aboutsummaryrefslogtreecommitdiff
path: root/hw/virtio
AgeCommit message (Collapse)Author
2018-03-02qapi: Empty out qapi-schema.jsonMarkus Armbruster
The previous commit improved compile time by including less of the generated QAPI headers. This is impossible for stuff defined directly in qapi-schema.json, because that ends up in headers that that pull in everything. Move everything but include directives from qapi-schema.json to new sub-module qapi/misc.json, then include just the "misc" shard where possible. It's possible everywhere, except: * monitor.c needs qmp-command.h to get qmp_init_marshal() * monitor.c, ui/vnc.c and the generated qapi-event-FOO.c need qapi-event.h to get enum QAPIEvent Perhaps we'll get rid of those some other day. Adding a type to qapi/migration.json now recompiles some 120 instead of 2300 out of 5100 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180211093607.27351-25-armbru@redhat.com> [eblake: rebase to master] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-03-01cryptodev-vhost-user: add crypto session handlerGonglei
Introduce two vhost-user meassges: VHOST_USER_CREATE_CRYPTO_SESSION and VHOST_USER_CLOSE_CRYPTO_SESSION. At this point, the QEMU side support crypto operation in cryptodev host-user backend. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com> Signed-off-by: Jay Zhou <jianjay.zhou@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-01cryptodev: add vhost supportGonglei
Impliment the vhost-crypto's funtions, such as startup, stop and notification etc. Introduce an enum QCryptoCryptoDevBackendOptionsType in order to identify the cryptodev vhost backend is vhost-user or vhost-kernel-module (If exist). At this point, the cryptdoev-vhost-user works. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com> Signed-off-by: Jay Zhou <jianjay.zhou@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-01vhost: fix incorrect check in vhost_verify_ring_mappingsJia He
In commit 0ca1fd2d6878 ("vhost: Simplify ring verification checks"), it checks the virtqueue desc mapping for 3 times. Fixed: commit 0ca1fd2d6878 ("vhost: Simplify ring verification checks") Signed-off-by: Jia He <jia.he@hxt-semitech.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-03-01vhost: avoid to start/stop virtqueue which is not readyJia He
In our Armv8a server, we try to configure the vhost scsi but fail to boot up the guest (-machine virt-2.10). The guest's boot failure is very early, even earlier than grub. There are 3 virtqueues (ctrl, event and cmd) for virtio scsi device, but ovmf and seabios will only set the physical address for the 3rd one (cmd). Then in vhost_virtqueue_start(), virtio_queue_get_desc_addr will be 0 for ctrl and event vq when qemu negotiates with ovmf. So vhost_memory_map fails with ENOMEM. This patch just fixs it by early quitting the virtqueue start/stop when virtio_queue_get_desc_addr is 0. Btw, after guest kernel starts, all the 3 queues will be initialized and set address correctly. Already tested on Arm64 and X86_64 qemu. Signed-off-by: Jia He <jia.he@hxt-semitech.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-01vhost: fix memslot limit checkJay Zhou
Since used_memslots will be updated to the actual value after registering memory listener for the first time, move the memslots limit checking to the right place. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Jay Zhou <jianjay.zhou@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-01virtio-pci: trivial fixes in error messageGreg Kurz
Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-02-13Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
virtio,vhost,pci,pc: features, fixes and cleanups - new stats in virtio balloon - virtio eventfd rework for boot speedup - vhost memory rework for boot speedup - fixes and cleanups all over the place Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Tue 13 Feb 2018 16:29:55 GMT # gpg: using RSA key 281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: (22 commits) virtio-balloon: include statistics of disk/file caches acpi-test: update FADT lpc: drop pcie host dependency tests: acpi: fix FADT not being compared to reference table hw/pci-bridge: fix pcie root port's IO hints capability libvhost-user: Support across-memory-boundary access libvhost-user: Fix resource leak virtio-balloon: unref the memory region before continuing pci: removed the is_express field since a uniform interface was inserted virtio-blk: enable multiple vectors when using multiple I/O queues pci/bus: let it has higher migration priority pci-bridge/i82801b11: clear bridge registers on platform reset vhost: Move log_dirty check vhost: Merge and delete unused callbacks vhost: Clean out old vhost_set_memory and friends vhost: Regenerate region list from changed sections list vhost: Merge sections added to temporary list vhost: Simplify ring verification checks vhost: Build temporary section list and deref after commit virtio: improve virtio devices initialization time ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-13virtio-balloon: include statistics of disk/file cachesTomáš Golembiovský
