aboutsummaryrefslogtreecommitdiff
path: root/hw/usb-uhci.c
AgeCommit message (Collapse)Author
2010-04-25usb: remove dead assignments, spotted by clang analyzerBlue Swirl
Value stored is never read. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-04-04UHCI spurious interrut fixPaul Brook
Only raise an interrupt if the TD has actually completed. Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-02-10audio streaming from usb devicesDavid S. Ahern
I have streaming audio devices working within qemu-kvm. This is a port of the changes to qemu. Streaming audio generates a series of isochronous requests that are repetitive and time sensitive. The URBs need to be submitted in consecutive USB frames and responses need to be handled in a timely manner. Summary of the changes for isochronous requests: 1. The initial 'valid' value is increased to 32. It needs to be higher than its current value of 10 since the host adds a 10 frame delay to the scheduling of the first request; if valid is set to 10 the first isochronous request times out and qemu cancels it. 32 was chosen as a nice round number, and it is used in the path where a TD-async pairing already exists. 2. The token field in the TD is *not* unique for isochronous requests, so it is not a good choice for finding a matching async request. The buffer (where to write the guest data) is unique, so use that value instead. 3. TD's for isochronous request need to be completed in the async completion handler so that data is pushed to the guest as soon as it is available. The uhci code currently attempts to process complete isochronous TDs the next time the UHCI frame with the request is processed. The results in lost data since the async requests will have long since timed out based on the valid parameter. Increasing the valid value is not acceptable as it introduces a 1+ second delay in the data getting pushed to the guest. 4. The frame timer needs to be run on 1 msec intervals. Currently, the expire time for the processing the next frame is computed after the processing of each frame. This regularly causes the scheduling of frames to shift in time. When this happens the periodic scheduling of the requests is broken and the subsequent request is seen as a new request by the host resulting in a 10 msec delay (first isochronous request is scheduled for 10 frames from when the URB is submitted). [ For what's worth a small change is needed to the guest driver to have more outstanding URBs (at least 4 URBs with 5 packets per URB).] Signed-off-by: David Ahern <daahern@cisco.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-07Do not use dprintfmalc
dprintf is already claimed by POSIX[1], and on at least one system is implemented as a macro [1] http://www.opengroup.org/onlinepubs/9699919799/functions/dprintf.html Signed-off-by: malc <av1474@comtv.ru>
2009-12-23usb-uhci: symbolic names for pci registersMichael S. Tsirkin
No functional changes. I verified that the generated binary does not change. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Juan Quintela <quintela@redhat.com> Acked-by: Glauber Costa <glommer@gmail.com>
2009-12-12qdev: Replace device names containing whitespaceMarkus Armbruster
Device names with whitespace require quoting in the shell and in the monitor. Some of the offenders are also overly long. Some have a more convenient alias, some don't. The place for verbose device names is DeviceInfo member desc. The name should be short & sweet. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03savevm: Port to qdev.vmsd all devices that have qdevJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-01pci: pci.h cleanup: move out stuff not in pci.cMichael S. Tsirkin
pci.h declares some functions which aren't defined in pci.h. Clean up moving things to appropriate headers, and update all users. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2009-11-09pci: introduce pcibus_t to represent pci bus address/size instead of uint32_tIsaku Yamahata
This patch is preliminary for 64 bit BAR support. Introduce dedicated type, pcibus_t, to represent pci bus address/size instead of uint32_t. Later this type will be changed to uint64_t. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-09pci: s/PCI_ADDRESS_SPACE_/PCI_BASE_ADDRESS_SPACE_/ to match pci_regs.hIsaku Yamahata
make constants for pci base address match pci_regs.h by renaming PCI_ADDRESS_SPACE_xxx to PCI_BASE_ADDRESS_SPACE_xxx. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-07v3: don't call reset functions on cpu initializationGlauber Costa
There is absolutely no need to call reset functions when initializing devices. Since we are already registering them, calling qemu_system_reset() should suffice. Actually, it is what happens when we reboot the machine, and using the same process instead of a special case semantics will even allow us to find bugs easier. Furthermore, the fact that we initialize things like the cpu quite early, leads to the need to introduce synchronization stuff like qemu_system_cond. This patch removes it entirely. All we need to do is call qemu_system_reset() only when we're already sure the system is up and running I tested it with qemu (with and without io-thread) and qemu-kvm, and it seems to be doing okay - although qemu-kvm uses a slightly different patch. [ v2: user mode still needs cpu_reset, so put it in ifdef. ] [ v3: leave qemu_system_cond for now. ] Signed-off-by: Glauber Costa <glommer@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-10-27usb-uhci: port to vmstateJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-27usb-uhci: Add num_ports_vmstate to UHCIStateJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05switch usb bus to inplace allocation.Gerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-11Unexport ticks_per_sec variable. Create get_ticks_per_sec() functionJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-09qdev/usb: convert uhci.Gerd Hoffmann
