aboutsummaryrefslogtreecommitdiff
path: root/hw/tpm
AgeCommit message (Collapse)Author
2019-07-25tpm_emulator: Translate TPM error codes to stringsStefan Berger
Implement a function to translate TPM error codes to strings so that at least the most common error codes can be translated to human readable strings. Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2019-07-25tpm: Exit in reset when backend indicates failureStefan Berger
Exit() in the frontend reset function when the backend indicates intialization failure. Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2019-07-08hw/tpm: Only build tpm_ppi.o if any of TPM_TIS/TPM_CRB is builtPhilippe Mathieu-Daudé
The TPM Physical Presence Interface routines are only used by the CRB/TIS interfaces. Do not compile this file if any of them is built. Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
2019-06-12Include qemu-common.h exactly where neededMarkus Armbruster
No header includes qemu-common.h after this commit, as prescribed by qemu-common.h's file comment. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-5-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and net/tap-bsd.c fixed up]
2019-06-12Include qemu/module.h where needed, drop it from qemu-common.hMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-4-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for hw/usb/dev-hub.c hw/misc/exynos4210_rng.c hw/misc/bcm2835_rng.c hw/misc/aspeed_scu.c hw/display/virtio-vga.c hw/arm/stm32f205_soc.c; ui/cocoa.m fixed up]
2019-05-13Clean up ill-advised or unusual header guardsMarkus Armbruster
Leading underscores are ill-advised because such identifiers are reserved. Trailing underscores are merely ugly. Strip both. Our header guards commonly end in _H. Normalize the exceptions. Done with scripts/clean-header-guards.pl. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190315145123.28030-7-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> [Changes to slirp/ dropped, as we're about to spin it off]
2019-03-22trace-events: Shorten file names in commentsMarkus Armbruster
We spell out sub/dir/ in sub/dir/trace-events' comments pointing to source files. That's because when trace-events got split up, the comments were moved verbatim. Delete the sub/dir/ part from these comments. Gets rid of several misspellings. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190314180929.27722-3-armbru@redhat.com Message-Id: <20190314180929.27722-3-armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-03-07tpm: express dependencies with KconfigPaolo Bonzini
This automatically removes the TPM backends from the binary altogether if no front-ends are selected. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07i386: express dependencies with KconfigPaolo Bonzini
This way, the default-configs file only need to specify the boards and any optional devices. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-37-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07isa: express dependencies with kconfigPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-36-yang.zhong@intel.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07build: switch to KconfigPaolo Bonzini
The make_device_config.sh script is replaced by minikconf, which is modified to support the same command line as its predecessor. The roots of the parsing are default-configs/*.mak, Kconfig.host and hw/Kconfig. One difference with make_device_config.sh is that all symbols have to be defined in a Kconfig file, including those coming from the configure script. This is the reason for the Kconfig.host file introduced in the previous patch. Whenever a file in default-configs/*.mak used $(...) to refer to a config-host.mak symbol, this is replaced by a Kconfig dependency; this part must be done already in this patch for bisectability. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Acked-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190123065618.3520-28-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-07kconfig: introduce kconfig filesPaolo Bonzini
The Kconfig files were generated mostly with this script: for i in `grep -ho CONFIG_[A-Z0-9_]* default-configs/* | sort -u`; do set fnord `git grep -lw $i -- 'hw/*/Makefile.objs' ` shift if test $# = 1; then cat >> $(dirname $1)/Kconfig << EOF config ${i#CONFIG_} bool EOF git add $(dirname $1)/Kconfig else echo $i $* fi done sed -i '$d' hw/*/Kconfig for i in hw/*; do if test -d $i && ! test -f $i/Kconfig; then touch $i/Kconfig git add $i/Kconfig fi done Whenever a symbol is referenced from multiple subdirectories, the script prints the list of directories that reference the symbol. These symbols have to be added manually to the Kconfig files. Kconfig.host and hw/Kconfig were created manually. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Yang Zhong <yang.zhong@intel.com> Message-Id: <20190123065618.3520-27-yang.zhong@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-02-24tpm_tis: convert tpm_tis_show_buffer() to use trace eventLiam Merwick