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-02-13virtio-balloon: unref the memory region before continuingTiwei Bie
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com> Cc: qemu-stable@nongnu.org Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-02-09Include qapi/error.h exactly where neededMarkus Armbruster
This cleanup makes the number of objects depending on qapi/error.h drop from 1910 (out of 4743) to 1612 in my "build everything" tree. While there, separate #include from file comment with a blank line, and drop a useless comment on why qemu/osdep.h is included first. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-5-armbru@redhat.com> [Semantic conflict with commit 34e304e975 resolved, OSX breakage fixed]
2018-02-08virtio-blk: enable multiple vectors when using multiple I/O queuesChangpeng Liu
Currently virtio-pci driver hardcoded 2 vectors for virtio-blk device, for multiple I/O queues scenario, all the I/O queues will share one interrupt vector, while here, enable multiple vectors according to the number of I/O queues. Signed-off-by: Changpeng Liu <changpeng.liu@intel.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-02-08vhost: Move log_dirty checkDr. David Alan Gilbert
Move the log_dirty check into vhost_section. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-02-08vhost: Merge and delete unused callbacksDr. David Alan Gilbert
Now that the olf vhost_set_memory code is gone, the _nop and _add callbacks are identical and can be merged. The _del callback is no longer needed. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-02-08vhost: Clean out old vhost_set_memory and friendsDr. David Alan Gilbert
Remove the old update mechanism, vhost_set_memory, and the functions and flags it used. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-02-08vhost: Regenerate region list from changed sections listDr. David Alan Gilbert
Compare the sections list that's just been generated, and if it's different from the old one regenerate the region list. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2018-02-08vhost: Merge sections added to temporary listDr. David Alan Gilbert
As sections are reported by the listener to the _nop and _add methods, add them to the temporary section list but now merge them with the previous section if the new one abuts and the backend allows. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-02-08vhost: Simplify ring verification checksDr. David Alan Gilbert
vhost_verify_ring_mappings() were used to verify that rings are still accessible and related memory hasn't been moved after flatview is updated. It was doing checks by mapping ring's GPA+len and checking that HVA hadn't changed with new memory map. To avoid maybe expensive mapping call, we were identifying address range that changed and were doing mapping only if ring was in changed range. However it's not neccessary to perform ring's GPA mapping as we already have its current HVA and all we need is to verify that ring's GPA translates to the same HVA in updated flatview. This will allow the following patches to simplify the range comparison that was previously needed to avoid expensive verify_ring_mapping calls. Signed-off-by: Igor Mammedov <imammedo@redhat.com> with modifications by: Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-02-08vhost: Build temporary section list and deref after commitDr. David Alan Gilbert
Igor spotted that there's a race, where a region that's unref'd in a _del callback might be free'd before the set_mem_table call in the _commit callback, and thus the vhost might end up using free memory. Fix this by building a complete temporary sections list, ref'ing every section (during add and nop) and then unref'ing the whole list right at the end of commit. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-02-08virtio: improve virtio devices initialization timeGal Hammer
