aboutsummaryrefslogtreecommitdiff
path: root/hw/virtio/virtio-balloon.c
AgeCommit message (Collapse)Author
2016-05-12qapi: Split visit_end_struct() into piecesEric Blake
As mentioned in previous patches, we want to call visit_end_struct() functions unconditionally, so that visitors can release resources tied up since the matching visit_start_struct() without also having to worry about error priority if more than one error occurs. Even though error_propagate() can be safely used to ignore a second error during cleanup caused by a first error, it is simpler if the cleanup cannot set an error. So, split out the error checking portion (basically, input visitors checking for unvisited keys) into a new function visit_check_struct(), which can be safely skipped if any earlier errors are encountered, and leave the cleanup portion (which never fails, but must be called unconditionally if visit_start_struct() succeeded) in visit_end_struct(). Generated code in qapi-visit.c has diffs resembling: |@@ -59,10 +59,12 @@ void visit_type_ACPIOSTInfo(Visitor *v, | goto out_obj; | } | visit_type_ACPIOSTInfo_members(v, obj, &err); |- error_propagate(errp, err); |- err = NULL; |+ if (err) { |+ goto out_obj; |+ } |+ visit_check_struct(v, &err); | out_obj: |- visit_end_struct(v, &err); |+ visit_end_struct(v); | out: and in qapi-event.c: @@ -47,7 +47,10 @@ void qapi_event_send_acpi_device_ost(ACP | goto out; | } | visit_type_q_obj_ACPI_DEVICE_OST_arg_members(v, &param, &err); |- visit_end_struct(v, err ? NULL : &err); |+ if (!err) { |+ visit_check_struct(v, &err); |+ } |+ visit_end_struct(v); | if (err) { | goto out; Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1461879932-9020-20-git-send-email-eblake@redhat.com> [Conflict with a doc fixup resolved] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-04-14hw/virtio/balloon: Replace TARGET_PAGE_SIZE with BALLOON_PAGE_SIZEThomas Huth
The balloon code currently calls madvise() with TARGET_PAGE_SIZE as length parameter. Since the virtio-balloon protocol is always based on 4k pages, no matter what the host and guest are using as page size, this could cause problems: If TARGET_PAGE_SIZE is bigger than 4k, the madvise call also destroys the 4k areas after the current one - which might be wrong since the guest did not want free that area yet (in case the guest used as smaller MMU page size than the hard-coded TARGET_PAGE_SIZE). So to fix this issue, introduce a proper define called BALLOON_PAGE_SIZE (which is 4096) to use this as the size parameter for the madvise() call instead. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-04-07virtio-balloon: reset the statistic timer to load devicePavel Butsykin
If before loading snapshot we had set the timer of statistics, then after applying snapshot the expiry time would be irrelevant for the restored state of the virtual clocks. A simple fix is just to restart the timer after loading snapshot. For the user it may look like a long delay of statistics update after switch to the snapshot. Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com> Reviewed-by: Roman Kagan <rkagan@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-03-11virtio-balloon: add 'available' counterDenis V. Lunev
The patch for the kernel part is in linux-next already: commit ac88e7c908b920866e529862f2b2f0129b254ab2 Author: Igor Redko <redkoi@virtuozzo.com> Date: Thu Feb 18 09:23:01 2016 +1100 virtio_balloon: export 'available' memory to balloon statistics Add a new field, VIRTIO_BALLOON_S_AVAIL, to virtio_balloon memory statistics protocol, corresponding to 'Available' in /proc/meminfo. Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Igor Redko <redkoi@virtuozzo.com> CC: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-03-11balloon: fix segfault and harden the stats queueLadi Prosek
The segfault here is triggered by the driver notifying the stats queue twice after adding a buffer to it. This effectively resets stats_vq_elem back to NULL and QEMU crashes on the next stats timer tick in balloon_stats_poll_cb. This is a regression introduced in 51b19ebe4320f3dc, although admittedly the device assumed too much about the stats queue protocol even before that commit. This commit adds a few more checks and ensures that the one stats buffer gets deallocated on device reset. Cc: qemu-stable@nongnu.org Signed-off-by: Ladi Prosek <lprosek@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-02-25balloon: Use only 'pc-dimm' type dimm for ballooningVladimir Sementsov-Ogievskiy
