aboutsummaryrefslogtreecommitdiff
path: root/hw/virtio
AgeCommit message (Collapse)Author
2020-11-03hw/virtio/vhost-backend: Fix Coverity CID 1432871Philippe Mathieu-Daudé
Fix uninitialized value issues reported by Coverity: Field 'msg.reserved' is uninitialized when calling write(). While the 'struct vhost_msg' does not have a 'reserved' field, we still initialize it to have the two parts of the function consistent. Reported-by: Coverity (CID 1432864: UNINIT) Fixes: c471ad0e9bd ("vhost_net: device IOTLB support") Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20201103063541.2463363-1-philmd@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-11-03virito-mem: Implement get_min_alignment()David Hildenbrand
The block size determines the alignment requirements. Implement get_min_alignment() of the TYPE_MEMORY_DEVICE interface. This allows auto-assignment of a properly aligned address in guest physical address space. For example, when specifying a 2GB block size for a virtio-mem device with 10GB with a memory setup "-m 4G, 20G", we'll no longer fail when realizing. Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Wei Yang <richardw.yang@linux.intel.com> Cc: Dr. David Alan Gilbert <dgilbert@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20201008083029.9504-7-david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-11-03virtio-mem: Probe THP size to determine default block sizeDavid Hildenbrand
Let's allow a minimum block size of 1 MiB in all configurations. Select the default block size based on - The page size of the memory backend. - The THP size if the memory backend size corresponds to the real host page size. - The global minimum of 1 MiB. and warn if something smaller is configured by the user. VIRTIO_MEM only supports Linux (depends on LINUX), so we can probe the THP size unconditionally. For now we only support virtio-mem on x86-64 - there isn't a user-visible change (x86-64 only supports 2 MiB THP on the PMD level) - the default was, and will be 2 MiB. If we ever have THP on the PUD level (e.g., 1 GiB THP on x86-64), we expect it to be more transparent - e.g., to only optimize fully populated ranges unless explicitly told /configured otherwise (in contrast to PMD THP). Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Wei Yang <richardw.yang@linux.intel.com> Cc: Dr. David Alan Gilbert <dgilbert@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20201008083029.9504-4-david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-11-03virtio-mem: Make sure "usable_region_size" is always multiples of the block sizeDavid Hildenbrand
The spec states: "The device MUST set addr, region_size, usable_region_size, plugged_size, requested_size to multiples of block_size." With block sizes > 256MB, we currently wouldn't guarantee that for the usable_region_size. Note that we cannot exceed the region_size, as we already enforce the alignment there properly. Fixes: 910b25766b33 ("virtio-mem: Paravirtualized memory hot(un)plug") Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Wei Yang <richardw.yang@linux.intel.com> Cc: Dr. David Alan Gilbert <dgilbert@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20201008083029.9504-3-david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-11-03virtio-mem: Make sure "addr" is always multiples of the block sizeDavid Hildenbrand
The spec states: "The device MUST set addr, region_size, usable_region_size, plugged_size, requested_size to multiples of block_size." In some cases, we currently don't guarantee that for "addr": For example, when starting a VM with 4 GiB boot memory and a virtio-mem device with a block size of 2 GiB, "memaddr"/"addr" will be auto-assigned to 0x140000000 (5 GiB). We'll try to improve auto-assignment for memory devices next, to avoid bailing out in case memory device code selects a bad address. Note: The Linux driver doesn't support such big block sizes yet. Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com> Fixes: 910b25766b33 ("virtio-mem: Paravirtualized memory hot(un)plug") Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Wei Yang <richardw.yang@linux.intel.com> Cc: Dr. David Alan Gilbert <dgilbert@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20201008083029.9504-2-david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-10-30virtio: skip guest index check on device loadFelipe Franciosi
