aboutsummaryrefslogtreecommitdiff
path: root/hw/vga_int.h
AgeCommit message (Collapse)Author
2012-10-20vga: remove CONFIG_BOCHS_VBEGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-10-20vga: add mmio bar to standard vgaGerd Hoffmann
This patch adds a mmio bar to the qemu standard vga which allows to access the standard vga registers and bochs dispi interface registers via mmio. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-09-05vga: ppm_save(): add error handlingLuiz Capitulino
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-07-14vga: Implement blinking of text cursorJan Kiszka
Let the text cursor blink at 1.875 Hz, the original VGA cursor frequency. No timer is used, instead we rely on the fact that the display is updated periodically. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-06-22vga: make vram size configurableGerd Hoffmann
Zap the global VGA_RAM_SIZE #define, make the vga ram size configurable for standard vga and vmware vga. cirrus and qxl are left with a fixed size (and private VGA_RAM_SIZE #define) for now. qxl needs some non-trivial adjustments in the mode list handling deal with a runtime-configurable size, which calls for a separate qxl patch. cirrus emulates cards which have 2 MB (isa) and 4 MB (pci), so I guess it would make sense to use these sizes. That change would break migration though, so I left it fixed at 8 MB size. Making it configurabls is pretty pointless for cirrus as we have to match real hardware. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-06-22vga: raise xres+yres limitsGerd Hoffmann
The vgabios will check whenever any given video mode will fit into the given video memory before adding it to the list of available modes, so there is no need to keep xmax * ymax * 32bpp lower than VGA_RAM_SIZE. Lets raise the limits a bit. Should be good for a few years, display sizes are not growing that fast. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2012-05-29vga: fix vram double-mapping with -vga std and -M pc-0.12Avi Kivity
With pc-0.12, we map the video RAM both through the PCI BAR (the guest does this) and through a fixed mapping at 0xe0000000. The memory API doesn't allow this double map, and aborts. Fix by using an alias. Reported-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-02-04vga: use constants from vga.hBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-02-04vga: move Cirrus VGA template to its own fileBlue Swirl
Standard VGA does not use vga_draw_cursor_line_* functions. Move the template to cirrus_vga_template.h. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-11vga: Convert to isa_register_portio_listRichard Henderson
[jan: fix cut'n'paste errors] [avi: adjust pci variants not to use isa functions] Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-08-22vga: Drop some unused fieldsJan Kiszka
Memory region refactorings obsoleted them. CC: Avi Kivity <avi@redhat.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-22vga: Use linear mapping + dirty logging in chain 4 memory access modeJan Kiszka
Most VGA memory access modes require MMIO handling as they demand weird logic to get a byte from or into the video RAM. However, there is one exception: chain 4 mode with all memory planes enabled for writing. This mode actually allows lineary mapping, which can then be combined with dirty logging to accelerate KVM. This patch accelerates specifically VBE accesses like they are used by grub in graphical mode. Not only the standard VGA adapter benefits from this, also vmware and spice in VGA mode. CC: Gerd Hoffmann <kraxel@redhat.com> CC: Avi Kivity <avi@redhat.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-22vmware-vga: Eliminate vga_dirty_log_restartJan Kiszka
After the conversion to the new Memory API, vga_dirty_log_restart became seriously pointless. Remove it from vmware-vga and and then finally drop the service. CC: Andrzej Zaborowski <balrogg@gmail.com> CC: Avi Kivity <avi@redhat.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-22vga: drop get_system_memory() from vga devices and derivativesAvi Kivity
Instead, use the bus accessors, or get the address space directly from the board constructor. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-08vga: simplify vga window mmio access functionsAvi Kivity
Make use of the memory API's ability to satisfy multi-byte accesses via multiple single-byte accesses. We have to keep vga_mem_{read,write}b() since they're used by cirrus. Reviewed-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-08vga: convert vga and its derivatives to the memory APIAvi Kivity
Convert all vga memory to the memory API. Note we need to fall back to get_system_memory(), since the various buses don't pass the vga window as a memory region. We no longer need to sync the dirty bitmap of the cirrus mapped memory banks, since the memory API takes care of that for us. [jan: fix vga-pci logging] Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-23vga: Fix type of lfb/map_addr/end.Richard Henderson
These addresses have been passed through pci_to_cpu_addr, and thus need to be full target_phys_addr_t. Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Richard Henderson <rth@twiddle.net> Cc: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-02-20vga-isa: convert to qdevBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-09spice: add qxl deviceGerd Hoffmann
qxl is a paravirtual graphics card. The qxl device is the bridge between the guest and the spice server (aka libspice-server). The spice server will send the rendering commands to the spice client, which will actually render them. The spice server is also able to render locally, which is done in case the guest wants read something from video memory. Local rendering is also used to support display over vnc and sdl. qxl is activated using "-vga qxl". qxl supports multihead, additional cards can be added via '-device qxl". [ v2: add copyright to files ] [ v2: use qemu-common.h for standard includes ] [ v2: create separate qxl-vga device for primary ] Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2010-11-16more stdvga cleanups.Gerd Hoffmann
