aboutsummaryrefslogtreecommitdiff
path: root/hw/usb
AgeCommit message (Collapse)Author
2013-06-03xhci: add live migration supportGerd Hoffmann
With all preparing pieces in place we can finally drop in the vmstate structs and the postload function. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-06-03xhci: add xhci_init_epctxGerd Hoffmann
Factor out endpoint context initialization to a separate function. xhci live migration will need that too, in post_load. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-06-03xhci: add xhci_alloc_epctxGerd Hoffmann
Factor out endpoint context allocation to a separate function. xhci live migration will need that too, in post_load. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-06-03xhci: add XHCISlot->addressedGerd Hoffmann
Preparing for live-migration support, post_load will need that. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-06-03host-libusb: Correct test for USB packet stateEd Maste
USB_RET_ASYNC is -6, so inflight was always false. Signed-off-by: Ed Maste <emaste@freebsd.org> Cc: qemu-stable@nongnu.org Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-06-03Fix usage of USB_DEV_FLAG_IS_HOST flag.Michael Marineau
USB_DEV_FLAG_IS_HOST is the bit number, not value. Booting with a "Fitbit Base Station" USB dongle was triggering this assert. Signed-off-by: Michael Marineau <mike@marineau.org> Cc: qemu-stable@nongnu.org Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-05-12remove double semicolonsDong Xu Wang
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-05-07xhci: handle USB_RET_BABBLEGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-05-07uhci: Use an intermediate buffer for usb packet dataHans de Goede
Due to various unfortunate reasons we cannot reliable detect a guest cancelling a packet as soon as it happens, instead we detect cancels with some delay. When packets are handled async, and we directly pass the guest memory for the packet to the usb-device as iovec, this means that the usb-device can write to guest-memory which the guest has already re-used for other purposes -> not good! This patch fixes this by adding an intermediate buffer and writing back not only the result, but also the data, of async completed packets when scanning the schedule. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-05-07usb-host: add usb_host_full_speed_compatGerd Hoffmann
Alloes to pass through usb2 devices on usb1 host controllers if possible. Brings the libusb implementation to feature-parity with the linux usbfs code, so the usb-host implementation in 1.5 (libusb) doesn't regress compared to 1.4 (usbfs). Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-05-07usb-host: live migration support for the libusb versionGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-05-03scsi: add bus_name parameter to scsi_bus_new.KONRAD Frederic
This adds the possibility to create a scsi-bus with a specified name. Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com> Message-id: 1367330931-12994-4-git-send-email-fred.konrad@greensocs.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-29audio: remove the need for audio card CONFIG_* symbolsPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1366303444-24620-3-git-send-email-pbonzini@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-27ccid: Fix crash when backend isn't specifiedCole Robinson
Reproducer: ./x86_64-softmmu/qemu-system-x86_64 -device usb-ccid,id=ccid0 -usb -device ccid-card-emulated -monitor stdio Signed-off-by: Cole Robinson <crobinso@redhat.com> Reviewed-by: Alon Levy <alevy@redhat.com>
2013-04-24dev-smartcard-reader: empty implementation for Mechanical (fail correctly)Alon Levy
Signed-off-by: Alon Levy <alevy@redhat.com> Reviewed-by: Marc-André Lureau <mlureau@redhat.com>
2013-04-24dev-smartcard-reader: copy atr protocol to ccid parametersAlon Levy
Adds todos. Signed-off-by: Alon Levy <alevy@redhat.com> Reviewed-by: Marc-André Lureau <mlureau@redhat.com>
2013-04-24dev-smartcard-reader: change default protocol to T=0Alon Levy
