cpus to 4096 vcpus in q35 aw-bits and granule options in VIRTIO-IOMMU Support report NUMA nodes for device memory using GI in acpi Beginning of shutdown event support in pvpanic fixes, cleanups all over the place. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # -----BEGIN PGP SIGNATURE----- # # iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmXw0TMPHG1zdEByZWRo # YXQuY29tAAoJECgfDbjSjVRp8x4H+gLMoGwaGAX7gDGPgn2Ix4j/3kO77ZJ9X9k/ # 1KqZu/9eMS1j2Ei+vZqf05w7qRjxxhwDq3ilEXF/+UFqgAehLqpRRB8j5inqvzYt # +jv0DbL11PBp/oFjWcytm5CbiVsvq8KlqCF29VNzc162XdtcduUOWagL96y8lJfZ # uPrOoyeR7SMH9lp3LLLHWgu+9W4nOS03RroZ6Umj40y5B7yR0Rrppz8lMw5AoQtr # 0gMRnFhYXeiW6CXdz+Tzcr7XfvkkYDi/j7ibiNSURLBfOpZa6Y8+kJGKxz5H1K1G # 6ZY4PBcOpQzl+NMrktPHogczgJgOK10t+1i/R3bGZYw2Qn/93Eg= # =C0UU # -----END PGP SIGNATURE----- # gpg: Signature made Tue 12 Mar 2024 22:03:31 GMT # gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469 # gpg: issuer "mst@redhat.com" # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full] # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full] # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (68 commits) docs/specs/pvpanic: document shutdown event hw/cxl: Fix missing reserved data in CXL Device DVSEC hmat acpi: Fix out of bounds access due to missing use of indirection hmat acpi: Do not add Memory Proximity Domain Attributes Structure targetting non existent memory. qemu-options.hx: Document the virtio-iommu-pci aw-bits option hw/arm/virt: Set virtio-iommu aw-bits default value to 48 hw/i386/q35: Set virtio-iommu aw-bits default value to 39 virtio-iommu: Add an option to define the input range width virtio-iommu: Trace domain range limits as unsigned int qemu-options.hx: Document the virtio-iommu-pci granule option virtio-iommu: Change the default granule to the host page size virtio-iommu: Add a granule property hw/i386/acpi-build: Add support for SRAT Generic Initiator structures hw/acpi: Implement the SRAT GI affinity structure qom: new object to associate device to NUMA node hw/i386/pc: Inline pc_cmos_init() into pc_cmos_init_late() and remove it hw/i386/pc: Set "normal" boot device order in pc_basic_device_init() hw/i386/pc: Avoid one use of the current_machine global hw/i386/pc: Remove "rtc_state" link again Revert "hw/i386/pc: Confine system flash handling to pc_sysfw" ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # hw/core/machine.c
2024-03-12virtio-iommu: Add an option to define the input range widthEric Auger
aw-bits is a new option that allows to set the bit width of the input address range. This value will be used as a default for the device config input_range.end. By default it is set to 64 bits which is the current value. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Reviewed-by: Cédric Le Goater <clg@redhat.com> Message-Id: <20240307134445.92296-7-eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2024-03-12virtio-iommu: Trace domain range limits as unsigned intEric Auger
Use %u format to trace domain_range limits. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Reviewed-by: Cédric Le Goater <clg@redhat.com> Message-Id: <20240307134445.92296-6-eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2024-03-12virtio-iommu: Change the default granule to the host page sizeEric Auger
We used to set the default granule to 4KB but with VFIO assignment it makes more sense to use the actual host page size. Indeed when hotplugging a VFIO device protected by a virtio-iommu on a 64kB/64kB host/guest config, we current get a qemu crash: "vfio: DMA mapping failed, unable to continue" This is due to the hot-attached VFIO device calling memory_region_iommu_set_page_size_mask() with 64kB granule whereas the virtio-iommu granule was already frozen to 4KB on machine init done. Set the granule property to "host" and introduce a new compat. The page size mask used before 9.0 was qemu_target_page_mask(). Since the virtio-iommu currently only supports x86_64 and aarch64, this matched a 4KB granule. Note that the new default will prevent 4kB guest on 64kB host because the granule