QEMU must be careful when loading device state off migration streams to prevent a malicious source from exploiting the emulator. Overdoing these checks has the side effect of allowing a guest to "pin itself" in cloud environments by messing with state which is entirely in its control. Similarly to what f3081539 achieved in usb_device_post_load(), this commit removes such a check from virtio_load(). Worth noting, the result of a load without this check is the same as if a guest enables a VQ with invalid indexes to begin with. That is, the virtual device is set in a broken state (by the datapath handler) and must be reset. Signed-off-by: Felipe Franciosi <felipe@nutanix.com> Message-Id: <20201028134643.110698-1-felipe@nutanix.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-10-30vhost-blk: set features before setting inflight featureJin Yu
Virtqueue has split and packed, so before setting inflight, you need to inform the back-end virtqueue format. Signed-off-by: Jin Yu <jin.yu@intel.com> Message-Id: <20200910134851.7817-1-jin.yu@intel.com> Acked-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-10-30vhost: Don't special case vq->used_phys in vhost_get_log_size()Greg Kurz
The first loop in vhost_get_log_size() computes the size of the dirty log bitmap so that it allows to track changes in the entire guest memory, in terms of GPA. When not using a vIOMMU, the address of the vring's used structure, vq->used_phys, is a GPA. It is thus already covered by the first loop. When using a vIOMMU, vq->used_phys is a GIOVA that will be translated to an HVA when the vhost backend needs to update the used structure. It will log the corresponding GPAs into the bitmap but it certainly won't log the GIOVA. So in any case, vq->used_phys shouldn't be explicitly used to size the bitmap. Drop the second loop. This fixes a crash of the source when migrating a guest using in-kernel vhost-net and iommu_platform=on on POWER, because DMA regions are put over 0x800000000000000ULL. The resulting insanely huge log size causes g_malloc0() to abort. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1879349 Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <160208823418.29027.15172801181796272300.stgit@bahia.lan> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-10-30hw/virtio/vhost-vdpa: Fix Coverity CID 1432864Philippe Mathieu-Daudé
Fix uninitialized value issues reported by Coverity: Field 'msg.reserved' is uninitialized when calling write(). Fixes: a5bd05800f8 ("vhost-vdpa: batch updating IOTLB mappings") Reported-by: Coverity (CID 1432864: UNINIT) Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20201028154004.776760-1-philmd@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-10-30vhost-vsock: set vhostfd to non-blocking modeStefano Garzarella
vhost IOTLB API uses read()/write() to exchange iotlb messages with the kernel module. The QEMU implementation expects a non-blocking fd, indeed commit c471ad0e9b ("vhost_net: device IOTLB support") set it for vhost-net. Without this patch, if we enable iommu for the vhost-vsock device, QEMU can hang when exchanging IOTLB messages. As commit 894022e616 ("net: check if the file descriptor is valid before using it") did for tap, let's use qemu_try_set_nonblock() when fd is provided by the user. Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Message-Id: <20201029144849.70958-1-sgarzare@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-10-09Merge remote-tracking branch 'remotes/armbru/tags/pull-error-2020-10-09' ↵Peter Maydell
into staging Error reporting patches for 2020-10-09 # gpg: Signature made Fri 09 Oct 2020 07:45:17 BST # gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653 # gpg: issuer "armbru@redhat.com" # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full] # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full] # Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653 * remotes/armbru/tags/pull-error-2020-10-09: error: Use error_fatal to simplify obvious fatal errors (again) error: Remove NULL checks on error_propagate() calls (again) Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-09error: Use error_fatal to simplify obvious fatal errors (again)Markus Armbruster
Patch created mechanically by rerunning: $ spatch --in-place --sp-file scripts/coccinelle/use-error_fatal.cocci \ --macro-file scripts/cocci-macro-file.h --use-gitgrep . Variables now unused dropped manually. Cc: Eric Auger <eric.auger@redhat.com> Cc: David Hildenbrand <david@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200722084048.1726105-5-armbru@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com>
