aboutsummaryrefslogtreecommitdiff
path: root/hw/virtio
AgeCommit message (Collapse)Author
2016-07-29vhost: do not update last avail idx on get_vring_base() failureMarc-André Lureau
The state.num value will probably be 0 in this case, but that doesn't make sense to update. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-07-29vhost: add vhost_net_set_backend()Marc-André Lureau
Not all vhost-user backends support ops->vhost_net_set_backend(). It is a nicer to provide an assert/error than to crash trying to call. Furthermore, it improves a bit the code by hiding vhost_ops details. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-07-29vhost-user: add error report in vhost_user_write()Marc-André Lureau
Similar to vhost_user_read() error report, it is useful to have early error report. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-07-29vhost: add assert() to check runtime behaviourMarc-André Lureau
All these functions must be called only after the backend is connected. They are called from virtio-net.c, after either virtio or link status change. The check for nc->peer->link_down should ensure vhost_net_{start,stop}() are always called between vhost_user_{start,stop}(). Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-07-29vhost-user: check vhost_user_{read,write}() return valueMarc-André Lureau
The vhost-user code is quite inconsistent with error handling. Instead of ignoring some return values of read/write and silently going on with invalid state (invalid read for example), break the code flow when the error happened. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-07-29vhost-user: check qemu_chr_fe_set_msgfds() return valueMarc-André Lureau
Check qemu_chr_fe_set_msgfds() for errors, to make sure the message to be sent is correct. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-07-29vhost-user: call set_msgfds unconditionallyMarc-André Lureau
It is fine to call set_msgfds() with 0 fd, and ensures any previous fd array is cleared. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-07-29vhost: use error_report() instead of fprintf(stderr,...)Marc-André Lureau
Let's use qemu proper error reporting API, this ensures the error is reported at the right place (stderr or monitor), with a conventional format. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-07-29vhost: add missing VHOST_OPS_DEBUGMarc-André Lureau
Add missing VHOST_OPS_DEBUG() logs, for completeness. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-07-29vhost: do not assert() on vhost_ops failureMarc-André Lureau
Calling a vhost operation may fail, for example with disconnected vhost-user backend, but qemu shouldn't abort in this case. Log an error instead, except on error and cleanup code paths where it can be mostly ignored. Let's use a VHOST_OPS_DEBUG macro to easily disable those messages once disconnected backend stabilizes. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-07-29vhost: fix calling vhost_dev_cleanup() after vhost_dev_init()Marc-André Lureau
vhost_net_init() calls vhost_dev_init() and in case of failure, calls vhost_dev_cleanup() directly. However, the structure is already partially cleaned on error. Calling vhost_dev_cleanup() again will call vhost_virtqueue_cleanup() on already clean queues, and causing potential double-close. Instead, adjust dev->nvqs and simplify vhost_dev_init() code to not call vhost_virtqueue_cleanup() but vhost_dev_cleanup() instead. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Ilya Maximets <i.maximets@samsung.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-07-29vhost: make vhost_dev_cleanup() idempotentMarc-André Lureau
It is called on multiple code path, so make it safe to call several times (note: I don't remember a reproducer here, but a function called 'cleanup' should probably be idempotent in my book) Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-07-29vhost: fix cleanup on not fully initialized deviceMarc-André Lureau
If vhost_dev_init() failed, caller may still call vhost_dev_cleanup() later. However, vhost_dev_cleanup() tries to remove the device from the list even if it wasn't yet added, which may lead to crashes. Similarly for the memory listener. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-07-29vhost: assert the log was cleaned upMarc-André Lureau
Make sure the log was released on cleanup, or it will leak (the alternative is to call vhost_log_put() unconditionally, but it may hide some dev state issues). Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-07-29vhost: make vhost_log_put() idempotentMarc-André Lureau