will be set to 64kB which would be larger than the guest page size. In that situation, the virtio-iommu driver fails on viommu_domain_finalise() with "granule 0x10000 larger than system page size 0x1000". In that case the workaround is to request 4K granule. The current limitation of global granule in the virtio-iommu should be removed and turned into per domain granule. But until we get this upgraded, this new default is probably better because I don't think anyone is currently interested in running a 4KB page size guest with virtio-iommu on a 64KB host. However supporting 64kB guest on 64kB host with virtio-iommu and VFIO looks a more important feature. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Message-Id: <20240307134445.92296-4-eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2024-03-12virtio-iommu: Add a granule propertyEric Auger
This allows to choose which granule will be used by default by the virtio-iommu. Current page size mask default is qemu_target_page_mask so this translates into a 4k granule on ARM and x86_64 where virtio-iommu is supported. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Message-Id: <20240307134445.92296-3-eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2024-03-12hw/virtio: Add support for VDPA network simulation devicesHao Chen
This patch adds support for VDPA network simulation devices. The device is developed based on virtio-net and tap backend, and supports hardware live migration function. For more details, please refer to "docs/system/devices/vdpa-net.rst" Signed-off-by: Hao Chen <chenh@yusur.tech> Message-Id: <20240221073802.2888022-1-chenh@yusur.tech> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2024-03-12hw/virtio: check owner for removing objectsAlbert Esteve
Shared objects lack spoofing protection. For VHOST_USER_BACKEND_SHARED_OBJECT_REMOVE messages received by the vhost-user interface, any backend was allowed to remove entries from the shared table just by knowing the UUID. Only the owner of the entry shall be allowed to removed their resources from the table. To fix that, add a check for all *SHARED_OBJECT_REMOVE messages received. A vhost device can only remove TYPE_VHOST_DEV entries that are owned by them, otherwise skip the removal, and inform the device that the entry has not been removed in the answer. Signed-off-by: Albert Esteve <aesteve@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20240219143423.272012-2-aesteve@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2024-03-12vdpa: trace skipped memory sectionsEugenio Pérez
Sometimes, certain parts are not being skipped in vhost_vdpa_listener_region_del, but they are skipped in vhost_vdpa_listener_region_add, or vice versa. The vhost-vdpa code expects all parts to maintain their properties, so we're adding a trace to help with debugging when any part is skipped. Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Message-Id: <20240215103616.330518-3-eperezma@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2024-03-12vdpa: stash memory region properties in varsEugenio Pérez
Next changes uses this variables, so avoid call repeatedly to memory region functions. No functional change intended. Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Message-Id: <20240215103616.330518-2-eperezma@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2024-03-12vdpa: fix network breakage after cancelling migrationSi-Wei Liu
Fix an issue where cancellation of ongoing migration ends up with no network connectivity. When canceling migration, SVQ will be switched back to the passthrough mode, but the right call fd is not programed to the device and the svq's own call fd is still used. At the point of this transitioning period, the shadow_vqs_enabled hadn't been set back to false yet, causing the installation of call fd inadvertently bypassed. Message-Id: <1707910082-10243-13-git-send-email-si-wei.liu@oracle.com> Fixes: a8ac88585da1 ("vhost: Add Shadow VirtQueue call forwarding capabilities") Cc: Eugenio Pérez <eperezma@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2024-03-12vdpa: add vhost_vdpa_set_dev_vring_base trace for svq modeSi-Wei Liu