2020-10-09monitor: Use getter/setter functions for cur_monKevin Wolf
cur_mon really needs to be coroutine-local as soon as we move monitor command handlers to coroutines and let them yield. As a first step, just remove all direct accesses to cur_mon so that we can implement this in the getter function later. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20201005155855.256490-4-kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29qapi: Restrict device memory commands to machine codePhilippe Mathieu-Daudé
Only qemu-system-FOO and qemu-storage-daemon provide QMP monitors, therefore such declarations and definitions are irrelevant for user-mode emulation. Restricting the memory commands to machine.json pulls less QAPI-generated code into user-mode. Acked-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200913195348.1064154-7-philmd@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29qapi: Restrict balloon-related commands to machine codePhilippe Mathieu-Daudé
Only qemu-system-FOO and qemu-storage-daemon provide QMP monitors, therefore such declarations and definitions are irrelevant for user-mode emulation. Restricting the balloon-related commands to machine.json pulls less QAPI-generated code into user-mode. Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Markus Armbruster <armbru@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200913195348.1064154-4-philmd@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29hw: virtio-pmem: detach the element fromt the virtqueue when error occursLi Qiang
If error occurs while processing the virtio request we should call 'virtqueue_detach_element' to detach the element from the virtqueue before free the elem. Signed-off-by: Li Qiang <liq3ea@163.com> Message-Id: <20200813165125.59928-1-liq3ea@163.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Fixes: 5f503cd9f3 ("virtio-pmem: add virtio device") Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
2020-09-29virtio: update MemoryRegionCaches when guest set bad featuresLi Qiang
Current the 'virtio_set_features' only update the 'MemorRegionCaches' when the 'virtio_set_features_nocheck' return '0' which means it is not bad features. However the guest can still trigger the access of the used vring after set bad features. In this situation it will cause assert failure in 'ADDRESS_SPACE_ST_CACHED'. Buglink: https://bugs.launchpad.net/qemu/+bug/1890333 Fixes: db812c4073c7 ("virtio: update MemoryRegionCaches when guest negotiates features") Reported-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Li Qiang <liq3ea@163.com> Message-Id: <20200919082706.6703-1-liq3ea@163.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-09-29vhost-user-vsock-pci: force virtio version 1Stefano Garzarella
Commit 9b3a35ec82 ("virtio: verify that legacy support is not accidentally on") added a safety check that requires to set 'disable-legacy=on' on vhost-user-vsock-pci device: $ ./qemu-system-x86_64 ... \ -chardev socket,id=char0,reconnect=0,path=/tmp/vhost4.socket \ -device vhost-user-vsock-pci,chardev=char0 qemu-system-x86_64: -device vhost-user-vsock-pci,chardev=char0: device is modern-only, use disable-legacy=on virtio-vsock was introduced after the release of VIRTIO 1.0 specifications, so it should be 'modern-only'. This patch forces virtio version 1 and removes the 'transitional_name' property, as done for vhost-vsock-pci, removing the need to specify 'disable-legacy=on' on vhost-user-vsock-pci device. Cc: qemu-stable@nongnu.org Suggested-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Message-Id: <20200921122506.82515-4-sgarzare@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-09-29vhost-vsock-pci: force virtio version 1Stefano Garzarella
Commit 9b3a35ec82 ("virtio: verify that legacy support is not accidentally on") added a safety check that requires to set 'disable-legacy=on' on vhost-vsock-pci device: $ ./qemu-system-x86_64 ... -device vhost-vsock-pci,guest-cid=5 qemu-system-x86_64: -device vhost-vsock-pci,guest-cid=5: device is modern-only, use disable-legacy=on virtio-vsock was introduced after the release of VIRTIO 1.0 specifications, so it should be 'modern-only'. In addition Cornelia verified that forcing a legacy mode on vhost-vsock-pci device using x86-64 host and s390x guest, so with different endianness, produces strange behaviours. This patch forces virtio version 1 and removes the 'transitional_name' property removing the need to specify 'disable-legacy=on' on