aboutsummaryrefslogtreecommitdiff
path: root/hw/virtio
AgeCommit message (Collapse)Author
2017-05-25vhost-user: pass message as a pointer to process_message_reply()Maxime Coquelin
process_message_reply() was recently updated to get full message content instead of only its request field. There is no need to copy all the struct content into the stack, so just pass its pointer as const. Reviewed-by: Jens Freimann <jfreiman@redhat.com> Reviewed-by: Zhiyong Yang <zhiyong.yang@intel.com> Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2017-05-18migration: migration.h was not neededJuan Quintela
This files don't use any function from migration.h, so drop it. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com>
2017-05-18Merge remote-tracking branch 'quintela/tags/migration/20170517' into stagingStefan Hajnoczi
migration/next for 20170517 # gpg: Signature made Wed 17 May 2017 11:46:36 AM BST # gpg: using RSA key 0xF487EF185872D723 # gpg: Good signature from "Juan Quintela <quintela@redhat.com>" # gpg: aka "Juan Quintela <quintela@trasno.org>" # Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723 * quintela/tags/migration/20170517: migration: Move check_migratable() into qdev.c migration: Move postcopy stuff to postcopy-ram.c migration: Move page_cache.c to migration/ migration: Create migration/blocker.h ram: Rename RAM_SAVE_FLAG_COMPRESS to RAM_SAVE_FLAG_ZERO migration: Pass Error ** argument to {save,load}_vmstate migration: Fix regression with compression threads Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-05-18virtio: allow broken device to notify guestGreg Kurz
According to section 2.1.2 of the virtio-1 specification: "The device SHOULD set DEVICE_NEEDS_RESET when it enters an error state that a reset is needed. If DRIVER_OK is set, after it sets DEVICE_NEEDS_RESET, the device MUST send a device configuration change notification to the driver." Commit "f5ed36635d8f virtio: stop virtqueue processing if device is broken" introduced a virtio_error() call that just does that: - internally mark the device as broken - set the DEVICE_NEEDS_RESET bit in the status - send a configuration change notification Unfortunately, virtio_notify_vector(), called by virtio_notify_config(), returns right away when the device is marked as broken and the notification isn't sent in this case. The spec doesn't say whether a broken device can send notifications in other situations or not. But since the driver isn't supposed to do anything but to reset the device, it makes sense to keep the check in virtio_notify_config(). Marking the device as broken AFTER the configuration change notification was sent is enough to fix the issue. Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-05-17migration: Create migration/blocker.hJuan Quintela
This allows us to remove lots of includes of migration/migration.h Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-05-10hw/virtio: fix vhost user fails to startup when MQZhiyong Yang
Qemu2.7~2.9 and vhost user for dpdk 17.02 release work together to cause failures of new connection when negotiating to set MQ. (one queue pair works well). Because there exist some bugs in qemu code when introducing VHOST_USER_PROTOCOL_F_REPLY_ACK to qemu. When vhost_user_set_mem_table is invoked to deal with the vhost message VHOST_USER_SET_MEM_TABLE for the second time, qemu indeed doesn't send the messge (The message needs to be sent only once)but still will be waiting for dpdk's reply ack, then, qemu is always freezing, while DPDK is always waiting for next vhost message from qemu. The patch aims to fix the bug, MQ can work well. The same bug is found in function vhost_user_net_set_mtu, it is fixed at the same time. DPDK related patch is as following: http://www.dpdk.org/dev/patchwork/patch/23955/ Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com> Cc: qemu-stable@nongnu.org Fixes: ca525ce5618b ("vhost-user: Introduce a new protocol feature REPLY_ACK.") Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Jens Freimann <jfreiman@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2017-04-21Merge remote-tracking branch 'remotes/juanquintela/tags/migration/20170421' ↵Peter Maydell
