| Age | Commit message (Collapse) | Author |
|---|
|
The name vhost_vdpa_one_time_request() was confusing. No
matter whatever it returns, its typical occurrence had
always been at requests that only need to be applied once.
And the name didn't suggest what it actually checks for.
Change it to vhost_vdpa_first_dev() with polarity flipped
for better readibility of code. That way it is able to
reflect what the check is really about.
This call is applicable to request which performs operation
only once, before queues are set up, and usually at the beginning
of the caller function. Document the requirement for it in place.
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Message-Id: <1651890498-24478-7-git-send-email-si-wei.liu@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
The vhost_vdpa_one_time_request() branch in
vhost_vdpa_set_backend_cap() incorrectly sends down
ioctls on vhost_dev with non-zero index. This may
end up with multiple VHOST_SET_BACKEND_FEATURES
ioctl calls sent down on the vhost-vdpa fd that is
shared between all these vhost_dev's.
To fix it, send down ioctl only once via the first
vhost_dev with index 0. Toggle the polarity of the
vhost_vdpa_one_time_request() test should do the
trick.
Fixes: 4d191cfdc7de ("vhost-vdpa: classify one time request")
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <1651890498-24478-6-git-send-email-si-wei.liu@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
With the introduction of MQ the index of the vq needs to be calculated
with the device model vq_index.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220512175747.142058-5-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Fixes: 6d0b222666 ("vdpa: Adapt vhost_vdpa_get_vring_base to SVQ")
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20220512175747.142058-4-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
These functions were not traced properly.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20220405063628.853745-1-eperezma@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
|
|
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220323155743.1585078-22-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Replace the global variables with inlined helper functions. getpagesize() is very
likely annotated with a "const" function attribute (at least with glibc), and thus
optimization should apply even better.
This avoids the need for a constructor initialization too.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220323155743.1585078-12-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Replace vpda with vdpa.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220328152022.73245-1-sgarzare@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
|
|
SVQ is able to log the dirty bits by itself, so let's use it to not
block migration.
Also, ignore set and clear of VHOST_F_LOG_ALL on set_features if SVQ is
enabled. Even if the device supports it, the reports would be nonsense
because SVQ memory is in the qemu region.
The log region is still allocated. Future changes might skip that, but
this series is already long enough.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
|
|
Setting the log address would make the device start reporting invalid
dirty memory because the SVQ vrings are located in qemu's memory.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
|
|
This is needed to achieve migration, so the destination can restore its
index.
Setting base as last used idx, so destination will see as available all
the entries that the device did not use, including the in-flight
processing ones.
This is ok for networking, but other kinds of devices might have
problems with these retransmissions.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
|
|
Use translations added in VhostIOVATree in SVQ.
Only introduce usage here, not allocation and deallocation. As with
previous patches, we use the dead code paths of shadow_vqs_enabled to
avoid commiting too many changes at once. These are impossible to take
at the moment.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
|
|
Initial version of shadow virtqueue that actually forward buffers. There
is no iommu support at the moment, and that will be addressed in future
patches of this series. Since all vhost-vdpa devices use forced IOMMU,
this means that SVQ is not usable at this point of the series on any
device.
For simplicity it only supports modern devices, that expects vring
in little endian, with split ring and no event idx or indirect
descriptors. Support for them will not be added in this series.
It reuses the VirtQueue code for the device part. The driver part is
based on Linux's virtio_ring driver, but with stripped functionality
and optimizations so it's easier to review.
However, forwarding buffers have some particular pieces: One of the most
unexpected ones is that a guest's buffer can expand through more than
one descriptor in SVQ. While this is handled gracefully by qemu's
emulated virtio devices, it may cause unexpected SVQ queue full. This
patch also solves it by checking for this condition at both guest's
kicks and device's calls. The code may be more elegant in the future if
SVQ code runs in its own iocontext.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
|
|
First half of the buffers forwarding part, preparing vhost-vdpa
callbacks to SVQ to offer it. QEMU cannot enable it at this moment, so
this is effectively dead code at the moment, but it helps to reduce
patch size.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
|
|
This allows SVQ to negotiate features with the guest and the device. For
the device, SVQ is a driver. While this function bypasses all
non-transport features, it needs to disable the features that SVQ does
not support when forwarding buffers. This includes packed vq layout,
indirect descriptors or event idx.
