aboutsummaryrefslogtreecommitdiff
path: root/hw/usb-ohci.c
AgeCommit message (Collapse)Author
2011-06-14usb: cancel async packets on unplugGerd Hoffmann
This patch adds USBBusOps struct with (for now) only a single callback which is called when a device is about to be destroyed. The USB Host adapters are implementing this callback and use it to cancel any async requests which might be in flight before the device actually goes away. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-05-26usb: add usb_handle_packetGerd Hoffmann
Add a usb_handle_packet function, put it into use everywhere. Right now it just calls dev->info->handle_packet(), that will change in future patches though. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-05-05Merge remote-tracking branch 'mst/for_anthony' into stagingAnthony Liguori
2011-05-05Merge remote branch 'origin/master' into pciMichael S. Tsirkin
Conflicts: exec.c
2011-05-04usb: move complete callback to port opsGerd Hoffmann
2011-05-04ohci: get ohci state via container_of()Gerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-04-12Replace cpu_physical_memory_rw were possibleStefan Weil
Using cpu_physical_memory_read, cpu_physical_memory_write and ldub_phys improves readability and allows removing some type casts. lduw_phys and ldl_phys were not used because both require aligned addresses. Therefore it is not possible to simply replace existing calls by one of these functions. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-04-07usb-ohci: convert to pci_register_bar_simple()Avi Kivity
Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-03-21change all other clock references to use nanosecond resolution accessorsPaolo Bonzini
This was done with: sed -i 's/qemu_get_clock\>/qemu_get_clock_ns/' \ $(git grep -l 'qemu_get_clock\>' ) sed -i 's/qemu_new_timer\>/qemu_new_timer_ns/' \ $(git grep -l 'qemu_new_timer\>' ) after checking that get_clock and new_timer never occur twice on the same line. There were no missed occurrences; however, even if there had been, they would have been caught by the compiler. There was exactly one false positive in qemu_run_timers: - current_time = qemu_get_clock (clock); + current_time = qemu_get_clock_ns (clock); which is of course not in this patch. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2011-01-12usb: zap pdev from usbportGerd Hoffmann
It isn't needed any more. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-01-11usb: keep track of physical port address.Gerd Hoffmann
Add a path string to USBPort. Add usb_port_location() function to set the physical location of the usb port. Update all drivers implementing usb ports to call it. Update the monitor commands to print it. Wind it up in qdev. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-01-11usb: add speed mask to portsGerd Hoffmann
Add a field to usb ports indicating the speed(s) they are able to handle. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-01-11usb: rework attach/detach workflowGerd Hoffmann
Add separate detach callback to USBPortOps, split uhci/ohci/musb/usbhub attach functions into two. Move common code to the usb_attach() function, only the hardware-specific bits remain in the attach/detach callbacks. Keep track of the port it is attached to for each usb device. [ v3: fix tyops in usb-musb.c ] Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-01-11usb: create USBPortOps, move attach there.Gerd Hoffmann
Create USBPortOps struct, move the attach function to that struct. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2010-12-11Record which USBDevice USBPort belongs too.Gleb Natapov
Ports on root hub will have NULL here. This is needed to reconstruct path from device to its root hub to build device path. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-11usb_ohci: Always use little endianAlexander Graf
This patch replaces explicit bswaps with endianness hints to the mmio layer. Because we don't depend on the target endianness anymore, we can also move the driver over to Makefile.objs. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-12-11Add endianness as io mem parameterAlexander Graf
As stated before, devices can be little, big or native endian. The target endianness is not of their concern, so we need to push things down a level. This patch adds a parameter to cpu_register_io_memory that allows a device to choose its endianness. For now, all devices simply choose native endian, because that's the same behavior as before. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-11-22pci: Replace unneeded type casts in calls of pci_register_barStefan Weil
There is no need for these type casts (as other existing code shows). So re-write the first argument without type cast (and remove a related TODO comment). Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-06-13OHCI address decoding fixPaul Brook
Ignore high address bits when PCI memory window is not mapped on a page boundary. Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-04-25usb: remove dead assignments, spotted by clang analyzerBlue Swirl
Value stored is never read. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-04-18Fix harmless if statements with empty body, spotted by clangBlue Swirl
These clang errors are harmless but worth fixing: CC ppc-softmmu/usb-ohci.o /src/qemu/hw/usb-ohci.c:1104:59: error: if statement has empty body [-Wempty-body] ohci->ctrl_head, ohci->ctrl_cur); /src/qemu/hw/usb-ohci.c:1371:57: error: if statement has empty body [-Wempty-body] DPRINTF("usb-ohci: port %d: SUSPEND\n", portnum); CC sparc64-softmmu/translate.o /src/qemu/target-sparc/translate.c:3173:37: error: if statement has empty body [-Wempty-body] ; // XXX Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-04-05OHCI qdev conversionPaul Brook
Convert remaining OHCI devices to QDEV interface. Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-04-04Revert "Compile usb-ohci only once"Paul Brook
This reverts commit f1698408f1dcb7548a21828a0b1e2b530fae3af3. PCI is always little-endian. Having a user-visible "be" property is just plain wrong.
