aboutsummaryrefslogtreecommitdiff
path: root/hw/usb-hid.c
AgeCommit message (Collapse)Author
2010-03-19Rewrite mouse handlers to use QTAILQ and to have an activation functionAnthony Liguori
And convert usb-hid to use it (to avoid regression with bisection) Right now, when we do info mice and we've added a usb tablet, we don't see it until the guest starts using the tablet. We implement this behavior in order to provide a means to delay registration of a mouse handler since we treat the last registered handler as the current handler. This is a usability problem though as we would like to give the user feedback that they've either 1) not added an absolute device 2) there is an absolute device but the guest isn't using it 3) we have an absolute device and it's active. By using QTAILQ and having an explicit activation function that moves the handler to the front of the queue, we can implement the same semantics as before with respect to automatically switching to usb tablet while providing the user with a whole lot more information. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-03-09kbd leds: usb kbdGerd Hoffmann
Add led status notification support to the usb kbd driver. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-19USB HID does not support Set_IdleKevin O'Connor
I found that the QEMU USB keyboard support does not work properly with the Set_Idle command. Once a non-zero value is given to Set_Idle, then the keyboard reports an event on every poll - not based on the time issued in the Set_Idle command. I changed the code (see patch below) and it works for me. I'm not that familiar with the qemu internals, so I'm not sure if this is the best way to implement this feature. -Kevin Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-18Make USB hid devices self-poweredRiku Voipio
Simplifies power budget negotiation. Signed-off-by: Riku Voipio <riku.voipio@nokia.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-12qdev: Replace device names containing whitespaceMarkus Armbruster
Device names with whitespace require quoting in the shell and in the monitor. Some of the offenders are also overly long. Some have a more convenient alias, some don't. The place for verbose device names is DeviceInfo member desc. The name should be short & sweet. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-12qdev: Separate USB product description from qdev nameMarkus Armbruster
Using the qdev name for the product description makes for inconvenient qdev names. Put the product description in new USBDeviceInfo member product_desc. Make usb_qdev_init() use it. No user or guest visible change, since the value is still the same. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-12qdev: Rename USBDevice member devname to product_descMarkus Armbruster
It's not a device name, it's the USB product description string. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-30usb-hid: use qdev for -usbdeviceGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05usb: hook unplug into qdev, cleanups + fixes.Gerd Hoffmann
Hook into DeviceInfo->exit(). handle_destroy() must not free the state struct, this is handled by the new usb_qdev_exit() function now. qdev_free(usb_device) works now. Fix usb hub to qdev_free() all connected devices on unplug. Unplugging a usb hub works now. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-09qdev/usb: add some convinience aliases.Gerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-09qdev/usb: make qemu aware of usb busses.Gerd Hoffmann
Move usb code from vl.c to usb-bus.c and make it use the new data structures added by qdev conversion. qemu usb core should be able to handle multiple USB busses just fine now (untested though). Kill some usb_*_init() legacy functions, use usb_create_simple() instead. Kill some FIXMEs added by the first qdev/usb patch. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-09qdev/usb: add usb bus support to qdev, convert drivers.Gerd Hoffmann
* Add USBBus. * Add USBDeviceInfo, move device callbacks here. * Add usb-qdev helper functions. * Switch drivers to qdev. TODO: * make the rest of qemu aware of usb busses and kill the FIXMEs added by this patch. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-02-05hw: remove error handling from qemu_malloc() callers (Avi Kivity)aliguori
Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6529 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-07fix usb-hid SET_IDLE behaviour (Stefano Stabellini)aliguori
the usb-hid spec states that the SET_IDLE request has a 16bit value, where the upper byte specifies the idle rate (currently unimplemented, we handle only the 0 case, meaning infinite duration) and the lower byte specifies the report id (0 means all reports). In our code we do idle = value, while it should be idle = "upper byte", especially if the guest issues a GET_IDLE, we should return only the idle rate while we are returning only the report id. In practice it doesn't make much difference because I have only seen SET_VALUE with both bytes set to 0 so far, but still it is wrong. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6211 c046a42c-6fe2-441c-8c8c-71466251a162
2008-09-29Bluetooth HIDP emulation on top of usb-hid.c and L2CAP and SDP.balrog
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5347 c046a42c-6fe2-441c-8c8c-71466251a162
2008-09-15Fix range in the hid report descriptor for USB tablet.balrog
Should prevent the ugly wrapping due to a typo in an earlier commit. Fix by Gregor (gg@seh.de). git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5232 c046a42c-6fe2-441c-8c8c-71466251a162
2008-05-17Try to fix USB HID and make the HID reports readable.balrog
Decode HID report Items in the comments. Invert mouse wheel direction as per Alexander Graf's report and as we already do in the tablet. Clamp the Relative values to -127:127 as we claimed in the HID descriptors. git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4482 c046a42c-6fe2-441c-8c8c-71466251a162
2008-04-26Fix USB and HID report descriptors for mouse and tablet.balrog
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4253 c046a42c-6fe2-441c-8c8c-71466251a162
2008-01-14Add mouse wheel in the usb-mouse HID Report (by Daniel Godás).balrog
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3906 c046a42c-6fe2-441c-8c8c-71466251a162
2007-11-17Break up vl.h.pbrook
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3674 c046a42c-6fe2-441c-8c8c-71466251a162
2007-09-17Pass correct pointer to HID keyboard event handler, fixes regression from ↵balrog
IDLE mode introduction. git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3180 c046a42c-6fe2-441c-8c8c-71466251a162
2007-09-17find -type f | xargs sed -i 's/[\t ]*$//g' # Yes, again. Note the star in ↵ths
the regex. git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3177 c046a42c-6fe2-441c-8c8c-71466251a162
2007-09-16find -type f | xargs sed -i 's/[\t ]$//g' # on most filesths
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3173 c046a42c-6fe2-441c-8c8c-71466251a162
2007-09-09Implement HID idle mode (avoids flooding guest with useless updates).pbrook
Fix UHCI NACK bug. git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3157 c046a42c-6fe2-441c-8c8c-71466251a162
2007-06-22Add USB HID keyboard.balrog
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2996 c046a42c-6fe2-441c-8c8c-71466251a162
2007-03-31Fix usb hid and mass-storage protocol revision, by Juergen Keil.ths
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2558 c046a42c-6fe2-441c-8c8c-71466251a162
2007-02-11increase USB table poll intervalbellard
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2422 c046a42c-6fe2-441c-8c8c-71466251a162
2007-01-05Dynamic handling of guest mice, by Lonnie Mendez.ths
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2290 c046a42c-6fe2-441c-8c8c-71466251a162
2006-08-12SCSI and USB async IO support.pbrook
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2107 c046a42c-6fe2-441c-8c8c-71466251a162
2006-07-19usb destroy API change (Lonnie Mendez)bellard
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2066 c046a42c-6fe2-441c-8c8c-71466251a162
2006-06-26display device identifier string for user with info usb (Lonnie Mendez)bellard
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2029 c046a42c-6fe2-441c-8c8c-71466251a162
2006-05-25Rearrange SCSI disk emulation code.pbrook
Add USB mass storage device emulation. git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@1940 c046a42c-6fe2-441c-8c8c-71466251a162
2006-04-12USB tablet support (Brad Campbell, Anthony Liguori)bellard
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@1810 c046a42c-6fe2-441c-8c8c-71466251a162
2005-11-05added virtual USB mouse supportbellard
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@1599 c046a42c-6fe2-441c-8c8c-71466251a162
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-22 08:23:30 +0000