into staging migration/next for 20170421 # gpg: Signature made Fri 21 Apr 2017 11:28:13 BST # gpg: using RSA key 0xF487EF185872D723 # gpg: Good signature from "Juan Quintela <quintela@redhat.com>" # gpg: aka "Juan Quintela <quintela@trasno.org>" # Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723 * remotes/juanquintela/tags/migration/20170421: (65 commits) hmp: info migrate_parameters format tunes hmp: info migrate_capability format tunes migration: rename max_size to threshold_size migration: set current_active_state once virtio-rng: stop virtqueue while the CPU is stopped migration: don't close a file descriptor while it can be in use ram: Remove migration_bitmap_extend() migration: Disable hotplug/unplug during migration qdev: Move qdev_unplug() to qdev-monitor.c qdev: Export qdev_hot_removed qdev: qdev_hotplug is really a bool migration: Remove MigrationState parameter from migration_is_idle() ram: Use RAMBitmap type for coherence ram: rename last_ram_offset() last_ram_pages() ram: Use ramblock and page offset instead of absolute offset ram: Change offset field in PageSearchStatus to page ram: Remember last_page instead of last_offset ram: Use page number instead of an address for the bitmap operations ram: reorganize last_sent_block ram: ram_discard_range() don't use the mis parameter ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-04-21virtio-rng: stop virtqueue while the CPU is stoppedLaurent Vivier
If we modify the virtio-rng virqueue while the vmstate is already migrated we can have some inconsistencies between the virtqueue state and the memory content. To avoid this, stop the virtqueue while the CPU is stopped. Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Amit Shah <amit@kernel.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-04-20memory: add section range info for IOMMU notifierPeter Xu
In this patch, IOMMUNotifier.{start|end} are introduced to store section information for a specific notifier. When notification occurs, we not only check the notification type (MAP|UNMAP), but also check whether the notified iova range overlaps with the range of specific IOMMU notifier, and skip those notifiers if not in the listened range. When removing an region, we need to make sure we removed the correct VFIOGuestIOMMU by checking the IOMMUNotifier.start address as well. This patch is solving the problem that vfio-pci devices receive duplicated UNMAP notification on x86 platform when vIOMMU is there. The issue is that x86 IOMMU has a (0, 2^64-1) IOMMU region, which is splitted by the (0xfee00000, 0xfeefffff) IRQ region. AFAIK this (splitted IOMMU region) is only happening on x86. This patch also helps vhost to leverage the new interface as well, so that vhost won't get duplicated cache flushes. In that sense, it's an slight performance improvement. Suggested-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <1491562755-23867-2-git-send-email-peterx@redhat.com> [ehabkost: included extra vhost_iommu_region_del() change from Peter Xu] Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2017-03-30vhost: generalize iommu memory regionJason Wang
We assumes the iommu_ops were attached to the root region of address space. This may not be true for all kinds of IOMMU implementation and especially after commit 3716d5902d74 ("pci: introduce a bus master container"). So fix this by not assuming as->root has iommu_ops, instead depending on the regions reported by memory listener through: - register a memory listener to dma_as - during region_add, if it's a region of IOMMU, register a specific IOMMU notifier, and store all notifiers in a list. - during region_del, compare and delete the IOMMU notifier from the list This is also a must for making vhost device IOTLB works for all types of IOMMUs. Note, since we register one notifier during each .region_add, the IOTLB may be flushed more than one times, this is suboptimal and could be optimized in the future. Reported-by: Maxime Coquelin <maxime.coquelin@redhat.com> Fixes: 3716d5902d74 ("pci: introduce a bus master container") Cc: Peter Xu <peterx@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Tested-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2017-03-22virtio: always use handle_aio_output if registeredPaolo Bonzini