For now there are only two dimm's: pc-dimm and nvdimm. This patch is actually needed to disable ballooning on nvdimm. But, to avoid future bugs, instead of disallowing nvdimm, we allow only pc-dimm. So, if someone adds new dimm which should be balloon-able, then this ability should be explicitly specified here. Why ballooning for nvdimm should be disabled for now: NVDIMM for now is planned to use as a backing store for DAX filesystem in the guest and thus this memory is excluded from guest memory management and LRUs. In this case libvirt running QEMU along with configured balloon almost immediately inflates balloon and effectively kill the guest as qemu counts nvdimm as part of the ram. Counting dimm devices as part of the ram for ballooning was started from commit 463756d03: virtio-balloon: Fix balloon not working correctly when hotplug memory Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-02-25virtio-balloon: rewrite get_current_ram_size()Vladimir Sementsov-Ogievskiy
Use pc_dimm_built_list() instead of qmp_pc_dimm_device_list() Actually, Qapi is not related to this internal helper. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-02-23move get_current_ram_size to virtio-balloon.cVladimir Sementsov-Ogievskiy
get_current_ram_size() is used only in virtio-balloon.c This patch moves it into virtio-balloon and make it static, to allow some balloon-specific tuning. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-02-08qapi: Drop unused 'kind' for struct/enum visitEric Blake
visit_start_struct() and visit_type_enum() had a 'kind' argument that was usually set to either the stringized version of the corresponding qapi type name, or to NULL (although some clients didn't even get that right). But nothing ever used the argument. It's even hard to argue that it would be useful in a debugger, as a stack backtrace also tells which type is being visited. Therefore, drop the 'kind' argument as dead. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-22-git-send-email-eblake@redhat.com> [Harmless rebase mistake cleaned up] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-02-08qom: Swap 'name' next to visitor in ObjectPropertyAccessorEric Blake
Similar to the previous patch, it's nice to have all functions in the tree that involve a visitor and a name for conversion to or from QAPI to consistently stick the 'name' parameter next to the Visitor parameter. Done by manually changing include/qom/object.h and qom/object.c, then running this Coccinelle script and touching up the fallout (Coccinelle insisted on adding some trailing whitespace). @ rule1 @ identifier fn; typedef Object, Visitor, Error; identifier obj, v, opaque, name, errp; @@ void fn - (Object *obj, Visitor *v, void *opaque, const char *name, + (Object *obj, Visitor *v, const char *name, void *opaque, Error **errp) { ... } @@ identifier rule1.fn; expression obj, v, opaque, name, errp; @@ fn(obj, v, - opaque, name, + name, opaque, errp) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-20-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-02-08qapi: Swap visit_* arguments for consistent 'name' placementEric Blake
JSON uses "name":value, but many of our visitor interfaces were called with visit_type_FOO(v, &value, name, errp). This can be a bit confusing to have to mentally swap the parameter order to match JSON order. It's particularly bad for visit_start_struct(), where the 'name' parameter is smack in the middle of the otherwise-related group of 'obj, kind, size' parameters! It's time to do a global swap of the parameter ordering, so that the 'name' parameter is always immediately after the Visitor argument. Additional reason in favor of the swap: the existing include/qjson.h prefers listing 'name' first in json_prop_*(), and I have plans to unify that file with the qapi visitors; listing 'name' first in qapi will minimize churn to the (admittedly few) qjson.h clients. Later patches will then fix docs, object.h, visitor-impl.h, and those clients to match. Done by first patching scripts/qapi*.py by hand to make generated files do what I want, then by running the following Coccinelle script to affect the rest of the code base: $ spatch --sp-file script `git grep -l '\bvisit_' -- '**/*.