aboutsummaryrefslogtreecommitdiff
path: root/hw/usb-serial.c
AgeCommit message (Collapse)Author
2011-07-23Correct spelling of licensedMatthew Fernandez
Correct typos of "licenced" to "licensed". Reviewed-by: Stefan Weil <weil@mail.berlios.de> Reviewed-by: Andreas F=E4rber <andreas.faerber@web.de> Signed-off-by: Matthew Fernandez <matthew.fernandez@gmail.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-05-26usb: Pass the packet to the device's handle_control callbackHans de Goede
This allows using the generic usb_generic_handle_packet function from device code which does ASYNC control requests (such as the linux host pass through code). Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2011-05-26usb: update config descriptors to identify number of interfacesBrad Hards
Previously we relied on the .bNumInterfaces, but that won't always be accurate after the introduction of grouped interfaces. Signed-off-by: Brad Hards <bradh@frogmouth.net> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-01-11usb: move remote wakeup handling to common codeGerd Hoffmann
This patch moves setting and clearing the remote_wakeup feature bit (via USB_REQ_{SET,CLEAR}_FEATURE) to common code. Also USB_REQ_GET_STATUS handling is moved to common code. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-01-11usb: move USB_REQ_{GET,SET}_CONFIGURATION handling to common codeGerd Hoffmann
This patch adds fields to the USBDevice struct for the current speed (hard-wired to full speed for now) and current device configuration. Also a init function is added which inializes these fields. This allows USB_REQ_{GET,SET}_CONFIGURATION handling to be moved to common code. For most drivers the conversion is trivial ad they support a single configuration only anyway. One exception is bluetooth where some device-specific setup code runs after get/set configuration. The other is usb-net which actually has two configurations so the the code to check for the active configuration has been adapted. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-01-11usb: move USB_REQ_SET_ADDRESS handling to common codeGerd Hoffmann
USB_REQ_SET_ADDRESS handling is identical in *all* emulated devices. Move it to common code. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-01-11usb serial: use new descriptor infrastructure.Gerd Hoffmann
Switch the usb serial drivers (serial, braille) over to the new descriptor infrastructure. Note that this removes the freely configurable vendor and product id properties. I think the only reason this was configurable is that the only difference between the serial and the braille device is the vendor+product id. Of course the serial and braille devices keep their different IDs, but they can't be overritten from the command line any more. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2010-06-30usb-serial: Fail instead of crash when chardev is missingMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-25usb: remove dead assignments, spotted by clang analyzerBlue Swirl
Value stored is never read. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-16error: Replace qemu_error() by error_report()Markus Armbruster
error_report() terminates the message with a newline. Strip it it from its arguments. This fixes a few error messages lacking a newline: net_handle_fd_param()'s "No file descriptor named %s found", and tap_open()'s "vnet_hdr=1 requested, but no kernel support for IFF_VNET_HDR available" (all three versions). There's one place that passes arguments without newlines intentionally: load_vmstate(). Fix it up.