We don't support T=1 so we shouldn't advertise it by default. Two independent changes: * Default ATR sets T=0. This gets overwritten by the client provided ATR later. * Class descriptor changes dwAdvertise dwProtocols.PPPP to 0x1 and dwProtocols.RRRR=0 per spec. Signed-off-by: Alon Levy <alevy@redhat.com> Reviewed-by: Marc-André Lureau <mlureau@redhat.com>
2013-04-24dev-smartcard-reader: define structs for CCID_Parameter internalsAlon Levy
Signed-off-by: Alon Levy <alevy@redhat.com> Reviewed-by: Marc-André Lureau <mlureau@redhat.com>
2013-04-24ccid-card-passthru, dev-smartcard-reader: add debug environment variablesAlon Levy
Introduces a new utility function: parse_debug_env to avoid code duplication. This overrides whatever debug value is set on the corresponding devices from the command line, and is meant to ease the usage with any management stack. For libvirt you can set environment variables by extending the dom namespace, i.e: <domain type='kvm' id='3' xmlns:qemu='http://libvirt.org/schemas/domain/qemu/1.0'> <qemu:commandline> <qemu:env name='QEMU_CCID_PASSTHRU_DEBUG' value='4'/> <qemu:env name='QEMU_CCID_DEBUG' value='4'/> </qemu:commandline> </domain> Signed-off-by: Alon Levy <alevy@redhat.com> Reviewed-by: Marc-André Lureau <mlureau@redhat.com>
2013-04-24ccid-card-passthru: add atr checkAlon Levy
Signed-off-by: Alon Levy <alevy@redhat.com> Reviewed-by: Marc-André Lureau <mlureau@redhat.com>
2013-04-24dev-smartcard-reader: reuse usb.h definitionsAlon Levy
Signed-off-by: Alon Levy <alevy@redhat.com> Reviewed-by: Marc-André Lureau <mlureau@redhat.com>
2013-04-24dev-smartcard-reader: support windows guestAlon Levy
By not advertising USB wakeup support (which we don't). Signed-off-by: Alon Levy <alevy@redhat.com> Reviewed-by: Marc-André Lureau <mlureau@redhat.com>
2013-04-24dev-smartcard-reader: remove aborts (never triggered, but just in case)Alon Levy
Signed-off-by: Alon Levy <alevy@redhat.com> Reviewed-by: Marc-André Lureau <mlureau@redhat.com>
2013-04-24dev-smartcard-reader: nicer debug messagesAlon Levy
Signed-off-by: Alon Levy <alevy@redhat.com> Reviewed-by: Marc-André Lureau <mlureau@redhat.com>
2013-04-24dev-smartcard-reader: white space fixesAlon Levy
Signed-off-by: Alon Levy <alevy@redhat.com> Reviewed-by: Marc-André Lureau <mlureau@redhat.com>
2013-04-24ccid: declare DEFAULT_ATR table to be "static const"Jim Meyering
Signed-off-by: Jim Meyering <meyering@redhat.com> Reviewed-by: Alon Levy <alevy@redhat.com> Reviewed-by: Marc-André Lureau <mlureau@redhat.com>
2013-04-24ccid: make backend_enum_table "static const" and adjust usersJim Meyering
Signed-off-by: Jim Meyering <meyering@redhat.com> Reviewed-by: Alon Levy <alevy@redhat.com> Reviewed-by: Marc-André Lureau <mlureau@redhat.com>
2013-04-24ccid-card-emul: do not crash if backend is not providedMarc-André Lureau
Program received signal SIGSEGV, Segmentation fault. __strcmp_sse42 () at ../sysdeps/x86_64/multiarch/strcmp-sse42.S:164 164 movdqu (%rsi), %xmm2 (gdb) bt at /home/elmarco/320g/src/qemu/hw/ccid-card-emulated.c:477 at /home/elmarco/320g/src/qemu/hw/ccid-card-emulated.c:503 Signed-off-by: Marc-André Lureau <mlureau@redhat.com> Reviewed-by: Alon Levy <alevy@redhat.com>
2013-04-23usb-host: raise libusbx minimum version to 1.0.13Gerd Hoffmann
Allows to remove one FIXME. Makes LIBUSB_LOG_LEVEL_WARNING build errors go away. And starting with that version libusb has a LIBUSBX_API_VERSION define which allows to easily #ifdef version dependencies should that need arrive in the future. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-04-23usb: better speed mismatch error reportingGerd Hoffmann
Report the supported speeds for device and port in the error message. Also add the speeds to the tracepoint. And while being at it drop the redundant error message in usb_desc_attach, usb_device_attach will report the error anyway. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-04-23ehci_free_packet: Discard finished packets when the queue is haltedHans de Goede