[ch]'` I then had to apply some touchups (Coccinelle insisted on TAB indentation in visitor.h, and botched the signature of visit_type_enum() by rewriting 'const char *const strings[]' to the syntactically invalid 'const char*const[] strings'). The movement of parameters is sufficient to provoke compiler errors if any callers were missed. // Part 1: Swap declaration order @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_start_struct -(TV v, TObj OBJ, T1 ARG1, const char *name, T2 ARG2, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type bool, TV, T1; identifier ARG1; @@ bool visit_optional -(TV v, T1 ARG1, const char *name) +(TV v, const char *name, T1 ARG1) { ... } @@ type TV, TErr, TObj, T1; identifier OBJ, ARG1; @@ void visit_get_next_type -(TV v, TObj OBJ, T1 ARG1, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, TErr errp) { ... } @@ type TV, TErr, TObj, T1, T2; identifier OBJ, ARG1, ARG2; @@ void visit_type_enum -(TV v, TObj OBJ, T1 ARG1, T2 ARG2, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, T1 ARG1, T2 ARG2, TErr errp) { ... } @@ type TV, TErr, TObj; identifier OBJ; identifier VISIT_TYPE =~ "^visit_type_"; @@ void VISIT_TYPE -(TV v, TObj OBJ, const char *name, TErr errp) +(TV v, const char *name, TObj OBJ, TErr errp) { ... } // Part 2: swap caller order @@ expression V, NAME, OBJ, ARG1, ARG2, ERR; identifier VISIT_TYPE =~ "^visit_type_"; @@ ( -visit_start_struct(V, OBJ, ARG1, NAME, ARG2, ERR) +visit_start_struct(V, NAME, OBJ, ARG1, ARG2, ERR) | -visit_optional(V, ARG1, NAME) +visit_optional(V, NAME, ARG1) | -visit_get_next_type(V, OBJ, ARG1, NAME, ERR) +visit_get_next_type(V, NAME, OBJ, ARG1, ERR) | -visit_type_enum(V, OBJ, ARG1, ARG2, NAME, ERR) +visit_type_enum(V, NAME, OBJ, ARG1, ARG2, ERR) | -VISIT_TYPE(V, OBJ, NAME, ERR) +VISIT_TYPE(V, NAME, OBJ, ERR) ) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-19-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-02-08qom: Use typedef for VisitorEric Blake
No need to repeat 'struct Visitor' when we already have it in typedefs.h. Omitting the redundant 'struct' also makes a later patch easier to search for all object property callbacks that are associated with a Visitor. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1454075341-13658-18-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-02-08balloon: Improve use of qapi visitorEric Blake
Rework the control flow of balloon_stats_get_all() to make it easier for a later patch to split visit_end_struct(). Also switch to the uint64 visitor to match the data type. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <1454075341-13658-10-git-send-email-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2016-02-06virtio: move allocation to virtqueue_pop/vring_popPaolo Bonzini
The return code of virtqueue_pop/vring_pop is unused except to check for errors or 0. We can thus easily move allocation inside the functions and just return a pointer to the VirtQueueElement. The advantage is that we will be able to allocate only the space that is needed for the actual size of the s/g list instead of the full VIRTQUEUE_MAX_SIZE items. Currently VirtQueueElement takes about 48K of memory, and this kind of allocation puts a lot of stress on malloc. By cutting the size by two or three orders of magnitude, malloc can use much more efficient algorithms. The patch is pretty large, but changes to each device are testable more or less independently. Splitting it would mostly add churn. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-01-29virtio: Clean up includesPeter Maydell
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1453832250-766-15-git-send-email-peter.maydell@linaro.org
2015-11-10Inhibit ballooning during postcopyDr. David Alan Gilbert
Postcopy detects accesses to pages that haven't been transferred yet using userfaultfd, and it causes exceptions on pages that are 'not present'. Ballooning also causes pages to be marked as 'not present' when the guest inflates the balloon. Potentially a balloon could be inflated to discard pages that are currently inflight during postcopy and that may be arriving at about the same time. To avoid this confusion, disable ballooning during postcopy. When disabled we drop balloon requests from the guest. Since ballooning is generally initiated by the host, the management system should avoid initiating any balloon instructions to the guest during migration, although it's not possible to know how long it would take a guest to process a request made prior to the start of migration. Guest initiated ballooning will not know if it's really freed a page of host memory or not. Queueing the requests until after migration would be nice, but is non-trivial, since the set of inflate/deflate requests have to be compared with the state of the page to know what the final outcome is allowed to be. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-09-10virtio: avoid leading underscores for helpersCornelia Huck