Future changes can add support to offer more features to the guest,
since the use of VirtQueue gives this for free. This is left out at the
moment for simplicity.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
|
|
This will make qemu aware of the device used buffers, allowing it to
write the guest memory with its contents if needed.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
|
|
At this mode no buffer forwarding will be performed in SVQ mode: Qemu
will just forward the guest's kicks to the device.
Host memory notifiers regions are left out for simplicity, and they will
not be addressed in this series.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
|
|
vhost_vdpa_host_notifiers_init() initializes queue notifiers
for queues "dev->vq_index" to queue "dev->vq_index + dev->nvqs",
whereas vhost_vdpa_host_notifiers_uninit() uninitializes the
same notifiers for queue "0" to queue "dev->nvqs".
This asymmetry seems buggy, fix that by using dev->vq_index
as the base for both.
Fixes: d0416d487bd5 ("vhost-vdpa: map virtqueue notification area if possible")
Cc: jasowang@redhat.com
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20220211161309.1385839-1-lvivier@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
If call virtio_queue_set_host_notifier_mr fails, should free
host-notifier memory-region.
This problem can trigger a coredump with some vDPA drivers (mlx5,
but not with the vdpasim), if we unplug the virtio-net card from
the guest after a stop/start.
The same fix has been done for vhost-user:
1f89d3b91e3e ("hw/virtio: Fix leak of host-notifier memory-region")
Fixes: d0416d487bd5 ("vhost-vdpa: map virtqueue notification area if possible")
Cc: jasowang@redhat.com
Resolves: https://bugzilla.redhat.com/2027208
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20220211170259.1388734-1-lvivier@redhat.com>
Cc: qemu-stable@nongnu.org
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This reverts commit 634f7c89fbd78f57d00d5d6b39c0ade9df1fe27f.
Fixes: 634f7c89fb ("vhost-vdpa: add support for config interrupt")
Cc: "Cindy Lu" <lulu@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Almost all VhostOps methods in vdpa_ops follow the convention of
returning negated errno on error.
Adjust the few that don't. To that end, rework vhost_vdpa_add_status to
check if setting of the requested status bits has succeeded and return
the respective error code it hasn't, and propagate the error codes
wherever it's appropriate.
Signed-off-by: Roman Kagan <rvkagan@yandex-team.ru>
Message-Id: <20211111153354.18807-8-rvkagan@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Add new call back function in vhost-vdpa, this function will
set the event fd to kernel. This function will be called
in the vhost_dev_start and vhost_dev_stop
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20211104164827.21911-6-lulu@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The doc of this field pointed out that last_index is the last vq index.
This is misleading, since it's actually one past the end of the vqs.
Renaming and modifying comment.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20211104085625.2054959-2-eperezma@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Similar to VFIO, vDPA will go ahead an map+pin all guest memory. Memory
that used to be discarded will get re-populated and if we
discard+re-access memory after mapping+pinning, the pages mapped into the
vDPA IOMMU will go out of sync with the actual pages mapped into the user
space page tables.
Set discarding of RAM broken such that:
- virtio-mem and vhost-vdpa run mutually exclusive
- virtio-balloon is inhibited and no memory discards will get issued
In the future, we might be able to support coordinated discarding of RAM
as used by virtio-mem and already supported by vfio via the
RamDiscardManager.
Acked-by: Jason Wang <jasowang@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Cindy Lu <lulu@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20211027130324.59791-1-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
|
|
This patch implements the multiqueue support for vhost-vdpa. This is
done simply by reading the number of queue pairs from the config space
and initialize the datapath and control path net client.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20211020045600.16082-11-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Unlike vhost-kernel, vhost-vdpa adapts a single device multiqueue
model. So we need to simply use virtqueue index as the vhost virtqueue
index. This is a must for multiqueue to work for vhost-vdpa.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20211020045600.16082-4-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Vhost-vdpa uses one device multiqueue queue (pairs) model. So we need
to classify the one time request (e.g SET_OWNER) and make sure those
request were only called once per device.