2010-03-31usb: class specific interface requestsMax Reitz
Mass Storage Reset and Get Max LUN are class specific requests, but they were not marked as such in hw/usb-msd.c, moved therefore ClassInterfaceRequest and ClassInterfaceOutRequest from hw/usb-net.c to hw/usb.h. Furthermore there was a problem in hw/usb-ohci.c when using DEBUG concerning systems where size_t is a 32 bit integer (printf resulted in a segmentation fault). Signed-off-by: Max Reitz <max@tyndur.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-21Compile usb-ohci only onceBlue Swirl
Push TARGET_WORDS_BIGENDIAN dependency to board level. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-02-07Do not use dprintfmalc
dprintf is already claimed by POSIX[1], and on at least one system is implemented as a macro [1] http://www.opengroup.org/onlinepubs/9699919799/functions/dprintf.html Signed-off-by: malc <av1474@comtv.ru>
2009-12-23usb-ohci: symbolic names for pci registersMichael S. Tsirkin
No functional changes. I verified that the generated binary does not change. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Juan Quintela <quintela@redhat.com> Acked-by: Glauber Costa <glommer@gmail.com>
2009-12-12qdev: Replace device names containing whitespaceMarkus Armbruster
Device names with whitespace require quoting in the shell and in the monitor. Some of the offenders are also overly long. Some have a more convenient alias, some don't. The place for verbose device names is DeviceInfo member desc. The name should be short & sweet. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-01pci: pci.h cleanup: move out stuff not in pci.cMichael S. Tsirkin
pci.h declares some functions which aren't defined in pci.h. Clean up moving things to appropriate headers, and update all users. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2009-11-09pci: introduce pcibus_t to represent pci bus address/size instead of uint32_tIsaku Yamahata
This patch is preliminary for 64 bit BAR support. Introduce dedicated type, pcibus_t, to represent pci bus address/size instead of uint32_t. Later this type will be changed to uint64_t. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-09pci: s/PCI_ADDRESS_SPACE_/PCI_BASE_ADDRESS_SPACE_/ to match pci_regs.hIsaku Yamahata
make constants for pci base address match pci_regs.h by renaming PCI_ADDRESS_SPACE_xxx to PCI_BASE_ADDRESS_SPACE_xxx. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-07v3: don't call reset functions on cpu initializationGlauber Costa
There is absolutely no need to call reset functions when initializing devices. Since we are already registering them, calling qemu_system_reset() should suffice. Actually, it is what happens when we reboot the machine, and using the same process instead of a special case semantics will even allow us to find bugs easier. Furthermore, the fact that we initialize things like the cpu quite early, leads to the need to introduce synchronization stuff like qemu_system_cond. This patch removes it entirely. All we need to do is call qemu_system_reset() only when we're already sure the system is up and running I tested it with qemu (with and without io-thread) and qemu-kvm, and it seems to be doing okay - although qemu-kvm uses a slightly different patch. [ v2: user mode still needs cpu_reset, so put it in ifdef. ] [ v3: leave qemu_system_cond for now. ] Signed-off-by: Glauber Costa <glommer@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-10-05switch usb bus to inplace allocation.Gerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-01Revert "Get rid of _t suffix"Anthony Liguori
In the very least, a change like this requires discussion on the list. The naming convention is goofy and it causes a massive merge problem. Something like this _must_ be presented on the list first so people can provide input and cope with it. This reverts commit 99a0949b720a0936da2052cb9a46db04ffc6db29. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-01Get rid of _t suffixmalc
Some not so obvious bits, slirp and Xen were left alone for the time being. Signed-off-by: malc <av1474@comtv.ru>
2009-09-11Unexport ticks_per_sec variable. Create get_ticks_per_sec() functionJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-09qdev/usb: convert ohci.Gerd Hoffmann
Drop num_ports argument for usb_ohci_init_pci(), everybody calls it with num_ports == 3, so it is pointless. Convert ohci pci device into qdev. TODO: convert non-pci ohci adapters. You can add a OHCI USB Controller to your virtual pc now using '-device pci-ohci'. Specifying a id is a good idea, so you can attach usb devices to it, like this: -device pci-ohci,id=ohci -device usb-mouse,bus=ohci.0 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-09qdev/usb: make qemu aware of usb busses.Gerd Hoffmann