Commit ef546f1275f6563e8934dd5e338d29d9f9909ca6 ("virtio: add feature checking helpers") introduced a helper __virtio_has_feature. We don't want to use reserved identifiers, though, so let's rename __virtio_has_feature to virtio_has_feature and virtio_has_feature to virtio_vdev_has_feature. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-07-27virtio: get_features() can failJason Wang
Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-23balloon: add a feature bit to let Guest OS deflate balloon on oomDenis V. Lunev
Excessive virtio_balloon inflation can cause invocation of OOM-killer, when Linux is under severe memory pressure. Various mechanisms are responsible for correct virtio_balloon memory management. Nevertheless it is often the case that these control tools does not have enough time to react on fast changing memory load. As a result OS runs out of memory and invokes OOM-killer. The balancing of memory by use of the virtio balloon should not cause the termination of processes while there are pages in the balloon. Now there is no way for virtio balloon driver to free memory at the last moment before some process get killed by OOM-killer. This does not provide a security breach as balloon itself is running inside Guest OS and is working in the cooperation with the host. Thus some improvements from Guest side should be considered as normal. To solve the problem, introduce a virtio_balloon callback which is expected to be called from the oom notifier call chain in out_of_memory() function. If virtio balloon could release some memory, it will make the system return and retry the allocation that forced the out of memory killer to run. This behavior should be enabled if and only if appropriate feature bit is set on the device. It is off by default. This functionality was recently merged into vanilla Linux. commit 5a10b7dbf904bfe01bb9fcc6298f7df09eed77d5 Author: Raushaniya Maksudova <rmaksudova@parallels.com> Date: Mon Nov 10 09:36:29 2014 +1030 This patch adds respective control bits into QEMU. It introduces deflate-on-oom option for balloon device which does the trick. Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Raushaniya Maksudova <rmaksudova@parallels.com> CC: Anthony Liguori <aliguori@amazon.com> CC: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: James Bottomley <JBottomley@Odin.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-06-10virtio-balloon: switch to virtio_add_featureCornelia Huck
This was missed during the conversion of feature bit manipulation. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-01virtio: make features 64bit wideGerd Hoffmann
Make features 64bit wide everywhere. On migration a full 64bit guest_features field is sent if one of the high bits is set, in addition to the lower 32bit guest_features field which must stay for compatibility reasons. That way we send the lower 32 feature bits twice, but the code is simpler because we don't have to split and compose the 64bit features into two 32bit fields. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-05-31hw/virtio/virtio-balloon: move adding property to virtio_balloon_instance_initShannon Zhao
This is in preparation for using alias property in virtio-balloon-pci and virtio-balloon-ccw. Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2015-04-24balloon: improve error msg when adding second deviceLuiz Capitulino
A VM supports only one balloon device, but due to several changes in infrastructure the error message got messed up when trying to add a second device. Fix it. Before this fix Command-line: qemu-qmp: -device virtio-balloon-pci,id=balloon0: Another balloon device already registered qemu-qmp: -device virtio-balloon-pci,id=balloon0: Adding balloon handler failed qemu-qmp: -device virtio-balloon-pci,id=balloon0: Device 'virtio-balloon-pci' could not be initialized HMP: Another balloon device already registered Adding balloon handler failed Device 'virtio-balloon-pci' could not be initialized QMP: { "execute": "device_add", "arguments": { "driver": "virtio-balloon-pci", "id": "balloon0" } } { "error": { "class": "GenericError", "desc": "Adding balloon handler failed" } } After this fix Command-line: qemu-qmp: -device virtio-balloon-pci,id=balloon0: Only one balloon device is supported qemu-qmp: -device virtio-balloon-pci,id=balloon0: Device 'virtio-balloon-pci' could not be initialized HMP: (qemu) device_add virtio-balloon-pci,id=balloon0 Only one balloon device is supported Device 'virtio-balloon-pci' could not be initialized (qemu) QMP: { "execute": "device_add", "arguments": { "driver": "virtio-balloon-pci", "id": "balloon0" } } { "error": { "class": "GenericError", "desc": "Only one balloon device is supported" } } Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2015-03-09Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
