aboutsummaryrefslogtreecommitdiff
path: root/hw/virtio/virtio-mmio.c
AgeCommit message (Collapse)Author
2020-01-24qdev: set properties with device_class_set_props()Marc-André Lureau
The following patch will need to handle properties registration during class_init time. Let's use a device_class_set_props() setter. spatch --macro-file scripts/cocci-macro-file.h --sp-file ./scripts/coccinelle/qdev-set-props.cocci --keep-comments --in-place --dir . @@ typedef DeviceClass; DeviceClass *d; expression val; @@ - d->props = val + device_class_set_props(d, val) Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20200110153039.1379601-20-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-06virtio-mmio: update queue size on guest writeDenis Plotnikov
Some guests read back queue size after writing it. Always update the on size write otherwise they might be confused. Cc: qemu-stable@nongnu.org Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com> Message-Id: <20191224081446.17003-1-dplotnikov@virtuozzo.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-01-05virtio-mmio: Clear v2 transport state on soft resetJean-Philippe Brucker
At the moment when the guest writes a status of 0, we only reset the virtio core state but not the virtio-mmio state. The virtio-mmio specification says (v1.1 cs01, 4.2.2.1 Device Requirements: MMIO Device Register Layout): Upon reset, the device MUST clear all bits in InterruptStatus and ready bits in the QueueReady register for all queues in the device. The core already takes care of InterruptStatus by clearing isr, but we still need to clear QueueReady. It would be tempting to clean all registers, but since the specification doesn't say anything more, guests could rely on the registers keeping their state across reset. Linux for example, relies on this for GuestPageSize in the legacy MMIO tranport. Fixes: 44e687a4d9ab ("virtio-mmio: implement modern (v2) personality (virtio-1)") Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Message-Id: <20191213095410.1516119-1-jean-philippe@linaro.org> Reviewed-by: Sergio Lopez <slp@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-10-22hw/virtio: Factorize virtio-mmio headersSergio Lopez
Put QOM and main struct definition in a separate header file, so it can be accessed from other components. Signed-off-by: Sergio Lopez <slp@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2019-09-16virtio-mmio: implement modern (v2) personality (virtio-1)Sergio Lopez
Implement the modern (v2) personality, according to the VirtIO 1.0 specification. Support for v2 among guests is not as widespread as it'd be desirable. While the Linux driver has had it for a while, support is missing, at least, from Tianocore EDK II, NetBSD and FreeBSD. For this reason, the v2 personality is disabled, keeping the legacy behavior as default. Machine types willing to use v2, can enable it using MachineClass's compat_props. Signed-off-by: Sergio Lopez <slp@redhat.com> Message-Id: <20190913120559.40835-1-slp@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-08-16Include hw/qdev-properties.h lessMarkus Armbruster
In my "build everything" tree, changing hw/qdev-properties.h triggers a recompile of some 2700 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). Many places including hw/qdev-properties.h (directly or via hw/qdev.h) actually need only hw/qdev-core.h. Include hw/qdev-core.h there instead. hw/qdev.h is actually pointless: all it does is include hw/qdev-core.h and hw/qdev-properties.h, which in turn includes hw/qdev-core.h. Replace the remaining uses of hw/qdev.h by hw/qdev-properties.h. While there, delete a few superfluous inclusions of hw/qdev-core.h. Touching hw/qdev-properties.h now recompiles some 1200 objects. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Daniel P. Berrangé" <berrange@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20190812052359.30071-22-armbru@redhat.com>
2019-08-16Include hw/irq.h a lot lessMarkus Armbruster
In my "build everything" tree, changing hw/irq.h triggers a recompile of some 5400 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). hw/hw.h supposedly includes it for convenience. Several other headers include it just to get qemu_irq and.or qemu_irq_handler. Move the qemu_irq and qemu_irq_handler typedefs from hw/irq.h to qemu/typedefs.h, and then include hw/irq.h only where it's still needed. Touching it now recompiles only some 500 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190812052359.30071-13-armbru@redhat.com>
