| Age | Commit message (Collapse) | Author |
|---|
|
The state.num value will probably be 0 in this case, but that
doesn't make sense to update.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Not all vhost-user backends support ops->vhost_net_set_backend(). It is
a nicer to provide an assert/error than to crash trying to
call. Furthermore, it improves a bit the code by hiding vhost_ops
details.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
All these functions must be called only after the backend is connected.
They are called from virtio-net.c, after either virtio or link status
change.
The check for nc->peer->link_down should ensure vhost_net_{start,stop}()
are always called between vhost_user_{start,stop}().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Let's use qemu proper error reporting API, this ensures the error is
reported at the right place (stderr or monitor), with a conventional
format.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Add missing VHOST_OPS_DEBUG() logs, for completeness.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Calling a vhost operation may fail, for example with disconnected
vhost-user backend, but qemu shouldn't abort in this case.
Log an error instead, except on error and cleanup code paths where it
can be mostly ignored.
Let's use a VHOST_OPS_DEBUG macro to easily disable those messages once
disconnected backend stabilizes.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
vhost_net_init() calls vhost_dev_init() and in case of failure, calls
vhost_dev_cleanup() directly. However, the structure is already
partially cleaned on error. Calling vhost_dev_cleanup() again will call
vhost_virtqueue_cleanup() on already clean queues, and causing potential
double-close. Instead, adjust dev->nvqs and simplify vhost_dev_init()
code to not call vhost_virtqueue_cleanup() but vhost_dev_cleanup()
instead.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
It is called on multiple code path, so make it safe to call several
times (note: I don't remember a reproducer here, but a function called
'cleanup' should probably be idempotent in my book)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
If vhost_dev_init() failed, caller may still call vhost_dev_cleanup()
later. However, vhost_dev_cleanup() tries to remove the device from the
list even if it wasn't yet added, which may lead to crashes. Similarly
for the memory listener.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Make sure the log was released on cleanup, or it will leak (the
alternative is to call vhost_log_put() unconditionally, but it may hide
some dev state issues).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Although not strictly required, it is nice to have vhost_log_put()
safely callable multiple times.
Clear dev->log* when calling vhost_log_put() to make the function
idempotent. This also simplifies a bit the caller work.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
vhost-dev opaque isn't necessarily an fd, it can be a chardev when using
vhost-user. Goto fail, so vhost_backend_cleanup() is called to handle
backend cleanup appropriately.
vhost_set_backend_type() should never fail, use an assert().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This patch add the capability of basic vhost net busy polling which is
supported by recent kernel. User could configure the maximum number of
us that could be spent on busy polling through a new property of tap
"poll-us".
Cc: Greg Kurz <groug@kaod.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
|
|
All users have been converted to the new ioevent callbacks.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Have vhost and dataplane use the new api for transports that
have been converted.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Paolo's recent cpu.h cleanups broke legacy virtio for ppc64 LE guests (and
arm BE guests as well, even if I have not verified that). Especially, commit
"33c11879fd42 qemu-common: push cpu.h inclusion out of qemu-common.h" has
the side-effect of silently hiding the TARGET_IS_BIENDIAN macro from the
virtio memory accessors, and thus fully disabling support of endian changing
targets.
To be sure this cannot happen again, let's gather all the bi-endian bits
where they belong in include/hw/virtio/virtio-access.h.
The changes in hw/virtio/vhost.c are safe because vhost_needs_vring_endian()
is not called on a hot path and non bi-endian targets will return false
anyway.
While here, also rename TARGET_IS_BIENDIAN to be more precise: it is only for
legacy virtio and bi-endian guests.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Commit 57cb38b included qapi/error.h into qemu/osdep.h to get the
Error typedef. Since then, we've moved to include qemu/osdep.h
everywhere. Its file comment explains: "To avoid getting into
possible circular include dependencies, this file should not include
any other QEMU headers, with the exceptions of config-host.h,
compiler.h, os-posix.h and os-win32.h, all of which are doing a
similar job to this file and are under similar constraints."
qapi/error.h doesn't do a similar job, and it doesn't adhere to
similar constraints: it includes qapi-types.h. That's in excess of
100KiB of crap most .c files don't actually need.
Add the typedef to qemu/typedefs.h, and include that instead of
qapi/error.h. Include qapi/error.h in .c files that need it and don't
get it now. Include qapi-types.h in qom/object.h for uint16List.
