Age | Commit message (Collapse) | Author |
|
The TPM Physical Presence Interface is not target specific.
Build this file once for all targets.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221209170042.71169-4-philmd@linaro.org>
[thuth: Drop the CONFIG_SOFTMMU statements, they are not needed here]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230112134928.1026006-4-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
|
|
When running under Xen and the guest reboots, it boots into a new domain
with a new QEMU process (and a new swtpm process if using the emulator
backend). The existing reset function is triggered just before the old
QEMU process exists which causes QEMU to startup the TPM backend and
then immediately shut it down. This is probably harmless but when using
the emulated backend, it wastes CPU and IO time reloading state, etc.
Fix this by calling the reset function directly from realize() when
running under Xen. During a reboot, this will be called by the QEMU
process for the new domain.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-id: 20220826143841.1515326-1-ross.lagerwall@citrix.com
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
|
|
.. and clean up not longer needed conditionals in DSTD build code
tpm-tis AML will be fetched and included when ISA bridge will
build its own AML code (including attached devices).
Expected AML change:
the device under separate _SB.PCI0.ISA scope is moved directly
under Device(ISA) node.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20220608135340.3304695-34-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
At the moment, there doesn't seems to be any way to know that QEMU
made modification to the command buffer. This is potentially an issue
on Xen while migrating a guest, as modification to the buffer after
the migration as started could be ignored and not transfered to the
destination.
Mark the memory region of the command buffer as dirty once a request
is completed.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Message-id: 20220411144749.47185-1-anthony.perard@citrix.com
|
|
In tpm_tis_mmio_read(), tpm_tis_mmio_write() and
tpm_tis_dump_state(), we calculate a locality index with
tpm_tis_locality_from_addr() and then use it as an index into the
s->loc[] array. In all these cases, the array index can't overflow
because the MemoryRegion is sized to be TPM_TIS_NUM_LOCALITIES <<
TPM_TIS_LOCALITY_SHIFT bytes. However, Coverity can't see that, and
it complains (CID 1487138, 1487180, 1487188, 1487198, 1487240).
Add an assertion to tpm_tis_locality_from_addr() that the calculated
locality index is valid, which will help Coverity and also catch any
potential future bug where the MemoryRegion isn't sized exactly.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20220525125904.483075-1-stefanb@linux.ibm.com
|
|
Replace the global variables with inlined helper functions. getpagesize() is very
likely annotated with a "const" function attribute (at least with glibc), and thus
optimization should apply even better.
This avoids the need for a constructor initialization too.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220323155743.1585078-12-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
MIPS patches queue
- Fix CP0 cycle counter timing
- Fix VMState of gt64120 IRQs
- Long due PIIX4 QOM cleanups
- ISA IRQ QOM'ification / cleanups
# gpg: Signature made Tue 08 Mar 2022 18:39:42 GMT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* remotes/philmd/tags/mips-20220308:
tests/avocado/linux_ssh_mips_malta.py: add missing accel (tcg) tag
hw/isa: Inline and remove one-line isa_init_irq()
hw/isa: Drop unused attributes from ISADevice
hw/isa/isa-bus: Remove isabus_dev_print()
hw/input/pckbd: QOM'ify IRQ numbers
hw/rtc/m48t59-isa: QOM'ify IRQ number
hw/rtc/mc146818rtc: QOM'ify IRQ number
hw/mips/gt64xxx_pci: Resolve gt64120_register()
hw/isa/piix4: Replace some magic IRQ constants
hw/isa/piix4: Resolve global instance variable
hw/isa/piix4: Pass PIIX4State as opaque parameter for piix4_set_irq()
hw/isa/piix4: Resolve redundant i8259[] attribute
malta: Move PCI interrupt handling from gt64xxx_pci to piix4
hw/mips/gt64xxx_pci: Fix PCI IRQ levels to be preserved during migration
target/mips: Remove duplicated MIPSCPU::cp0_count_rate
target/mips: Fix cycle counter timing calculations
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
isa_init_irq() has become a trivial one-line wrapper for isa_get_irq().
It can therefore be removed.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> (tpm_tis_isa)
Acked-by: Corey Minyard <cminyard@mvista.com> (isa_ipmi_bt, isa_ipmi_kcs)
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20220301220037.76555-8-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220307134353.1950-14-philippe.mathieu.daude@gmail.com>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
|
|
Move the various memalign-related functions out of osdep.h and into
their own header, which we include only where they are used.
While we're doing this, add some brief documentation comments.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220226180723.1706285-10-peter.maydell@linaro.org
|
|
"tpm_ppi.h" only requires to include "exec/memory.h" to get
the MemoryRegion declaration.
tpm_ppi.c requires "hw/qdev-core.h" to use the DEVICE() macro,
tpm_crb.c is the only source file requiring "exec/address-spaces.h".