Move usb code from vl.c to usb-bus.c and make it use the new data structures added by qdev conversion. qemu usb core should be able to handle multiple USB busses just fine now (untested though). Kill some usb_*_init() legacy functions, use usb_create_simple() instead. Kill some FIXMEs added by the first qdev/usb patch. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-09qdev/usb: add usb bus support to qdev, convert drivers.Gerd Hoffmann
* Add USBBus. * Add USBDeviceInfo, move device callbacks here. * Add usb-qdev helper functions. * Switch drivers to qdev. TODO: * make the rest of qemu aware of usb busses and kill the FIXMEs added by this patch. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27usb-ohci: Change casts to DO_UPCAST() for OHCIPCIStateJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-25Make CPURead/WriteFunc structure 'const'Blue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-07-20Fix most warnings (errors with -Werror) when debugging is enabledBlue Swirl
I used the following command to enable debugging: perl -p -i -e 's/^\/\/#define DEBUG/#define DEBUG/g' * */* */*/* Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-07-16Update to a hopefully more future proof FSF addressBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-07-10usb-ohci: Fix endianness issueMichael Buesch
This fixes a possible endianness issue in the usb-ohci hw module. hcca.frame and ohci->frame_number are 16bit, so use cpu_to_le16(). Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29Revert "Introduce reset notifier order"Jan Kiszka
This reverts commit 8217606e6edb49591b4a6fd5a0d1229cebe470a9 (and updates later added users of qemu_register_reset), we solved the problem it originally addressed less invasively. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-16Rename pci_register_io_region() to pci_register_bar()Avi Kivity
This function is used to manage a PCI BAR, so make the more generic pci_register_io_region() available to other uses. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-16Remove io_index argument from cpu_register_io_memory()Avi Kivity
The parameter is always zero except when registering the three internal io regions (ROM, unassigned, notdirty). Remove the parameter to reduce the API's power, thus facilitating future change. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-22Introduce reset notifier orderJan Kiszka
Add the parameter 'order' to qemu_register_reset and sort callbacks on registration. On system reset, callbacks with lower order will be invoked before those with higher order. Update all existing users to the standard order 0. Note: At least for x86, the existing users seem to assume that handlers are called in their registration order. Therefore, the patch preserves this property. If someone feels bored, (s)he could try to identify this dependency and express it properly on callback registration. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-04-19Adds SM501 usb host emulation feature.aurel32
It makes usb keyboard available for sh4/r2d system emulation. The changes for "hw/usb-ohci.c" are as follows. - 'localmem_base' is introduced as OHCIState struct member. SM501 has a local memory, and it is used to pass and receive data with OHCI driver. OHCI driver accesses it with SH4 physical memory address, and SM501 accesses it with SM501 local address. 'localmem_base' holds where the SM501 local memory is mapped into SH4 physical address space. - Memory access functions modified to adjust address with 'localmem_base'. The functions are, ohci_read_*(), ohci_put_*(), and ohci_copy_*(). - ohci_read_hcca() and ohci_put_hcca() are introduced for more consistent implementation. For other source files, it does, - introduces usb_ohci_init_sm501(). - adds irq argument for SM501 initialization, to emulate USB interrupts. Signed-off-by: Shin-ichiro KAWASAKI <kawasaki@juno.dti.ne.jp> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7188 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-13Add and use remaining #defines for PCI device IDs (Stuart Brady)aliguori
This patch adds and uses #defines for the remaining hardcoded PCI device IDs. It also moves definitions taken from linux/pci_ids.h into a separate header (hw/pci_ids.h), removes the 'RTL' from PCI_DEVICE_ID_REALTEK_RTL8029, and renames PCI_DEVICE_ID_FSL_E500 to PCI_DEVICE_ID_MPC8533E to match Linux's definition. Changes in v2: * Don't use C99-style comments * Move definitions from linux/pci_ids.h into a separate header * Rename PCI_DEVICE_ID_FSL_E500 to PCI_DEVICE_ID_MPC8533E Signed-off-by: Stuart Brady <stuart.brady@gmail.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6841 c046a42c-6fe2-441c-8c8c-71466251a162
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-12 07:30:04 +0000