For better debuggability and observability. Message-Id: <1707910082-10243-8-git-send-email-si-wei.liu@oracle.com> Reviewed-by: Eugenio Pérez <eperezma@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2024-03-12vdpa: add vhost_vdpa_get_vring_base trace for svq modeSi-Wei Liu
For better debuggability and observability. Message-Id: <1707910082-10243-7-git-send-email-si-wei.liu@oracle.com> Reviewed-by: Eugenio Pérez <eperezma@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2024-03-12vdpa: factor out vhost_vdpa_last_devSi-Wei Liu
Generalize duplicated condition check for the last vq of vdpa device to a common function. Message-Id: <1707910082-10243-4-git-send-email-si-wei.liu@oracle.com> Reviewed-by: Eugenio Pérez <eperezma@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2024-03-12Merge tag 'pull-request-2024-03-12' of https://gitlab.com/thuth/qemu into ↵Peter Maydell
staging * Add missing ERRP_GUARD() statements in functions that need it * Prefer fast cpu_env() over slower CPU QOM cast macro # -----BEGIN PGP SIGNATURE----- # # iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmXwPhYRHHRodXRoQHJl # ZGhhdC5jb20ACgkQLtnXdP5wLbWHvBAAgKx5LHFjz3xREVA+LkDTQ49mz0lK3s32 # SGvNlIHjiaDGVttVYhVC4sinBWUruG4Lyv/2QN72OJBzn6WUsEUQE3KPH1d7Y3/s # wS9X7mj70n4kugWJqeIJP5AXSRasHmWoQ4QJLVQRJd6+Eb9jqwep0x7bYkI1de6D # bL1Q7bIfkFeNQBXaiPWAm2i+hqmT4C1r8HEAGZIjAsMFrjy/hzBEjNV+pnh6ZSq9 # Vp8BsPWRfLU2XHm4WX0o8d89WUMAfUGbVkddEl/XjIHDrUD+Zbd1HAhLyfhsmrnE # jXIwSzm+ML1KX4MoF5ilGtg8Oo0gQDEBy9/xck6G0HCm9lIoLKlgTxK9glr2vdT8 # yxZmrM9Hder7F9hKKxmb127xgU6AmL7rYmVqsoQMNAq22D6Xr4UDpgFRXNk2/wO6 # zZZBkfZ4H4MpZXbd/KJpXvYH5mQA4IpkOy8LJdE+dbcHX7Szy9ksZdPA+Z10hqqf # zqS13qTs3abxymy2Q/tO3hPKSJCk1+vCGUkN60Wm+9VoLWGoU43qMc7gnY/pCS7m # 0rFKtvfwFHhokX1orK0lP/ppVzPv/5oFIeK8YDY9if+N+dU2LCwVZHIuf2/VJPRq # wmgH2vAn3JDoRKPxTGX9ly6AMxuZaeP92qBTOPap0gDhihYzIpaCq9ecEBoTakI7 # tdFhV0iRr08= # =NiP4 # -----END PGP SIGNATURE----- # gpg: Signature made Tue 12 Mar 2024 11:35:50 GMT # gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5 # gpg: issuer "thuth@redhat.com" # gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full] # gpg: aka "Thomas Huth <thuth@redhat.com>" [full] # gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full] # gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown] # Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5 * tag 'pull-request-2024-03-12' of https://gitlab.com/thuth/qemu: (55 commits) user: Prefer fast cpu_env() over slower CPU QOM cast macro target/xtensa: Prefer fast cpu_env() over slower CPU QOM cast macro target/tricore: Prefer fast cpu_env() over slower CPU QOM cast macro target/sparc: Prefer fast cpu_env() over slower CPU QOM cast macro target/sh4: Prefer fast cpu_env() over slower CPU QOM cast macro target/rx: Prefer fast cpu_env() over slower CPU QOM cast macro target/ppc: Prefer fast cpu_env() over slower CPU QOM cast macro target/openrisc: Prefer fast cpu_env() over slower CPU QOM cast macro target/nios2: Prefer fast cpu_env() over slower CPU QOM cast macro target/mips: Prefer fast cpu_env() over slower CPU QOM cast macro target/microblaze: Prefer fast cpu_env() over slower CPU QOM cast macro target/m68k: Prefer fast cpu_env() over slower CPU QOM cast macro target/loongarch: Prefer fast cpu_env() over slower CPU QOM cast macro target/i386/hvf: Use CPUState typedef target/hexagon: Prefer fast cpu_env() over slower CPU QOM cast macro target/cris: Prefer fast cpu_env() over slower CPU QOM cast macro target/avr: Prefer fast cpu_env() over slower CPU QOM cast macro target/alpha: Prefer fast cpu_env() over slower CPU QOM cast macro target: Replace CPU_GET_CLASS(cpu -> obj) in cpu_reset_hold() handler bulk: Call in place single use cpu_env() ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-03-12bulk: Access existing variables initialized to &S->F when availablePhilippe Mathieu-Daudé