pci, pc, virtio fixes and cleanups A bunch of fixes all over the place. All of ACPI refactoring has been merged. Legacy pci commands have been dropped. virtio header cleanup initial patches from virtio-1.0 branch Signed-off-by: Michael S. Tsirkin <mst@redhat.com> * remotes/mst/tags/for_upstream: (130 commits) acpi: drop unused code aml-build: comment fix acpi-build: fix typo in comment acpi: update generated files vhost user:support vhost user nic for non msi guests aml-build: fix build for glib < 2.22 acpi: update generated files Makefile.target: binary depends on config-devices acpi-test-data: update after pci rewrite acpi, mem-hotplug: use PC_DIMM_SLOT_PROP in acpi_memory_plug_cb(). pci-hotplug-old: Has been dead for five major releases, bury pci: Give a few helpers internal linkage acpi: make build_*() routines static to aml-build.c pc: acpi: remove not used anymore ssdt-[misc|pcihp].hex.generated blobs pc: acpi-build: drop template patching and create PCI bus tree dynamically tests: ACPI: update pc/SSDT.bridge due to new alg of PCI tree creation pc: acpi-build: simplify PCI bus tree generation tests: add ACPI blobs for qemu with bridge cases tests: bios-tables-test: add support for testing bridges tests: ACPI test blobs update due to PCI0._CRS changes ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Conflicts: hw/pci/pci-hotplug-old.c
2015-03-04virtio-balloon: Add some trace eventszhanghailiang
Add some trace events for easier debugging Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-03-04virtio-balloon: Fix balloon not working correctly when hotplug memoryzhanghailiang
When do memory balloon, it takes the 'ram_size' as the VM's current ram size, But 'ram_size' is the startup configured ram size, it does not take into account the hotplugged memory. As a result, the balloon result will be confused. Steps to reproduce: (1)Start VM: qemu -m size=1024,slots=4,maxmem=8G (2)In VM: #free -m : 1024M (3)qmp balloon 512M (4)In VM: #free -m : 512M (5)hotplug pc-dimm 1G (6)In VM: #free -m : 1512M (7)qmp balloon 256M (8)In VM: #free -m :1256M We expect the VM's available ram size to be 256M after 'qmp balloon 256M' command, but VM's real available ram size is 1256M. For "qmp balloon" is not performance critical code, we use function 'get_current_ram_size' to get VM's current ram size. Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-02-26virtio: add feature checking helpersCornelia Huck
Add a helper function for checking whether a bit is set in the guest features for a vdev as well as one that works on a feature bit set. Convert code that open-coded this: It cleans up the code and makes it easier to extend the guest feature bits. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-10-23virtio-balloon: Tweak recent fix for integer overflowMarkus Armbruster
Commit 1f9296b avoids "other kinds of overflow" by limiting the polling interval to UINT_MAX. The computations to protect are done in 64 bits. This is indeed safe when unsigned is 32 bits, as it commonly is. It isn't when unsigned is 64 bits. Purely theoretical; I'm not aware of such a system. Limit it to UINT32_MAX instead. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-09-26virtio-balloon: fix integer overflow in memory stats featureLuiz Capitulino
When a QMP client changes the polling interval time by setting the guest-stats-polling-interval property, the interval value is stored and manipulated as an int64_t variable. However, the balloon_stats_change_timer() function, which is used to set the actual timer with the interval value, takes an int instead, causing an overflow for big interval values. This commit fix this bug by changing balloon_stats_change_timer() to take an int64_t and also it limits the polling interval value to UINT_MAX to avoid other kinds of overflow. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