2019-08-16Include migration/qemu-file-types.h a lot lessMarkus Armbruster
In my "build everything" tree, changing migration/qemu-file-types.h triggers a recompile of some 2600 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). The culprit is again hw/hw.h, which supposedly includes it for convenience. Include migration/qemu-file-types.h only where it's needed. Touching it now recompiles less than 200 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190812052359.30071-10-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-06-12Include qemu/module.h where needed, drop it from qemu-common.hMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-4-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for hw/usb/dev-hub.c hw/misc/exynos4210_rng.c hw/misc/bcm2835_rng.c hw/misc/aspeed_scu.c hw/display/virtio-vga.c hw/arm/stm32f205_soc.c; ui/cocoa.m fixed up]
2019-05-22hw/virtio/virtio-mmio: Convert DPRINTF to trace and logBoxuan Li
Use traces for debug message and qemu_log_mask for errors. Signed-off-by: Boxuan Li <liboxuan@connect.hku.hk> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Message-Id: <20190503154424.73933-1-liboxuan@connect.hku.hk> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2017-01-18virtio-mmio: switch to linux headersMichael S. Tsirkin
Switch to virtio_mmio.h from Linux - will make it easier to implement virtio 1. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-12-16virtio: avoid using guest_notifier_mask in vhost-user modeWei Huang
Because guest mask notifier cannot be used in vhost-user mode, a boolean flag "use_guest_notifier_mask" was added in commit 5669655aafd to disable the use of guest mask notifier under virtio-pci. However this flag wasn't checked in other virtio devices, such as virtio-mmio. In our tests, it caused assertion error under "vhost-user + virtio-mmio". This patch addresses this problem by adding a check before guest_notifier_mask is called. Signed-off-by: Wei Huang <wei@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-11-18virtio: access ISR atomicallyPaolo Bonzini
This will be needed once dataplane will be able to set it outside the big QEMU lock. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Tested-by: Farhan Ali <alifm@linux.vnet.ibm.com> Tested-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-10-30virtio: introduce virtio_device_ioeventfd_enabledPaolo Bonzini
This will be used to forbid iothread configuration when the proxy does not allow using ioeventfd. To simplify the implementation, change the direction of the ioeventfd_disabled callback too. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-10-30virtio: move ioeventfd_started flag to VirtioBusStatePaolo Bonzini
This simplifies the code and removes the ioeventfd_started and ioeventfd_set_started callback. The only difference is in how virtio-ccw handles an error---it doesn't disable ioeventfd forever anymore. It was the only backend to do so, and if desired this behavior should be implemented in virtio-bus.c. Instead of ioeventfd_started, the ioeventfd_assign callback now determines whether the virtio bus supports host notifiers. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-10-30virtio: move ioeventfd_disabled flag to VirtioBusStatePaolo Bonzini
This simplifies the code and removes the ioeventfd_set_disabled callback. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-07-14virtio-mmio: format transport base address in BusClass.get_dev_pathLaszlo Ersek
At the moment the following QEMU command line triggers an assertion failure (minimal reproducer by Cole): qemu-system-aarch64 \ -machine virt-2.6,accel=tcg \ -nodefaults \ -no-user-config \ -nographic -monitor stdio \ -device virtio-scsi-device,id=scsi0 \ -device virtio-scsi-device,id=scsi1 \ -drive file=foo.img,format=raw,if=none,id=d0 \ -device scsi-hd,bus=scsi0.0,drive=d0 \ -drive file=foo.img,format=raw,if=none,id=d1 \ -device scsi-hd,bus=scsi1.0,drive=d1 qemu-system-aarch64: migration/savevm.c:615: vmstate_register_with_alias_id: Assertion `!se->compat || se->instance_id == 0' failed. The reason is that the vmstate sections for the two scsi-hd devices are not uniquely identifiable by name. The direct parent buses of the scsi-hd devices -- scsi0.0 and scsi1.0 -- support the BusClass.get_dev_path member