Although not strictly required, it is nice to have vhost_log_put() safely callable multiple times. Clear dev->log* when calling vhost_log_put() to make the function idempotent. This also simplifies a bit the caller work. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-07-29vhost: don't assume opaque is a fd, use backend cleanupMarc-André Lureau
vhost-dev opaque isn't necessarily an fd, it can be a chardev when using vhost-user. Goto fail, so vhost_backend_cleanup() is called to handle backend cleanup appropriately. vhost_set_backend_type() should never fail, use an assert(). Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-07-29virtio: check vring descriptor buffer lengthPrasad J Pandit
virtio back end uses set of buffers to facilitate I/O operations. An infinite loop unfolds in virtqueue_pop() if a buffer was of zero size. Add check to avoid it. Reported-by: Li Qiang <liqiang6-s@360.cn> Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-07-29hw/virtio-pci: fix virtio behaviourMarcel Apfelbaum
Enable transitional virtio devices by default. Enable virtio-1.0 for devices plugged into PCIe ports (Root ports or Downstream ports). Using the virtio-1 mode will remove the limitation of the number of devices that can be attached to a machine by removing the need for the IO BAR. Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-07-27virtio: error out if guest exceeds virtqueue sizeStefan Hajnoczi
A broken or malicious guest can submit more requests than the virtqueue size permits, causing unbounded memory allocation in QEMU. The guest can submit requests without bothering to wait for completion and is therefore not bound by virtqueue size. This requires reusing vring descriptors in more than one request, which is not allowed by the VIRTIO 1.0 specification. In "3.2.1 Supplying Buffers to The Device", the VIRTIO 1.0 specification says: 1. The driver places the buffer into free descriptor(s) in the descriptor table, chaining as necessary and Note that the above code does not take precautions against the available ring buffer wrapping around: this is not possible since the ring buffer is the same size as the descriptor table, so step (1) will prevent such a condition. This implies that placing more buffers into the virtqueue than the descriptor table size is not allowed. QEMU is missing the check to prevent this case. Processing a request allocates a VirtQueueElement leading to unbounded memory allocation controlled by the guest. Exit with an error if the guest provides more requests than the virtqueue size permits. This bounds memory allocation and makes the buggy guest visible to the user. This patch fixes CVE-2016-5403 and was reported by Zhenhao Hong from 360 Marvel Team, China. Reported-by: Zhenhao Hong <hongzhenhao@360.cn> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-07-21virtio-balloon: Wrap in vmstateDr. David Alan Gilbert
Forcibly convert it to a vmstate wrapper; proper conversion comes later. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-07-21virtio-rng: Wrap in vmstateDr. David Alan Gilbert
Forcibly convert it to a vmstate wrapper; proper conversion comes later. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-07-21virtio: Migration helper function and macroDr. David Alan Gilbert
To make conversion of virtio devices to VMState simple at first add a helper function for the simple virtio_save case and a helper macro that defines the VMState structure. These will probably go away or change as more of the virtio code gets converted. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-07-21virtio: Introduce virtio_add_queue_aioFam Zheng
Using this function instead of virtio_add_queue marks the vq as aio based. This differentiation will be useful in later patches. Distinguish between virtqueue processing in the iohandler context and main loop AioContext. iohandler context is isolated from AioContexts and therefore does not run during aio_poll(). Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com>
2016-07-21virtio: Add typedef for handle_outputFam Zheng
The function pointer signature has been repeated a few times, using a typedef may make coding easier. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com>
2016-07-21kvm-irqchip: do explicit commit when update irqPeter Xu
In the past, we are doing gsi route commit for each irqchip route update. This is not efficient if we are updating lots of routes in the same time. This patch removes the committing phase in kvm_irqchip_update_msi_route(). Instead, we do explicit commit after all routes updated. Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-07-21kvm-irqchip: simplify kvm_irqchip_add_msi_routePeter Xu
