aboutsummaryrefslogtreecommitdiff
path: root/hw/vga.c
AgeCommit message (Collapse)Author
2010-07-06qemu_ram_alloc: Add DeviceState and name parametersAlex Williamson
These will be used to generate unique id strings for ramblocks. The name field is required, the device pointer is optional as most callers don't have a device. When there's no device or the device isn't a child of a bus implementing BusInfo.get_dev_path, the name should be unique for the platform. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-05-22Fix %lld or %llx printf format useBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-14vga: make some tables 'const'Blue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-04-28vga: fix typo in length passed to kvm_log_stopMarcelo Tosatti
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-04-25x86: remove dead assignments, spotted by clang analyzerBlue Swirl
Value stored is never read. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-04-08update bochs vbe interfaceGerd Hoffmann
The bochs vbe interface got a new register a while back, which specifies the linear framebuffer size in 64k units. This patch adds support for the new register to qemu. With this patch applied vgabios 0.6c works with qemu. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-01-13hw/vga.c: remove dead assignmentAmit Shah
clang-analyzer points out a redundant assignment. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-18VMware VGA: Only enable dirty log tracking when fifo is disabledAnthony Liguori
This patch enables dirty log tracking whenever it's needed and disables it when it is not. We unconditionally enable dirty log tracking on reset, restart dirty log tracking when PCI IO regions are remapped, and disable/enable it based on commands from the guest. Rebased-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-18Make sure to enable dirty tracking of VBE vram mappingAnthony Liguori
Apparently, VBE maps the VGA vram to a fixed physical location. KVM requires that all mappings of the VGA vram have dirty tracking enabled on them. Any access to the VGA vram through the VBE mapping currently fails to result in dirty page tracking updates causing a black screen. This is the true root cause of VMware VGA not working correctly under KVM and likely also an issue with some of the std-vga black screen issues too. Cirrus does not enable VBE so it would not be a problem when using Cirrus. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Rebased-by: Dave Airlie <airlied@redhat.com>
2009-11-27Revert "vga: do not resize the screen on hw_invalidate"Aurelien Jarno
This causes ctrl+alt+u or ctrl+alt+f to not work when windows hasn't been resized first. Other graphic emulators do resize the screen on hw_invalidate. This reverts commit 0bd8246bfec1dfb2eb959f52db535572c0260f4c.
2009-11-07v3: don't call reset functions on cpu initializationGlauber Costa
There is absolutely no need to call reset functions when initializing devices. Since we are already registering them, calling qemu_system_reset() should suffice. Actually, it is what happens when we reboot the machine, and using the same process instead of a special case semantics will even allow us to find bugs easier. Furthermore, the fact that we initialize things like the cpu quite early, leads to the need to introduce synchronization stuff like qemu_system_cond. This patch removes it entirely. All we need to do is call qemu_system_reset() only when we're already sure the system is up and running I tested it with qemu (with and without io-thread) and qemu-kvm, and it seems to be doing okay - although qemu-kvm uses a slightly different patch. [ v2: user mode still needs cpu_reset, so put it in ifdef. ] [ v3: leave qemu_system_cond for now. ] Signed-off-by: Glauber Costa <glommer@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-11-06vga: fix line comparisonmalc
Line counter doesn't wrap. Signed-off-by: malc <av1474@comtv.ru>
2009-11-06vga: Respect Line Compare Register in text modesmalc
Unbreaks setup screen of Act1/PL Signed-off-by: malc <av1474@comtv.ru>
2009-10-27vga: remove unused vga_common_save/loadJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-27vga: port vga_common_save/load to vmstateJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-27vga: create is_vbe_vmstate fieldJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05vga: move back dirty_log functions to vga.cJuan Quintela
They are needed there on qemu-kvm. Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-01Revert "Get rid of _t suffix"Anthony Liguori
In the very least, a change like this requires discussion on the list. The naming convention is goofy and it causes a massive merge problem. Something like this _must_ be presented on the list first so people can provide input and cope with it. This reverts commit 99a0949b720a0936da2052cb9a46db04ffc6db29. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-01Get rid of _t suffixmalc
Some not so obvious bits, slirp and Xen were left alone for the time being. Signed-off-by: malc <av1474@comtv.ru>
2009-09-11Unexport ticks_per_sec variable. Create get_ticks_per_sec() functionJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-09vga: Rename last VGAState occurrences to VGACommonStateJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-09vga and cirrus_vga: substitute switch for equivalent assigntmentJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-09vga: change tabs to spacesJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-09vga and cirrus_vga: create vga_ioport_invalid() and use it everywhereJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-09vga: split vga-isa-mm.oJuan Quintela
It is only used in mips softmmu, compile only there. it_shift field was only used for vga_isa_mm, move it from VGACommonState to ISAVGAMMstate. Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-09vga: export vga_mem_{read,write}Juan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-09vga: split isa bits inco vga-isa.cJuan Quintela