2010-03-16error: Move qemu_error & friends into their own headerMarkus Armbruster
2010-02-25Fix -usbdevice crashPaul Brook
If -usbdevice is used on a machine with no USB busses, usb_create will fail and return NULL. Patch below handles this failure gracefully rather than crashing when we try to init the device. Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-02-10segfault due to buffer overrun in usb-serialDavid S. Ahern
This fixes a segfault due to buffer overrun in the usb-serial device. The memcpy was incrementing the start location by recv_used yet, the computation of first_size (how much to write at the end of the buffer before wrapping to the front) was not accounting for it. This causes the next element after the receive buffer (recv_ptr) to get overwritten with random data. Signed-off-by: David Ahern <daahern@cisco.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-19Fix QEMU_WARN_UNUSED_RESULTKevin Wolf
Since commit 747bbdf7 QEMU_WARN_UNUSED_RESULT is never defined as it is conditional on a define from config-host.h which is included only later. Include that file earlier to get the warnings back. Reactivating it unfortunately leads to some warnings about unused qdev_init results. These calls are changed to qdev_init_nofail to avoid build failures. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-12qdev: Replace device names containing whitespaceMarkus Armbruster
Device names with whitespace require quoting in the shell and in the monitor. Some of the offenders are also overly long. Some have a more convenient alias, some don't. The place for verbose device names is DeviceInfo member desc. The name should be short & sweet. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-12qdev: Separate USB product description from qdev nameMarkus Armbruster
Using the qdev name for the product description makes for inconvenient qdev names. Put the product description in new USBDeviceInfo member product_desc. Make usb_qdev_init() use it. No user or guest visible change, since the value is still the same. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-30usb-serial and braille: use qdev for -usbdeviceGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-21char: rename CHR_EVENT_RESET to CHR_EVENT_OPENEDAmit Shah
The char event RESET is emitted when a char device is opened. Give it a better name. Patchworks-ID: 35287 Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05usb: hook unplug into qdev, cleanups + fixes.Gerd Hoffmann
Hook into DeviceInfo->exit(). handle_destroy() must not free the state struct, this is handled by the new usb_qdev_exit() function now. qdev_free(usb_device) works now. Fix usb hub to qdev_free() all connected devices on unplug. Unplugging a usb hub works now. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-09qdev/usb: add usb bus support to qdev, convert drivers.Gerd Hoffmann
* Add USBBus. * Add USBDeviceInfo, move device callbacks here. * Add usb-qdev helper functions. * Switch drivers to qdev. TODO: * make the rest of qemu aware of usb busses and kill the FIXMEs added by this patch. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-22usb-serial: implement break event.Jason Wessel
Implement the serial break via usb serial. The second data byte in ftdi status packet contains the break status. The values were already defined in usb-serial.c so it was a matter of making use of the event_trigger to form a urb to send over to the host controller with the serial break status set. This was tested against a linux development image which enables sysrq via a serial break on the ftdi usb console. Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2009-05-13Replace gcc variadic macro extension with C99 versionBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-02-05hw: remove error handling from qemu_malloc() callers (Avi Kivity)aliguori
Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6529 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-18add an init function parameter to qemu_chr_open()aurel32
And use it for the malta emulation. Fix segfault introduced in revision 6352. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6365 c046a42c-6fe2-441c-8c8c-71466251a162
2008-10-31Implement "info chardev" command. (Gerd Hoffmann)aliguori
This patch makes qemu keep track of the character devices in use and implements a "info chardev" monitor command to print a list. qemu_chr_open() sticks the devices into a linked list now. It got a new argument (label), so there is a name for each device. It also assigns a filename to each character device. By default it just copyes the filename passed in. Individual drivers can fill in something else though. qemu_chr_open_pty() sets the filename to name of the pseudo tty allocated. Output looks like this: (qemu) info chardev monitor: filename=unix:/tmp/run.sh-26827/monitor,server,nowait serial0: filename=unix:/tmp/run.sh-26827/console,server serial1: filename=pty:/dev/pts/5 parallel0: filename=vc:640x480 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5575 c046a42c-6fe2-441c-8c8c-71466251a162
2008-09-17[PATCH] usb-serial: Fix data corruption with usb serial emulationaurel32
* Remove the unused send_buf variable and its constant. * Fix a math error The variables recv_ptr and recv_used are not large enough to hold the constant 384, which causes data corruption when the pointer is reset with: s->recv_ptr = (s->recv_ptr + len) % RECV_BUF; Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Acked-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5242 c046a42c-6fe2-441c-8c8c-71466251a162
2008-08-17Fix some warnings that would be generated by gcc -Wmissing-prototypesblueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5022 c046a42c-6fe2-441c-8c8c-71466251a162
2008-08-13usb-serial: add support for modem linesaurel32
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4998 c046a42c-6fe2-441c-8c8c-71466251a162
2008-01-19Change the usb-serial product ID to a more widely recognised value (Samuel ↵balrog
Thibault). Implement chr_close callback for "stdio" so that it can be closed and reopened. Free chr devices after they're closed. git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3927 c046a42c-6fe2-441c-8c8c-71466251a162
2008-01-14USB-to-serial device (Samuel Thibault).balrog
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3914 c046a42c-6fe2-441c-8c8c-71466251a162
generated by cgit v1.2.3 (git 2.26.2) at 2024-11-30 03:36:20 +0000