Commit ad07cd6 ("virtio-scsi: always use dataplane path if ioeventfd is active", 2016-10-30) and 9ffe337 ("virtio-blk: always use dataplane path if ioeventfd is active", 2016-10-30) broke the virtio 1.0 indirect access registers. The indirect access registers bypass the ioeventfd, so that virtio-blk and virtio-scsi now repeatedly try to initialize dataplane instead of triggering the guest->host EventNotifier. Detect the situation by checking vq->handle_aio_output; if it is not NULL, trigger the EventNotifier, which is how the device expects to get notifications and in fact the only thread-safe manner to deliver them. Fixes: ad07cd6 Fixes: 9ffe337 Cc: qemu-stable@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-03-22virtio: Fix error handling in virtio_bus_device_pluggedFam Zheng
For one thing we shouldn't continue if an error happened, for the other two steps failing can cause an abort() in error_setg because we reuse the same errp blindly. Add error handling checks to fix both issues. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-03-16hw/virtio: fix Power Management Control Register for PCI Express virtio devicesMarcel Apfelbaum
Make Power Management State flag writable to conform with the PCI Express spec. Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-03-16hw/virtio: fix Link Control Register for PCI Express virtio devicesMarcel Apfelbaum
Make several Link Control Register flags writable to conform with the PCI Express spec. Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-03-16hw/virtio: fix error enabling flags in Device Control registerMarcel Apfelbaum
When the virtio devices are PCI Express, make error-enabling flags writable to respect the PCIe spec. Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-03-15virtio-pci: reset modern vq meta dataJason Wang
We don't reset proxy->vqs[].{num|desc[]|avail[]|used[]}. This means if a driver enable the vq without setting vq address after reset. The old addresses were leaked. Fixing this by resetting modern vq meta data during device reset. Cc: qemu-stable@nongnu.org Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-03-15Revert "virtio: unbreak virtio-pci with IOMMU after caching ring translations"Jason Wang
This reverts commit 96a8821d21411f10d77ea994af369c6e5c35a2cc. Previous patch is a better solution which does not require a strict order between virtio and IOMMU. CC: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-03-15virtio: validate address space cache during initJason Wang
We don't check the return value of address_space_cache_init(), this may lead buggy driver use incorrect region caches. Instead of triggering an assert, catch and warn this early in virtio_init_region_cache(). Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-03-15virtio: destroy region cache during resetJason Wang
We don't destroy region cache during reset which can make the maps of previous driver leaked to a buggy or malicious driver that don't set vring address before starting to use the device. Fix this by destroy the region cache during reset and validate it before trying to see them. Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-03-15virtio: guard against NULL pfnJason Wang
To avoid access stale memory region cache after reset, this patch check the existence of virtqueue pfn for all exported virtqueue access helpers before trying to use them. Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-03-02virtio: unbreak virtio-pci with IOMMU after caching ring translationsJason Wang
Commit c611c76417f5 ("virtio: add MemoryListener to cache ring translations") registers a memory listener to dma_as. This may not work when IOMMU is enabled: dma_as(bus_master_as) were initialized in pcibus_machine_done() after virtio_realize(). This will cause a segfault. Fixing this by using pci_device_iommu_address_space() instead to make sure address space were initialized at this time. With this fix, IOMMU device were required to be initialized before any virtio-pci devices. Fixes: c611c76417f5 ("virtio: add MemoryListener to cache ring translations") Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-03-02virtio: add missing region cache init in virtio_load()Stefan Hajnoczi