Hookup pci device into qdev. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-09qdev/usb: make qemu aware of usb busses.Gerd Hoffmann
Move usb code from vl.c to usb-bus.c and make it use the new data structures added by qdev conversion. qemu usb core should be able to handle multiple USB busses just fine now (untested though). Kill some usb_*_init() legacy functions, use usb_create_simple() instead. Kill some FIXMEs added by the first qdev/usb patch. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-09qdev/usb: add usb bus support to qdev, convert drivers.Gerd Hoffmann
* Add USBBus. * Add USBDeviceInfo, move device callbacks here. * Add usb-qdev helper functions. * Switch drivers to qdev. TODO: * make the rest of qemu aware of usb busses and kill the FIXMEs added by this patch. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-20Fix most warnings (errors with -Werror) when debugging is enabledBlue Swirl
I used the following command to enable debugging: perl -p -i -e 's/^\/\/#define DEBUG/#define DEBUG/g' * */* */*/* Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-06-29Revert "Introduce reset notifier order"Jan Kiszka
This reverts commit 8217606e6edb49591b4a6fd5a0d1229cebe470a9 (and updates later added users of qemu_register_reset), we solved the problem it originally addressed less invasively. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-17Register usb-uhci reset function.Gleb Natapov
The device is not reset on system reset currently. Without this patch RHEL4.8 hangs after reboot if -usbdevice table is in use. Signed-off-by: Gleb Natapov <gleb@redhat.com>
2009-06-16Rename pci_register_io_region() to pci_register_bar()Avi Kivity
This function is used to manage a PCI BAR, so make the more generic pci_register_io_region() available to other uses. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-03use PCI_HEADER_TYPE.Isaku Yamahata
use symbolic value instead of 0x0e and related value. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
2009-02-05hw: remove error handling from qemu_malloc() callers (Avi Kivity)aliguori
Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6529 c046a42c-6fe2-441c-8c8c-71466251a162
2009-02-01Add and use #defines for PCI device classesblueswir1
This patch adds and uses #defines for PCI device classes and subclases, using a new pci_config_set_class() function, similar to the recently added pci_config_set_vendor_id() and pci_config_set_device_id(). Change since v1: fixed compilation of hw/sun4u.c Signed-off-by: Stuart Brady <stuart.brady@gmail.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6491 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-26Define PCI vendor and device IDs in pci.h (Stuart Brady)aliguori
This patch defines PCI vendor and device IDs in pci.h (matching those from Linux's pci_ids.h), and uses those definitions where appropriate. Change from v1: Introduces pci_config_set_vendor_id() / pci_config_set_device_id() accessors as suggested by Anthony Liguori. Signed-off-by: Stuart Brady <stuart.brady@gmail.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6442 c046a42c-6fe2-441c-8c8c-71466251a162
2008-09-11uhci: Change default transaction lifetime to 32 frames (Max Krasnyansky)aliguori
Transaction lifetime was originally set to 10 frames. That was an arbitrary number I picked without much thinking :). I'm changing that to 32 frames because things like interrupt transfers and such are scheduled at that rate. It seems like 1/32 is accepted as lowest supported rate. OHCI, for example, defines exactly 32 interrupt heads. While testing USB webcam under XP I noticed that interrupt transactions were being canceled and then resubmitted on a regular basis, which works but is a waste of CPU cycles. This change fixes that. All other devices I have are not affected. Signed-off-by: Max Krasnyansky <maxk@kernel.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5199 c046a42c-6fe2-441c-8c8c-71466251a162
2008-08-22uhci: improved TD matching, working ISOC transfersaurel32
While trying to make VX-3000 camera work on XP under KVM I realized that we do not necessarily have to find original TD address. All we care about is the token which identifies the transfer rather well (direction, endpoint, size, etc). This is especially important for the isochronous transfers because otherwise they are being canceled left and right and we do not make much progress. With this patch all devices that used bulk transfers that I've tried so far continue to work just as well. And now my USB web cammera (isoc transfers) is working well tool. It's not as smooth as native Windows but it's pretty darn smooth. The cool thing is that new USB code (both usb-uhci and usb-linux) is totaly generic and does not need any special logic for ISOC. Signed-off-by: Max Krasnyansky <maxk@kernel.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5072 c046a42c-6fe2-441c-8c8c-71466251a162
2008-08-22uhci: Fixed length handling for SETUP and OUT tokensaurel32
Fixes regression reported agains Linux 2.6.18. Looks like XP and newer Linux kernels are less sensitive to length returned for control transfers. Signed-off-by: Max Krasnyansky <maxk@kernel.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5070 c046a42c-6fe2-441c-8c8c-71466251a162
2008-08-21uhci: fixes for save/load-vm (Max Krasnyansky)aliguori
For some reason we were not registering save/load-vm handler for piix3 flavor of UHCI and hence save/load was broken. Async transactions need to be canceled when we save the VM because there is no way we can save/restore all that state. Since we do not mess the original TD/QH the driver will simply resubmit the transfers. Tested with Windows XP-SP2 running under QEMU/KQEMU. Signed-off-by: Max Krasnyansky <maxk@kernel.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5054 c046a42c-6fe2-441c-8c8c-71466251a162