2014-06-29virtio-balloon: use virtio wrappers to access page frame numbersRusty Russell
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> [ pass VirtIODevice * to memory accessors, Greg Kurz <gkurz@linux.vnet.ibm.com> ] Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Reviewed-by: Alexander Graf <agraf@suse.de> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-29virtio-balloon: implement per-device migration callsGreg Kurz
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Reviewed-by: Alexander Graf <agraf@suse.de> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-29virtio: introduce device specific migration callsGreg Kurz
In order to migrate virtio subsections, they should be streamed after the device itself. We need the device specific code to be called from the common migration code to achieve this. This patch introduces load and save methods for this purpose. Suggested-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Reviewed-by: Alexander Graf <agraf@suse.de> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-23qapi event: convert BALLOON_CHANGEWenchao Xia
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-05-25virtio-balloon: return empty data when no stats are availableJán Tomko
If the guest hasn't updated the stats yet, instead of returning an error, return '-1' for the stats and '0' as 'last-update'. This lets applications ignore this without parsing the error message. Related libvirt patch and discussion: https://www.redhat.com/archives/libvir-list/2014-May/msg00460.html Tested against current upstream libvirt - stat reporting works and it no longer logs errors when the stats are queried on domain startup. (Note: libvirt doesn't use the last-update field for anything yet) Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-05-15qapi: Replace uncommon use of the error API by the common oneMarkus Armbruster
We commonly use the error API like this: err = NULL; foo(..., &err); if (err) { goto out; } bar(..., &err); Every error source is checked separately. The second function is only called when the first one succeeds. Both functions are free to pass their argument to error_set(). Because error_set() asserts no error has been set, this effectively means they must not be called with an error set. The qapi-generated code uses the error API differently: // *errp was initialized to NULL somewhere up the call chain frob(..., errp); gnat(..., errp); Errors accumulate in *errp: first error wins, subsequent errors get dropped. To make this work, the second function does nothing when called with an error set. Requires non-null errp, or else the second function can't see the first one fail. This usage has also bled into visitor tests, and two device model object property getters rtc_get_date() and balloon_stats_get_all(). With the "accumulate" technique, you need fewer error checks in callers, and buy that with an error check in every callee. Can be nice. However, mixing the two techniques is confusing. You can't use the "accumulate" technique with functions designed for the "check separately" technique. You can use the "check separately" technique with functions designed for the "accumulate" technique, but then error_set() can't catch you setting an error more than once. Standardize on the "check separately" technique for now, because it's overwhelmingly prevalent. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-05-15hw: Don't call visit_end_struct() after visit_start_struct() failsMarkus Armbruster
When visit_start_struct() fails, visit_end_struct() must not be called. rtc_get_date() and balloon_stats_all() call it anyway. As far as I can tell, they're only used with the string output visitor, which doesn't care. Fix them anyway. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-05-05qom: Clean up fragile use of error_is_set() in set() methodsMarkus Armbruster
Using error_is_set(ERRP) to find out whether a function failed is either wrong, fragile, or unnecessarily opaque. It's wrong when ERRP may be null, because errors go undetected when it is. It's fragile when proving ERRP non-null involves a non-local argument. Else, it's unnecessarily opaque (see commit 84d18f0). I guess the error_is_set(errp) in the ObjectProperty set() methods are merely fragile right now, because I can't find a call chain that passes a null errp argument. Make the code more robust and more obviously correct: receive the error in a local variable, then propagate it through the parameter. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-01-15virtio-balloon: don't hardcode config size valueLuiz Capitulino
