aboutsummaryrefslogtreecommitdiff
path: root/hw/usb
AgeCommit message (Collapse)Author
2013-08-01usb-redir: fix use-after-freeGerd Hoffmann
Reinitialize dev->cs to NULL after deleting it, to make sure it isn't used afterwards. Reported-by: Martin Cerveny <M.Cerveny@computer.org> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-08-01xhci: fix segfaultGerd Hoffmann
Guest trying to reset a endpoint of a disconnected device resulted in xhci trying to dereference uport while being NULL, thereby crashing qemu. Fix that by adding a check. Drop unused dev variable while touching that code bit. Cc: qemu-stable@nongnu.org Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-07-30hcd-ohci: add dma error handlingAlexey Kardashevskiy
Current hcd-ohci does not handle DMA errors. However they may happen so here we introduce simple error handling. On such errors, a typical OHCI will stop operating, signal the guest about the error by sending "UnrecoverableError Event", set itself into error state and set "Detected Parity Error" in its PCI config space to signal that it got an error and so does the patch. This also adds ohci_die() call to ohci_bus_start() to handle possible failure of qemu_new_timer_ns(). Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-07-30uhci: egsm fixGerd Hoffmann
When the guest goes suspend the uhci controller while there are pending resume requests on the ports go signal global resume instantly. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-07-30xhci: handle USB_RET_IOERRORGerd Hoffmann
https://bugzilla.redhat.com/show_bug.cgi?id=980377 Cc: qemu-stable@nongnu.org Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-07-29devices: Associate devices to their logical categoryMarcel Apfelbaum
The category will be used to sort the devices displayed in the command line help. Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com> Message-id: 1375107465-25767-4-git-send-email-marcel.a@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-27misc: Use g_assert_not_reached for code which is expected to be unreachableStefan Weil
The macro g_assert_not_reached is a better self documenting replacement for assert(0) or assert(false). Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-07-23scsi: Improve error propagation for scsi_bus_legacy_handle_cmdline()Andreas Färber
Let scsi_bus_legacy_add_drive() and scsi_bus_legacy_handle_cmdline() return an Error**. Prepare qdev initfns for QOM realize error model. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-23ohci: Use QOM realize for OHCIHu Tao
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-23ohci: QOM'ify some moreHu Tao
Introduce type constant and avoid DO_UPCAST(). Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> [AF: Avoid remaining OHCIPCIState::pci_dev uses, rename parent fields] Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-23usb/hcd-xhci: QOM parent field cleanupAndreas Färber
Replace direct uses of XHCIState::pci_dev with QOM casts and rename it to parent_obj. Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-23usb/hcd-xhci: QOM Upcast SweepPeter Crosthwaite
Define and use standard QOM cast macro. Remove usages of DO_UPCAST() and direct -> style upcasting. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> [AF: Dropped usb_xhci_init() DeviceState argument and renamed variable] Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-23hw: Avoid use of QOM type name macros in VMStateDescriptionsPeter Maydell
The name field in a VMStateDescription is part of the migration state versioning, so changing it will break migration. It's therefore a bad idea to use a QOM typename macro to initialize it, because in general we're free to rename QOM types as part of code refactoring and cleanup. For the handful of devices that were doing this by mistake, replace the QOM typenames with the corresponding literal strings. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> [AF: Use TYPE_PVSCSI for TypeInfo instead] Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-04hw/[u-x]*: pass owner to memory_region_init* functionsPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-04memory: add owner argument to initialization functionsPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-04dma: keep a device alive while it has SGListsPaolo Bonzini
Reviewed-by: Anthony Liguori <aliguori@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-06-24usb: add serial bus propertyGerd Hoffmann