function. scsibus_get_dev_path() formats a device path prefix with the help of its topologically parent bus, and then appends the chan:id:lun triplet to it. For both scsi-hd devices, this triplet is 0:0:0. (Here we use "device path" in the QEMU migration sense, for vmstate section identification, not in the OFW or UEFI device path senses.) The virtio-scsi HBA is plugged into the virtio-mmio bus (implemented by the internal VirtIOMMIOProxy device). This bus class (TYPE_VIRTIO_MMIO_BUS) inherits, as its get_dev_path() member function, the virtio_bus_get_dev_path() method from its parent class (TYPE_VIRTIO_BUS). virtio_bus_get_dev_path() does not format any kind of device address on its own; "virtio addresses" are transport-specific. Therefore virtio_bus_get_dev_path() asks the topologically parent bus of the proxy object (implementing the specific virtio transport) to format the address of the proxy object. (For virtio-pci devices (where the proxy is an instance of VirtIOPCIProxy, plugged into a PCI bus), this ends up in pcibus_get_dev_path().) However, VirtIOMMIOProxy is usually (in practice: always) plugged into "main-system-bus", the singleton TYPE_SYSTEM_BUS object. This BusClass does not support formatting QEMU vmstate device paths at all (as SysBusDevice objects can have zero or more IO ports and zero or more MMIO regions). Hence the formatting request delegated from virtio_bus_get_dev_path() gets answered with NULL. The end result is that the two scsi-hd devices end up with the same device path "0:0:0", which triggers the assert. We can solve this by recognizing that virtio-mmio transports are distinguished from each other by their base addresses in MMIO address space. Implement virtio_mmio_bus_get_dev_path() as follows: (1) The virtio device whose devpath is to be formatted resides on a virtio-mmio bus that is implemented by a VirtIOMMIOProxy object. Ask the parent bus of VirtIOMMIOProxy to format the device path of VirtIOMMIOProxy, as a path prefix. (This is identical to what virtio_bus_get_dev_path() does.) (2) Append the base address of VirtIOMMIOProxy to the device path, such as: - virtio-mmio@000000000a003e00, - virtio-mmio@000000000a003c00. Given that these device paths are placed in the migration stream, step (2) above, if done unconditionally, would break migration. So make that step conditional on a new VirtIOMMIOProxy property, which is enabled for 2.7 machine types and later. Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Cole Robinson <crobinso@redhat.com> Cc: Dr. David Alan Gilbert <dgilbert@redhat.com> Cc: Kevin Zhao <kevin.zhao@linaro.org> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Tom Hanson <thomas.hanson@linaro.org> Reported-by: Kevin Zhao <kevin.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Laszlo Ersek <lersek@redhat.com> Message-id: 1467739394-28357-1-git-send-email-lersek@redhat.com Fixes: https://bugs.launchpad.net/qemu/+bug/1594239 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-24virtio-mmio: convert to ioeventfd callbacksCornelia Huck
Convert to the new interface. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-01-29virtio: Clean up includesPeter Maydell
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1453832250-766-15-git-send-email-peter.maydell@linaro.org
2015-06-10virtio: allow virtio-1 queue layoutCornelia Huck
For virtio-1 devices, we allow a more complex queue layout that doesn't require descriptor table and rings on a physically-contigous memory area: add virtio_queue_set_rings() to allow transports to set this up. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-01virtio-mmio: ioeventfd supportYing-Shiuan Pan
set_host_notifier and set_guest_notifiers supported by virtio-mmio now. Most code copied from virtio-pci. This makes it possible to use vhost-net with virtio-mmio, improving performance by about 30%. The kvm-arm does not yet support irqfd, need to fix the hard-coded part after kvm-arm gets irqfd support. Signed-off-by: Ying-Shiuan Pan <yingshiuan.pan@gmail.com> Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-05-31virtio: rename VIRTIO_PCI_QUEUE_MAX to VIRTIO_QUEUE_MAXJason Wang
VIRTIO_PCI_QUEUE_MAX is not only used for pci, so rename it be generic. Cc: Amit Shah <amit.shah@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-05-31virtio: move VIRTIO_F_NOTIFY_ON_EMPTY into coreCornelia Huck