Commit 97cd965c070152bc626c7507df9fb356bbe1cd81 ("virtio: use VRingMemoryRegionCaches for avail and used rings") switched to a memory region cache to avoid repeated map/unmap operations. The virtio_load() process is a little tricky because vring addresses are serialized in two separate places. VIRTIO 1.0 devices serialize desc and then a subsection with used and avail. Legacy devices only serialize desc. Live migration of VIRTIO 1.0 devices fails on the destination host with: VQ 0 size 0x80 < last_avail_idx 0x12f8 - used_idx 0x0 Failed to load virtio-blk:virtio error while loading state for instance 0x0 of device '0000:00:04.0/virtio-blk' This happens because the memory region cache is only initialized after desc is loaded and not after the used and avail subsection is loaded. If the guest chose memory addresses that don't match the legacy ring layout then the wrong guest memory location is accessed. Wait until all ring addresses are known before trying to initialize the region cache. Also clarify the incomplete comment about VIRTIO-1 ring address subsection. Cc: Dr. David Alan Gilbert <dgilbert@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Tested-by: Eric Auger <eric.auger@redhat.com>
2017-03-02virtio: invalidate memory in vring_set_avail_event()Stefan Hajnoczi
Remember to invalidate the avail event field so the memory pages are marked dirty. Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Eric Auger <eric.auger@redhat.com>
2017-03-02virtio: guard vring access when setting notificationCornelia Huck
Switching to vring caches exposed an existing bug in virtio_queue_set_notification(): We can't access vring structures if they have not been set up yet. This may happen, for example, for virtio-blk devices with multiple queues: The code will try to switch notifiers for every queue, but the guest may have only set up a subset of them. Fix this by guarding access to the vring memory by checking for vring.desc. The first aio poll will iron out any remaining inconsistencies for later-configured queues (buggy legacy drivers). Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-03-02virtio: check for vring setup in virtio_queue_emptyPaolo Bonzini
If the vring has not been set up, there is nothing in the virtqueue. virtio_queue_host_notifier_aio_poll calls virtio_queue_empty even in this case; we have to filter it out just like virtio_queue_notify_aio_vq. Reported-by: Gerd Hoffmann <kraxel@redhat.com> Tested-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2017-02-17virtio: Fix no interrupt when not creating msi controllerMichael S. Tsirkin
For ARM virt machine, if we use virt-2.7 which will not create ITS node, the virtio-net can not recieve interrupts so it can't get ip address through dhcp. This fixes commit 83d768b(virtio: set ISR on dataplane notifications). Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-02-17virtio: use VRingMemoryRegionCaches for avail and used ringsPaolo Bonzini
The virtio-net change is necessary because it uses virtqueue_fill and virtqueue_flush instead of the more convenient virtqueue_push. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-02-17virtio: check for vring setup in virtio_queue_update_used_idxPaolo Bonzini
If the vring has not been set up, it is not necessary for vring_used_idx to do anything (as is already the case when the caller is virtio_load). This is harmless for now, but it will be a problem when the MemoryRegionCache has not been set up. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-02-17virtio: use VRingMemoryRegionCaches for descriptor ringPaolo Bonzini
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-02-17virtio: add MemoryListener to cache ring translationsPaolo Bonzini
The cached translations are RCU-protected to allow efficient use when processing virtqueues. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-02-17virtio: use MemoryRegionCache to access descriptorsPaolo Bonzini
For now, the cache is created on every virtqueue_pop. Later on, direct descriptors will be able to reuse it. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-02-17virtio: use address_space_map/unmap to access descriptorsPaolo Bonzini
This makes little difference, but it makes the code change smaller for the next patch that introduces MemoryRegionCache. This is because map/unmap are similar to MemoryRegionCache init/destroy. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-02-17virtio: Report real progress in VQ aio poll handlerFam Zheng