vhost-vsock-pci device. To avoid migration issues, we force virtio version 1 only when legacy check is enabled in the new machine types (>= 5.1). As the transitional device name is not commonly used, we do not provide compatibility handling for it. Cc: qemu-stable@nongnu.org Reported-by: Qian Cai <caiqian@redhat.com> Reported-by: Qinghua Cheng <qcheng@redhat.com> Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1868449 Suggested-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Message-Id: <20200921122506.82515-3-sgarzare@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-09-29virtio: skip legacy support check on machine types less than 5.1Stefano Garzarella
Commit 9b3a35ec82 ("virtio: verify that legacy support is not accidentally on") added a check that returns an error if legacy support is on, but the device does not support legacy. Unfortunately some devices were wrongly declared legacy capable even if they were not (e.g vhost-vsock). To avoid migration issues, we add a virtio-device property (x-disable-legacy-check) to skip the legacy error, printing a warning instead, for machine types < 5.1. Cc: qemu-stable@nongnu.org Fixes: 9b3a35ec82 ("virtio: verify that legacy support is not accidentally on") Suggested-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Suggested-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Message-Id: <20200921122506.82515-2-sgarzare@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-09-29vhost-vdpa: add trace-eventsLaurent Vivier
Add trace functions in vhost-vdpa.c. All traces from this file can be enabled with '-trace vhost_vdpa*'. Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Laurent Vivier <lvivier@redhat.com> Message-Id: <20200925091055.186023-3-lvivier@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-09-29virtio-pmem-pci: force virtio version 1Pankaj Gupta
Qemu fails with below error when trying to run with virtio pmem: (qemu) qemu-system-x86_64: -device virtio-pmem-pci,memdev=mem1,id=nv1: device is modern-only, use disable-legacy=on This patch fixes this by forcing virtio 1 with virtio-pmem. fixes: adf0748a49 ("virtio-pci: Proxy for virtio-pmem") Signed-off-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com> Message-Id: <20200925102251.7216-1-pankaj.gupta.linux@gmail.com> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-09-29virtio-iommu-pci: force virtio version 1Eric Auger
Commit 9b3a35ec82 ("virtio: verify that legacy support is not accidentally on") added a safety check that requires to set 'disable-legacy=on' on virtio-iommu-pci: qemu-system-aarch64: -device virtio-iommu-pci: device is modern-only, use disable-legacy=on virtio-iommu was introduced after the release of VIRTIO 1.0 specifications, so it should be 'modern-only'. This patch forces virtio version 1 and removes the 'transitional_name' property removing the need to specify 'disable-legacy=on' on virtio-iommu-pci device. Cc: qemu-stable@nongnu.org Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20200908193309.20569-3-eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-09-29virtio-iommu: Check gtrees are non null before destroying themEric Auger
If realize fails, domains and endpoints trees may be NULL. On unrealize(), this produces assertions: "GLib: g_tree_destroy: assertion 'tree != NULL' failed" Check that the trees are non NULL before destroying them. Cc: qemu-stable@nongnu.org Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20200908193309.20569-2-eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-09-29vhost: check queue state in the vhost_dev_set_log routineDima Stepanov
If the vhost-user-blk daemon provides only one virtqueue, but device was added with several queues, then QEMU will send more VHOST-USER command than expected by daemon side. The vhost_virtqueue_start() routine handles such case by checking the return value from the virtio_queue_get_desc_addr() function call. Add the same check to the vhost_dev_set_log() routine. Signed-off-by: Dima Stepanov <dimastep@yandex-team.ru> Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Message-Id: <6232946d5af09e9775076645909964a6539b8ab5.1599813294.git.dimastep@yandex-team.ru> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-09-29vhost: recheck dev state in the vhost_migration_log routineDima Stepanov
