aboutsummaryrefslogtreecommitdiff
path: root/hw/virtio/vhost.c
AgeCommit message (Collapse)Author
2015-11-26Revert "vhost: send SET_VRING_ENABLE at start/stop"Michael S. Tsirkin
This reverts commit 3a12f32229a046f4d4ab0a3a52fb01d2d5a1ab76. In case of live migration several queues can be enabled and not only the first one. So informing backend that only the first queue is enabled is wrong. Reported-by: Thibaut Collet <thibaut.collet@6wind.com> Cc: Yuanhan Liu <yuanhan.liu@linux.intel.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
2015-11-12vhost: send SET_VRING_ENABLE at start/stopYuanhan Liu
Send SET_VRING_ENABLE at start/stop, to give the backend an explicit sign of our state. Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-22vhost: set the correct queue index in case of migration with multiqueueThibaut Collet
When a live migration is started the log address to mark dirty pages is provided to the vhost backend through the vhost_dev_set_log function. This function is called for each queue pairs but the queue index is wrongly set: always set to the first queue pair. Then vhost backend lost descriptor addresses of the queue pairs greater than 1 and behaviour of the vhost backend is unpredictable. The queue index is computed by taking account of the vq_index (to retrieve the queue pair index) and calling the vhost_get_vq_index method of the backend. Signed-off-by: Thibaut Collet <thibaut.collet@6wind.com> Cc: qemu-stable@nongnu.org Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-22vhost: add migration block if memfd failedMarc-André Lureau
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Thibaut Collet <thibaut.collet@6wind.com>
2015-10-22vhost: use a function for each callMarc-André Lureau
Replace the generic vhost_call() by specific functions for each function call to help with type safety and changing arguments. While doing this, I found that "unsigned long long" and "uint64_t" were used interchangeably and causing compilation warnings, using uint64_t instead, as the vhost & protocol specifies. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> [Fix enum usage and MQ - Thibaut Collet] Signed-off-by: Thibaut Collet <thibaut.collet@6wind.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Thibaut Collet <thibaut.collet@6wind.com>
2015-10-22vhost-user: add a migration blockerMarc-André Lureau
If VHOST_USER_PROTOCOL_F_LOG_SHMFD is not announced, block vhost-user migration. The blocker is removed in vhost_dev_cleanup(). Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Thibaut Collet <thibaut.collet@6wind.com>
2015-10-22vhost-user: send log shm fd along with log_baseMarc-André Lureau
Send the shm for the dirty pages logging if the backend supports VHOST_USER_PROTOCOL_F_LOG_SHMFD. Wait for a reply to make sure the old log is no longer used. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Thibaut Collet <thibaut.collet@6wind.com>
2015-10-22vhost: alloc shareable logMarc-André Lureau
If the backend is requires it, allocate shareable memory. vhost_log_get() now uses 2 globals "vhost_log" and "vhost_log_shm", that way there is a common non-shareable log and a common shareable one. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Thibaut Collet <thibaut.collet@6wind.com>
2015-10-22vhost: add vhost_set_log_base opMarc-André Lureau
Split VHOST_SET_LOG_BASE call in a seperate function callback, so that type safety works and more arguments can be added in the next patches. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Thibaut Collet <thibaut.collet@6wind.com>
2015-10-22vhost: document log resizingMarc-André Lureau
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Thibaut Collet <thibaut.collet@6wind.com>
2015-10-22vhost: fail backend intialization earlyIgor Mammedov
Don't initialize vhost backend if memslots number exceeds the supported limit. This prevents failures down the road when backend is actually started. [MST: rewrite commit log] Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-22vhost: add vhost_has_free_slot() interfaceIgor Mammedov
it will allow for other parts of QEMU check if it's safe to map memory region during hotplug/runtime. That way hotplug path will have a chance to cancel hotplug operation instead of crashing in vhost_commit(). Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-09-24vhost-user: add multiple queue supportChangchun Ouyang
This patch is initially based a patch from Nikolay Nikolaev. This patch adds vhost-user multiple queue support, by creating a nc and vhost_net pair for each queue. Qemu exits if find that the backend can't support the number of requested queues (by providing queues=# option). The max number is queried by a new message, VHOST_USER_GET_QUEUE_NUM, and is sent only when protocol feature VHOST_USER_PROTOCOL_F_MQ is present first. The max queue check is done at vhost-user initiation stage. We initiate one queue first, which, in the meantime, also gets the max_queues the backend supports. In older version, it was reported that some messages are sent more times than necessary. Here we came an agreement with Michael that we could categorize vhost user messages to 2 types: non-vring specific messages, which should be sent only once, and vring specific messages, which should be sent per queue. Here I introduced a helper function vhost_user_one_time_request(), which lists following messages as non-vring specific messages: VHOST_USER_SET_OWNER VHOST_USER_RESET_DEVICE VHOST_USER_SET_MEM_TABLE VHOST_USER_GET_QUEUE_NUM For above messages, we simply ignore them when they are not sent the first time. Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Tested-by: Marcel Apfelbaum <marcel@redhat.com>