cppcheck reports: [hw/tpm/tpm_tis.c:113]: (warning) %d in format string (no. 2) requires 'int' but the argument type is 'unsigned int' Rather than just converting the format specifier to use '%u", the tpm_tis_show_buffer() function is converted to use trace points and the two debug callers use the trace event infrastructure so that it's available in production cases also and not just when DEBUG_TIS is enabled. Signed-off-by: Liam Merwick <liam.merwick@oracle.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
2019-02-24tpm_tis: fix loop that cancels any seizure by a lower localityLiam Merwick
In tpm_tis_mmio_write() if the requesting locality is seizing access, any seizure by a lower locality is cancelled. However the loop doing the seizure had an off-by-one error and the locality immediately preceding the requesting locality was not being cleared. This is fixed by adjusting the test in the for loop to check the localities up to the requesting locality. Signed-off-by: Liam Merwick <Liam.Merwick@oracle.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
2019-01-17tpm: clear RAM when "memory overwrite" requestedMarc-André Lureau
Note: the "Platform Reset Attack Mitigation" specification isn't explicit about NVDIMM, since they could have different usages. It uses the term "system memory" generally (and also "volatile memory RAM" in its introduction). For initial support, I propose to consider non-volatile memory as not being subject to the memory clear. There is an on-going discussion in the TCG "pcclientwg" working group for future revisions. CPU cache clearing is done unconditionally in edk2 since commit d20ae95a13e851 (edk2-stable201811). Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-01-17tpm: allocate/map buffer for TPM Physical Presence interfaceStefan Berger
Implement a virtual memory device for the TPM Physical Presence interface. The memory is located at 0xFED45000 and used by ACPI to send messages to the firmware (BIOS) and by the firmware to provide parameters for each one of the supported codes. This interface should be used by all TPM devices on x86 and can be added by calling tpm_ppi_init_io(). Note: bios_linker cannot be used to allocate the PPI memory region, since the reserved memory should stay stable across reboots, and might be needed before the ACPI tables are installed. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-01-17tpm: add a "ppi" boolean propertyMarc-André Lureau
The following patches implement the TPM Physical Presence Interface, make use of a new memory region and a fw_cfg entry. Enable PPI by default with >=4.0 machine type, to avoid migration issues. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-12-04tpm: Make sure the locality received from backend is validStefan Berger
Make sure that the locality passed from the backend to tpm_tis_request_completed() is valid. Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2018-12-04tpm: Make sure new locality passed to tpm_tis_prep_abort() is validStefan Berger
Make sure that the new locality passed to tpm_tis_prep_abort() is valid. Add a comment to aborting_locty that it may be any locality, including TPM_TIS_NO_LOCALITY. Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2018-12-03tpm: Remove unused locty parameter from tpm_tis_abort()Stefan Berger
Remove the unused locty parameter from tpm_tis_abort() function. Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2018-11-14tpm: use loop iterator to set sts data fieldPrasad J Pandit
When TIS request is done, set 'sts' data field across all localities. Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
2018-10-30tpm: Zero-init structure to avoid uninitialized variables in valgrind logStefan Berger
Zero-init the ptm_loc structure so that we don't have fields that are not initialised. Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2018-05-24tpm: extend TPM TIS with state migration supportStefan Berger
Extend the TPM TIS interface with state migration support. We need to synchronize with the backend thread to make sure that a command being processed by the external TPM emulator has completed and its response been received. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2018-05-24tpm: extend TPM emulator with state migration supportStefan Berger
Extend the TPM emulator backend device with state migration support. The external TPM emulator 'swtpm' provides a protocol over its control channel to retrieve its state blobs. We implement functions for getting and setting the different state blobs. In case the setting of the state blobs fails, we return a negative errno code to fail the start of the VM. Since we have an external TPM emulator, we need to make sure that we do not migrate the state for as long as it is busy processing a request. We need to wait for notification that the request has completed processing. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2018-03-29tpm: CRB: Enforce locality is requested before processing bufferStefan Berger