Adjust all the VGAState in VGACommonState Compile vga-isa.o in the targets that use it Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-09vga: split pci bits into vga-pci.cJuan Quintela
Adjust all the VGAState in VGACommonState Compile vga-pci.o only for targets that use it. Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-09vga: split vga_{load, save} into pci and common partsJuan Quintela
Once there adjust VGAState <-> VGACommonState Export vga_common_save/vga_common_load (nreeded by wmvare_vga Remove vga.pci_dev field, it is not needed anymore Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-09vga: export vga_ioport_{read,write}Juan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-09vga: remove useless cast from void *Juan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27Everything outside of vga.c should use VGACommonStateJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27vga: Rename vga_state -> vgaJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27Introduce vga_common_reset() to be able to typcheck vga_reset()Juan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27qdev: add return value to init() callbacks.Gerd Hoffmann
Sorry folks, but it has to be. One more of these invasive qdev patches. We have a serious design bug in the qdev interface: device init callbacks can't signal failure because the init() callback has no return value. This patch fixes it. We have already one case in-tree where this is needed: Try -device virtio-blk-pci (without drive= specified) and watch qemu segfault. This patch fixes it. With usb+scsi being converted to qdev we'll get more devices where the init callback can fail for various reasons. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-25Make CPURead/WriteFunc structure 'const'Blue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-08-24make vga screen_dump use DisplayState properlyStefano Stabellini
Hi all, currently the vga screen_dump code doesn't use the DisplayState interface properly and tries to replace it temporarily while taking the screenshot. A better approach is to register a DisplayChangeListener, call vga_hw_update, and finally write the ppm in the next call from dpy_update. Testing is appreciated. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-10qdev/prop: convert vga.c to helper macros.Gerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Message-Id:
2009-08-10vga: do not resize the screen on hw_invalidateStefano Stabellini
Hi all, currently vga always resizes the screen when vga_hw_invalidate is called while this is not required and all the other graphic emulators don't. This patch fixes it, making vga invalidate behaviour consistent with the other emulated devices. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Message-Id:
2009-07-30qdev: convert all vga devices.Gerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-27rename WORDS_BIGENDIAN to HOST_WORDS_BIGENDIANJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-20Fix most warnings (errors with -Werror) when debugging is enabledBlue Swirl
I used the following command to enable debugging: perl -p -i -e 's/^\/\/#define DEBUG/#define DEBUG/g' * */* */*/* Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-06-29Revert "Introduce reset notifier order"Jan Kiszka
This reverts commit 8217606e6edb49591b4a6fd5a0d1229cebe470a9 (and updates later added users of qemu_register_reset), we solved the problem it originally addressed less invasively. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-16Fix vga_screen_dump_blank() PPM generationEduardo Habkost
vga_screen_dump_blank() was not generating a valid PPM file: the width of the image made no sense (why it was multiplied by sizeof(uint32_t)?), and there was only one sample per pixel, instead of three. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-16Rename pci_register_io_region() to pci_register_bar()Avi Kivity
This function is used to manage a PCI BAR, so make the more generic pci_register_io_region() available to other uses. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-16Remove io_index argument from cpu_register_io_memory()Avi Kivity
The parameter is always zero except when registering the three internal io regions (ROM, unassigned, notdirty). Remove the parameter to reduce the API's power, thus facilitating future change. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-22Introduce reset notifier orderJan Kiszka
Add the parameter 'order' to qemu_register_reset and sort callbacks on registration. On system reset, callbacks with lower order will be invoked before those with higher order. Update all existing users to the standard order 0. Note: At least for x86, the existing users seem to assume that handlers are called in their registration order. Therefore, the patch preserves this property. If someone feels bored, (s)he could try to identify this dependency and express it properly on callback registration. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-13Remove vga_ram_sizePaul Brook
The vga_ram_size argument to machine init functions always has the same value, and is ignored by many machines (including SPARC32 which has an obsolete ifdef for VGA_RAM_SIZE). Remove it and push VGA_RAM_SIZE into vga_int.h. Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-05-03use PCI_HEADER_TYPE.Isaku Yamahata
use symbolic value instead of 0x0e and related value. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
2009-04-27[RESEND] Fix vga segfaults or screen corruption with large memory guestsAvi Kivity
page0 and friends are ram addresses; a smaller size will overflow and cause a segfault or random corruption. Change them to ram_addr_t. Signed-off-by: Avi Kivity <avi@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-25 20:37:29 +0000