The loading time of a VM is quite significant when its virtio devices use a large amount of virt-queues (e.g. a virtio-serial device with max_ports=511). Most of the time is spend in the creation of all the required event notifiers (ioeventfd and memory regions). This patch pack all the changes to the memory regions in a single memory transaction. Reported-by: Sitong Liu Reported-by: Xiaoling Gao Signed-off-by: Gal Hammer <ghammer@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org> Tested-by: Greg Kurz <groug@kaod.org>
2018-02-08virtio: remove event notifier cleanup call on de-assignGal Hammer
The virtio_bus_set_host_notifier function no longer calls event_notifier_cleanup when a event notifier is removed. The commit updates the code to match the new behavior and calls virtio_bus_cleanup_host_notifier after the notifier was de-assign and no longer in use. This change is a preparation to allow executing the virtio_bus_set_host_notifier function in a memory region transaction. Signed-off-by: Gal Hammer <ghammer@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org> Tested-by: Greg Kurz <groug@kaod.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-02-08Revert "vhost: add traces for memory listeners"Michael S. Tsirkin
This reverts commit 0750b060216de69ed1f14bc08181bf4ad27fc622. Follow up patches are reworking the memory listeners, the new mechanism will add its own set of traces. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-02-07memfd: add error argument, instead of perror()Marc-André Lureau
This will allow callers to silence error report when the call is allowed to failed. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20180201132757.23063-2-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-07memory: do explicit cleanup when remove listenersPeter Xu
When unregister memory listeners, we should call, e.g., region_del() (and possibly other undo operations) on every existing memory region sections there, otherwise we may leak resources that are held during the region_add(). This patch undo the stuff for the listeners, which emulates the case when the address space is set from current to an empty state. I found this problem when debugging a refcount leak issue that leads to a device unplug event lost (please see the "Bug:" line below). In that case, the leakage of resource is the PCI BAR memory region refcount. And since memory regions are not keeping their own refcount but onto their owners, so the vfio-pci device's (who is the owner of the PCI BAR memory regions) refcount is leaked, and event missing. We had encountered similar issues before and fixed in other way (ee4c112846, "vhost: Release memory references on cleanup"). This patch can be seen as a more high-level fix of similar problems that are caused by the resource leaks from memory listeners. So now we can remove the explicit unref of memory regions since that'll be done altogether during unregistering of listeners now. Bug: https://bugzilla.redhat.com/show_bug.cgi?id=1531393 Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20180122060244.29368-5-peterx@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-07vhost: add traces for memory listenersPeter Xu
Trace these operations on two memory listeners. It helps to verify the new memory listener fix, and good to keep them there. Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20180122060244.29368-2-peterx@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-05qdev: use device_class_set_parent_realize/unrealize/reset()Philippe Mathieu-Daudé
changes generated using the following Coccinelle patch: @@ type DeviceParentClass; DeviceParentClass *pc; DeviceClass *dc; identifier parent_fn; identifier child_fn; @@ ( +device_class_set_parent_realize(dc, child_fn, &pc->parent_fn); -pc->parent_fn = dc->realize; ... -dc->realize = child_fn; | +device_class_set_parent_unrealize(dc, child_fn, &pc->parent_fn); -pc->parent_fn = dc->unrealize; ... -dc->unrealize = child_fn; | +device_class_set_parent_reset(dc, child_fn, &pc->parent_fn); -pc->parent_fn = dc->reset; ... -dc->reset = child_fn; ) Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180114020412.26160-4-f4bug@amsat.org> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-01-24Revert "virtio: postpone the execution of event_notifier_cleanup function"Michael S. Tsirkin