2015-09-24vhost: introduce vhost_backend_get_vq_index methodYuanhan Liu
Minusing the idx with the base(dev->vq_index) for vhost-kernel, and then adding it back for vhost-user doesn't seem right. Here introduces a new method vhost_backend_get_vq_index() for getting the right vq index for following vhost messages calls. Suggested-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Tested-by: Marcel Apfelbaum <marcel@redhat.com>
2015-09-10virtio: avoid leading underscores for helpersCornelia Huck
Commit ef546f1275f6563e8934dd5e338d29d9f9909ca6 ("virtio: add feature checking helpers") introduced a helper __virtio_has_feature. We don't want to use reserved identifiers, though, so let's rename __virtio_has_feature to virtio_has_feature and virtio_has_feature to virtio_vdev_has_feature. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-23vhost: correctly pass error to caller in vhost_dev_enable_notifiers()Jason Wang
We override the error value r in fail_vq, this will cause the caller can't detect the failure which may cause the caller may disable the notifiers twice if vhost is failed to start. Fix this by using another variable to keep track the return value of set_host_notifier(). Fixes b0b3db79559e57db340b292621c397e7a6cdbdc5 ("vhost-net: cleanup host notifiers at last step") Cc: qemu-stable@nongnu.org Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-19Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
virtio, pci fixes, enhancements Most notably this includes virtio cross-endian patches. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Fri Jun 19 11:18:05 2015 BST using RSA key ID D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" * remotes/mst/tags/for_upstream: vhost: enable vhost without without MSI-X pci: Don't register a specialized 'config_write' if default behavior is intended hw/core: rebase sysbus_get_fw_dev_path() to g_strdup_printf() vhost_net: re-enable when cross endian vhost-net: tell tap backend about the vnet endianness tap: fix non-linux build tap: add VNET_LE/VNET_BE operations vhost: set vring endianness for legacy virtio virtio: introduce virtio_legacy_is_cross_endian() linux-headers: sync vhost.h vhost-user: part of virtio Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-19vhost: enable vhost without without MSI-XPankaj Gupta
We use vhostforce to enable vhost even if Guests don't have MSI-X support and we fall back to QEMU virtio-net. This gives a very small performance gain, but the disadvantage is that guest now controls which virtio code is running (qemu or vhost) so our attack surface is doubled. This patch will enable vhost unconditionally whenever it's requested. For compatibility, enable vhost when vhostforce is set, as well. Signed-off-by: Pankaj Gupta <pagupta@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Jason Wang <jasowang@redhat.com>
2015-06-17vhost: set vring endianness for legacy virtioGreg Kurz
Legacy virtio is native endian: if the guest and host endianness differ, we have to tell vhost so it can swap bytes where appropriate. This is done through a vhost ring ioctl. Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-11Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
pc, acpi, virtio Most notably this includes virtio 1 patches Still not all devices converted, and not fully spec compliant, so disabled by default. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Thu Jun 11 12:53:08 2015 BST using RSA key ID D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" * remotes/mst/tags/for_upstream: (42 commits) i386/acpi-build: fix PXB workarounds for unsupported BIOSes i386/acpi-build: more traditional _UID and _HID for PXB root buses vhost-scsi: move qdev properties into vhost-scsi.c virtio-9p-device: move qdev properties into virtio-9p-device.c virtio-serial-bus: move qdev properties into virtio-serial-bus.c virtio-rng: move qdev properties into virtio-rng.c virtio-scsi: move qdev properties into virtio-scsi.c virtio-net.h: Remove unsed DEFINE_VIRTIO_NET_PROPERTIES virtio-net: move qdev properties into virtio-net.c virtio-input: emulated devices [pci] virtio-input: core code & base class [pci] pci: add PCI_CLASS_INPUT_* virtio-pci: fill VirtIOPCIRegions early. virtio-pci: drop identical virtio_pci_cap virtio-pci: move cap type to VirtIOPCIRegion virtio-pci: move virtio_pci_add_mem_cap call to virtio_pci_modern_region_map virtio-pci: add virtio_pci_modern_region_map() virtio-pci: add virtio_pci_modern_regions_init() virtio-pci: add struct VirtIOPCIRegion for virtio-1 regions virtio-balloon: switch to virtio_add_feature ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-10vhost: 64 bit featuresCornelia Huck