With pipelining it is possible to encounter a finished packet when cleaning the queue due to a halt. This happens when a non stall error happens while talking to a real device. In this case the queue on the usb-host side will continue processing packets, and we can have completed packets waiting in the queue after an error condition packet causing a halt. There are 2 reasons to discard the completed packets at this point, rather then trying to writing them back to the guest: 1) The guest expect to be able to cancel and/or change packets after the packet with the error without doing an unlink, so writing them back may confuse the guest. 2) Since the queue does not advance when halted, the writing back of these packets will fail anyways since p->qtdaddr != q->qtdaddr, so the ehci_verify_qtd call in ehci_writeback_async_complete_packet will fail. Note that 2) means that then only functional change this patch introduces is the printing of a warning when this scenario happens. Note that discarding these packets means that the guest driver and the device will get out of sync! This is unfortunate, but should not be a problem since with a non stall error (iow an io-error) the 2 are out of sync already anyways. Still this patch adds a warning to signal this happening. Note that sofar this has only been seen with a DVB-T receiver, which gives of a MPEG-2 stream, which allows for recovering from lost packets, see: https://bugzilla.redhat.com/show_bug.cgi?id=890320 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-04-23xhci: remove XHCIRing->base (unused)Gerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-04-16use libusb for usb-hostGerd Hoffmann
Reimplement usb-host on top of libusb. Reasons to do this: (1) Largely rewritten from scratch, nice opportunity to kill historical cruft. (2) Offload usbfs handling to libusb. (3) Have a single portable code base instead of bsd + linux variants. (4) Bring usb-host support to any platform supported by libusbx. For now this goes side-by-side to the existing code. That is only to simplify regression testing though, at the end of the day I want remove the old code and support libusb exclusively. Merge early in 1.5 cycle, remove the old code after 1.5 release or something like this. Thanks to qdev the old and new code can coexist nicely on linux. Just use "-device usb-host-linux" to use the old linux driver instead of the libusb one (which takes over the "usb-host" name). The bsd driver isn't qdev'ified so it isn't that easy for bsd. I didn't bother making it runtime switchable, so you have to rebuild qemu with --disable-libusb to get back the old code. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-04-16xhci: fix address deviceGerd Hoffmann
Zero-initialize the set-address dummy USBPacket, also add buffer to avoid sanity checks triggering. https://bugzilla.redhat.com/show_bug.cgi?id=929019 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-04-16xhci: use slotid as device addressGerd Hoffmann
Is good enougth for unique device addresses and avoids the need for any state for device addressing. Makes live migration support easier. Also makes device->slot lookups trivial. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-04-16xhci: fix portsc writesGerd Hoffmann
Check for port reset first and skip everything else then. Add sanity checks for PLS updates. Add PLC notification when entering PLS_U0 state. This gets host-initiated port resume going on win8. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-04-16xhci: add xhci_cap_writeGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-04-16xhci: remove leftover debug printfGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-04-16usb-serial: Remove double call to qemu_chr_add_handlers( NULL )Hans de Goede
usb-serial has a qdev chardev property, and hw/qdev-properties-system.c already contains: static void release_chr(Object *obj, const char *name, void *opaque) { DeviceState *dev = DEVICE(obj); Property *prop = opaque; CharDriverState **ptr = qdev_get_prop_ptr(dev, prop); CharDriverState *chr = *ptr; if (chr) { qemu_chr_add_handlers(chr, NULL, NULL, NULL, NULL); qemu_chr_fe_release(chr); } } So doing the qemu_chr_add_handlers(s->cs, NULL, NULL, NULL, NULL); from the usb handle_destroy function too will lead to it being done twice. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-04-15include: avoid useless includes of exec/ headersPaolo Bonzini