When a variable is initialized to &struct->field, use it in place. Rationale: while this makes the code more concise, this also helps static analyzers. Mechanical change using the following Coccinelle spatch script: @@ type S, F; identifier s, m, v; @@ S *s; ... F *v = &s->m; <+... - &s->m + v ...+> Inspired-by: Zhao Liu <zhao1.liu@intel.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-ID: <20240129164514.73104-2-philmd@linaro.org> Acked-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Zhao Liu <zhao1.liu@intel.com> Reviewed-by: Anthony PERARD <anthony.perard@citrix.com> [thuth: Dropped hunks that need a rebase, and fixed sizeof() in pmu_realize()] Signed-off-by: Thomas Huth <thuth@redhat.com>
2024-03-12hw/virtio/vhost: Fix missing ERRP_GUARD() for error_prepend()Zhao Liu
As the comment in qapi/error, passing @errp to error_prepend() requires ERRP_GUARD(): * = Why, when and how to use ERRP_GUARD() = * * Without ERRP_GUARD(), use of the @errp parameter is restricted: ... * - It should not be passed to error_prepend(), error_vprepend() or * error_append_hint(), because that doesn't work with &error_fatal. * ERRP_GUARD() lifts these restrictions. * * To use ERRP_GUARD(), add it right at the beginning of the function. * @errp can then be used without worrying about the argument being * NULL or &error_fatal. ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user can't see this additional information, because exit() happens in error_setg earlier than information is added [1]. In hw/virtio/vhost.c, there are 2 functions passing @errp to error_prepend() without ERRP_GUARD(): - vhost_save_backend_state() - vhost_load_backend_state() Their @errp both points to callers' @local_err. However, as the APIs defined in include/hw/virtio/vhost.h, it is necessary to protect their @errp with ERRP_GUARD(). To follow the requirement of @errp, add missing ERRP_GUARD() at their beginning. [1]: Issue description in the commit message of commit ae7c80a7bd73 ("error: New macro ERRP_GUARD()"). Cc: "Michael S. Tsirkin" <mst@redhat.com> Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Message-ID: <20240311033822.3142585-27-zhao1.liu@linux.intel.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2024-03-12hw/virtio/vhost-vsock: Fix missing ERRP_GUARD() for error_prepend()Zhao Liu
As the comment in qapi/error, passing @errp to error_prepend() requires ERRP_GUARD(): * = Why, when and how to use ERRP_GUARD() = * * Without ERRP_GUARD(), use of the @errp parameter is restricted: ... * - It should not be passed to error_prepend(), error_vprepend() or * error_append_hint(), because that doesn't work with &error_fatal. * ERRP_GUARD() lifts these restrictions. * * To use ERRP_GUARD(), add it right at the beginning of the function. * @errp can then be used without worrying about the argument being * NULL or &error_fatal. ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user can't see this additional information, because exit() happens in error_setg earlier than information is added [1]. The vhost_vsock_device_realize() passes @errp to error_prepend(), and as a VirtioDeviceClass.realize method, its @errp is from DeviceClass.realize so that there is no guarantee that the @errp won't point to @error_fatal. To avoid the issue like [1] said, add missing ERRP_GUARD() at the beginning of this function. [1]: Issue description in the commit message of commit ae7c80a7bd73 ("error: New macro ERRP_GUARD()"). Cc: "Michael S. Tsirkin" <mst@redhat.com> Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Message-ID: <20240311033822.3142585-26-zhao1.liu@linux.intel.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2024-03-11migration: remove migration.h referencesSteve Sistare
Remove migration.h from files that no longer need it due to previous commits. Signed-off-by: Steve Sistare <steven.sistare@oracle.com> Link: https://lore.kernel.org/r/1710179338-294359-2-git-send-email-steven.sistare@oracle.com Signed-off-by: Peter Xu <peterx@redhat.com>
2024-03-11migration: export fewer optionsSteve Sistare