This is used for multiqueue support.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20211020045600.16082-3-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Check vdpa device range before updating memory regions so we don't add
any outside of it, and report the invalid change if any.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20211014141236.923287-4-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
|
|
Abstract this operation, that will be reused when validating the region
against the iova range that the device supports.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20211014141236.923287-3-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
|
|
Following the logic of commit 56918a126ae ("memory: Add RAM_PROTECTED
flag to skip IOMMU mappings") with VFIO, skip memory sections
inaccessible via normal mechanisms, including DMA.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20211014141236.923287-2-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
|
|
Provide a name field for all the memory listeners. It can be used to identify
which memory listener is which.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210817013553.30584-2-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
We should return error code instead of zero, otherwise there's no way
for the caller to detect the failure.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20210903091031.47303-3-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
With the introduction of the batch hinting, meaningless batches can be
created with no IOTLB updates if the memory region was skipped by
vhost_vdpa_listener_skipped_section. This is the case of host notifiers
memory regions, device un/realize, and others. This causes the vdpa
device to receive dma mapping settings with no changes, a possibly
expensive operation for nothing.
To avoid that, VHOST_IOTLB_BATCH_BEGIN hint is delayed until we have a
meaningful (not skipped section) mapping or unmapping operation, and
VHOST_IOTLB_BATCH_END is not written unless at least one of _UPDATE /
_INVALIDATE has been issued.
v3:
* Use a bool instead of a counter avoiding potential number wrapping
* Fix bad check on _commit
* Move VHOST_BACKEND_F_IOTLB_BATCH check to
vhost_vdpa_iotlb_batch_begin_once
v2 (from RFC):
* Rename misleading name
* Abstract start batching function for listener_add/del
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Message-Id: <20210812140933.226288-1-eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Instead of just returning 0/-1 and letting the caller make up a
meaningless error message, add an Error parameter to allow reporting the
real error and switch to 0/-errno so that different kind of errors can
be distinguished in the caller.
config_len in vhost_user_get_config() is defined by the device, so if
it's larger than VHOST_USER_MAX_CONFIG_SIZE, this is a programming
error. Turn the corresponding check into an assertion.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210609154658.350308-6-kwolf@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Instead of just returning 0/-1 and letting the caller make up a
meaningless error message, switch to 0/-errno so that different kinds of
errors can be distinguished in the caller.
This involves changing a few more callbacks in VhostOps to return
0/-errno: .vhost_set_owner(), .vhost_get_features() and
.vhost_virtqueue_set_busyloop_timeout(). The implementations of these
functions are trivial as they generally just send a message to the
backend.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210609154658.350308-4-kwolf@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Instead of just returning 0/-1 and letting the caller make up a
meaningless error message, add an Error parameter to allow reporting the
real error and switch to 0/-errno so that different kind of errors can
be distinguished in the caller.
Specifically, in vhost-user, EPROTO is used for all errors that relate
to the connection itself, whereas other error codes are used for errors
relating to the content of the connection. This will allow us later to
automatically reconnect when the connection goes away, without ending up
in an endless loop if it's a permanent error in the configuration.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210609154658.350308-3-kwolf@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
We used to initialize backend_features during vhost_vdpa_init()
regardless whether or not it was supported by vhost. This will lead
the unsupported features like VIRTIO_F_IN_ORDER to be included and set
to the vhost-vdpa during vhost_dev_start. Because the
VIRTIO_F_IN_ORDER is not supported by vhost-vdpa so it won't be
advertised to guest which will break the datapath.
Fix this by not initializing the backend_features, so the
acked_features could be built only from guest features via
vhost_net_ack_features().