This reverts commit 4fe6d78b2e241f41208dfb07605aace4becfc747 as it is reported to break cleanup and migration. Cc: Gal Hammer <ghammer@redhat.com> Cc: Sitong Liu <siliu@redhat.com> Cc: Xiaoling Gao <xiagao@redhat.com> Suggested-by: Greg Kurz <groug@kaod.org> Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Reported-by: Jose Ricardo Ziviani <joserz@linux.vnet.ibm.com> Reported-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
2018-01-24Revert "virtio: improve virtio devices initialization time"Michael S. Tsirkin
This reverts commit 6f0bb230722931d17fb284eee8efd40b9d653822. This reverts commit f87d72f5c5bff0837d409a56bd34f439a90119ca as that is reported to break cleanup and migration. Cc: Gal Hammer <ghammer@redhat.com> Cc: Sitong Liu <siliu@redhat.com> Cc: Xiaoling Gao <xiagao@redhat.com> Suggested-by: Greg Kurz <groug@kaod.org> Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Reported-by: Jose Ricardo Ziviani <joserz@linux.vnet.ibm.com> Reported-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
2018-01-18vhost: remove assertion to prevent crashJay Zhou
QEMU will assert on vhost-user backed virtio device hotplug if QEMU is using more RAM regions than VHOST_MEMORY_MAX_NREGIONS (for example if it were started with a lot of DIMM devices). Fix it by returning error instead of asserting and let callers of vhost_set_mem_table() handle error condition gracefully. Cc: qemu-stable@nongnu.org Signed-off-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Jay Zhou <jianjay.zhou@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-01-18vhost-user: fix misaligned access to payloadMichael S. Tsirkin
We currently take a pointer to a misaligned field of a packed structure. clang reports this as a build warning. A fix is to keep payload in a separate structure, and access is it from there using a vectored write. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-01-18vhost-user: factor out msg head and payloadMichael S. Tsirkin
split header and payload into separate structures, to enable easier handling of alignment issues. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-01-18virtio: improve virtio devices initialization timeGal Hammer
The loading time of a VM is quite significant when its virtio devices use a large amount of virt-queues (e.g. a virtio-serial device with max_ports=511). Most of the time is spend in the creation of all the required event notifiers (ioeventfd and memory regions). This patch pack all the changes to the memory regions in a single memory transaction. Reported-by: Sitong Liu <siliu@redhat.com> Reported-by: Xiaoling Gao <xiagao@redhat.com> Signed-off-by: Gal Hammer <ghammer@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-01-18virtio: postpone the execution of event_notifier_cleanup functionGal Hammer
Use the EventNotifier's cleanup callback function to execute the event_notifier_cleanup function after kvm unregistered the eventfd. This change supports running the virtio_bus_set_host_notifier function inside a memory region transaction. Otherwise, a closed fd is sent to kvm, which results in a failure. Signed-off-by: Gal Hammer <ghammer@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-01-18vhost-user-blk: introduce a new vhost-user-blk host deviceChangpeng Liu
This commit introduces a new vhost-user device for block, it uses a chardev to connect with the backend, same with Qemu virito-blk device, Guest OS still uses the virtio-blk frontend driver. To use it, start QEMU with command line like this: qemu-system-x86_64 \ -chardev socket,id=char0,path=/path/vhost.socket \ -device vhost-user-blk-pci,chardev=char0,num-queues=2, \ bootindex=2... \ Users can use different parameters for `num-queues` and `bootindex`. Different with exist Qemu virtio-blk host device, it makes more easy for users to implement their own I/O processing logic, such as all user space I/O stack against hardware block device. It uses the new vhost messages(VHOST_USER_GET_CONFIG) to get block virtio config information from backend process. Signed-off-by: Changpeng Liu <changpeng.liu@intel.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-01-18vhost-user: add new vhost user messages to support virtio config spaceChangpeng Liu
Add VHOST_USER_GET_CONFIG/VHOST_USER_SET_CONFIG messages which can be used for live migration of vhost user devices, also vhost user devices can benefit from the messages to get/set virtio config space from/to the I/O target. For the purpose to support virtio config space change, VHOST_USER_SLAVE_CONFIG_CHANGE_MSG message is added as the event notifier in case virtio config space change in the slave I/O target. Signed-off-by: Changpeng Liu <changpeng.liu@intel.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-01-11Merge remote-tracking branch 'origin/master' into HEADMichael S. Tsirkin
