aboutsummaryrefslogtreecommitdiff
path: root/hw/usb-net.c
AgeCommit message (Collapse)Author
2010-11-16Out off array access in usb-netGleb Natapov
Properly check array bounds before accessing array element. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-08-22QemuOpts: make most qemu_*_opts staticGerd Hoffmann
Switch tree to lookup-by-name using qemu_find_opts(). Also hook up virtfs options so qemu_find_opts works for them too. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-04-25usb: remove dead assignments, spotted by clang analyzerBlue Swirl
Value stored is never read. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-31usb: class specific interface requestsMax Reitz
Mass Storage Reset and Get Max LUN are class specific requests, but they were not marked as such in hw/usb-msd.c, moved therefore ClassInterfaceRequest and ClassInterfaceOutRequest from hw/usb-net.c to hw/usb.h. Furthermore there was a problem in hw/usb-ohci.c when using DEBUG concerning systems where size_t is a 32 bit integer (printf resulted in a segmentation fault). Signed-off-by: Max Reitz <max@tyndur.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-16qemu-option: Move the implied first name into QemuOptsListMarkus Armbruster
We sometimes permit omitting the first option name, for example -device foo is short for -device driver=foo. The name to use ("driver" in the example) is passed as argument to qemu_opts_parse(). For each QemuOptsList, we use at most one such name. Move the name into QemuOptsList, and pass whether to permit the abbreviation. This ensures continued consistency, and simplifies the commit after next in this series.
2010-02-25Fix -usbdevice crashPaul Brook
If -usbdevice is used on a machine with no USB busses, usb_create will fail and return NULL. Patch below handles this failure gracefully rather than crashing when we try to init the device. Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-01-19Fix QEMU_WARN_UNUSED_RESULTKevin Wolf
Since commit 747bbdf7 QEMU_WARN_UNUSED_RESULT is never defined as it is conditional on a define from config-host.h which is included only later. Include that file earlier to get the warnings back. Reactivating it unfortunately leads to some warnings about unused qdev_init results. These calls are changed to qdev_init_nofail to avoid build failures. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-18usb-net: use qdev for -usbdeviceGerd Hoffmann
Rebased to master, adapted to device renaming by armbru, no other changes. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-12qdev: Replace device names containing whitespaceMarkus Armbruster
Device names with whitespace require quoting in the shell and in the monitor. Some of the offenders are also overly long. Some have a more convenient alias, some don't. The place for verbose device names is DeviceInfo member desc. The name should be short & sweet. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-12qdev: Separate USB product description from qdev nameMarkus Armbruster
Using the qdev name for the product description makes for inconvenient qdev names. Put the product description in new USBDeviceInfo member product_desc. Make usb_qdev_init() use it. No user or guest visible change, since the value is still the same. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03net: convert usb-net to NICStateMark McLoughlin
Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03net: remove NICInfo::vcMark McLoughlin
Since 1cc33683, this field is not set for most devices, so just remove it and its remaining few uses. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-27net: add receive_raw parameter to qemu_new_vlan_client()Mark McLoughlin
Trivial patch to allow supplying a receive_raw function. A future cleanup should combine this function pointer parameters into a table. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-27net: add a client type codeMark McLoughlin
This is so as to allow APIs which operate on specific client types without having to add a function table entry which is only implemented by a single client type. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-15net: allow NICs to be connected to netdevsMark McLoughlin
Introduce a 'peer' member to VLANClientState as an alternative to a vlan. The idea being that packets are transfered directly from peer clients rather than going through a vlan. Patchworks-ID: 35516 Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-12Fix sys-queue.h conflict for goodBlue Swirl
Problem: Our file sys-queue.h is a copy of the BSD file, but there are some additions and it's not entirely compatible. Because of that, there have been conflicts with system headers on BSD systems. Some hacks have been introduced in the commits 15cc9235840a22c289edbe064a9b3c19c5f49896, f40d753718c72693c5f520f0d9899f6e50395e94, 96555a96d724016e13190b28cffa3bc929ac60dc and 3990d09adf4463eca200ad964cc55643c33feb50 but the fixes were fragile. Solution: Avoid the conflict entirely by renaming the functions and the file. Revert the previous hacks. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-09qdev/usb: add usb bus support to qdev, convert drivers.Gerd Hoffmann