A small number of migration options are accessed by migration clients, but to see them clients must include all of options.h, which is mostly for migration core code. migrate_mode() in particular will be needed by multiple clients. Refactor the option declarations so clients can see the necessary few via misc.h, which already exports a portion of the client API. Signed-off-by: Steve Sistare <steven.sistare@oracle.com> Link: https://lore.kernel.org/r/1710179319-294320-1-git-send-email-steven.sistare@oracle.com Signed-off-by: Peter Xu <peterx@redhat.com>
2024-02-28migration: remove error from notifier dataSteve Sistare
Remove the error object from opaque data passed to notifiers. Use the new error parameter passed to the notifier instead. Signed-off-by: Steve Sistare <steven.sistare@oracle.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Link: https://lore.kernel.org/r/1708622920-68779-3-git-send-email-steven.sistare@oracle.com Signed-off-by: Peter Xu <peterx@redhat.com>
2024-02-28notify: pass error to notifier with returnSteve Sistare
Pass an error object as the third parameter to "notifier with return" notifiers, so clients no longer need to bundle an error object in the opaque data. The new parameter is used in a later patch. Signed-off-by: Steve Sistare <steven.sistare@oracle.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Link: https://lore.kernel.org/r/1708622920-68779-2-git-send-email-steven.sistare@oracle.com Signed-off-by: Peter Xu <peterx@redhat.com>
2024-02-14virtio_iommu: Clear IOMMUPciBus pointer cache when system resetZhenzhong Duan
s->iommu_pcibus_by_bus_num is a IOMMUPciBus pointer cache indexed by bus number, bus number may not always be a fixed value, i.e., guest reboot to different kernel which set bus number with different algorithm. This could lead to endpoint binding to wrong iommu MR in virtio_iommu_get_endpoint(), then vfio device setup wrong mapping from other device. Remove the memset in virtio_iommu_device_realize() to avoid redundancy with memset in system reset. Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Message-Id: <20240125073706.339369-2-zhenzhong.duan@intel.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2024-02-14hw/virtio: derive vhost-user-input from vhost-user-baseLeo Yan
This patch derives vhost-user-input from vhost-user-base class, so make the input stub as a simpler boilerplate wrapper. With the refactoring, vhost-user-input adds the property 'chardev', this leads to conflict with the vhost-user-input-pci adds the same property. To resolve the error, remove the duplicate property from vhost-user-input-pci. Signed-off-by: Leo Yan <leo.yan@linaro.org> Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org> Message-Id: <20231120043721.50555-5-leo.yan@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20240104210945.1223134-12-alex.bennee@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2024-02-14hw/virtio: Move vhost-user-input into virtio folderLeo Yan
vhost-user-input is in the input folder. On the other hand, the folder 'hw/virtio' maintains other virtio stubs (e.g. I2C, RNG, GPIO, etc). This patch moves vhost-user-input into the virtio folder for better code organization. No functionality change. Signed-off-by: Leo Yan <leo.yan@linaro.org> Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org> Message-Id: <20231120043721.50555-4-leo.yan@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20240104210945.1223134-11-alex.bennee@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2024-02-14hw/virtio: Support set_config() callback in vhost-user-baseLeo Yan
The Virtio input device invokes set_config() callback for retrieving the event configuration info, but the callback is not supported in vhost-user-base. This patch adds support set_config() callback in vhost-user-base. Signed-off-by: Leo Yan <leo.yan@linaro.org> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20231120043721.50555-2-leo.yan@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20240104210945.1223134-9-alex.bennee@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2024-02-14hw/virtio: add vhost-user-snd and vhost-user-snd-pci devicesManos Pitsidianakis