This patch adds a serial property for all usb devices, which can be used to set the serial number of a usb device (as listed by lsusb -v) to a specific value. Applies to emulated devices only. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-06-24usb-host-libusb: set USB_DEV_FLAG_IS_HOSTGerd Hoffmann
... like host-{linux,bsd}.c do. Cc: qemu-stable@nongnu.org Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-06-24usb/host-libusb: Fix building with libusb git master codeHans de Goede
The next libusb release will deprecate libusb_get_port_path, and since we compile with -Werror, this breaks the build. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-06-24usb/hcd-ehci: Add Faraday FUSBH200 supportKuo-Jung Su
Add Faraday FUSBH200 support, which is slightly different from EHCI spec. (Or maybe simply a bad/wrong implementation...) Signed-off-by: Kuo-Jung Su <dantesu@faraday-tech.com> Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-06-24usb/hcd-ehci: Replace PORTSC macros with variablesKuo-Jung Su
Replace PORTSC macros with variables which could then be configured in ehci_xxxx_class_init(...) Signed-off-by: Kuo-Jung Su <dantesu@faraday-tech.com> Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-06-24usb/hcd-ehci: Add Tegra2 SysBus EHCI deviceAndreas Färber
This prepares an EHCI device for the Nvidia Tegra2 SoC family. Values based on patch by Vincent Palatin and verified against TRM v01p. Cc: Vincent Palatin <vpalatin@chromium.org> Signed-off-by: Andreas Färber <andreas.faerber@web.de> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-06-24usb/hcd-ehci: Split off instance_init from realizeAndreas Färber
This makes the mem MemoryRegion available to derived instance_inits. Keep the bus in realize for now since naming breaks in instance_init. Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-06-24usb/hcd-ehci-sysbus: Convert to QOM realizeAndreas Färber
The SysBus qdev initfn merely calls SysBusDeviceClass::init, so we can replace it with a realizefn already. This avoids getting into any initfn ambiguity with the upcoming Faraday EHCI implementation. Rename internal usb_ehci_initfn() to usb_ehci_realize() to allow to return Errors from common initialization code as well. Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-06-20dma: eliminate DMAContextPaolo Bonzini
The DMAContext is a simple pointer to an AddressSpace that is now always already available. Make everyone hold the address space directly, and clean up the DMA API to use the AddressSpace directly. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-06-03xhci: add live migration supportGerd Hoffmann
With all preparing pieces in place we can finally drop in the vmstate structs and the postload function. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-06-03xhci: add xhci_init_epctxGerd Hoffmann
Factor out endpoint context initialization to a separate function. xhci live migration will need that too, in post_load. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-06-03xhci: add xhci_alloc_epctxGerd Hoffmann
Factor out endpoint context allocation to a separate function. xhci live migration will need that too, in post_load. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-06-03xhci: add XHCISlot->addressedGerd Hoffmann
Preparing for live-migration support, post_load will need that. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-06-03host-libusb: Correct test for USB packet stateEd Maste
USB_RET_ASYNC is -6, so inflight was always false. Signed-off-by: Ed Maste <emaste@freebsd.org> Cc: qemu-stable@nongnu.org Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-06-03Fix usage of USB_DEV_FLAG_IS_HOST flag.Michael Marineau
USB_DEV_FLAG_IS_HOST is the bit number, not value. Booting with a "Fitbit Base Station" USB dongle was triggering this assert. Signed-off-by: Michael Marineau <mike@marineau.org> Cc: qemu-stable@nongnu.org Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-05-12remove double semicolonsDong Xu Wang
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-05-07xhci: handle USB_RET_BABBLEGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-05-07uhci: Use an intermediate buffer for usb packet dataHans de Goede