Changing the original MSIMessage parameter in kvm_irqchip_add_msi_route into the vector number. Vector index provides more information than the MSIMessage, we can retrieve the MSIMessage using the vector easily. This will avoid fetching MSIMessage every time before adding MSI routes. Meanwhile, the vector info will be used in the coming patches to further enable gsi route update notifications. Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-07-14virtio-mmio: format transport base address in BusClass.get_dev_pathLaszlo Ersek
At the moment the following QEMU command line triggers an assertion failure (minimal reproducer by Cole): qemu-system-aarch64 \ -machine virt-2.6,accel=tcg \ -nodefaults \ -no-user-config \ -nographic -monitor stdio \ -device virtio-scsi-device,id=scsi0 \ -device virtio-scsi-device,id=scsi1 \ -drive file=foo.img,format=raw,if=none,id=d0 \ -device scsi-hd,bus=scsi0.0,drive=d0 \ -drive file=foo.img,format=raw,if=none,id=d1 \ -device scsi-hd,bus=scsi1.0,drive=d1 qemu-system-aarch64: migration/savevm.c:615: vmstate_register_with_alias_id: Assertion `!se->compat || se->instance_id == 0' failed. The reason is that the vmstate sections for the two scsi-hd devices are not uniquely identifiable by name. The direct parent buses of the scsi-hd devices -- scsi0.0 and scsi1.0 -- support the BusClass.get_dev_path member function. scsibus_get_dev_path() formats a device path prefix with the help of its topologically parent bus, and then appends the chan:id:lun triplet to it. For both scsi-hd devices, this triplet is 0:0:0. (Here we use "device path" in the QEMU migration sense, for vmstate section identification, not in the OFW or UEFI device path senses.) The virtio-scsi HBA is plugged into the virtio-mmio bus (implemented by the internal VirtIOMMIOProxy device). This bus class (TYPE_VIRTIO_MMIO_BUS) inherits, as its get_dev_path() member function, the virtio_bus_get_dev_path() method from its parent class (TYPE_VIRTIO_BUS). virtio_bus_get_dev_path() does not format any kind of device address on its own; "virtio addresses" are transport-specific. Therefore virtio_bus_get_dev_path() asks the topologically parent bus of the proxy object (implementing the specific virtio transport) to format the address of the proxy object. (For virtio-pci devices (where the proxy is an instance of VirtIOPCIProxy, plugged into a PCI bus), this ends up in pcibus_get_dev_path().) However, VirtIOMMIOProxy is usually (in practice: always) plugged into "main-system-bus", the singleton TYPE_SYSTEM_BUS object. This BusClass does not support formatting QEMU vmstate device paths at all (as SysBusDevice objects can have zero or more IO ports and zero or more MMIO regions). Hence the formatting request delegated from virtio_bus_get_dev_path() gets answered with NULL. The end result is that the two scsi-hd devices end up with the same device path "0:0:0", which triggers the assert. We can solve this by recognizing that virtio-mmio transports are distinguished from each other by their base addresses in MMIO address space. Implement virtio_mmio_bus_get_dev_path() as follows: (1) The virtio device whose devpath is to be formatted resides on a virtio-mmio bus that is implemented by a VirtIOMMIOProxy object. Ask the parent bus of VirtIOMMIOProxy to format the device path of VirtIOMMIOProxy, as a path prefix. (This is identical to what virtio_bus_get_dev_path() does.) (2) Append the base address of VirtIOMMIOProxy to the device path, such as: - virtio-mmio@000000000a003e00, - virtio-mmio@000000000a003c00. Given that these device paths are placed in the migration stream, step (2) above, if done unconditionally, would break migration. So make that step conditional on a new VirtIOMMIOProxy property, which is enabled for 2.7 machine types and later. Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Cole Robinson <crobinso@redhat.com> Cc: Dr. David Alan Gilbert <dgilbert@redhat.com> Cc: Kevin Zhao <kevin.zhao@linaro.org> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Tom Hanson <thomas.hanson@linaro.org> Reported-by: Kevin Zhao <kevin.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Laszlo Ersek <lersek@redhat.com> Message-id: 1467739394-28357-1-git-send-email-lersek@redhat.com Fixes: https://bugs.launchpad.net/qemu/+bug/1594239 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-07-12Use #include "..." for our own headers, <...> for othersMarkus Armbruster
Tracked down with an ugly, brittle and probably buggy Perl script. Also move includes converted to <...> up so they get included before ours where that's obviously okay. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Tested-by: Eric Blake <eblake@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2016-07-07tap: vhost busy polling supportJason Wang