In virtio_queue_host_notifier_aio_poll, not all "!virtio_queue_empty()" cases are making true progress. Currently the offending one is virtio-scsi event queue, whose handler does nothing if no event is pending. As a result aio_poll() will spin on the "non-empty" VQ and take 100% host CPU. Fix this by reporting actual progress from virtio queue aio handlers. Reported-by: Ed Swierk <eswierk@skyportsystems.com> Signed-off-by: Fam Zheng <famz@redhat.com> Tested-by: Ed Swierk <eswierk@skyportsystems.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-02-01vhost: skip ROM sectionsMichael S. Tsirkin
vhost does not support RO protections on memory at the moment - adding ROMs would mean that e.g. a buggy guest might change them in-memory - a condition from which guest reset does not recover. Not nice. We also definitely don't want to try logging writes into ROMs - in particular guests set very high addresses for ROM BARs so logging these writes would waste a lot of memory. Maybe ROMs could be supported with the iotlb variant - not sure, but there seems to be no good reason for virtio to try to do DMA from ROM. So let's just skip ROM memory. Suggested-by: Laurent Vivier <lvivier@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Laurent Vivier <lvivier@redhat.com> Tested-by: Laurent Vivier <lvivier@redhat.com>
2017-02-01virtio: make virtio_should_notify staticPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-02-01pci: Convert msix_init() to Error and fix callersCao jin
msix_init() reports errors with error_report(), which is wrong when it's used in realize(). The same issue was fixed for msi_init() in commit 1108b2f. In order to make the API change as small as possible, leave the return value check to later patch. For some devices(like e1000e, vmxnet3, nvme) who won't fail because of msix_init's failure, suppress the error report by passing NULL error object. Bonus: add comment for msix_init. CC: Jiri Pirko <jiri@resnulli.us> CC: Gerd Hoffmann <kraxel@redhat.com> CC: Dmitry Fleytman <dmitry@daynix.com> CC: Jason Wang <jasowang@redhat.com> CC: Michael S. Tsirkin <mst@redhat.com> CC: Hannes Reinecke <hare@suse.de> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Alex Williamson <alex.williamson@redhat.com> CC: Markus Armbruster <armbru@redhat.com> CC: Marcel Apfelbaum <marcel@redhat.com> Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-01-25Merge remote-tracking branch 'remotes/mjt/tags/trivial-patches-fetch' into ↵Peter Maydell
staging trivial patches for 2017-01-24 # gpg: Signature made Tue 24 Jan 2017 20:27:08 GMT # gpg: using RSA key 0x701B4F6B1A693E59 # gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>" # gpg: aka "Michael Tokarev <mjt@corpit.ru>" # gpg: aka "Michael Tokarev <mjt@debian.org>" # Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D 4324 457C E0A0 8044 65C5 # Subkey fingerprint: 7B73 BAD6 8BE7 A2C2 8931 4B22 701B 4F6B 1A69 3E59 * remotes/mjt/tags/trivial-patches-fetch: (31 commits) hw/isa/isa-bus: Set category of the "isabus-bridge" device usb: Set category and description of the MTP device gdbstub.c: update old error report statements gdbstub.c: fix GDB connection segfault caused by empty machines scsi-disk: add 'fall through' comment to switch VERIFY cases Drop duplicate display option documentation hw/display/framebuffer.c: Avoid overflow for framebuffers > 4GB win32: use glib gpoll if glib >= 2.50 util/mmap-alloc: refactor a little bit for readability util/mmap-alloc: check parameter before using vfio: remove a duplicated word in comments docs: sync pci-ids.txt disas/cris.c: Fix Coverity warning about unchecked NULL lm32: milkymist-tmu2: fix another integer overflow hw/i386/kvmvapic: Remove dead code in patch_hypercalls() doc/usb2: fix typo qga: fix erroneous argument to strerror block: remove dead check pci-assign: avoid pointless stat qemu-img: remove dead check ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-24hw: Fix typos found by codespellStefan Weil
Signed-off-by: Stefan Weil <sw@weilnetz.de> Acked-by: Alistair Francis <alistair.francis@xilinx.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-01-24migration: disallow migrate_add_blocker during migrationAshijeet Acharya