Headers in include/exec/ are for the deepest innards of QEMU, they should almost never be included directly. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-15sysemu: avoid proliferation of include/ subdirectoriesPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08Merge remote-tracking branch 'bonzini/hw-dirs' into stagingAnthony Liguori
# By Paolo Bonzini # Via Paolo Bonzini * bonzini/hw-dirs: (35 commits) hw: move private headers to hw/ subdirectories. MAINTAINERS: update for source code movement hw: move last file to hw/arm/ hw: move hw/kvm/ to hw/i386/kvm hw: move ARM CPU cores to hw/cpu/, configure with default-configs/ hw: move other devices to hw/misc/, configure with default-configs/ hw: move NVRAM interfaces to hw/nvram/, configure with default-configs/ hw: move GPIO interfaces to hw/gpio/, configure with default-configs/ hw: move interrupt controllers to hw/intc/, configure with default-configs/ hw: move DMA controllers to hw/dma/, configure with default-configs/ hw: move VFIO and ivshmem to hw/misc/ hw: move PCI bridges to hw/pci-* or hw/ARCH hw: move SD/MMC devices to hw/sd/, configure with default-configs/ hw: move timer devices to hw/timer/, configure with default-configs/ hw: move ISA bridges and devices to hw/isa/, configure with default-configs/ hw: move char devices to hw/char/, configure via default-configs/ hw: move more files to hw/xen/ hw: move SCSI controllers to hw/scsi/, configure via default-configs/ hw: move SSI controllers to hw/ssi/, configure via default-configs/ hw: move I2C controllers to hw/i2c/, configure via default-configs/ ... Message-id: 1365442249-18259-1-git-send-email-pbonzini@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-08hw: move private headers to hw/ subdirectories.Paolo Bonzini
Many headers are used only in a single directory. These can be kept in hw/. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: make all of hw/usb/ configurable via default-configs/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move target-independent files to subdirectoriesPaolo Bonzini
This patch tackles all files that are compiled once, moving them to subdirectories of hw/. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move headers to include/Paolo Bonzini
Many of these should be cleaned up with proper qdev-/QOM-ification. Right now there are many catch-all headers in include/hw/ARCH depending on cpu.h, and this makes it necessary to compile these files per-target. However, fixing this does not belong in these patches. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08Merge remote-tracking branch 'kraxel/usb.79' into stagingAnthony Liguori
# By Gerd Hoffmann (7) and Hans de Goede (3) # Via Gerd Hoffmann * kraxel/usb.79: usb-tablet: Don't claim wakeup capability for USB-2 version usb: update docs for bus name change usb-hub: report status changes only once usb-hub: limit chain length xhci: zap unused name field xhci: remove unimplemented printfs xhci: remove leftover debug printf xhci: fix numintrs sanity checks usb-redir: Add flow control support usb-redir: Fix crash on migration with no client connected
2013-04-05usb-storage: Forward serial number to scsi-diskKevin Wolf
usb-storage takes care to fetch the USB serial number from -drive options, but it neglected to pass its own 'serial' property to the scsi-disk it creates. With this patch, the 'serial' qdev property and the 'serial' option in -drive behave the same and correctly apply the serial number on both USB and SCSI level. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com>
2013-04-03usb-tablet: Don't claim wakeup capability for USB-2 versionHans de Goede
Our ehci code does not implement wakeup support, so claiming support for it with usb-tablet in USB-2 mode causes all tablet events to get lost. http://bugzilla.redhat.com/show_bug.cgi?id=929068 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-04-03usb-hub: report status changes only onceGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-01-01 17:30:43 +0000