This patch add the capability of basic vhost net busy polling which is supported by recent kernel. User could configure the maximum number of us that could be spent on busy polling through a new property of tap "poll-us". Cc: Greg Kurz <groug@kaod.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-07-06qapi: Add parameter to visit_end_*Eric Blake
Rather than making the dealloc visitor track of stack of pointers remembered during visit_start_* in order to free them during visit_end_*, it's a lot easier to just make all callers pass the same pointer to visit_end_*. The generated code has access to the same pointer, while all other users are doing virtual walks and can pass NULL. The dealloc visitor is then greatly simplified. All three visit_end_*() functions intentionally take a void**, even though the visit_start_*() functions differ between void**, GenericList**, and GenericAlternate**. This is done for several reasons: when doing a virtual walk, passing NULL doesn't care what the type is, but when doing a generated walk, we already have to cast the caller's specific FOO* to call visit_start, while using void** lets us use visit_end without a cast. Also, an upcoming patch will add a clone visitor that wants to use the same implementation for all three visit_end callbacks, which is made easier if all three share the same signature. For visitors with already track per-object state (the QMP visitors via a stack, and the string visitors which do not allow nesting), add an assertion that the caller is indeed passing the same pointer to paired calls. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1465490926-28625-4-git-send-email-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-07-04virtio: set low features early on loadMichael S. Tsirkin
virtio migrates the low 32 feature bits twice, the first copy is there for compatibility but ever since 019a3edbb25f1571e876f8af1ce4c55412939e5d: ("virtio: make features 64bit wide") it's ignored on load. This is wrong since virtio_net_load tests self announcement and guest offloads before the second copy including high feature bits is loaded. This means that self announcement, control vq and guest offloads are all broken after migration. Fix it up by loading low feature bits: somewhat ugly since high and low bits become out of sync temporarily, but seems unavoidable for compatibility. The right thing to do for new features is probably to test the host features, anyway. Fixes: 019a3edbb25f1571e876f8af1ce4c55412939e5d ("virtio: make features 64bit wide") Cc: qemu-stable@nongnu.org Reported-by: Robin Geuze <robing@transip.nl> Tested-by: Robin Geuze <robing@transip.nl> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-07-04virtio: revert host notifiers to old semanticsCornelia Huck
The host notifier rework tried both to unify host notifiers across transports and plug a possible hole during host notifier re-assignment. Unfortunately, this meant a change in semantics that breaks vhost and iSCSI+dataplane. As the minimal fix, keep the common host notifier code but revert to the old semantics so that we have time to figure out the proper fix. Fixes: 6798e245a3 ("virtio-bus: common ioeventfd infrastructure") Reported-by: Peter Lieven <pl@kamp.de> Reported-by: Jason Wang <jasowang@redhat.com> Reported-by: Marc-André Lureau <marcandre.lureau@gmail.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Tested-by: Jason Wang <jasowang@redhat.com> Tested-by: Peter Lieven <pl@kamp.de>
2016-06-24virtio-bus: remove old set_host_notifier callbackCornelia Huck
All users have been converted to the new ioevent callbacks. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-24virtio-mmio: convert to ioeventfd callbacksCornelia Huck
Convert to the new interface. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-24virtio-pci: convert to ioeventfd callbacksCornelia Huck
Convert to new interface. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-24virtio-bus: have callers tolerate new host notifier apiCornelia Huck
Have vhost and dataplane use the new api for transports that have been converted. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-24virtio-bus: common ioeventfd infrastructureCornelia Huck
Introduce a set of ioeventfd callbacks on the virtio-bus level that can be implemented by the individual transports. At the virtio-bus level, do common handling for host notifiers (which is actually most of it). Two things of note: - When setting the host notifier, we only switch from/to the generic ioeventfd handler. This fixes a latent bug where we had no ioeventfd assigned for a certain window. - We always iterate over all possible virtio queues, even though ccw (currently) has a lower limit. It does not really matter here. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-20Merge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' ↵Peter Maydell