Make sure that all vhost interfaces use 64 bit features, as the virtio core does, and make sure to use ULL everywhere possible to be on the safe side. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-10vhost: put log correctly in vhost_dev_start()Jason Wang
We allocate an dummy log even if the size is zero. So we should put it unconditionally too. Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-05memory: prepare for multiple bits in the dirty log maskPaolo Bonzini
When the dirty log mask will also cover other bits than DIRTY_MEMORY_VGA, some listeners may be interested in the overall zero/non-zero value of the dirty log mask; others may be interested in the value of single bits. For this reason, always call log_start/log_stop if bits have respectively appeared or disappeared, and pass the old and new values of the dirty log mask so that listeners can distinguish the kinds of change. For example, KVM checks if dirty logging used to be completely disabled (in log_start) or is now completely disabled (in log_stop). On the other hand, Xen has to check manually if DIRTY_MEMORY_VGA changed, since that is the only bit it cares about. Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-05memory: differentiate memory_region_is_logging and ↵Paolo Bonzini
memory_region_get_dirty_log_mask For now memory regions only track DIRTY_MEMORY_VGA individually, but this will change soon. To support this, split memory_region_is_logging in two functions: one that returns a given bit from dirty_log_mask, and one that returns the entire mask. memory_region_is_logging gets an extra parameter so that the compiler flags misuse. While VGA-specific users (including the Xen listener!) will want to keep checking that bit, KVM and vhost check for "any bit except migration" (because migration is handled via the global start/stop listener callbacks). Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-06-04vhost: logs sharingJason Wang
Currently we allocate one vhost log per vhost device. This is sub optimal when: - Guest has several device with vhost as backend - Guest has multiqueue devices In the above cases, we can avoid the memory allocation by sharing a single vhost log among all the vhost devices. This is done through: - Introducing a new vhost_log structure with refcnt inside. - Using a global pointer to vhost_log structure that will be used. And introduce helper to get the log with expected log size and helper to - drop the refcnt to the old log. - Each vhost device still keep track of a pointer to the log that was used. With above, if no resize happens, all vhost device will share a single vhost log. During resize, a new vhost_log structure will be allocated and made for the global pointer. And each vhost devices will drop the refcnt to the old log. Tested by doing scp during migration for a 2 queues virtio-net-pci. Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-04-20vhost: fix log base addressMichael S. Tsirkin
VHOST_SET_LOG_BASE got an incorrect address, causing migration errors and potentially even memory corruption. Reported-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Amos Kong <akong@redhat.com> Message-id: 1429283565-32265-1-git-send-email-mst@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-01vhost: Fix vhostfd leak in error branchGonglei
Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 1417166789-1960-1-git-send-email-arei.gonglei@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-09-03vhost_net: start/stop guest notifiers properlyJason Wang
commit a9f98bb5ebe6fb1869321dcc58e72041ae626ad8 "vhost: multiqueue support" changed the order of stopping the device. Previously vhost_dev_stop would disable backend and only afterwards, unset guest notifiers. We now unset guest notifiers while vhost is still active. This can lose interrupts causing guest networking to fail. In particular, this has been observed during migration. To fix this, several other changes are needed: - remove the hdev->started assertion in vhost.c since we may want to start the guest notifiers before vhost starts and stop the guest notifiers after vhost is stopped. - introduce the vhost_net_set_vq_index() and call it before setting guest notifiers. This is to guarantee vhost_net has the correct virtqueue index when setting guest notifiers. MST: fix up error handling. Cc: qemu-stable@nongnu.org Cc: Jason Wang <jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Andrey Korolyov <andrey@xdel.ru> Reported-by: "Zhangjie (HZ)" <zhangjie14@huawei.com> Tested-by: William Dauchy <william@gandi.net> Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-23vhost: fix resource leak in error handlingMichael S. Tsirkin
vhost_verify_ring_mappings leaks mappings on error. Fix this up. Cc: qemu-stable@nongnu.org Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-23vhost: block migration if backend does not log memoryMichael S. Tsirkin