Tested with rust-vmm vhost-user-sound daemon: RUST_LOG=trace cargo run --bin vhost-user-sound -- --socket /tmp/snd.sock --backend null Invocation: qemu-system-x86_64 \ -qmp unix:./qmp-sock,server,wait=off \ -m 4096 \ -numa node,memdev=mem \ -object memory-backend-file,id=mem,size=4G,mem-path=/dev/shm,share=on \ -D qemu.log \ -d guest_errors,trace:\*snd\*,trace:\*sound\*,trace:\*vhost\* \ -chardev socket,id=vsnd,path=/tmp/snd.sock \ -device vhost-user-snd-pci,chardev=vsnd,id=snd \ /path/to/disk [AJB: imported from https://github.com/epilys/qemu-virtio-snd/commit/54ae1cdd15fef2d88e9e387a175f099a38c636f4.patch] Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org> Message-Id: <20240104210945.1223134-7-alex.bennee@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2024-02-14hw/virtio: derive vhost-user-i2c from vhost-user-baseAlex Bennée
Now we can take advantage of the new base class and make vhost-user-i2c a much simpler boilerplate wrapper. Also as this doesn't require any target specific hacks we only need to build the stubs once. Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20240104210945.1223134-6-alex.bennee@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2024-02-14hw/virtio: derive vhost-user-gpio from vhost-user-baseAlex Bennée
Now the new base class supports config handling we can take advantage and make vhost-user-gpio a much simpler boilerplate wrapper. Also as this doesn't require any target specific hacks we only need to build the stubs once. Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20240104210945.1223134-5-alex.bennee@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2024-02-14hw/virtio: derive vhost-user-rng from vhost-user-baseAlex Bennée
Now we can take advantage of our new base class and make vhost-user-rng a much simpler boilerplate wrapper. Also as this doesn't require any target specific hacks we only need to build the stubs once. Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20240104210945.1223134-4-alex.bennee@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2024-02-14hw/virtio: convert vhost-user-base to async shutdownAlex Bennée
We are about to convert at least one stubs which was using the async teardown so lets use it for all the cases. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20240104210945.1223134-3-alex.bennee@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2024-02-14virtio: split into vhost-user-base and vhost-user-deviceAlex Bennée
Lets keep a cleaner split between the base class and the derived vhost-user-device which we can use for generic vhost-user stubs. This includes an update to introduce the vq_size property so the number of entries in a virtq can be defined. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20240104210945.1223134-2-alex.bennee@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2024-02-08Merge tag 'for-upstream' of https://repo.or.cz/qemu/kevin into stagingPeter Maydell
Block layer patches - Allow concurrent BB context changes - virtio: Re-enable notifications after drain - virtio-blk: Fix missing use of irqfd - scsi: Don't ignore most usb-storage properties - blkio: Respect memory-alignment for bounce buffer allocations - iotests tmpdir fixes - virtio-blk: Code cleanups # -----BEGIN PGP SIGNATURE----- # # iQJFBAABCAAvFiEE3D3rFZqa+V09dFb+fwmycsiPL9YFAmXEkwgRHGt3b2xmQHJl # ZGhhdC5jb20ACgkQfwmycsiPL9Y3jA//TmSBVqHljauyImYOgCt8qCXACttV0xhQ # Q5ldUNx/JmIFMoUR7OlpVAL2MtvdwE0jjY+sDlEmWtz4IFJcCsCTUCHZZb8blreb # +mnMkqrQ6Nb3tPR2jeIknrXqNy1ffyjZItktjWXVcl6jaHB8YabHHqszs9DIaf4n # lcKovBKxula8ckMgvm48wCwTtS7VEPeuC5FrOqUqTtuhg+QKp5ZVoyVFHtf6GKTD # iuXzCd4yxu4fDKAthJJj4N1bQaOmCKU7K9N/665wj9P2TyfmwlBAfNwNAlYbdX1E # Sv7eSioQs2+oUxmfD/PUsF7wTYtDCrSAUFn1kP/XdRyXPJR3dHGiBKV9w9CaWNrU # y8rqOhxVcuoBLRljTF32BK4HniAREjRngtpT2FnQQIyedZrXIwyTAWjs+LW12T6O # NMiU603Nl9ZYhO1et2+qspsVpNIfEpQWpK+OCon6E+ggj1ea+pfqU30VPx4JU05I # VLiydluIbehSkRlTHgFcTgApmx843OGW7CvWfRyen86Cexgx3DEjJUQ4/bYqaCha # yLIi91rToSDmtlzJrg9eYiMs5Y6vz+ORvvX5im1RlbUUb7Kx/LaA4BU/uArEbBt8 # xXm/grO4hFUGqtLgd2LIjWaHSsLoW4jKeEiExFUUfvH5DG9Zl5HmzFwu+DYxX+im # MJLLetDJAWI= # =8tc0 # -----END PGP SIGNATURE----- # gpg: Signature made Thu 