2008-08-21uhci: rewrite UHCI emulator, fully async operation with multiple outstanding ↵aliguori
transactions (Max Krasnyansky) This is esentially a re-write of the QEMU UHCI layer. My initial goal was to support fully async operation with multiple outstanding async transactions. Along the way I realized that I can greatly simplify and cleanup the overall logic. There was a lot of duplicate and confusing code in the UHCI data structure parsing and other places. We were actually violating UHCI spec in handling async ISOC transaction (host controller is not supposed to write into the frame pointer). The reason I wanted to support fully async operation is because current synchronous version is unusable with most devices exported from host (via usb-linux.c). Transactions take a long time and the whole VM becomes slow as hell. Current async support is very rudimentory and for the most part non-functional. Single transaction at a time is simply not enough. I have a device for which XP driver submits both IN and OUT packets at the same time. IN packet always times out unless OUT packet makes it to the device. Hence we must be able to process both in order for that device to work. The new code is backwards compatible and was first tested agains original synchronous usb-linux.c and builtin usb devices like tablet which is also synchronous. Rewrite of the usb-linux.c is coming up next. Async support was tested against various XP versions (ie XP, SP2, SP3) and a bunch of different USB devices: serial port controllers, mice, keyboard, JTAG dongles (from Xilinx and Altera). ISOC support was only lighly tested and needs more work. It's not any worse than current code though. UHCI parser changes are probably somewhat hard to review without the understanding of the UHCI spec. The async design should be fairly easy to follow. Basically we have a list of async objects for each pending transfer. Async objects are tagged with the original TD (transfer descriptor) address and token. We now support unlimited number of outstanding isoc and one outstanding bulk/intr/ctrl transfer per QH (queue head). UHCI spec does not have a clear protocol for the cancelation of the trasfer requests. Driver can yank out TDs on any frame boundary. In oder to handle that I added somewhat fancy TD validation logic logic to avoid unnecessary cancelations. Signed-off-by: Max Krasnyansky <maxk@kernel.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5050 c046a42c-6fe2-441c-8c8c-71466251a162
2007-12-16Fix wrong signedness, by Andre Przywara.ths
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3815 c046a42c-6fe2-441c-8c8c-71466251a162
2007-11-17Break up vl.h.pbrook
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3674 c046a42c-6fe2-441c-8c8c-71466251a162
2007-11-11removed unused codebellard
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3609 c046a42c-6fe2-441c-8c8c-71466251a162
2007-10-04USB iso transfers support for the linux redirector and for UHCI, by Arnon ↵balrog
Gilboa. git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3328 c046a42c-6fe2-441c-8c8c-71466251a162
2007-09-17find -type f | xargs sed -i 's/[\t ]*$//g' # Yes, again. Note the star in ↵ths
the regex. git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3177 c046a42c-6fe2-441c-8c8c-71466251a162
2007-09-16find -type f | xargs sed -i 's/[\t ]$//g' # on most filesths
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3173 c046a42c-6fe2-441c-8c8c-71466251a162
2007-09-09Implement HID idle mode (avoids flooding guest with useless updates).pbrook
Fix UHCI NACK bug. git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3157 c046a42c-6fe2-441c-8c8c-71466251a162
2007-06-06Use the correct PCI IDs for Malta.ths
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2945 c046a42c-6fe2-441c-8c8c-71466251a162
2007-04-07Unify IRQ handling.pbrook
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2635 c046a42c-6fe2-441c-8c8c-71466251a162
2007-02-22Basic USB device resume (root hub only), by Lonnie Mendez.ths
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2449 c046a42c-6fe2-441c-8c8c-71466251a162
2007-01-17Fix USB buffer size, by Herbert Xu.ths
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2328 c046a42c-6fe2-441c-8c8c-71466251a162
2006-08-12SCSI and USB async IO support.pbrook
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2107 c046a42c-6fe2-441c-8c8c-71466251a162
2006-05-22Fix USB root hub hotplugging.pbrook
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@1931 c046a42c-6fe2-441c-8c8c-71466251a162
2006-05-21OHCI USB host emulation.pbrook
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@1928 c046a42c-6fe2-441c-8c8c-71466251a162
2006-05-13Rearrange PCI host emulation code.pbrook
Add ARM PCI emulation. git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@1916 c046a42c-6fe2-441c-8c8c-71466251a162
2006-04-25fix for HCHALTED status bitbellard
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@1852 c046a42c-6fe2-441c-8c8c-71466251a162
2006-04-24HCHALTED status bit handling (Lonnie Mendez)bellard
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@1850 c046a42c-6fe2-441c-8c8c-71466251a162
2006-03-11Add missing break statement.pbrook
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@1785 c046a42c-6fe2-441c-8c8c-71466251a162
2006-03-11Tweak UHCI device settings. Ignore host root hubs.pbrook
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@1779 c046a42c-6fe2-441c-8c8c-71466251a162
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-30 00:56:39 +0000