into staging # gpg: Signature made Mon 20 Jun 2016 21:29:27 BST # gpg: using RSA key 0x9CA4ABB381AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" # Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8 * remotes/stefanha/tags/tracing-pull-request: (42 commits) trace: split out trace events for linux-user/ directory trace: split out trace events for qom/ directory trace: split out trace events for target-ppc/ directory trace: split out trace events for target-s390x/ directory trace: split out trace events for target-sparc/ directory trace: split out trace events for net/ directory trace: split out trace events for audio/ directory trace: split out trace events for ui/ directory trace: split out trace events for hw/alpha/ directory trace: split out trace events for hw/arm/ directory trace: split out trace events for hw/acpi/ directory trace: split out trace events for hw/vfio/ directory trace: split out trace events for hw/s390x/ directory trace: split out trace events for hw/pci/ directory trace: split out trace events for hw/ppc/ directory trace: split out trace events for hw/9pfs/ directory trace: split out trace events for hw/i386/ directory trace: split out trace events for hw/isa/ directory trace: split out trace events for hw/sd/ directory trace: split out trace events for hw/sparc/ directory ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-20trace: split out trace events for hw/virtio/ directoryDaniel P. Berrange
Move all trace-events for files in the hw/virtio/ directory to their own file. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1466066426-16657-12-git-send-email-berrange@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-20coccinelle: Remove unnecessary variables for function return valueEduardo Habkost
Use Coccinelle script to replace 'ret = E; return ret' with 'return E'. The script will do the substitution only when the function return type and variable type are the same. Manual fixups: * audio/audio.c: coding style of "read (...)" and "write (...)" * block/qcow2-cluster.c: wrap line to make it shorter * block/qcow2-refcount.c: change indentation of wrapped line * target-tricore/op_helper.c: fix coding style of "remainder|quotient" * target-mips/dsp_helper.c: reverted changes because I don't want to argue about checkpatch.pl * ui/qemu-pixman.c: fix line indentation * block/rbd.c: restore blank line between declarations and statements Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <1465855078-19435-4-git-send-email-ehabkost@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Unused Coccinelle rule name dropped along with a redundant comment; whitespace touched up in block/qcow2-cluster.c; stale commit message paragraph deleted] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-06-16os-posix: include sys/mman.hPaolo Bonzini
qemu/osdep.h checks whether MAP_ANONYMOUS is defined, but this check is bogus without a previous inclusion of sys/mman.h. Include it in sysemu/os-posix.h and remove it from everywhere else. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-07Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into ↵Peter Maydell
staging # gpg: Signature made Tue 07 Jun 2016 15:26:09 BST # gpg: using RSA key 0x9CA4ABB381AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" * remotes/stefanha/tags/block-pull-request: throttle: refuse iops-size without iops-total/read/write block: Drop bdrv_ioctl_bh_cb block: Move BlockRequest type to io.c block/io: optimize bdrv_co_pwritev for small requests iostatus: fix comments for block_job_iostatus_reset block/io: Remove unused bdrv_aio_write_zeroes() virtio: drop duplicate virtio_queue_get_id() function virtio-scsi: Remove op blocker for dataplane virtio-blk: Remove op blocker for dataplane blockdev-backup: Don't move target AioContext if it's attached blockdev-backup: Use bdrv_lookup_bs on target tests: avoid coroutine pool test crash Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-07virtio: drop duplicate virtio_queue_get_id() functionStefan Hajnoczi
The virtio_queue_get_id() function is the lesser used duplicate of virtio_get_queue_index(). Use the latter instead. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1463767461-17922-1-git-send-email-stefanha@redhat.com
2016-06-07virtio: move bi-endian target support to a single locationGreg Kurz