Update scripts/clean-includes accordingly. Update it further to match
reality: replace config.h by config-target.h, add sysemu/os-posix.h,
sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h
comment quoted above similarly.
This reduces the number of objects depending on qapi/error.h from "all
of them" to less than a third. Unfortunately, the number depending on
qapi-types.h shrinks only a little. More work is needed for that one.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
[Fix compilation without the spice devel packages. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
vhost currently merges regions with contiguious virtual and physical
addresses. This breaks for vhost-user since that also needs fds to
match.
Add a vhost_ops entry to compare the fds for vhost-user only.
Cc: qemu-stable@nongnu.org
Cc: Victor Kaplansky <victork@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Since guest_mask_notifier can not be used in vhost-user mode due
to buffering implied by unix control socket, force
use_mask_notifier on virtio devices of vhost-user interfaces, and
send correct callfd to the guest at vhost start.
Using guest_notifier_mask function in vhost-user case may
break interrupt mask paradigm, because mask/unmask is not
really done when returning from guest_notifier_mask call, instead
message is posted in a unix socket, and processed later.
Add an option boolean flag 'use_mask_notifier' to disable the use
of guest_notifier_mask in virtio pci.
Signed-off-by: Didier Pallard <didier.pallard@6wind.com>
Signed-off-by: Victor Kaplansky <victork@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
After the call to virtio_vdev_has_feature(), we only care for legacy
devices, so we don't need the extra check in virtio_is_big_endian().
Also the device_endian field is always set (VIRTIO_DEVICE_ENDIAN_UNKNOWN
may only happen on a virtio_load() path that cannot lead here), so we
don't need the assert() either.
This open codes the device_endian checking in vhost_needs_vring_endian().
It also adds a comment to explain the logic, as recent reviews showed the
cross-endian tweaks aren't that obvious.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
|
|
Indeed vhost doesn't need to ask for vring endian fixing if the device is
virtio 1.0, since it is already handled by the in-kernel vhost driver. This
patch simply consolidates the logic into the existing helper.
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
|
|
If target is bi-endian (ppc64, arm), the virtio_legacy_is_cross_endian()
indeed returns the runtime state of the virtio device. However, it returns
false unconditionally in the general case. This sounds a bit strange
given the name of the function.
This helper is only useful for vhost actually, where indeed non bi-endian
targets don't have to deal with cross-endian issues.
This patch moves the helper to vhost.c and gives it a more appropriate name.
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
|
|
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-15-git-send-email-peter.maydell@linaro.org
|
|
This reverts commit 3a12f32229a046f4d4ab0a3a52fb01d2d5a1ab76.
In case of live migration several queues can be enabled and not only the
first one. So informing backend that only the first queue is enabled is
wrong.
Reported-by: Thibaut Collet <thibaut.collet@6wind.com>
Cc: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
|
|
Send SET_VRING_ENABLE at start/stop, to give the backend
an explicit sign of our state.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
When a live migration is started the log address to mark dirty pages is provided
to the vhost backend through the vhost_dev_set_log function.
This function is called for each queue pairs but the queue index is wrongly set:
always set to the first queue pair. Then vhost backend lost descriptor addresses
of the queue pairs greater than 1 and behaviour of the vhost backend is
unpredictable.
The queue index is computed by taking account of the vq_index (to retrieve the
queue pair index) and calling the vhost_get_vq_index method of the backend.
Signed-off-by: Thibaut Collet <thibaut.collet@6wind.com>
Cc: qemu-stable@nongnu.org
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Thibaut Collet <thibaut.collet@6wind.com>
|
|
Replace the generic vhost_call() by specific functions for each
function call to help with type safety and changing arguments.