Fixes: 108a64818e69b ("vhost-vdpa: introduce vhost-vdpa backend")
Cc: qemu-stable@nongnu.org
Cc: Gautam Dawar <gdawar@xilinx.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
|
|
This patch implements the vq notification mapping support for
vhost-vDPA. This is simply done by using mmap()/munmap() for the
vhost-vDPA fd during device start/stop. For the device without
notification mapping support, we fall back to eventfd based
notification gracefully.
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
|
|
vDPA is not tie to any specific hardware, for safety and simplicity,
vhost-vDPA doesn't allow MMIO area to be mapped via IOTLB. Only the
doorbell could be mapped via mmap(). So this patch exclude skip the
ram device from the IOTLB mapping.
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
|
|
The symbol address_space_memory are already declared in
include/exec/address-spaces.h. So let's add this header file
and remove the redundant declaration in include/hw/virtio/vhost-vdpa.h.
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20210517123246.999-1-xieyongji@bytedance.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
|
|
As it's only used inside hw/virtio/vhost-vdpa.c.
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Message-Id: <20210413133737.1574-1-yuzenghui@huawei.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Fix uninitialized value issues reported by Coverity:
Field 'msg.reserved' is uninitialized when calling write().
Fixes: a5bd05800f8 ("vhost-vdpa: batch updating IOTLB mappings")
Reported-by: Coverity (CID 1432864: UNINIT)
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201028154004.776760-1-philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Add trace functions in vhost-vdpa.c.
All traces from this file can be enabled with '-trace vhost_vdpa*'.
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20200925091055.186023-3-lvivier@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
To speed up the memory mapping updating between vhost-vDPA and vDPA
device driver, this patch passes the IOTLB batching flags via IOTLB
API. Two new flags was introduced, VHOST_IOTLB_BATCH_BEGIN is a hint
that a bathced IOTLB updating may be initiated from the
userspace. VHOST_IOTLB_BATCH_END is a hint that userspace has finished
the updating:
VHOST_IOTLB_BATCH_BEGIN
VHOST_IOTLB_UPDATE/VHOST_IOTLB_INVALIDATE
...
VHOST_IOTLB_BATCH_END
Vhost-vDPA can then know that all mappings has been set and can do
optimization like passing all the mappings to the vDPA device driver.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20200907104903.31551-4-jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
in vhost_vdpa_listener_region_del(), try_unmap is always true and so,
vhost_vdpa_dma_unmap() is always called. We can remove the variable
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Message-Id: <20200920152024.860172-1-lvivier@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
|
|
If g_malloc fails, the application will be terminated.
No need to check the return value of g_malloc.
Signed-off-by: Li Qiang <liq3ea@163.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200819144309.67579-1-liq3ea@163.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
|
|
This patch fixes wrong indentation of some vdpa_ops fields introduced
with the initial commit 108a64818e ("vhost-vdpa: introduce vhost-vdpa
backend")
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200916152634.56917-1-sgarzare@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
|
|
In the function vhost_vdpa_dma_map/unmap, The struct msg was not initialized all its fields.
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20200710064642.24505-1-lulu@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Cc: qemu-stable@nongnu.org
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Fix the compile issue in the system without the kvm support
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <20200708084922.21904-1-lulu@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Currently we have 2 types of vhost backends in QEMU: vhost kernel and
vhost-user. The above patch provides a generic device for vDPA purpose,
this vDPA device exposes to user space a non-vendor-specific configuration
interface for setting up a vhost HW accelerator, this patch set introduces
a third vhost backend called vhost-vdpa based on the vDPA interface.
Vhost-vdpa usage:
qemu-system-x86_64 -cpu host -enable-kvm \
......
-netdev type=vhost-vdpa,vhostdev=/dev/vhost-vdpa-id,id=vhost-vdpa0 \
-device virtio-net-pci,netdev=vhost-vdpa0,page-per-vq=on \
Signed-off-by: Lingshan zhu <lingshan.zhu@intel.com>
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Signed-off-by: Cindy Lu <lulu@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20200701145538.22333-14-lulu@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
