aboutsummaryrefslogtreecommitdiff
path: root/hw/usb/host-libusb.c
AgeCommit message (Collapse)Author
2014-11-12usb-host: fix usb_host_speed_compat tyopsGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Gonglei <arei.gonglei@huawei.com>
2014-11-11Provide the missing LIBUSB_LOG_LEVEL_* for older libusb or FreeBSD. ↵Chris Johns
Providing just the needed value as a defined. Signed-off-by: Chris Johns <chrisj@rtems.org> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-10-15bootindex: move calling add_boot_device_patch to bootindex setter functionGonglei
On this way, we can assure the new bootindex take effect during vm rebooting. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-10-15host-libusb: remove bootindex property from qdev to qomGonglei
Remove bootindex form qdev property to qom, things will continue to work just fine, and we can use qom features which are not supported by qdev property. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-09-23libusb: using error_report instead of fprintfGonglei
Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-09-23libusb: convert init to realizeGonglei
In this way, all the implementations now use error_setg instead of error_report for reporting error. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-09-23usb-bus: convert USBDeviceClass init to realizeGonglei
Add "realize/unrealize" in USBDeviceClass, which has errp as a parameter. So all the implementations now use error_setg instead of error_report for reporting error. Note: this patch still keep "init" in USBDeviceClass, and call kclass->init in usb_device_realize(), avoid breaking git bisect. After realize all usb devices, will be removed. Signed-off-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-07-01usb: initialize libusb_device to avoid crashJincheng Miao
If libusb_get_device_list() fails, the uninitialized local variable libusb_device would be passed to libusb_free_device_list(), that will cause a crash, like: (gdb) bt #0 0x00007fbbb4bafc10 in pthread_mutex_lock () from /lib64/libpthread.so.0 #1 0x00007fbbb233e653 in libusb_unref_device (dev=0x6275682d627375) at core.c:902 #2 0x00007fbbb233e739 in libusb_free_device_list (list=0x7fbbb6e8436e, unref_devices=<optimized out>) at core.c:653 #3 0x00007fbbb6cd80a4 in usb_host_auto_check (unused=unused@entry=0x0) at hw/usb/host-libusb.c:1446 #4 0x00007fbbb6cd8525 in usb_host_initfn (udev=0x7fbbbd3c5670) at hw/usb/host-libusb.c:912 #5 0x00007fbbb6cc123b in usb_device_init (dev=0x7fbbbd3c5670) at hw/usb/bus.c:106 ... So initialize libusb_device at the begin time. Signed-off-by: Jincheng Miao <jmiao@redhat.com> Reviewed-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-06-13usb-host: add range checks for usb-host parametersGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-06-02usb-host: add HAVE_STREAMS defineGerd Hoffmann
2014-06-02usb-host: allow attaching usb3 devices to ehciGerd Hoffmann
Extend compatibility test function to also figure whenever usb3 devices can be supported on ehci. Tweak ep0 maxpacketsize field due to usb2 <-> usb3 difference. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-05-26usb-host-libusb: Set stream id when submitting bulk-stream transfersHans de Goede
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-05-26usb-host-libusb: Add alloc / free streams opsHans de Goede
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-05-26usb-host-libusb: Fill in endpoint max_streams when availableHans de Goede
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2014-02-14qdev: Remove hex8/32/64 property typesPaolo Bonzini
Replace them with uint8/32/64. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-10-22usb-host-libusb: Detach kernel drivers earlierHans de Goede
If we detach the kernel drivers on the first set_config, then they will be still attached when the device gets its initial reset. Causing the drivers to re-initialize the device after the reset, dirtying the device state. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-10-22usb-host-libusb: Configuration 0 may be a valid configurationHans de Goede
Quoting from: linux/Documentation/ABI/stable/sysfs-bus-usb: Note that some devices, in violation of the USB spec, have a configuration with a value equal to 0. Writing 0 to bConfigurationValue for these devices will install that configuration, rather then unconfigure the device. So don't compare the configuration value against 0 to check for unconfigured devices, instead check for a LIBUSB_ERROR_NOT_FOUND return from libusb_get_active_config_descriptor(). Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-10-22usb-host-libusb: Fix reset handlingHans de Goede
The guest will issue an initial device reset when the device is attached, but since the current usb-host-libusb code only actually does the reset when udev->configuration != 0, and on attach the device is not yet configured, the reset gets ignored. This means that the device gets passed to the guest in an unknown state, which is not good. The udev->configuration check is there because of the release / claim interfaces done around the libusb_device_reset call, but these are not necessary. If interfaces are claimed when libusb_device_reset gets called libusb will release + reclaim them itself. The usb_host_ep_update call also is not necessary. If the reset succeeds the original config and interface alt settings will be restored. Last if the reset fails, that means the device has either disconnected or morphed into an another device and has been completely re-enumerated, so it is treated by the host as a new device and our handle is invalid, so on reset failure we need to call usb_host_nodev(). Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-08-22aio / timers: Switch entire codebase to the new timer APIAlex Bligh
This is an autogenerated patch using scripts/switch-timer-api. Switch the entire code base to using the new timer API. Note this patch may introduce some line length issues. Signed-off-by: Alex Bligh <alex@alex.org.uk> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-07-29devices: Associate devices to their logical categoryMarcel Apfelbaum
The category will be used to sort the devices displayed in the command line help. Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com> Message-id: 1375107465-25767-4-git-send-email-marcel.a@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-06-24usb-host-libusb: set USB_DEV_FLAG_IS_HOSTGerd Hoffmann
... like host-{linux,bsd}.c do. Cc: qemu-stable@nongnu.org Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-06-24usb/host-libusb: Fix building with libusb git master codeHans de Goede
The next libusb release will deprecate libusb_get_port_path, and since we compile with -Werror, this breaks the build. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-06-03host-libusb: Correct test for USB packet stateEd Maste
USB_RET_ASYNC is -6, so inflight was always false. Signed-off-by: Ed Maste <emaste@freebsd.org> Cc: qemu-stable@nongnu.org Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-05-07usb-host: add usb_host_full_speed_compatGerd Hoffmann
Alloes to pass through usb2 devices on usb1 host controllers if possible. Brings the libusb implementation to feature-parity with the linux usbfs code, so the usb-host implementation in 1.5 (libusb) doesn't regress compared to 1.4 (usbfs). Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-05-07usb-host: live migration support for the libusb versionGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-04-23usb-host: raise libusbx minimum version to 1.0.13Gerd Hoffmann
Allows to remove one FIXME. Makes LIBUSB_LOG_LEVEL_WARNING build errors go away. And starting with that version libusb has a LIBUSBX_API_VERSION define which allows to easily #ifdef version dependencies should that need arrive in the future. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-04-16use libusb for usb-hostGerd Hoffmann
Reimplement usb-host on top of libusb. Reasons to do this: (1) Largely rewritten from scratch, nice opportunity to kill historical cruft. (2) Offload usbfs handling to libusb. (3) Have a single portable code base instead of bsd + linux variants. (4) Bring usb-host support to any platform supported by libusbx. For now this goes side-by-side to the existing code. That is only to simplify regression testing though, at the end of the day I want remove the old code and support libusb exclusively. Merge early in 1.5 cycle, remove the old code after 1.5 release or something like this. Thanks to qdev the old and new code can coexist nicely on linux. Just use "-device usb-host-linux" to use the old linux driver instead of the libusb one (which takes over the "usb-host" name). The bsd driver isn't qdev'ified so it isn't that easy for bsd. I didn't bother making it runtime switchable, so you have to rebuild qemu with --disable-libusb to get back the old code. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-21 01:52:30 +0000