While doing this, I found that "unsigned long long" and "uint64_t" were
used interchangeably and causing compilation warnings, using uint64_t
instead, as the vhost & protocol specifies.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[Fix enum usage and MQ - Thibaut Collet]
Signed-off-by: Thibaut Collet <thibaut.collet@6wind.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Thibaut Collet <thibaut.collet@6wind.com>
|
|
If VHOST_USER_PROTOCOL_F_LOG_SHMFD is not announced, block vhost-user
migration. The blocker is removed in vhost_dev_cleanup().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Thibaut Collet <thibaut.collet@6wind.com>
|
|
Send the shm for the dirty pages logging if the backend supports
VHOST_USER_PROTOCOL_F_LOG_SHMFD. Wait for a reply to make sure
the old log is no longer used.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Thibaut Collet <thibaut.collet@6wind.com>
|
|
If the backend is requires it, allocate shareable memory.
vhost_log_get() now uses 2 globals "vhost_log" and "vhost_log_shm", that
way there is a common non-shareable log and a common shareable one.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Thibaut Collet <thibaut.collet@6wind.com>
|
|
Split VHOST_SET_LOG_BASE call in a seperate function callback, so that
type safety works and more arguments can be added in the next patches.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Thibaut Collet <thibaut.collet@6wind.com>
|
|
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Thibaut Collet <thibaut.collet@6wind.com>
|
|
Don't initialize vhost backend if memslots number exceeds the supported
limit. This prevents failures down the road when backend
is actually started.
[MST: rewrite commit log]
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
it will allow for other parts of QEMU check if it's safe
to map memory region during hotplug/runtime.
That way hotplug path will have a chance to cancel
hotplug operation instead of crashing in vhost_commit().
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This patch is initially based a patch from Nikolay Nikolaev.
This patch adds vhost-user multiple queue support, by creating a nc
and vhost_net pair for each queue.
Qemu exits if find that the backend can't support the number of requested
queues (by providing queues=# option). The max number is queried by a
new message, VHOST_USER_GET_QUEUE_NUM, and is sent only when protocol
feature VHOST_USER_PROTOCOL_F_MQ is present first.
The max queue check is done at vhost-user initiation stage. We initiate
one queue first, which, in the meantime, also gets the max_queues the
backend supports.
In older version, it was reported that some messages are sent more times
than necessary. Here we came an agreement with Michael that we could
categorize vhost user messages to 2 types: non-vring specific messages,
which should be sent only once, and vring specific messages, which should
be sent per queue.
Here I introduced a helper function vhost_user_one_time_request(), which
lists following messages as non-vring specific messages:
VHOST_USER_SET_OWNER
VHOST_USER_RESET_DEVICE
VHOST_USER_SET_MEM_TABLE
VHOST_USER_GET_QUEUE_NUM
For above messages, we simply ignore them when they are not sent the first
time.
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Tested-by: Marcel Apfelbaum <marcel@redhat.com>
|
|
Minusing the idx with the base(dev->vq_index) for vhost-kernel, and
then adding it back for vhost-user doesn't seem right. Here introduces
a new method vhost_backend_get_vq_index() for getting the right vq
index for following vhost messages calls.
Suggested-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Tested-by: Marcel Apfelbaum <marcel@redhat.com>
|
|
Commit ef546f1275f6563e8934dd5e338d29d9f9909ca6 ("virtio: add
feature checking helpers") introduced a helper __virtio_has_feature.
We don't want to use reserved identifiers, though, so let's
rename __virtio_has_feature to virtio_has_feature and virtio_has_feature
to virtio_vdev_has_feature.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
We override the error value r in fail_vq, this will cause the caller
can't detect the failure which may cause the caller may disable the
notifiers twice if vhost is failed to start. Fix this by using another
variable to keep track the return value of set_host_notifier().
Fixes b0b3db79559e57db340b292621c397e7a6cdbdc5 ("vhost-net: cleanup
host notifiers at last step")
Cc: qemu-stable@nongnu.org
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
virtio, pci fixes, enhancements
Most notably this includes virtio cross-endian patches.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri Jun 19 11:18:05 2015 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream:
vhost: enable vhost without without MSI-X
pci: Don't register a specialized 'config_write' if default behavior is intended
hw/core: rebase sysbus_get_fw_dev_path() to g_strdup_printf()
vhost_net: re-enable when cross endian
vhost-net: tell tap backend about the vnet endianness
tap: fix non-linux build
tap: add VNET_LE/VNET_BE operations
vhost: set vring endianness for legacy virtio
virtio: introduce virtio_legacy_is_cross_endian()
linux-headers: sync vhost.h
vhost-user: part of virtio
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
We use vhostforce to enable vhost even if Guests don't have MSI-X
support and we fall back to QEMU virtio-net.
This gives a very small performance gain, but the disadvantage
is that guest now controls which virtio code is running
(qemu or vhost) so our attack surface is doubled.