If a migration is already in progress and somebody attempts to add a migration blocker, this should rightly fail. Add an errp parameter and a retcode return value to migrate_add_blocker. Signed-off-by: John Snow <jsnow@redhat.com> Signed-off-by: Ashijeet Acharya <ashijeetacharya@gmail.com> Message-Id: <1484566314-3987-5-git-send-email-ashijeetacharya@gmail.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Acked-by: Greg Kurz <groug@kaod.org> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Merged with recent 'Allow invtsc migration' change
2017-01-24migration: extend VMStateInfoJianjun Duan
Current migration code cannot handle some data structures such as QTAILQ in qemu/queue.h. Here we extend the signatures of put/get in VMStateInfo so that customized handling is supported. put now will return int type. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Jianjun Duan <duanj@linux.vnet.ibm.com> Message-Id: <1484852453-12728-2-git-send-email-duanj@linux.vnet.ibm.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-01-20Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
* QOM interface fix (Eduardo) * RTC fixes (Gaohuai, Igor) * Memory leak fixes (Li Qiang, me) * Ctrl-a b regression (Marc-André) * Stubs cleanups and fixes (Leif, me) * hxtool tweak (me) * HAX support (Vincent) * QemuThread, exec.c and SCSI fixes (Roman, Xinhua, me) * PC_COMPAT_2_8 fix (Marcelo) * stronger bitmap assertions (Peter) # gpg: Signature made Fri 20 Jan 2017 12:49:01 GMT # gpg: using RSA key 0xBFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (35 commits) pc.h: move x-mach-use-reliable-get-clock compat entry to PC_COMPAT_2_8 bitmap: assert that start and nr are non negative Revert "win32: don't run subprocess tests on Mingw32 platform" hax: add Darwin support Plumb the HAXM-based hardware acceleration support target/i386: Add Intel HAX files kvm: move cpu synchronization code KVM: PPC: eliminate unnecessary duplicate constants ramblock-notifier: new char: fix ctrl-a b not working exec: Add missing rcu_read_unlock x86: ioapic: fix fail migration when irqchip=split x86: ioapic: dump version for "info ioapic" x86: ioapic: add traces for ioapic hxtool: emit Texinfo headings as @subsection qemu-thread: fix qemu_thread_set_name() race in qemu_thread_create() serial: fix memory leak in serial exit scsi-block: fix direction of BYTCHK test for VERIFY commands pc: fix crash in rtc_set_memory() if initial cpu is marked as hotplugged acpi: filter based on CONFIG_ACPI_X86 rather than TARGET ... # Conflicts: # include/hw/i386/pc.h
2017-01-20Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20170120-v2' into ↵Peter Maydell
staging First set of s390x patches for 2.9: - rework of the zpci code, giving us proper multibus support - introduction of the 2.9 machine - fixes and improvements # gpg: Signature made Fri 20 Jan 2017 09:11:58 GMT # gpg: using RSA key 0xDECF6B93C6F02FAF # gpg: Good signature from "Cornelia Huck <huckc@linux.vnet.ibm.com>" # gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>" # Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF * remotes/cohuck/tags/s390x-20170120-v2: virtio-ccw: fix ring sizing s390x/pci: merge msix init functions s390x/pci: handle PCIBridge bus number s390x/pci: use hashtable to look up zpci via fh s390x/pci: PCI multibus bridge handling s390x/pci: optimize calling s390_get_phb() s390x/pci: change the device array to a list s390x/pci: dynamically allocate iommu s390x/pci: make S390PCIIOMMU inherit Object s390x/kvm: use kvm_gsi_routing_enabled in flic s390x: add compat machine for 2.9 s390x: remove double compat statement Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-20virtio-ccw: fix ring sizingMichael S. Tsirkin
Current code seems to assume ring size is always decreased but this is not required by spec: what spec says is just that size can not exceed the maximum. Fix it up. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <1484256243-1982-1-git-send-email-mst@redhat.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2017-01-19virtio: force VIRTIO_F_IOMMU_PLATFORMJason Wang
We allow vhost to clear VIRITO_F_IOMMU_PLATFORM which is wrong since VIRTIO_F_IOMMU_PLATFORM is mandatory for security. Fixing this by enforce it after vdc->get_features(). Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-01-19virtio: fix up max size checksMichael S. Tsirkin