vhost user does not support LOG_ALL feature bit. Generally, we should not try to set this bit without checking that backend can support it first. Detect and block migration. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19Add vhost-backend and VhostBackendTypeNikolay Nikolaev
Use vhost_set_backend_type to initialise a proper vhost_ops structure. In vhost_net_init and vhost_net_start_one call conditionally TAP related initialisation depending on the vhost backend type. Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19Add vhost_ops to vhost_dev struct and replace all relevant ioctlsNikolay Nikolaev
Decouple vhost from the Linux kernel by introducing vhost_ops. The intention is to provide different backends - a 'kernel' backend based on the ioctl interface, and an 'user' backend based on a UNIX domain socket and shared memory interface. Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19vhost_net_init will use VhostNetOptions to get all its argumentsNikolay Nikolaev
vhost_dev_init will replace devfd and devpath with a single opaque argument. This is initialised with a file descriptor. When TAP is used (through vhost_net), open /dev/vhost-net and pass the fd as an opaque parameter in VhostNetOptions. The same applies to vhost-scsi - open /dev/vhost-scsi and pass the fd. Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19vhost: add vhost_get_features and vhost_ack_featuresNikolay Nikolaev
Generalize the features get/ack to be used for both vhost-net and vhost-scsi. In vhost-net add vhost_net_get_feature_bits to select the feature bit set depending on the NetClient kind. Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19virtio: Drop superfluous conditionals around g_free()Markus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2014-06-11vhost: replace ffsl with ctzlNatanael Copa
Avoid using the GNU extesion ffsl which is not implemented in musl libc. The atomic_xchg() means we know that vhost_log_chunk_t will never be larger than the 'long' type, so ctzl() is always sufficient. See also commit fbeadf50 (bitops: unify bitops_ffsl with the one in host-utils.h, call it bitops_ctzl) on why ctzl should be used instead of ffsl. Signed-off-by: Natanael Copa <ncopa@alpinelinux.org> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-08-12vhost: clear signalled_used_valid on vhost stopMichael S. Tsirkin
When vhost device stops, its implementation synchronizes kernel state back to virtio.c so we can continue emulating the device in userspace. This patch ensures that virtio.c's signalled_used_valid flag is reset so that userspace does not suppress guest notifications due to stale signalled_used values. Cc: qemu-stable@nongnu.org Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-04add a header file for atomic operationsPaolo Bonzini
We're already using them in several places, but __sync builtins are just too ugly to type, and do not provide seqcst load/store operations. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-04memory: add ref/unref callsPaolo Bonzini
Add ref/unref calls at the following places: - places where memory regions are stashed by a listener and used outside the BQL (including in Xen or KVM). - memory_region_find callsites - creation of aliases and containers (only the aliased/contained region gets a reference to avoid loops) - around calls to del_subregion/add_subregion, where the region could disappear after the first call Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-06-20memory: make section size a 128-bit integerPaolo Bonzini
So far, the size of all regions passed to listeners could fit in 64 bits, because artificial regions (containers and aliases) are eliminated by the memory core, leaving only device regions which have reasonable sizes An IOMMU however cannot be eliminated by the memory core, and may have an artificial size, hence we may need 65 bits to represent its size. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-24virtio: remove virtiobindings.KONRAD Frederic
This remove virtio-bindings, and use class instead. Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Message-id: 1366791683-5350-6-git-send-email-fred.konrad@greensocs.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-19vhost: Add vhost_commit callback for SeaBIOS ROM region re-mappingNicholas Bellinger
This patch follows MST's recommendation to move checks for vhost_verify_ring_mappings() -> cpu_physical_memory_map() operations from MemoryListener->region_[add,del]() -> vhost_set_memory() into final MemoryListener->commit() -> vhost_commit() callback. It addresses the case where virtio-scsi vq ioport RAM re-mapping to read-only SeaBIOS ROM triggers a cpu_physical_memory_map() NIL MemoryRegionSection pointer failure. Also save vhost_dev->mem_changed_[start,end]_addr values in vhost_set_memory() for final ranges_overlap checks. (Thanks Paolo!) Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Asias He <asias@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move virtio devices to hw/ subdirectoriesPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-29 15:53:39 +0000