vhost-user devices can get a disconnect in the middle of the VHOST-USER handshake on the migration start. If disconnect event happened right before sending next VHOST-USER command, then the vhost_dev_set_log() call in the vhost_migration_log() function will return error. This error will lead to the assert() and close the QEMU migration source process. For the vhost-user devices the disconnect event should not break the migration process, because: - the device will be in the stopped state, so it will not be changed during migration - if reconnect will be made the migration log will be reinitialized as part of reconnect/init process: #0 vhost_log_global_start (listener=0x563989cf7be0) at hw/virtio/vhost.c:920 #1 0x000056398603d8bc in listener_add_address_space (listener=0x563989cf7be0, as=0x563986ea4340 <address_space_memory>) at softmmu/memory.c:2664 #2 0x000056398603dd30 in memory_listener_register (listener=0x563989cf7be0, as=0x563986ea4340 <address_space_memory>) at softmmu/memory.c:2740 #3 0x0000563985fd6956 in vhost_dev_init (hdev=0x563989cf7bd8, opaque=0x563989cf7e30, backend_type=VHOST_BACKEND_TYPE_USER, busyloop_timeout=0) at hw/virtio/vhost.c:1385 #4 0x0000563985f7d0b8 in vhost_user_blk_connect (dev=0x563989cf7990) at hw/block/vhost-user-blk.c:315 #5 0x0000563985f7d3f6 in vhost_user_blk_event (opaque=0x563989cf7990, event=CHR_EVENT_OPENED) at hw/block/vhost-user-blk.c:379 Update the vhost-user-blk device with the internal started_vu field which will be used for initialization (vhost_user_blk_start) and clean up (vhost_user_blk_stop). This additional flag in the VhostUserBlk structure will be used to track whether the device really needs to be stopped and cleaned up on a vhost-user level. The disconnect event will set the overall VHOST device (not vhost-user) to the stopped state, so it can be used by the general vhost_migration_log routine. Such approach could be propogated to the other vhost-user devices, but better idea is just to make the same connect/disconnect code for all the vhost-user devices. This migration issue was slightly discussed earlier: - https://lists.gnu.org/archive/html/qemu-devel/2020-05/msg01509.html - https://lists.gnu.org/archive/html/qemu-devel/2020-05/msg05241.html Signed-off-by: Dima Stepanov <dimastep@yandex-team.ru> Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Message-Id: <9fbfba06791a87813fcee3e2315f0b904cc6789a.1599813294.git.dimastep@yandex-team.ru> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-09-29virtio-mem: detach the element from the virtqueue when error occursLi Qiang
If error occurs while processing the virtio request we should call 'virtqueue_detach_element' to detach the element from the virtqueue before free the elem. Signed-off-by: Li Qiang <liq3ea@163.com> Message-Id: <20200816142245.17556-1-liq3ea@163.com> Fixes: 910b25766b ("virtio-mem: Paravirtualized memory hot(un)plug") Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-09-29vhost-vdpa: batch updating IOTLB mappingsJason Wang
To speed up the memory mapping updating between vhost-vDPA and vDPA device driver, this patch passes the IOTLB batching flags via IOTLB API. Two new flags was introduced, VHOST_IOTLB_BATCH_BEGIN is a hint that a bathced IOTLB updating may be initiated from the userspace. VHOST_IOTLB_BATCH_END is a hint that userspace has finished the updating: VHOST_IOTLB_BATCH_BEGIN VHOST_IOTLB_UPDATE/VHOST_IOTLB_INVALIDATE ... VHOST_IOTLB_BATCH_END Vhost-vDPA can then know that all mappings has been set and can do optimization like passing all the mappings to the vDPA device driver. Signed-off-by: Jason Wang <jasowang@redhat.com> Message-Id: <20200907104903.31551-4-jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-09-29vhost: switch to use IOTLB v2 formatJason Wang
This patch tries to switch to use new kernel IOTLB format V2. Previous version may have inconsistent ABI between 32bit and 64bit machines because of the hole after type field. Refer kernel commit ("429711aec282 vhost: switch to use new message format") for more information. To enable this feature, qemu need to use a new ioctl VHOST_SET_BACKEND_FEATURE with VHOST_BACKEND_F_IOTLB_MSG_V2 bit. A new vhost setting backend features ops was introduced. And when we try to set features for vhost dev, we will examine the support of new IOTLB format and enable it. This process is total transparent to guest, which means we can have different IOTLB message type in src and dst during migration. The conversion of IOTLB message is straightforward, just check the type and behave accordingly. Signed-off-by: Jason Wang <jasowang@redhat.com> Message-Id: <20200907104903.31551-3-jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-09-28Merge remote-tracking branch ↵Peter Maydell