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220207082756.82600-2-f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
We might not start at the beginning of the memory region. Let's
calculate the offset into the memory region via the difference in the
host addresses.
Acked-by: Stefan Berger <stefanb@linux.ibm.com>
Fixes: ffab1be70692 ("tpm: clear RAM when "memory overwrite" requested")
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Claudio Fontana <cfontana@suse.de>
Cc: Thomas Huth <thuth@redhat.com>
Cc: "Alex Bennée" <alex.bennee@linaro.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Laurent Vivier <lvivier@redhat.com>
Cc: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20210727082545.17934-2-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Commit 6e8a3ff6ed ("docs/specs/tpm: reST-ify TPM documentation")
converted docs/specs/tpm.txt to docs/specs/tpm.rst.
We still have several references to the old file, so let's fix them
with the following command:
sed -i s/tpm.txt/tpm.rst/ $(git grep -l docs/specs/tpm.txt)
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210517151702.109066-5-sgarzare@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
Commit e50caf4a5c ("tracing: convert documentation to rST")
converted docs/devel/tracing.txt to docs/devel/tracing.rst.
We still have several references to the old file, so let's fix them
with the following command:
sed -i s/tracing.txt/tracing.rst/ $(git grep -l docs/devel/tracing.txt)
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210517151702.109066-2-sgarzare@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
Stop including exec/address-spaces.h in files that don't need it.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210416171314.2074665-5-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
|
|
Some tpm devices have no category, put them into the correct category.
Signed-off-by: Gan Qixin <ganqixin@huawei.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-Id: <20201130083630.2520597-8-ganqixin@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
|
|
Linking of qemu-system-ppc64 fails on macOS with dtrace enabled:
error: probe tpm_spapr_show_buffer doesn't exist
error: Could not register probes
ld: error creating dtrace DOF section for architecture x86_64
The failure is explained in 8c8ed03850208e4 ("net/colo: Match is-enabled
probe to tracepoint"). In short, is-enabled probe can't be used without
a matching trace probe. And for this particular case
tpm_util_show_buffer probe should be enabled to print TPM buffer.
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
|
|
Move the variable declaration close to the macro that uses it.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20201211220529.2290218-29-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
There is no "version 2" of the "Lesser" General Public License.
It is either "GPL version 2.0" or "Lesser GPL version 2.1".
This patch replaces all occurrences of "Lesser GPL version 2" with
"Lesser GPL version 2.1" in comment section.
Signed-off-by: Chetan Pant <chetan4windows@gmail.com>
Message-Id: <20201023123516.19843-1-chetan4windows@gmail.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
This converts existing DECLARE_INSTANCE_CHECKER usage to
OBJECT_DECLARE_SIMPLE_TYPE when possible.
$ ./scripts/codeconverter/converter.py -i \
--pattern=AddObjectDeclareSimpleType $(git grep -l '' -- '*.[ch]')
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Paul Durrant <paul@xen.org>
Message-Id: <20200916182519.415636-6-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
'remotes/ehabkost/tags/machine-next-pull-request' into staging
QOM boilerplate cleanup
Documentation build fix:
* memory: Remove kernel-doc comment marker (Eduardo Habkost)
QOM cleanups:
* Rename QOM macros for consistency between
TYPE_* and type checking constants (Eduardo Habkost)
QOM new macros:
* OBJECT_DECLARE_* and OBJECT_DEFINE_* macros (Daniel P. Berrangé)
* DECLARE_*_CHECKER macros (Eduardo Habkost)
Automated QOM boilerplate changes:
* Automated changes to use DECLARE_*_CHECKER (Eduardo Habkost
* Automated changes to use OBJECT_DECLARE* (Eduardo Habkost)
# gpg: Signature made Thu 10 Sep 2020 19:17:49 BST
# gpg: using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6
# gpg: issuer "ehabkost@redhat.com"
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full]
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/machine-next-pull-request: (33 commits)
virtio-vga: Use typedef name for instance_size
vhost-user-vga: Use typedef name for instance_size
xilinx_axienet: Use typedef name for instance_size
lpc_ich9: Use typedef name for instance_size
omap_intc: Use typedef name for instance_size
xilinx_axidma: Use typedef name for instance_size
tusb6010: Rename TUSB to TUSB6010
pc87312: Rename TYPE_PC87312_SUPERIO to TYPE_PC87312
vfio: Rename PCI_VFIO to VFIO_PCI
usb: Rename USB_SERIAL_DEV to USB_SERIAL
sabre: Rename SABRE_DEVICE to SABRE
rs6000_mc: Rename RS6000MC_DEVICE to RS6000MC
filter-rewriter: Rename FILTER_COLO_REWRITER to FILTER_REWRITER
esp: Rename ESP_STATE to ESP
ahci: Rename ICH_AHCI to ICH9_AHCI
vmgenid: Rename VMGENID_DEVICE to TYPE_VMGENID
vfio: Rename VFIO_AP_DEVICE_TYPE to TYPE_VFIO_AP_DEVICE
dev-smartcard-reader: Rename CCID_DEV_NAME to TYPE_USB_CCID_DEV
ap-device: Rename AP_DEVICE_TYPE to TYPE_AP_DEVICE
gpex: Fix type checking function name
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Some trace points are attributed to the wrong source file. Happens
when we neglect to update trace-events for code motion, or add events
in the wrong place, or misspell the file name.