Nearly all transports have been offering VIRTIO_F_NOTIFY_ON_EMPTY, s390-virtio being the exception. There's no reason why it shouldn't offer it as well, though (handling is done in core anyway), so let's move it to the common virtio features. While we're changing it anyway, fix the indentation for the DEFINE_VIRTIO_COMMON_FEATURES macro. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-05-31virtio: move host_featuresCornelia Huck
Move host_features from the individual transport proxies into the virtio device. Transports may continue to add feature bits during device plugging. This should it make easier to offer different sets of host features for virtio-1/transitional support. Tested-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-02-26virtio: feature bit manipulation helpersCornelia Huck
Add virtio_{add,clear}_feature helper functions for manipulating a feature bits variable. This has some benefits over open coding: - add check that the bit is in a sane range - make it obvious at a glance what is going on - have a central point to change when we want to extend feature bits Convert existing code manipulating features to use the new helpers. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-10-15virtio-mmio: Drop useless bus->allow_hotplug = 0Igor Mammedov
Bus by default is not hotpluggable. virtio-mmio-bus and its parent types do not set allow_hotplug anywhere explicitly, so remove not needed field access and wrapper along with it. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-07-06hw/virtio: enable common virtio feature for mmio deviceMing Lei
Both 'indirect_desc' and 'event_idx' are bus independent features, and they should be enabled for mmio devices too. On arm64 quad core VM(qemu-kvm), the patch can increase block I/O performance a lot with latest linux tree: - without the patch: 14K IOPS - with the patch: 34K IOPS fio script: [global] direct=1 bsrange=4k-4k timeout=10 numjobs=4 ioengine=libaio iodepth=64 filename=/dev/vdc group_reporting=1 [f1] rw=randread Cc: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Ming Lei <ming.lei@canonical.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-12-09virtio-bus: remove vdev fieldPaolo Bonzini
The vdev field is complicated to synchronize. Just access the BusState's list of children. Cc: qemu-stable@nongnu.org Acked-by: Andreas Faerber <afaerber@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-08-30qdev: Pass size to qbus_create_inplace()Andreas Färber
To be passed to object_initialize(). Since commit 39355c3826f5d9a2eb1ce3dc9b4cdd68893769d6 the argument is void*, so drop some superfluous (BusState *) casts or direct parent field usages. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-08-30virtio-mmio: Pass size to virtio_mmio_bus_new()Andreas Färber
To be passed to qbus_create_initialize(). Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-08-12hw/virtio/virtio-mmio: Make QueueNumMax read 0 for unavailable queuesPeter Maydell
The virtio-mmio spec says that QueueNumMax must read zero for queues which are unavailable; implement this, rather than always returning VIRTQUEUE_MAX_SIZE. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1374853288-9912-3-git-send-email-peter.maydell@linaro.org Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-29devices: Associate devices to their logical categoryMarcel Apfelbaum
The category will be used to sort the devices displayed in the command line help. Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com> Message-id: 1375107465-25767-4-git-send-email-marcel.a@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-19virtio: Implement MMIO based virtio transportPeter Maydell
Add support for the generic MMIO based virtio transport. This patch includes some fixes for bugs spotted by Ying-Shiuan Pan <yspan@itri.org.tw>. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Message-id: 1373977512-28932-6-git-send-email-peter.maydell@linaro.org [Fred changes: updated to new virtio-bus mechanisms] Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> [PMM changes: * fixed trivial makefile conflict * removed unused int_enable * host_features doesn't need migrating * reset guest accessible state in the reset function * minor style fixes like extra blank lines * RAZ/WI if there's no backend * made transport size 0x200, in line with kvmtool * set has_variable_vring_alignment ]
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-21 14:28:34 +0000