Coverity reports that ARRAY_SIZE(elem->out_sg) (and all the others too) is wrong because elem->out_sg is a pointer. However, the check is not in the right place and the max_size argument of virtqueue_map_iovec can be removed. The check on in_num/out_num should be moved to qemu_get_virtqueue_element instead, before the call to virtqueue_alloc_element. Cc: qemu-stable@nongnu.org Reported-by: Paolo Bonzini <pbonzini@redhat.com> Fixes: 3724650db07057333879484c8bc7d900b5c1bf8e ("virtio: introduce virtqueue_alloc_element") Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2017-01-18virtio-mmio: switch to linux headersMichael S. Tsirkin
Switch to virtio_mmio.h from Linux - will make it easier to implement virtio 1. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-01-18virtio: drop an obsolete commentMichael S. Tsirkin
virtio core has code to revert queue number to maximum on reset. Drop TODO to add that. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-01-18vhost_net: device IOTLB supportJason Wang
This patches implements Device IOTLB support for vhost kernel. This is done through: 1) switch to use dma helpers when map/unmap vrings from vhost codes 2) introduce a set of VhostOps to: - setting up device IOTLB request callback - processing device IOTLB request - processing device IOTLB invalidation 2) kernel support for Device IOTLB API: - allow vhost-net to query the IOMMU IOTLB entry through eventfd - enable the ability for qemu to update a specified mapping of vhost - through ioctl. - enable the ability to invalidate a specified range of iova for the device IOTLB of vhost through ioctl. In x86/intel_iommu case this is triggered through iommu memory region notifier from device IOTLB invalidation descriptor processing routine. With all the above, kernel vhost_net can co-operate with userspace IOMMU. For vhost-user, the support could be easily done on top by implementing the VhostOps. Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-01-18virtio: disable notifications again after poll succeededStefan Hajnoczi
While AioContext is in polling mode virtqueue notifications are not necessary. Some device virtqueue handlers enable notifications. Make sure they stay disabled to avoid unnecessary vmexits. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Richard Henderson <rth@twiddle.net> Tested-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-01-18Revert "virtio: turn vq->notification into a nested counter"Stefan Hajnoczi
This reverts commit aff8fd18f1786fc5af259a9bc0077727222f51ca. Both virtio-net and virtio-crypto do not balance virtio_queue_set_notification() enable and disable calls. This makes the notifications_disabled counter unreliable and Doug Goldstein reported the following assertion failure: #3 0x00007ffff44d1c62 in __GI___assert_fail ( assertion=assertion@entry=0x555555ae8e8a "vq->notification_disabled > 0", file=file@entry=0x555555ae89c0 "/home/doug/work/qemu/hw/virtio/virtio.c", line=line@entry=215, function=function@entry=0x555555ae9630 <__PRETTY_FUNCTION__.43707> "virtio_queue_set_notification") at assert.c:101 #4 0x00005555557f25d6 in virtio_queue_set_notification (vq=0x55555666aa90, enable=enable@entry=1) at /home/doug/work/qemu/hw/virtio/virtio.c:215 #5 0x00005555557dc311 in virtio_net_has_buffers (q=<optimized out>, q=<optimized out>, bufsize=102) at /home/doug/work/qemu/hw/net/virtio-net.c:1008 #6 virtio_net_receive (nc=<optimized out>, buf=0x555557386b88 "", size=102) at /home/doug/work/qemu/hw/net/virtio-net.c:1148 #7 0x00005555559cad33 in nc_sendv_compat (flags=<optimized out>, iovcnt=1, iov=0x7fffead746d0, nc=0x55555788b340) at net/net.c:705 #8 qemu_deliver_packet_iov (sender=<optimized out>, flags=<optimized out>, iov=0x7fffead746d0, iovcnt=1, opaque=0x55555788b340) at net/net.c:732 #9 0x00005555559cd929 in qemu_net_queue_deliver (size=<optimized out>, data=<optimized out>, flags=<optimized out>, sender=<optimized out>, queue=0x55555788b550) at net/queue.c:164 #10 qemu_net_queue_flush (queue=0x55555788b550) at net/queue.c:261 This patch is safe to revert since it's just an optimization for virtqueue polling. The next patch will improve the situation again without resorting to nesting. Reported-by: Doug Goldstein <cardoe@cardoe.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Richard Henderson <rth@twiddle.net> Tested-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-01-08 14:16:48 +0000