Clean up with help of scripts/cleanup-trace-events.pl. Funnies
requiring manual post-processing:
* accel/tcg/cputlb.c trace points are in trace-events.
* block.c and blockdev.c trace points are in block/trace-events.
* hw/block/nvme.c uses the preprocessor to hide its trace point use
from cleanup-trace-events.pl.
* hw/tpm/tpm_spapr.c uses pseudo trace point tpm_spapr_show_buffer to
guard debug code.
* include/hw/xen/xen_common.h trace points are in hw/xen/trace-events.
* linux-user/trace-events abbreviates a tedious list of filenames to
*/signal.c.
* net/colo-compare and net/filter-rewriter.c use pseudo trace points
colo_compare_miscompare and colo_filter_rewriter_debug to guard
debug code.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200806141334.3646302-5-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Generated using:
$ ./scripts/codeconverter/converter.py -i \
--pattern=TypeCheckMacro $(git grep -l '' -- '*.[ch]')
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-12-ehabkost@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-13-ehabkost@redhat.com>
Message-Id: <20200831210740.126168-14-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
Some typedefs and macros are defined after the type check macros.
This makes it difficult to automatically replace their
definitions with OBJECT_DECLARE_TYPE.
Patch generated using:
$ ./scripts/codeconverter/converter.py -i \
--pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]')
which will split "typdef struct { ... } TypedefName"
declarations.
Followed by:
$ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \
$(git grep -l '' -- '*.[ch]')
which will:
- move the typedefs and #defines above the type check macros
- add missing #include "qom/object.h" lines if necessary
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-9-ehabkost@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-10-ehabkost@redhat.com>
Message-Id: <20200831210740.126168-11-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Meson doesn't enjoy the same flexibility we have with Make in choosing
the include path. In particular the tracing headers are using
$(build_root)/$(<D).
In order to keep the include directives unchanged,
the simplest solution is to generate headers with patterns like
"trace/trace-audio.h" and place forwarding headers in the source tree
such that for example "audio/trace.h" includes "trace/trace-audio.h".
This patch is too ugly to be applied to the Makefiles now. It's only
a way to separate the changes to the tracing header files from the
Meson rewrite of the tracing logic.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Exit on TPM backend failures in the same way as the TPM CRB and TIS device
models do. With this change we now get an error report when the backend
did not start up properly:
error: internal error: qemu unexpectedly closed the monitor:
2020-07-07T12:49:28.333928Z qemu-system-ppc64: tpm-emulator: \
TPM result for CMD_INIT: 0x101 operation failed
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20200707201625.4177419-2-stefanb@linux.vnet.ibm.com
|
|
TPM subsytem is split into backends (see commit f4ede81eed2)
and frontends (see i.e. 3676bc69b35). Keep the emulated
hardware 'frontends' under hw/tpm/, but move the backends
in the backends/tpm/ directory.
Suggested-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200612085444.8362-13-philmd@redhat.com
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
|
|
We are going to split the TPM backends from the TPM emulated
hardware in the next commit. Make the TPM util helpers accessible
by moving local "tpm_util.h" to global "sysemu/tpm_util.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-id: 20200612085444.8362-12-philmd@redhat.com
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
|
|
We are going to make "tpm_util.h" publicly accessible by
moving it to the include/ directory in the next commit.
The DEFINE_PROP_TPMBE() macro is only meaningful for the
TPM hardware files (in hw/tpm/), so keep this macro in a
local header.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-id: 20200612085444.8362-11-philmd@redhat.com
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
|
|
We are going to make "tpm_util.h" publicly accessible by
moving it to the include/ directory in a pair of commits.
Keep declarations internals to hw/tpm/ in "tpm_int.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-id: 20200612085444.8362-10-philmd@redhat.com
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
|
|
The trace_event_get_state_backends() call is useful to avoid
making extensive calls (usually preparing arguments passed to
the tracing framework. In this case, the extensive work is
done in tpm_util_show_buffer(), and the arguments used to
call it don't involve extra processing. Simplify by moving
the TRACE_TPM_UTIL_SHOW_BUFFER check to tpm_util_show_buffer.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-id: 20200612085444.8362-9-philmd@redhat.com
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
|
|
Remove unnecessary 'tpm_int.h' header inclusion.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-id: 20200612085444.8362-8-philmd@redhat.com
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
|
|
Nothing in "tpm_ppi.h" require declarations from "hw/acpi/tpm.h".