video.x is gone now. It was the only user of the vga bios_offset + bios_size logic. Zap it. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2010-04-08update bochs vbe interfaceGerd Hoffmann
The bochs vbe interface got a new register a while back, which specifies the linear framebuffer size in 64k units. This patch adds support for the new register to qemu. With this patch applied vgabios 0.6c works with qemu. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-18VMware VGA: Only enable dirty log tracking when fifo is disabledAnthony Liguori
This patch enables dirty log tracking whenever it's needed and disables it when it is not. We unconditionally enable dirty log tracking on reset, restart dirty log tracking when PCI IO regions are remapped, and disable/enable it based on commands from the guest. Rebased-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-18Make sure to enable dirty tracking of VBE vram mappingAnthony Liguori
Apparently, VBE maps the VGA vram to a fixed physical location. KVM requires that all mappings of the VGA vram have dirty tracking enabled on them. Any access to the VGA vram through the VBE mapping currently fails to result in dirty page tracking updates causing a black screen. This is the true root cause of VMware VGA not working correctly under KVM and likely also an issue with some of the std-vga black screen issues too. Cirrus does not enable VBE so it would not be a problem when using Cirrus. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Rebased-by: Dave Airlie <airlied@redhat.com>
2009-11-27Revert "vga: do not resize the screen on hw_invalidate"Aurelien Jarno
This causes ctrl+alt+u or ctrl+alt+f to not work when windows hasn't been resized first. Other graphic emulators do resize the screen on hw_invalidate. This reverts commit 0bd8246bfec1dfb2eb959f52db535572c0260f4c.
2009-10-30vga roms: move loading from pc.c to vga drivers.Gerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-27vga: remove unused vga_common_save/loadJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-27vga: port vga_common_save/load to vmstateJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-27vga: create is_vbe_vmstate fieldJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-01Revert "Get rid of _t suffix"Anthony Liguori
In the very least, a change like this requires discussion on the list. The naming convention is goofy and it causes a massive merge problem. Something like this _must_ be presented on the list first so people can provide input and cope with it. This reverts commit 99a0949b720a0936da2052cb9a46db04ffc6db29. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-01Get rid of _t suffixmalc
Some not so obvious bits, slirp and Xen were left alone for the time being. Signed-off-by: malc <av1474@comtv.ru>
2009-09-09vga and cirrus_vga: create vga_ioport_invalid() and use it everywhereJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-09vga: split vga-isa-mm.oJuan Quintela
It is only used in mips softmmu, compile only there. it_shift field was only used for vga_isa_mm, move it from VGACommonState to ISAVGAMMstate. Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-09vga: export vga_mem_{read,write}Juan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-09vga: split vga_{load, save} into pci and common partsJuan Quintela
Once there adjust VGAState <-> VGACommonState Export vga_common_save/vga_common_load (nreeded by wmvare_vga Remove vga.pci_dev field, it is not needed anymore Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-09vga: export vga_ioport_{read,write}Juan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27Everything outside of vga.c should use VGACommonStateJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27Introduce vga_common_reset() to be able to typcheck vga_reset()Juan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-10qdev/prop: convert vga.c to helper macros.Gerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Message-Id:
2009-08-10vga: do not resize the screen on hw_invalidateStefano Stabellini
Hi all, currently vga always resizes the screen when vga_hw_invalidate is called while this is not required and all the other graphic emulators don't. This patch fixes it, making vga invalidate behaviour consistent with the other emulated devices. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Message-Id:
2009-05-13Remove vga_ram_sizePaul Brook
The vga_ram_size argument to machine init functions always has the same value, and is ignored by many machines (including SPARC32 which has an obsolete ifdef for VGA_RAM_SIZE). Remove it and push VGA_RAM_SIZE into vga_int.h. Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-05-08vga: Replace VGA_COMMON with a structureAvi Kivity
All VGA devices share a common field subset; currently they do so by a macro which defines the common fields inline their state structures, relying on the the common state being placed at offset 0 in the structure. This makes refactoring the code difficult and requires a lot of error prone casts. Replace the macro by a new VGACommonState structure, and the casts by regular field access and container_of() for upcasts. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-04-17vga: Cleanup dirty logging (Jan Kiszka)aliguori