08 Feb 2024 08:38:32 GMT # gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6 # gpg: issuer "kwolf@redhat.com" # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full] # Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6 * tag 'for-upstream' of https://repo.or.cz/qemu/kevin: virtio-blk: avoid using ioeventfd state in irqfd conditional virtio-blk: Use ioeventfd_attach in start_ioeventfd virtio: Re-enable notifications after drain virtio-scsi: Attach event vq notifier with no_poll blkio: Respect memory-alignment for bounce buffer allocations scsi: Don't ignore most usb-storage properties virtio-blk: do not use C99 mixed declarations iotests: give tempdir an identifying name iotests: fix leak of tmpdir in dry-run mode scsi: Await request purging block-backend: Allow concurrent context changes monitor: use aio_co_reschedule_self() virtio-blk: declare VirtIOBlock::rq with a type virtio-blk: add vq_rq[] bounds check in virtio_blk_dma_restart_cb() virtio-blk: clarify that there is at least 1 virtqueue virtio-blk: enforce iothread-vq-mapping validation Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-07virtio: Re-enable notifications after drainHanna Czenczek
During drain, we do not care about virtqueue notifications, which is why we remove the handlers on it. When removing those handlers, whether vq notifications are enabled or not depends on whether we were in polling mode or not; if not, they are enabled (by default); if so, they have been disabled by the io_poll_start callback. Because we do not care about those notifications after removing the handlers, this is fine. However, we have to explicitly ensure they are enabled when re-attaching the handlers, so we will resume receiving notifications. We do this in virtio_queue_aio_attach_host_notifier*(). If such a function is called while we are in a polling section, attaching the notifiers will then invoke the io_poll_start callback, re-disabling notifications. Because we will always miss virtqueue updates in the drained section, we also need to poll the virtqueue once after attaching the notifiers. Buglink: https://issues.redhat.com/browse/RHEL-3934 Signed-off-by: Hanna Czenczek <hreitz@redhat.com> Message-ID: <20240202153158.788922-3-hreitz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2024-02-06oslib-posix: initialize backend memory objects in parallelMark Kanda
QEMU initializes preallocated backend memory as the objects are parsed from the command line. This is not optimal in some cases (e.g. memory spanning multiple NUMA nodes) because the memory objects are initialized in series. Allow the initialization to occur in parallel (asynchronously). In order to ensure optimal thread placement, asynchronous initialization requires prealloc context threads to be in use. Signed-off-by: Mark Kanda <mark.kanda@oracle.com> Message-ID: <20240131165327.3154970-2-mark.kanda@oracle.com> Tested-by: Mario Casquero <mcasquer@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com>
2024-01-30acpi: Clean up includesPeter Maydell
This commit was created with scripts/clean-includes: ./scripts/clean-includes --git acpi include/hw/*/*acpi.h hw/*/*acpi.c All .c should include qemu/osdep.h first. The script performs three related cleanups: * Ensure .c files include qemu/osdep.h first. * Including it in a .h is redundant, since the .c already includes it. Drop such inclusions. * Likewise, including headers qemu/osdep.h includes is redundant. Drop these, too. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Zhao Liu <zhao1.liu@intel.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-01-10hw/arm/virt-acpi-build.c: Migrate virtio creation to common locationSunil V L
RISC-V also needs to create the virtio in DSDT in the same way as ARM. So, instead of duplicating the code, move this function to the device specific file which is common across architectures. Suggested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Sunil V L <sunilvl@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Message-ID: <20231218150247.466427-3-sunilvl@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2024-01-05misc: Simplify qemu_prealloc_mem() callsPhilippe Mathieu-Daudé