Section 5.5.3.2.2 of the CRB specs states that use of the TPM through the localty control method must first be requested, otherwise the command will be dropped. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2018-03-29tpm: CRB: Reset Granted flag when relinquishing localityStefan Berger
Reset the Granted flag when relinquishing a locality. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2018-03-29tpm: CRB: set the Idle flag by defaultStefan Berger
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2018-03-21tpm: CRB: query backend for TPM established flagStefan Berger
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2018-03-21tpm: CRB: reset locAssigned upon relinquishing localityStefan Berger
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2018-03-21tpm: CRB: set registers to 0 by defaultStefan Berger
Initialize all registers of the CRB device to 0. This clears a few flags upon a reset. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2018-03-21tpm: CRB: Set tpmRegValidSts flag to '1' in device resetStefan Berger
Fix the initialization of the tpmRegValidSts flag and set it to '1' during device reset without expecting a write to another register. This seems to also be the default behavior of real hardware. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2018-03-08Merge remote-tracking branch ↵Peter Maydell
'remotes/stefanberger/tags/pull-tpm-2018-03-07-1' into staging Merge tpm 2018/03/07 # gpg: Signature made Wed 07 Mar 2018 12:42:13 GMT # gpg: using RSA key 75AD65802A0B4211 # gpg: Good signature from "Stefan Berger <stefanb@linux.vnet.ibm.com>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: B818 B9CA DF90 89C2 D5CE C66B 75AD 6580 2A0B 4211 * remotes/stefanberger/tags/pull-tpm-2018-03-07-1: tpm: convert tpm_tis.c to use trace-events tpm: convert tpm_emulator.c to use trace-events tpm: convert tpm_util.c to use trace-events tpm: convert tpm_passthrough.c to use trace-events tpm: convert tpm_crb.c to use trace-events Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-06tpm: convert tpm_tis.c to use trace-eventsStefan Berger
Leave the DEBUG_TIS for more debugging and convert to use if (DEBUG_TIS) rather than #if DEBUG_TIS where it is being used. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2018-03-06tpm: convert tpm_emulator.c to use trace-eventsStefan Berger
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2018-03-06tpm: convert tpm_util.c to use trace-eventsStefan Berger
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2018-03-06tpm: convert tpm_passthrough.c to use trace-eventsStefan Berger
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2018-03-06tpm: convert tpm_crb.c to use trace-eventsStefan Berger
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2018-03-02Include less of the generated modular QAPI headersMarkus Armbruster
In my "build everything" tree, a change to the types in qapi-schema.json triggers a recompile of about 4800 out of 5100 objects. The previous commit split up qmp-commands.h, qmp-event.h, qmp-visit.h, qapi-types.h. Each of these headers still includes all its shards. Reduce compile time by including just the shards we actually need. To illustrate the benefits: adding a type to qapi/migration.json now recompiles some 2300 instead of 4800 objects. The next commit will improve it further. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180211093607.27351-24-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> [eblake: rebase to master] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-02-21tests: add test for TPM TIS deviceStefan Berger
Move the TPM TIS related register and flag #defines into include/hw/acpi/tpm.h for access by the test case. Write a test case that covers the TIS functionality. Add the tests cases to the MAINTAINERS file. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2018-02-09Clean up includesMarkus Armbruster
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes, with the change to target/s390x/gen-features.c manually reverted, and blank lines around deletions collapsed. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-3-armbru@redhat.com>
2018-02-03tpm: tis: move one-line function into callerStefan Berger
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2018-02-03tpm: wrap stX_be_p in tpm_cmd_set_XYZ functionsStefan Berger
Wrap the calls to stl_be_p and stw_be_p in tpm_cmd_set_XYZ functions that are similar to existing getters. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2018-02-03tpm: Split off tpm_crb_reset functionStefan Berger