'remotes/vivier2/tags/trivial-branch-for-5.2-pull-request' into staging Trivial Patches Pull request 20200928 # gpg: Signature made Mon 28 Sep 2020 10:15:00 BST # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/trivial-branch-for-5.2-pull-request: docs/system/deprecated: Move lm32 and unicore32 to the right section migration/multifd: Remove superfluous semicolons timer: Fix timer_mod_anticipate() documentation vhost-vdpa: remove useless variable Add *.pyc back to the .gitignore file virtio: vdpa: omit check return of g_malloc meson: fix static flag summary vhost-vdpa: fix indentation in vdpa_ops Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-23vhost-vdpa: remove useless variableLaurent Vivier
in vhost_vdpa_listener_region_del(), try_unmap is always true and so, vhost_vdpa_dma_unmap() is always called. We can remove the variable Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Li Qiang <liq3ea@gmail.com> Message-Id: <20200920152024.860172-1-lvivier@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-09-23virtio: vdpa: omit check return of g_mallocLi Qiang
If g_malloc fails, the application will be terminated. No need to check the return value of g_malloc. Signed-off-by: Li Qiang <liq3ea@163.com> Reviewed-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20200819144309.67579-1-liq3ea@163.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-09-23vhost-vdpa: fix indentation in vdpa_opsStefano Garzarella
This patch fixes wrong indentation of some vdpa_ops fields introduced with the initial commit 108a64818e ("vhost-vdpa: introduce vhost-vdpa backend") Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Li Qiang <liq3ea@gmail.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200916152634.56917-1-sgarzare@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-09-23qemu/atomic.h: rename atomic_ to qatomic_Stefan Hajnoczi
clang's C11 atomic_fetch_*() functions only take a C11 atomic type pointer argument. QEMU uses direct types (int, etc) and this causes a compiler error when a QEMU code calls these functions in a source file that also included <stdatomic.h> via a system header file: $ CC=clang CXX=clang++ ./configure ... && make ../util/async.c:79:17: error: address argument to atomic operation must be a pointer to _Atomic type ('unsigned int *' invalid) Avoid using atomic_*() names in QEMU's atomic.h since that namespace is used by <stdatomic.h>. Prefix QEMU's APIs with 'q' so that atomic.h and <stdatomic.h> can co-exist. I checked /usr/include on my machine and searched GitHub for existing "qatomic_" users but there seem to be none. This patch was generated using: $ git grep -h -o '\<atomic\(64\)\?_[a-z0-9_]\+' include/qemu/atomic.h | \ sort -u >/tmp/changed_identifiers $ for identifier in $(</tmp/changed_identifiers); do sed -i "s%\<$identifier\>%q$identifier%g" \ $(git grep -I -l "\<$identifier\>") done I manually fixed line-wrap issues and misaligned rST tables. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200923105646.47864-1-stefanha@redhat.com>
2020-09-23virtio-crypto: don't modify elem->in/out_sgStefan Hajnoczi
A number of iov_discard_front/back() operations are made by virtio-crypto. The elem->in/out_sg iovec arrays are modified by these operations, resulting virtqueue_unmap_sg() calls on different addresses than were originally mapped. This is problematic because dirty memory may not be logged correctly, MemoryRegion refcounts may be leaked, and the non-RAM bounce buffer can be leaked. Take a copy of the elem->in/out_sg arrays so that the originals are preserved. The iov_discard_undo() API could be used instead (with better performance) but requires careful auditing of the code, so do the simple thing instead. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Li Qiang <liq3ea@gmail.com> Message-Id: <20200917094455.822379-4-stefanha@redhat.com>
2020-09-18Use OBJECT_DECLARE_SIMPLE_TYPE when possibleEduardo Habkost
This converts existing DECLARE_INSTANCE_CHECKER usage to OBJECT_DECLARE_SIMPLE_TYPE when possible. $ ./scripts/codeconverter/converter.py -i \ --pattern=AddObjectDeclareSimpleType $(git grep -l '' -- '*.[ch]') Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Acked-by: Paul Durrant <paul@xen.org> Message-Id: <20200916182519.415636-6-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-18Use OBJECT_DECLARE_TYPE when possibleEduardo Habkost