Paolo's recent cpu.h cleanups broke legacy virtio for ppc64 LE guests (and arm BE guests as well, even if I have not verified that). Especially, commit "33c11879fd42 qemu-common: push cpu.h inclusion out of qemu-common.h" has the side-effect of silently hiding the TARGET_IS_BIENDIAN macro from the virtio memory accessors, and thus fully disabling support of endian changing targets. To be sure this cannot happen again, let's gather all the bi-endian bits where they belong in include/hw/virtio/virtio-access.h. The changes in hw/virtio/vhost.c are safe because vhost_needs_vring_endian() is not called on a hot path and non bi-endian targets will return false anyway. While here, also rename TARGET_IS_BIENDIAN to be more precise: it is only for legacy virtio and bi-endian guests. Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-29memory: split memory_region_from_host from qemu_ram_addr_from_hostPaolo Bonzini
Move the old qemu_ram_addr_from_host to memory_region_from_host and make it return an offset within the region. For qemu_ram_addr_from_host return the ram_addr_t directly, similar to what it was before commit 1b5ec23 ("memory: return MemoryRegion from qemu_ram_addr_from_host", 2013-07-04). Reviewed-by: Marc-André Lureau <marcandre.lureau@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-29memory: remove qemu_get_ram_fd, qemu_set_ram_fd, qemu_ram_block_host_ptrPaolo Bonzini
Remove direct uses of ram_addr_t and optimize memory_region_{get,set}_fd now that a MemoryRegion knows its RAMBlock directly. Reviewed-by: Marc-André Lureau <marcandre.lureau@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-12qapi: Split visit_end_struct() into piecesEric Blake
As mentioned in previous patches, we want to call visit_end_struct() functions unconditionally, so that visitors can release resources tied up since the matching visit_start_struct() without also having to worry about error priority if more than one error occurs. Even though error_propagate() can be safely used to ignore a second error during cleanup caused by a first error, it is simpler if the cleanup cannot set an error. So, split out the error checking portion (basically, input visitors checking for unvisited keys) into a new function visit_check_struct(), which can be safely skipped if any earlier errors are encountered, and leave the cleanup portion (which never fails, but must be called unconditionally if visit_start_struct() succeeded) in visit_end_struct(). Generated code in qapi-visit.c has diffs resembling: |@@ -59,10 +59,12 @@ void visit_type_ACPIOSTInfo(Visitor *v, | goto out_obj; | } | visit_type_ACPIOSTInfo_members(v, obj, &err); |- error_propagate(errp, err); |- err = NULL; |+ if (err) { |+ goto out_obj; |+ } |+ visit_check_struct(v, &err); | out_obj: |- visit_end_struct(v, &err); |+ visit_end_struct(v); | out: and in qapi-event.c: @@ -47,7 +47,10 @@ void qapi_event_send_acpi_device_ost(ACP | goto out; | } | visit_type_q_obj_ACPI_DEVICE_OST_arg_members(v, &param, &err); |- visit_end_struct(v, err ? NULL : &err); |+ if (!err) { |+ visit_check_struct(v, &err); |+ } |+ visit_end_struct(v); | if (err) { | goto out; Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1461879932-9020-20-git-send-email-eblake@redhat.com> [Conflict with a doc fixup resolved] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-04-22virtio: Mark host notifiers as externalFam Zheng
The effect of this change is the block layer drained section can work, for example when mirror job is being completed. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-04-22event-notifier: Add "is_external" parameterFam Zheng
All callers pass "false" keeping the old semantics. The windows implementation doesn't distinguish the flag yet. On posix, it is passed down to the underlying aio context. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-04-14hw/virtio/balloon: Replace TARGET_PAGE_SIZE with BALLOON_PAGE_SIZEThomas Huth
The balloon code currently calls madvise() with TARGET_PAGE_SIZE as length parameter. Since the virtio-balloon protocol is always based on 4k pages, no matter what the host and guest are using as page size, this could cause problems: If TARGET_PAGE_SIZE is bigger than 4k, the madvise call also destroys the 4k areas after the current one - which might be wrong since the guest did not want free that area yet (in case the guest used as smaller MMU page size than the hard-coded TARGET_PAGE_SIZE). So to fix this issue, introduce a proper define called BALLOON_PAGE_SIZE (which is 4096) to use this as the size parameter for the madvise() call instead. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-16 11:08:36 +0000