Due to various unfortunate reasons we cannot reliable detect a guest cancelling a packet as soon as it happens, instead we detect cancels with some delay. When packets are handled async, and we directly pass the guest memory for the packet to the usb-device as iovec, this means that the usb-device can write to guest-memory which the guest has already re-used for other purposes -> not good! This patch fixes this by adding an intermediate buffer and writing back not only the result, but also the data, of async completed packets when scanning the schedule. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-05-07usb-host: add usb_host_full_speed_compatGerd Hoffmann
Alloes to pass through usb2 devices on usb1 host controllers if possible. Brings the libusb implementation to feature-parity with the linux usbfs code, so the usb-host implementation in 1.5 (libusb) doesn't regress compared to 1.4 (usbfs). Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-05-07usb-host: live migration support for the libusb versionGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-05-03scsi: add bus_name parameter to scsi_bus_new.KONRAD Frederic
This adds the possibility to create a scsi-bus with a specified name. Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com> Message-id: 1367330931-12994-4-git-send-email-fred.konrad@greensocs.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-29audio: remove the need for audio card CONFIG_* symbolsPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1366303444-24620-3-git-send-email-pbonzini@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-27ccid: Fix crash when backend isn't specifiedCole Robinson
Reproducer: ./x86_64-softmmu/qemu-system-x86_64 -device usb-ccid,id=ccid0 -usb -device ccid-card-emulated -monitor stdio Signed-off-by: Cole Robinson <crobinso@redhat.com> Reviewed-by: Alon Levy <alevy@redhat.com>
2013-04-24dev-smartcard-reader: empty implementation for Mechanical (fail correctly)Alon Levy
Signed-off-by: Alon Levy <alevy@redhat.com> Reviewed-by: Marc-André Lureau <mlureau@redhat.com>
2013-04-24dev-smartcard-reader: copy atr protocol to ccid parametersAlon Levy
Adds todos. Signed-off-by: Alon Levy <alevy@redhat.com> Reviewed-by: Marc-André Lureau <mlureau@redhat.com>
2013-04-24dev-smartcard-reader: change default protocol to T=0Alon Levy
We don't support T=1 so we shouldn't advertise it by default. Two independent changes: * Default ATR sets T=0. This gets overwritten by the client provided ATR later. * Class descriptor changes dwAdvertise dwProtocols.PPPP to 0x1 and dwProtocols.RRRR=0 per spec. Signed-off-by: Alon Levy <alevy@redhat.com> Reviewed-by: Marc-André Lureau <mlureau@redhat.com>
2013-04-24dev-smartcard-reader: define structs for CCID_Parameter internalsAlon Levy
Signed-off-by: Alon Levy <alevy@redhat.com> Reviewed-by: Marc-André Lureau <mlureau@redhat.com>
2013-04-24ccid-card-passthru, dev-smartcard-reader: add debug environment variablesAlon Levy
Introduces a new utility function: parse_debug_env to avoid code duplication. This overrides whatever debug value is set on the corresponding devices from the command line, and is meant to ease the usage with any management stack. For libvirt you can set environment variables by extending the dom namespace, i.e: <domain type='kvm' id='3' xmlns:qemu='http://libvirt.org/schemas/domain/qemu/1.0'> <qemu:commandline> <qemu:env name='QEMU_CCID_PASSTHRU_DEBUG' value='4'/> <qemu:env name='QEMU_CCID_DEBUG' value='4'/> </qemu:commandline> </domain> Signed-off-by: Alon Levy <alevy@redhat.com> Reviewed-by: Marc-André Lureau <mlureau@redhat.com>
2013-04-24ccid-card-passthru: add atr checkAlon Levy
Signed-off-by: Alon Levy <alevy@redhat.com> Reviewed-by: Marc-André Lureau <mlureau@redhat.com>
2013-04-24dev-smartcard-reader: reuse usb.h definitionsAlon Levy
Signed-off-by: Alon Levy <alevy@redhat.com> Reviewed-by: Marc-André Lureau <mlureau@redhat.com>
2013-04-24dev-smartcard-reader: support windows guestAlon Levy
By not advertising USB wakeup support (which we don't). Signed-off-by: Alon Levy <alevy@redhat.com> Reviewed-by: Marc-André Lureau <mlureau@redhat.com>
2013-04-24dev-smartcard-reader: remove aborts (never triggered, but just in case)Alon Levy
Signed-off-by: Alon Levy <alevy@redhat.com> Reviewed-by: Marc-André Lureau <mlureau@redhat.com>
2013-04-24dev-smartcard-reader: nicer debug messagesAlon Levy
Signed-off-by: Alon Levy <alevy@redhat.com> Reviewed-by: Marc-André Lureau <mlureau@redhat.com>
2013-04-24dev-smartcard-reader: white space fixesAlon Levy
Signed-off-by: Alon Levy <alevy@redhat.com> Reviewed-by: Marc-André Lureau <mlureau@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-30 00:27:18 +0000