Resolve conflicts around apb. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-12-22virtio-pci: Don't force Subsystem Vendor ID = Vendor IDLadi Prosek
The statement being removed doesn't change anything as virtio PCI devices already have Subsystem Vendor ID set to pci_default_sub_vendor_id (0x1af4), same as Vendor ID. And the Virtio spec does not require the two to be equal, either: "The PCI Subsystem Vendor ID and the PCI Subsystem Device ID MAY reflect the PCI Vendor and Device ID of the environment (for informational purposes by the driver)." Background: Following the recent virtio-win licensing change, several vendors are planning to ship their own certified version of Windows guest Virtio drivers, potentially taking advantage of Windows Update as a distribution channel. It is therefore critical that each vendor uses their own PCI Subsystem Vendor ID for Virtio devices to prevent drivers from other vendors binding to it. This would be trivially done by adding: k->subsystem_vendor_id = ... to virtio_pci_class_init(). Except for the problematic statement deleted by this patch, which reverts the Subsystem Vendor ID back to 0x1af4 for legacy devices for no good reason. Signed-off-by: Ladi Prosek <lprosek@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
2017-12-19virtio_error: don't invoke status callbacksMichael S. Tsirkin
Backends don't need to know what frontend requested a reset, and notifying then from virtio_error is messy because virtio_error itself might be invoked from backend. Let's just set the status directly. Cc: qemu-stable@nongnu.org Reported-by: Ilya Maximets <i.maximets@samsung.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-12-18hw/virtio-balloon: remove old i386 dependencyPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-12-18hw: use "qemu/osdep.h" as first #include in source filesPhilippe Mathieu-Daudé
applied using ./scripts/clean-includes Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-12-05pci: Eliminate redundant PCIDevice::bus pointerDavid Gibson
The bus pointer in PCIDevice is basically redundant with QOM information. It's always initialized to the qdev_get_parent_bus(), the only difference is the type. Therefore this patch eliminates the field, instead creating a pci_get_bus() helper to do the type mangling to derive it conveniently from the QOM Device object underneath. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com>
2017-12-01virtio: check VirtQueue Vring object is setPrasad J Pandit
A guest could attempt to use an uninitialised VirtQueue object or unset Vring.align leading to a arithmetic exception. Add check to avoid it. Reported-by: Zhangboxian <zhangboxian@huawei.com> Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com>
2017-12-01vhost: fix error check in vhost_verify_ring_mappings()Greg Kurz
Since commit f1f9e6c5 "vhost: adapt vhost_verify_ring_mappings() to virtio 1 ring layout", we check the mapping of each part (descriptor table, available ring and used ring) of each virtqueue separately. The checking of a part is done by the vhost_verify_ring_part_mapping() function: it returns either 0 on success or a negative errno if the part cannot be mapped at the same place. Unfortunately, the vhost_verify_ring_mappings() function checks its return value the other way round. It means that we either: - only verify the descriptor table of the first virtqueue, and if it is valid we ignore all the other mappings - or ignore all broken mappings until we reach a valid one ie, we only raise an error if all mappings are broken, and we consider all mappings are valid otherwise (false success), which is obviously wrong. This patch ensures that vhost_verify_ring_mappings() only returns success if ALL mappings are okay. Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-12-01vhost: restore avail index from vring used index on disconnectionMaxime Coquelin
vhost_virtqueue_stop() gets avail index value from the backend, except if the backend is not responding. It happens when the backend crashes, and in this case, internal state of the virtio queue is inconsistent, making packets to corrupt the vring state. With a Linux guest, it results in following error message on backend reconnection: [ 22.444905] virtio_net virtio0: output.0:id 0 is not a head! [ 22.446746] net enp0s3: Unexpected TXQ (0) queue failure: -5 [ 22.476360] net enp0s3: Unexpected TXQ (0) queue failure: -5 Fixes: 283e2c2adcb8 ("net: virtio-net discards TX data after link down") Cc: qemu-stable@nongnu.org Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-12-01virtio: Add queue interface to restore avail index from vring used indexMaxime Coquelin