In theory, there are no more quirks in the KVM slot management that requires dirty log start/stop all over the place. We just have to start the logging each time the mapping may have changed. This patch drops vga_dirty_log_stop for both standard and cirrus VGA. It also reverts #6851 as it was obviously a tribute to the old slot system. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7141 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-10Clean up VGA ram allocation.pbrook
Signed-off-by: Paul Brook <paul@codesourcery.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7063 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-07Revert r6989aliguori
There is a much more elegant fix that will follow up after this commit. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7025 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-05Fix display breakage when resizing the screen (v2) (Avi Kivity)aliguori
When the vga resolution changes, a new display surface is not allocated immediately; instead that is deferred until the next update. However, if we're running without a display client attached, that won't happen and the next bitblt is likely to cause a segfault by overflowing the display surface. Fix by reallocating the display immediately when the resolution changes. Tested with (Windows|Linux) x (cirrus|std) x (curses|sdl). Changes from v1: - fix segfault when switching virtual consoles with curses Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6989 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-16fix screendump (Stefano Stabellini)aliguori
this patch fixes the screendump functionality that was recently broken; it must be applied *after* PATCH 5, 6 and 7 of the original displaystate change patch series. In fact the other patches make much easier to solve the screendump problem because they make the console switching mechanism more robust. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6345 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-16graphical_console_init change (Stefano Stabellini)aliguori
Patch 5/7 This patch changes the graphical_console_init function to return an allocated DisplayState instead of a QEMUConsole. This patch contains just the graphical_console_init change and few other modifications mainly in console.c and vl.c. It was necessary to move the display frontends (e.g. sdl and vnc) initialization after machine->init in vl.c. This patch does *not* include any required changes to any device, these changes come with the following patches. Patch 6/7 This patch changes the QEMUMachine init functions not to take a DisplayState as an argument because is not needed any more; In few places the graphic hardware initialization function was called only if DisplayState was not NULL, now they are always called. Apart from these cases, the rest are all mechanical substitutions. Patch 7/7 This patch updates the graphic device code to use the new graphical_console_init function. As for the previous patch, in few places graphical_console_init was called only if DisplayState was not NULL, now it is always called. Apart from these cases, the rest are all mechanical substitutions. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6344 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-15DisplayState interface change (Stefano Stabellini)aliguori
This patch changes the DisplayState interface adding support for multiple frontends at the same time (sdl and vnc) and implements most of the benefit of the shared_buf patch without the added complexity. Currently DisplayState is managed by sdl (or vnc) and sdl (or vnc) is also responsible for allocating the data and setting the depth. Vga.c (or another backend) will do any necessary conversion. The idea is to change it so that is vga.c (or another backend) together with console.c that fully manage the DisplayState interface allocating data and setting the depth (either 16 or 32 bit, if the guest uses a different resolution or is in text mode, vga.c (or another backend) is in charge of doing the conversion seamlessly). The other idea is that DisplayState supports *multiple* frontends like sdl and vnc; each of them can register some callbacks to be called when a display event occurs. The interesting changes are: - the new structures and related functions in console.h and console.c in particular the following functions are very helpful to manage a DisplaySurface: qemu_create_displaysurface qemu_resize_displaysurface qemu_create_displaysurface_from qemu_free_displaysurface - console_select and qemu_console_resize in console.c this two functions manage multiple consoles on a single host display - moving code around in hw/vga.c as for the shared_buf patch this is necessary to be able to handle a dynamic DisplaySurface bpp - changes to vga_draw_graphic in hw/vga.c this is the place where the DisplaySurface buffer is shared with the videoram, when possible; Compared to the last version the only changes are: - do not remove support to dpy_copy in cirrus_vga - change the name of the displaysurface handling functions Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6336 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-05Add cirrus reset handlerblueswir1
The vga reset handler overwrites some cirrus registers, causing reboots to corrupt cirrus state to the point that guests can only bring up 640x480 resolutions. Fix by adding a dedicated cirrus reset handler (which calls the common vga handler). Signed-off-by: Avi Kivity <avi@redhat.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6191 c046a42c-6fe2-441c-8c8c-71466251a162
2008-12-01Change MMIO callbacks to use offsets, not absolute addresses.pbrook
Signed-off-by: Paul Brook <paul@codesourcery.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5849 c046a42c-6fe2-441c-8c8c-71466251a162
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-24 04:52:20 +0000