Since qemu_prealloc_mem() returns whether or not an error occured, we don't need to check the @errp pointer. Remove local_err uses when we can return directly. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org> Reviewed-by: Gavin Shan <gshan@redhat.com> Message-Id: <20231120213301.24349-20-philmd@linaro.org>
2024-01-04Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into stagingPeter Maydell
* configure: use a native non-cross compiler for linux-user * meson: cleanups * target/i386: miscellaneous cleanups and optimizations * target/i386: implement CMPccXADD * target/i386: the sgx_epc_get_section stub is reachable * esp: check for NULL result from scsi_device_find() # -----BEGIN PGP SIGNATURE----- # # iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmWRImYUHHBib256aW5p # QHJlZGhhdC5jb20ACgkQv/vSX3jHroNd7AgAgcyJGiMfUkXqhefplpm06RDXQIa8 # FuoJqPb21lO75DQKfaFRAc4xGLagjJROMJGHMm9HvMu2VlwvOydkQlfFRspENxQ/ # 5XzGdb/X0A7HA/mwUfnMB1AZx0Vs32VI5IBSc6acc9fmgeZ84XQEoM3KBQHUik7X # mSkE4eltR9gJ+4IaGo4voZtK+YoVD8nEcuqmnKihSPWizev0FsZ49aNMtaYa9qC/ # Xs3kiQd/zPibHDHJu0ulFsNZgxtUcvlLHTCf8gO4dHWxCFLXGubMush83McpRtNB # Qoh6cTLH+PBXfrxMR3zmTZMNvo8Euls3s07Y8TkNP4vdIIE/kMeMDW1wJw== # =mq30 # -----END PGP SIGNATURE----- # gpg: Signature made Sun 31 Dec 2023 08:12:22 GMT # gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83 # gpg: issuer "pbonzini@redhat.com" # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (46 commits) meson.build: report graphics backends separately configure, meson: rename targetos to host_os meson: rename config_all meson: remove CONFIG_ALL meson: remove config_targetos meson: remove CONFIG_POSIX and CONFIG_WIN32 from config_targetos meson: remove OS definitions from config_targetos meson: always probe u2f and canokey if the option is enabled meson: move subdirs to "Collect sources" section meson: move config-host.h definitions together meson: move CFI detection code with other compiler flags meson: keep subprojects together meson: move accelerator dependency checks together meson: move option validation together meson: move program checks together meson: add more sections to main meson.build configure: unify again the case arms in probe_target_compiler configure: remove unnecessary subshell Makefile: clean qemu-iotests output meson: use version_compare() to compare version ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-12-31meson: remove CONFIG_ALLPaolo Bonzini
CONFIG_ALL is tricky to use and was ported over to Meson from the recursive processing of Makefile variables. Meson sourcesets however have all_sources() and all_dependencies() methods that remove the need for it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-12-30hw/virtio: Constify VMStateRichard Henderson
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20231221031652.119827-61-richard.henderson@linaro.org>
2023-12-26vdpa: move memory listener to vhost_vdpa_sharedEugenio Pérez
Next patches will register the vhost_vdpa memory listener while the VM is migrating at the destination, so we can map the memory to the device before stopping the VM at the source. The main goal is to reduce the downtime. However, the destination QEMU is unaware of which vhost_vdpa device will register its memory_listener. If the source guest has CVQ enabled, it will be the CVQ device. Otherwise, it will be the first one. Move the memory listener to a common place rather than always in the first / last vhost_vdpa. Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20231221174322.3130442-14-eperezma@redhat.com> Tested-by: Lei Yang <leiyang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-12-26vdpa: use dev_shared in vdpa_iommuEugenio Pérez
The memory listener functions can call these too. Make vdpa_iommu work with VhostVDPAShared. Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20231221174322.3130442-13-eperezma@redhat.com> Tested-by: Lei Yang <leiyang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-02-20 09:54:48 +0000