Use sizeof(struct virtio_balloon_config) instead. Signed-off-by: Luiz capitulino <lcapitulino@redhat.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-12-09virtio: Convert exit to unrealizeAndreas Färber
Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-12-09virtio-balloon: Convert to QOM realizeAndreas Färber
Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-12-09virtio-balloon: QOM realize preparationsAndreas Färber
Rename qdev -> dev since that's what realize's argument is called by convention. No need to keep more "qdev" around than necessary. Avoid duplicate VIRTIO_DEVICE() cast. Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-12-09virtio-balloon: switch exit callback to VirtioDeviceClassPaolo Bonzini
This ensures hot-unplug is handled properly by the proxy, and avoids leaking bus_name which is freed by virtio_device_exit. Cc: qemu-stable@nongnu.org Acked-by: Andreas Faerber <afaerber@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-08-22aio / timers: Switch entire codebase to the new timer APIAlex Bligh
This is an autogenerated patch using scripts/switch-timer-api. Switch the entire code base to using the new timer API. Note this patch may introduce some line length issues. Signed-off-by: Alex Bligh <alex@alex.org.uk> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-07-29devices: Associate devices to their logical categoryMarcel Apfelbaum
The category will be used to sort the devices displayed in the command line help. Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com> Message-id: 1375107465-25767-4-git-send-email-marcel.a@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-27misc: Fix new typos in comments and stringsStefan Weil
All these typos were found by codespell. sould -> should emperical -> empirical intialization -> initialization successfuly -> successfully gaurantee -> guarantee Fix also another error (before before) in the same context. Signed-off-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-07-04memory: add ref/unref callsPaolo Bonzini
Add ref/unref calls at the following places: - places where memory regions are stashed by a listener and used outside the BQL (including in Xen or KVM). - memory_region_find callsites - creation of aliases and containers (only the aliased/contained region gets a reference to avoid loops) - around calls to del_subregion/add_subregion, where the region could disappear after the first call Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-06-20memory: make section size a 128-bit integerPaolo Bonzini
So far, the size of all regions passed to listeners could fit in 64 bits, because artificial regions (containers and aliases) are eliminated by the memory core, leaving only device regions which have reasonable sizes An IOMMU however cannot be eliminated by the memory core, and may have an artificial size, hence we may need 65 bits to represent its size. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-24virtio: cleanup: init and exit function.KONRAD Frederic
This clean the init and the exit functions and rename virtio_common_cleanup to virtio_cleanup. Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Message-id: 1366791683-5350-7-git-send-email-fred.konrad@greensocs.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-24virtio: remove the function pointer.KONRAD Frederic
This remove the function pointer in VirtIODevice, and use only VirtioDeviceClass function pointer. Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Message-id: 1366791683-5350-5-git-send-email-fred.konrad@greensocs.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-19virtio-balloon: fix integer overflow in BALLOON_CHANGE QMP eventLuiz Capitulino
Because dev->actual is uint32_t, the expression 'dev->actual << VIRTIO_BALLOON_PFN_SHIFT' is truncated to 32 bits. This overflows when dev->actual >= 1048576. To reproduce: 1. Start a VM with a QMP socket and 5G of RAM 2. Connect to the QMP socket, negotiate capabilities and issue: { "execute":"balloon", "arguments": { "value": 1073741824 } } 3. Watch for BALLOON_CHANGE QMP events, the last one will incorretly be: { "timestamp": { "seconds": 1366228965, "microseconds": 245466 }, "event": "BALLOON_CHANGE", "data": { "actual": 5368709120 } } To fix it this commit casts it to ram_addr_t, which is ram_size's type. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-28 21:17:35 +0000