In case of backend crash, it is not possible to restore internal avail index from the backend value as vhost_get_vring_base callback fails. This patch provides a new interface to restore internal avail index from the vring used index, as done by some vhost-user backend on reconnection. Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-11-16fix: unrealize virtio device if we fail to hotplug itlinzhecheng
If we fail to hotplug virtio-blk device and then suspend or shutdown VM, qemu is likely to crash. Re-production steps: 1. Run VM named vm001 2. Create a virtio-blk.xml which contains wrong configurations: <disk device="lun" rawio="yes" type="block"> <driver cache="none" io="native" name="qemu" type="raw" /> <source dev="/dev/mapper/11-dm" /> <target bus="virtio" dev="vdx" /> </disk> 3. Run command : virsh attach-device vm001 virtio-blk.xml error: Failed to attach device from blk-scsi.xml error: internal error: unable to execute QEMU command 'device_add': Please set scsi=off for virtio-blk devices in order to use virtio 1.0 it means hotplug virtio-blk device failed. 4. Suspend or shutdown VM will leads to qemu crash Problem happens in virtio_vmstate_change which is called by vm_state_notify: vdev’s parent_bus is NULL, so qdev_get_parent_bus(DEVICE(vdev)) will crash. virtio_vmstate_change is added to the list vm_change_state_head at virtio_blk_device_realize(virtio_init), but after hotplug virtio-blk failed, virtio_vmstate_change will not be removed from vm_change_state_head. Adding unrealize function of virtio-blk device can solve this problem. Signed-off-by: linzhecheng <linzhecheng@huawei.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-10-15virtio-pci: Replace modern_as with direct access to modern_barAlexey Kardashevskiy
The modern bar is accessed now via yet another address space created just for that purpose and it does not really need FlatView and dispatch tree as it has a single memory region so it is just a waste of memory. Things get even worse when there are dozens or hundreds of virtio-pci devices - since these address spaces are global, changing any of them triggers rebuilding all address spaces. This replaces indirect accesses to the modern BAR with a simple lookup and direct calls to memory_region_dispatch_read/write. This is expected to save lots of memory at boot time after applying: [Qemu-devel] [PULL 00/32] Misc changes for 2017-09-22 Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-10-15virtio: fix descriptor counting in virtqueue_popWolfgang Bumiller
While changing the s/g list allocation, commit 3b3b0628 also changed the descriptor counting to count iovec entries as split by cpu_physical_memory_map(). Previously only the actual descriptor entries were counted and the split into the iovec happened afterwards in virtqueue_map(). Count the entries again instead to avoid erroneous "Looped descriptor" errors. Reported-by: Hans Middelhoek <h.middelhoek@ospito.nl> Link: https://forum.proxmox.com/threads/vm-crash-with-memory-hotplug.35904/ Fixes: 3b3b0628217e ("virtio: slim down allocation of VirtQueueElements") Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-10-15pci: Add interface names to hybrid PCI devicesEduardo Habkost
The following devices support both PCI Express and Conventional PCI, by including special code to handle the QEMU_PCI_CAP_EXPRESS flag and/or conditional pcie_endpoint_cap_init() calls: * vfio-pci (is_express=1, but legacy PCI handled by vfio_populate_device()) * vmxnet3 (is_express=0, but PCIe handled by vmxnet3_realize()) * pvscsi (is_express=0, but PCIe handled by pvscsi_realize()) * virtio-pci (is_express=0, but PCIe handled by virtio_pci_dc_realize(), and additional legacy PCI code at virtio_pci_realize()) * base-xhci (is_express=1, but pcie_endpoint_cap_init() call is conditional on pci_bus_is_express(dev->bus) * Note that xhci does not clear QEMU_PCI_CAP_EXPRESS like the other hybrid devices Cc: Dmitry Fleytman <dmitry@daynix.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-10-15virtio/pci/migration: Convert to VMStateDr. David Alan Gilbert
Convert the 'modern_state' part of virtio-pci to modern migration macros. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-12 18:41:22 +0000