* Add USBBus. * Add USBDeviceInfo, move device callbacks here. * Add usb-qdev helper functions. * Switch drivers to qdev. TODO: * make the rest of qemu aware of usb busses and kill the FIXMEs added by this patch. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-09Don't leak VLANClientState on PCI hot removeMark McLoughlin
destroy_nic() requires that NICInfo::private by a PCIDevice pointer, but then goes on to require that the same pointer matches VLANClientState::opaque. That is no longer the case for virtio-net since qdev and wasn't previously the case for rtl8139, ne2k_pci or eepro100. Make the situation a lot more clear by maintaining a VLANClientState pointer in NICInfo. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-09net: add return value to packet receive handlerMark McLoughlin
This allows us to handle queue full conditions rather than dropping the packet on the floor. Signed-off-by: Mark McLoughlin <markmc@redhat.com>
2009-06-09net: pass VLANClientState* as first arg to receive handlersMark McLoughlin
Give static type checking a chance to catch errors. Signed-off-by: Mark McLoughlin <markmc@redhat.com>
2009-06-09net: re-name vc->fd_read() to vc->receive()Mark McLoughlin
VLANClientState's fd_read() handler doesn't read from file descriptors, it adds a buffer to the client's receive queue. Re-name the handlers to make things a little less confusing. Signed-off-by: Mark McLoughlin <markmc@redhat.com>
2009-06-09net: add fd_readv() handler to qemu_new_vlan_client() argsMark McLoughlin
This, apparently, is the style we prefer - all VLANClientState should be an argument to qemu_new_vlan_client(). Signed-off-by: Mark McLoughlin <markmc@redhat.com>
2009-04-17Introduce VLANClientState::cleanup() (Mark McLoughlin)aliguori
We're currently leaking memory and file descriptors on device hot-unplug. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7150 c046a42c-6fe2-441c-8c8c-71466251a162
2009-02-05hw: remove error handling from qemu_malloc() callers (Avi Kivity)aliguori
Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6529 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-07Add a -net name=foo parameter (Mark McLoughlin)aliguori
Allow the user to supply a vlan client name on the command line. This is probably only useful for management tools so that they can use their own names rather than parsing the output of 'info network'. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6220 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-07Add qemu_format_nic_info_str() (Mark McLoughlin)aliguori
Factor out a simple little function for formatting a NIC's info_str and make all NICs use it. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6218 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-07Add a model string to VLANClientState (Mark McLoughlin)aliguori
Don't lose track of what type/model a vlan client is so that we can e.g. assign a global per-model id to clients. The entire patch is basically a tedious excercise in making sure the type/model string gets propagated down to qemu_new_vlan_client(). Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6216 c046a42c-6fe2-441c-8c8c-71466251a162
2008-12-22Use the ARRAY_SIZE() macro where appropriate.malc
Change from v1: Avoid changing the existing coding style in certain files. Signed-off-by: Stuart Brady <stuart.brady@gmail.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6120 c046a42c-6fe2-441c-8c8c-71466251a162
2008-09-20Suppress gcc 4.x -Wpointer-sign (included in -Wall) warningsblueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5275 c046a42c-6fe2-441c-8c8c-71466251a162
2008-09-14Fix warnings that would be caused by gcc flag -Wwrite-stringsblueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5206 c046a42c-6fe2-441c-8c8c-71466251a162
2008-09-06Fix most warnings that would be caused by gcc flag -Wundefblueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5173 c046a42c-6fe2-441c-8c8c-71466251a162
2008-08-21Fix OpenBSD linker warningsblueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5044 c046a42c-6fe2-441c-8c8c-71466251a162
2008-07-29Move audio/sys-queue.h => sys-queue.haliguori
This makes it easier to reuse in other parts of QEMU. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4975 c046a42c-6fe2-441c-8c8c-71466251a162
2008-07-17Remove the NIC from vlan on usb destroy.balrog
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4885 c046a42c-6fe2-441c-8c8c-71466251a162
2008-07-17Add CDC-Ethernet usb NIC (original patch from Thomas Sailer).balrog
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4884 c046a42c-6fe2-441c-8c8c-71466251a162
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-25 21:00:18 +0000