Reduce dependencies and include it only in the files requiring it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-id: 20200612085444.8362-7-philmd@redhat.com
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
|
|
Files using the TPM_STANDARD_CMDLINE_OPTS macro declared in
"tpm_int.h" will use QEMU_OPT_STRING definition declared in
"qemu/option.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-id: 20200612085444.8362-6-philmd@redhat.com
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
|
|
From CODING_STYLE.rst:
Do not include "qemu/osdep.h" from header files since the .c
file will have already included it.
Remove "qemu/osdep.h" from "tpm_tis.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-id: 20200612085444.8362-5-philmd@redhat.com
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
|
|
The TPMDEV describe TPM backends. Use the TPM_BACKEND config
name which is self-explicit.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Message-id: 20200612085444.8362-4-philmd@redhat.com
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
|
|
Clean up wrong usage of FALSE and TRUE in places that use "bool" from stdbool.h.
FALSE and TRUE (with capital letters) are the constants defined by glib for
being used with the "gboolean" type of glib. But some parts of the code also use
TRUE and FALSE for variables that are declared as "bool" (the type from <stdbool.h>).
Signed-off-by: Jafar Abdi <cafer.abdi@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
|
|
The tpm-tis-device device does not support PPI. Let's
change the default value for the corresponding property
instead of tricking this latter in the mach-virt machine.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Message-id: 20200427143145.16251-2-eric.auger@redhat.com
|
|
Introduce the tpm-tis-device which is a sysbus device
and is bound to be used on ARM.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Message-id: 20200305165149.618-6-eric.auger@redhat.com
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
|
|
Let's separate the compilation of tpm_tis_common.c from
the compilation of tpm_tis_isa.c
The common part will be also compiled along with the
tpm_tis_sysbus device.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Message-id: 20200305165149.618-5-eric.auger@redhat.com
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
|
|
Move the device agnostic code into tpm_tis_common.c and
put the ISA device specific code into tpm_tis_isa.c
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Message-id: 20200305165149.618-4-eric.auger@redhat.com
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
|
|
As we plan to introduce a SysBus TPM TIS device, let's
make the TPMState a common struct usable by both the
ISADevice and the SysBusDevice. TPMStateISA embeds the
struct and inherits from the ISADevice.
The prototype of functions bound to be used by both
the ISA and SysBus devices is changed to take TPMState
handle.
A bunch of structs also are renamed to be specialized
for the ISA device. Besides those transformations, no
functional change is expected.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Message-id: 20200305165149.618-3-eric.auger@redhat.com
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
|
|
As we plan to introduce a sysbus TPM_TIS, let's rename
TPM_TIS into TPM_TIS_ISA.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Message-id: 20200305165149.618-2-eric.auger@redhat.com
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
|
|
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20200121152935.649898-6-stefanb@linux.ibm.com>
[dwg: Use default in Kconfig rather than select to avoid breaking
Windows host build]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
Extend the tpm_spapr frontend with VM suspend and resume support.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Message-Id: <20200121152935.649898-5-stefanb@linux.ibm.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
Implement support for TPM on ppc64 by implementing the vTPM CRQ interface
as a frontend. It can use the tpm_emulator driver backend with the external
swtpm.
The Linux vTPM driver for ppc64 works with this emulation.
This TPM emulator also handles the TPM 2 case.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20200121152935.649898-4-stefanb@linux.ibm.com>
[dwg: Use device_class_set_props(), tweak Kconfig]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20200121152935.649898-2-stefanb@linux.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
post-copy migration fails on destination with error such as:
2019-12-26T10:22:44.714644Z qemu-kvm: ram_block_discard_range:
Unaligned start address: 0x559d2afae9a0
Use qemu_memalign() to constrain the PPI RAM memory alignment.
Cc: qemu-stable@nongnu.org
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Message-id: 20200103074000.1006389-3-marcandre.lureau@redhat.com
|
|
The following patch will need to handle properties registration during
class_init time. Let's use a device_class_set_props() setter.
spatch --macro-file scripts/cocci-macro-file.h --sp-file
./scripts/coccinelle/qdev-set-props.cocci --keep-comments --in-place
--dir .
@@
typedef DeviceClass;
DeviceClass *d;
expression val;
@@
- d->props = val
+ device_class_set_props(d, val)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200110153039.1379601-20-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Define the new macro VMSTATE_INSTANCE_ID_ANY for callers who wants to
auto-generate the vmstate instance ID. Previously it was hard coded
as -1 instead of this macro. It helps to change this default value in
the follow up patches. No functional change.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|