| Age | Commit message (Collapse) | Author |
|---|
|
Reorganize usb source files. Create a new hw/usb/ directory and move
all usb source code to that place. Also make filenames a bit more
descriptive. Host adapters are prefixed with "hch-" now, usb device
emulations are prefixed with "dev-". Fixup paths Makefile and include
paths to make it compile. No code changes.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
* kraxel/usb.38: (28 commits)
xhci: handle USB_RET_NAK
xhci: remote wakeup support
xhci: kill port arg from xhci_setup_packet
xhci: stop on errors
xhci: add trb type name lookup support.
xhci: signal low- and fullspeed support
usb: add USBBusOps->wakeup_endpoint
usb: pass USBEndpoint to usb_wakeup
usb: maintain async packet list per endpoint
usb: Set USBEndpoint in usb_packet_setup().
usb: add USBEndpoint->{nr,pid}
usb: USBPacket: add status, rename owner -> ep
usb: fold usb_generic_handle_packet into usb_handle_packet
usb: kill handle_packet callback
usb-xhci: switch to usb_find_device()
usb-musb: switch to usb_find_device()
usb-ohci: switch to usb_find_device()
usb-ehci: switch to usb_find_device()
usb-uhci: switch to usb_find_device()
usb: handle dev == NULL in usb_handle_packet()
...
|
|
Replace device_init() with generalized type_init().
While at it, unify naming convention: type_init([$prefix_]register_types)
Also, type_init() is a function, so add preceding blank line where
necessary and don't put a semicolon after the closing brace.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Cc: Anthony Liguori <anthony@codemonkey.ws>
Cc: malc <av1474@comtv.ru>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
With the separation of the device lookup (via usb_find_device) and
packet processing we can lookup device and endpoint before setting up
the usb packet. So we can initialize USBPacket->ep early and keep it
valid for the whole lifecycle of the USBPacket. Also the devaddr and
devep fields are not needed any more.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
All drivers except usb-hub use usb_generic_handle_packet. The only
reason the usb hub has its own function is that it used to be called
with packets which are intended for downstream devices. With the new,
separate device lookup step this doesn't happen any more, so the need
for a different handle_packet callback is gone.
So we can kill the handle_packet callback and just call
usb_generic_handle_packet directly. The special hub handling in
usb_handle_packet() can go away for the same reason.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
This was done in a mostly automated fashion. I did it in three steps and then
rebased it into a single step which avoids repeatedly touching every file in
the tree.
The first step was a sed-based addition of the parent type to the subclass
registration functions.
The second step was another sed-based removal of subclass registration functions
while also adding virtual functions from the base class into a class_init
function as appropriate.
Finally, a python script was used to convert the DeviceInfo structures and
qdev_register_subclass functions to TypeInfo structures, class_init functions,
and type_register_static calls.
We are almost fully converted to QOM after this commit.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Type registeration is going to get turned into a QOM call so decouple the
legacy support.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Also handle {GET,SET}_INTERFACE in common code (usb-desc.c).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Zap data pointer from USBPacket, add a QEMUIOVector instead.
Add a bunch of helper functions to manage USBPacket data.
Switch over users to the new interface.
Note that USBPacket->len was used for two purposes: First to
pass in the buffer size and second to return the number of
transfered bytes or the status code on async transfers. There
is a new result variable for the latter. A new status code
was added to catch uninitialized result.
Nobody creates iovecs with more than one element (yet).
Some users are (temporarely) limited to iovecs with a single
element to keep the patch size as small as possible.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
This allows using the generic usb_generic_handle_packet function from
device code which does ASYNC control requests (such as the linux host
pass through code).
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Previously we relied on the .bNumInterfaces, but that won't always be
accurate after the introduction of grouped interfaces.
Signed-off-by: Brad Hards <bradh@frogmouth.net>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
This patch moves setting and clearing the remote_wakeup feature
bit (via USB_REQ_{SET,CLEAR}_FEATURE) to common code. Also
USB_REQ_GET_STATUS handling is moved to common code.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
This patch adds fields to the USBDevice struct for the current
speed (hard-wired to full speed for now) and current device
configuration. Also a init function is added which inializes
these fields. This allows USB_REQ_{GET,SET}_CONFIGURATION
handling to be moved to common code.
For most drivers the conversion is trivial ad they support a single
configuration only anyway. One exception is bluetooth where some
device-specific setup code runs after get/set configuration. The
other is usb-net which actually has two configurations so the
the code to check for the active configuration has been adapted.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
USB_REQ_SET_ADDRESS handling is identical in *all* emulated devices.
Move it to common code.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Switch the usb wavom driver over to the
new descriptor infrastructure.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Add qemu_activate_mouse_event_handler() calls to the usb wavom tablet so
it actually receives events. Also make sure we only remove the handler
if we registered it before.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Device names with whitespace require quoting in the shell and in the
monitor. Some of the offenders are also overly long. Some have a
more convenient alias, some don't.
The place for verbose device names is DeviceInfo member desc. The
name should be short & sweet.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Using the qdev name for the product description makes for inconvenient
qdev names.
Put the product description in new USBDeviceInfo member product_desc.
Make usb_qdev_init() use it. No user or guest visible change, since
the value is still the same.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
- for absolute mode, scale coordinates to the real device maximum values,
since some drivers (on Haiku and Linux at least) need them as such,
and the HID descriptor is boggus on some models anyway,
- keep the coordinates even when no button is pressed, on real tablet
the pen is sensed on the surface even without direct contact,
and drivers expect this,
- map left button to pressure according to what the Haiku driver wants,
- map the right button to the pen button,
- map the middle button to the eraser,
- use asynchronous reporting as the hid code does, stops the Haiku driver
(and probably others) from spending 50% cpu polling for changes.
Signed-off-by: François Revol <revol@free.fr>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Hook into DeviceInfo->exit().
handle_destroy() must not free the state struct, this is handled
by the new usb_qdev_exit() function now.
qdev_free(usb_device) works now.
Fix usb hub to qdev_free() all connected devices on unplug.
Unplugging a usb hub works now.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Move usb code from vl.c to usb-bus.c and make it use the new data
structures added by qdev conversion. qemu usb core should be able
to handle multiple USB busses just fine now (untested though).
Kill some usb_*_init() legacy functions, use usb_create_simple()
instead.
Kill some FIXMEs added by the first qdev/usb patch.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
* Add USBBus.
* Add USBDeviceInfo, move device callbacks here.
* Add usb-qdev helper functions.
* Switch drivers to qdev.
TODO:
* make the rest of qemu aware of usb busses and kill the FIXMEs
added by this patch.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6529 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3674 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3173 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2977 c046a42c-6fe2-441c-8c8c-71466251a162
|