This patch will enable vhost unconditionally whenever it's requested.
For compatibility, enable vhost when vhostforce is set, as well.
Signed-off-by: Pankaj Gupta <pagupta@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
|
|
Legacy virtio is native endian: if the guest and host endianness differ,
we have to tell vhost so it can swap bytes where appropriate. This is
done through a vhost ring ioctl.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
pc, acpi, virtio
Most notably this includes virtio 1 patches
Still not all devices converted, and not fully spec compliant,
so disabled by default.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Thu Jun 11 12:53:08 2015 BST using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream: (42 commits)
i386/acpi-build: fix PXB workarounds for unsupported BIOSes
i386/acpi-build: more traditional _UID and _HID for PXB root buses
vhost-scsi: move qdev properties into vhost-scsi.c
virtio-9p-device: move qdev properties into virtio-9p-device.c
virtio-serial-bus: move qdev properties into virtio-serial-bus.c
virtio-rng: move qdev properties into virtio-rng.c
virtio-scsi: move qdev properties into virtio-scsi.c
virtio-net.h: Remove unsed DEFINE_VIRTIO_NET_PROPERTIES
virtio-net: move qdev properties into virtio-net.c
virtio-input: emulated devices [pci]
virtio-input: core code & base class [pci]
pci: add PCI_CLASS_INPUT_*
virtio-pci: fill VirtIOPCIRegions early.
virtio-pci: drop identical virtio_pci_cap
virtio-pci: move cap type to VirtIOPCIRegion
virtio-pci: move virtio_pci_add_mem_cap call to virtio_pci_modern_region_map
virtio-pci: add virtio_pci_modern_region_map()
virtio-pci: add virtio_pci_modern_regions_init()
virtio-pci: add struct VirtIOPCIRegion for virtio-1 regions
virtio-balloon: switch to virtio_add_feature
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Make sure that all vhost interfaces use 64 bit features, as the virtio
core does, and make sure to use ULL everywhere possible to be on the
safe side.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
|
|
We allocate an dummy log even if the size is zero. So we should put it
unconditionally too.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
When the dirty log mask will also cover other bits than DIRTY_MEMORY_VGA,
some listeners may be interested in the overall zero/non-zero value of
the dirty log mask; others may be interested in the value of single bits.
For this reason, always call log_start/log_stop if bits have respectively
appeared or disappeared, and pass the old and new values of the dirty log
mask so that listeners can distinguish the kinds of change.
For example, KVM checks if dirty logging used to be completely disabled
(in log_start) or is now completely disabled (in log_stop). On the
other hand, Xen has to check manually if DIRTY_MEMORY_VGA changed,
since that is the only bit it cares about.
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
memory_region_get_dirty_log_mask
For now memory regions only track DIRTY_MEMORY_VGA individually, but
this will change soon. To support this, split memory_region_is_logging
in two functions: one that returns a given bit from dirty_log_mask,
and one that returns the entire mask. memory_region_is_logging gets an
extra parameter so that the compiler flags misuse.
While VGA-specific users (including the Xen listener!) will want to keep
checking that bit, KVM and vhost check for "any bit except migration"
(because migration is handled via the global start/stop listener
callbacks).
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Currently we allocate one vhost log per vhost device. This is sub
optimal when:
- Guest has several device with vhost as backend
- Guest has multiqueue devices
In the above cases, we can avoid the memory allocation by sharing a
single vhost log among all the vhost devices. This is done through:
- Introducing a new vhost_log structure with refcnt inside.
- Using a global pointer to vhost_log structure that will be used. And
introduce helper to get the log with expected log size and helper to
- drop the refcnt to the old log.
- Each vhost device still keep track of a pointer to the log that was
used.
With above, if no resize happens, all vhost device will share a single
vhost log. During resize, a new vhost_log structure will be allocated
and made for the global pointer. And each vhost devices will drop the
refcnt to the old log.
Tested by doing scp during migration for a 2 queues virtio-net-pci.
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
VHOST_SET_LOG_BASE got an incorrect address, causing
migration errors and potentially even memory corruption.
Reported-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Amos Kong <akong@redhat.com>
Message-id: 1429283565-32265-1-git-send-email-mst@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1417166789-1960-1-git-send-email-arei.gonglei@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