This converts existing DECLARE_OBJ_CHECKERS usage to OBJECT_DECLARE_TYPE when possible. $ ./scripts/codeconverter/converter.py -i \ --pattern=AddObjectDeclareType $(git grep -l '' -- '*.[ch]') Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Acked-by: Paul Durrant <paul@xen.org> Message-Id: <20200916182519.415636-5-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-11Merge remote-tracking branch ↵Peter Maydell
'remotes/ehabkost/tags/machine-next-pull-request' into staging QOM boilerplate cleanup Documentation build fix: * memory: Remove kernel-doc comment marker (Eduardo Habkost) QOM cleanups: * Rename QOM macros for consistency between TYPE_* and type checking constants (Eduardo Habkost) QOM new macros: * OBJECT_DECLARE_* and OBJECT_DEFINE_* macros (Daniel P. Berrangé) * DECLARE_*_CHECKER macros (Eduardo Habkost) Automated QOM boilerplate changes: * Automated changes to use DECLARE_*_CHECKER (Eduardo Habkost * Automated changes to use OBJECT_DECLARE* (Eduardo Habkost) # gpg: Signature made Thu 10 Sep 2020 19:17:49 BST # gpg: using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6 # gpg: issuer "ehabkost@redhat.com" # gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full] # Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6 * remotes/ehabkost/tags/machine-next-pull-request: (33 commits) virtio-vga: Use typedef name for instance_size vhost-user-vga: Use typedef name for instance_size xilinx_axienet: Use typedef name for instance_size lpc_ich9: Use typedef name for instance_size omap_intc: Use typedef name for instance_size xilinx_axidma: Use typedef name for instance_size tusb6010: Rename TUSB to TUSB6010 pc87312: Rename TYPE_PC87312_SUPERIO to TYPE_PC87312 vfio: Rename PCI_VFIO to VFIO_PCI usb: Rename USB_SERIAL_DEV to USB_SERIAL sabre: Rename SABRE_DEVICE to SABRE rs6000_mc: Rename RS6000MC_DEVICE to RS6000MC filter-rewriter: Rename FILTER_COLO_REWRITER to FILTER_REWRITER esp: Rename ESP_STATE to ESP ahci: Rename ICH_AHCI to ICH9_AHCI vmgenid: Rename VMGENID_DEVICE to TYPE_VMGENID vfio: Rename VFIO_AP_DEVICE_TYPE to TYPE_VFIO_AP_DEVICE dev-smartcard-reader: Rename CCID_DEV_NAME to TYPE_USB_CCID_DEV ap-device: Rename AP_DEVICE_TYPE to TYPE_AP_DEVICE gpex: Fix type checking function name ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-09-09trace-events: Fix attribution of trace points to sourceMarkus Armbruster
Some trace points are attributed to the wrong source file. Happens when we neglect to update trace-events for code motion, or add events in the wrong place, or misspell the file name. Clean up with help of scripts/cleanup-trace-events.pl. Funnies requiring manual post-processing: * accel/tcg/cputlb.c trace points are in trace-events. * block.c and blockdev.c trace points are in block/trace-events. * hw/block/nvme.c uses the preprocessor to hide its trace point use from cleanup-trace-events.pl. * hw/tpm/tpm_spapr.c uses pseudo trace point tpm_spapr_show_buffer to guard debug code. * include/hw/xen/xen_common.h trace points are in hw/xen/trace-events. * linux-user/trace-events abbreviates a tedious list of filenames to */signal.c. * net/colo-compare and net/filter-rewriter.c use pseudo trace points colo_compare_miscompare and colo_filter_rewriter_debug to guard debug code. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200806141334.3646302-5-armbru@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2020-09-09Use DECLARE_*CHECKER* macrosEduardo Habkost
Generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=TypeCheckMacro $(git grep -l '' -- '*.[ch]') Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-12-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-13-ehabkost@redhat.com> Message-Id: <20200831210740.126168-14-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-09Move QOM typedefs and add missing includesEduardo Habkost
Some typedefs and macros are defined after the type check macros. This makes it difficult to automatically replace their definitions with OBJECT_DECLARE_TYPE. Patch generated using: $ ./scripts/codeconverter/converter.py -i \ --pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]') which will split "typdef struct { ... } TypedefName" declarations. Followed by: $ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \ $(git grep -l '' -- '*.[ch]') which will: - move the typedefs and #defines above the type check macros - add missing #include "qom/object.h" lines if necessary Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-9-ehabkost@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Message-Id: <20200831210740.126168-10-ehabkost@redhat.com> Message-Id: <20200831210740.126168-11-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-09-02virtio: add Virtio*BusClass sizesCornelia Huck
Both VirtioPCIBusClass and VirtioCcwBusClass are typedefs of VirtioBusClass, but set .class_size in the TypeInfo anyway to be safe if that changes in the future. Reported-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Message-Id: <20200824122051.99432-1-cohuck@redhat.com>
2020-09-01hw/virtio/vhost-user:Remove dead assignment in scrub_shadow_regions()Chen Qun
Clang static code analyzer show warning: hw/virtio/vhost-user.c:606:9: warning: Value stored to 'mr' is never read mr = vhost_user_get_mr_data(reg->userspace_addr, &offset, &fd); ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com> Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20200827110311.164316-6-kuhn.chenqun@huawei.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-08-27vhost-user-blk-pci: default num_queues to -smp NStefan Hajnoczi
Automatically size the number of request virtqueues to match the number of vCPUs. This ensures that completion interrupts are handled on the same vCPU that submitted the request. No IPI is necessary to complete an I/O request and performance is improved. The maximum number of MSI-X vectors and virtqueues limit are respected. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Message-Id: <20200818143348.310613-8-stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-08-27virtio-blk-pci: default num_queues to -smp NStefan Hajnoczi
Automatically size the number of virtio-blk-pci request virtqueues to match the number of vCPUs. Other transports continue to default to 1 request virtqueue. A 1:1 virtqueue:vCPU mapping ensures that completion interrupts are handled on the same vCPU that submitted the request. No IPI is necessary to complete an I/O request and performance is improved. The maximum number of MSI-X vectors and virtqueues limit are respected. Performance improves from 78k to 104k IOPS on a 32 vCPU guest with 101 virtio-blk-pci devices (ioengine=libaio, iodepth=1, bs=4k, rw=randread with NVMe storage). Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com> Message-Id: <20200818143348.310613-7-stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-08-27virtio-scsi-pci: default num_queues to -smp NStefan Hajnoczi
Automatically size the number of virtio-scsi-pci, vhost-scsi-pci, and vhost-user-scsi-pci request virtqueues to match the number of vCPUs. Other transports continue to default to 1 request virtqueue. A 1:1 virtqueue:vCPU mapping ensures that completion interrupts are handled on the same vCPU that submitted the request. No IPI is necessary to complete an I/O request and performance is improved. The maximum number of MSI-X vectors and virtqueues limit are respected. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20200818143348.310613-6-stefanha@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-08-27virtio-scsi: introduce a constant for fixed virtqueuesStefan Hajnoczi
The event and control virtqueues are always present, regardless of the multi-queue configuration. Define a constant so that virtqueue number calculations are easier to read. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Message-Id: <20200818143348.310613-5-stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-08-27virtio-pci: add virtio_pci_optimal_num_queues() helperStefan Hajnoczi
Multi-queue devices achieve the best performance when each vCPU has a dedicated queue. This ensures that virtqueue used notifications are handled on the same vCPU that submitted virtqueue buffers. When another vCPU handles the the notification an IPI will be necessary to wake the submission vCPU and this incurs a performance overhead. Provide a helper function that virtio-pci devices will use in later patches to automatically select the optimal number of queues. The function handles guests with large numbers of CPUs by limiting the number of queues to fit within the following constraints: 1. The maximum number of MSI-X vectors. 2. The maximum number of virtqueues. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20200818143348.310613-4-stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-08-21meson: convert hw/virtioMarc-André Lureau
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-21meson: infrastructure for building emulatorsPaolo Bonzini
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-18 15:37:48 +0000