Split off the tpm_crb_reset function part from tpm_crb_realize that we need to run every time the machine resets. Also register our reset function with the system since TYPE_DEVICE seems to not get a reset otherwise. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2018-01-29tpm: add CRB deviceMarc-André Lureau
tpm_crb is a device for TPM 2.0 Command Response Buffer (CRB) Interface as defined in TCG PC Client Platform TPM Profile (PTP) Specification Family “2.0” Level 00 Revision 01.03 v22. The PTP allows device implementation to switch between TIS and CRB model at run time, but given that CRB is a simpler device to implement, I chose to implement it as a different device. The device doesn't implement other locality than 0 for now (my laptop TPM doesn't either, so I assume this isn't so bad) Tested with some success with Linux upstream and Windows 10, seabios & modified ovmf. The device is recognized and correctly transmit command/response with passthrough & emu. However, we are missing PPI ACPI part atm. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
2018-01-29tpm: report backend request errorMarc-André Lureau
Use an Error** for request to let the caller handle error reporting. This will also allow to inform the frontend of a backend error. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
2018-01-29tpm: lookup cancel path under tpm device classMarc-André Lureau
Since Linux commit 313d21eeab9282e, tpm devices have their own device class "tpm" and the cancel path must be looked up under /sys/class/tpm/ instead of /sys/class/misc/. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
2018-01-29tpm: fix alignment issuesMarc-André Lureau
The new tpm-crb-test fails on sparc host: TEST: tests/tpm-crb-test... (pid=230409) /i386/tpm-crb/test: Broken pipe FAIL GTester: last random seed: R02S29cea50247fe1efa59ee885a26d51a85 (pid=230423) FAIL: tests/tpm-crb-test and generates a new clang sanitizer runtime warning: /home/petmay01/linaro/qemu-for-merges/hw/tpm/tpm_util.h:36:24: runtime error: load of misaligned address 0x7fdc24c00002 for type 'const uint32_t' (aka 'const unsigned int'), which requires 4 byte alignment 0x7fdc24c00002: note: pointer points here <memory cannot be printed> The sparc architecture does not allow misaligned loads and will segfault if you try them. For example, this function: static inline uint32_t tpm_cmd_get_size(const void *b) { return be32_to_cpu(*(const uint32_t *)(b + 2)); } Should read, return ldl_be_p(b + 2); As a general rule you can't take an arbitrary pointer into a byte buffer and try to interpret it as a structure or a pointer to a larger-than-bytesize-data simply by casting the pointer. Use this clean up as an opportunity to remove unnecessary temporary buffers and casts. Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
2018-01-29tpm: Set the flags of the CMD_INIT command to 0Stefan Berger
The flags of the CMD_INIT control channel command were not initialized properly. Fix this and set to 0. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2018-01-16maint: Fix macros with broken 'do/while(0); ' usageEric Blake
The point of writing a macro embedded in a 'do { ... } while (0)' loop (particularly if the macro has multiple statements or would otherwise end with an 'if' statement) is so that the macro can be used as a drop-in statement with the caller supplying the trailing ';'. Although our coding style frowns on brace-less 'if': if (cond) statement; else something else; that is the classic case where failure to use do/while(0) wrapping would cause the 'else' to pair with any embedded 'if' in the macro rather than the intended outer 'if'. But conversely, if the macro includes an embedded ';', then the same brace-less coding style would now have two statements, making the 'else' a syntax error rather than pairing with the outer 'if'. Thus, even though our coding style with required braces is not impacted, ending a macro with ';' makes our code harder to port to projects that use brace-less styles. The change should have no semantic impact. I was not able to fully compile-test all of the changes (as some of them are examples of the ugly bit-rotting debug print statements that are completely elided by default, and I didn't want to recompile with the necessary -D witnesses - cleaning those up is left as a bite-sized task for another day); I did, however, audit that for all files touched, all callers of the changed macros DID supply a trailing ';' at the callsite, and did not appear to be used as part of a brace-less conditional. Found mechanically via: $ git grep -B1 'while (0);' | grep -A1 \\\\ Signed-off-by: Eric Blake <eblake@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20171201232433.25193-7-eblake@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-12-22tpm: Implement tpm_sized_buffer_resetStefan Berger
Move the definition of TPMSizedBuffer out of tpm_tis.c into tpm_util.h and implement tpm_sized_buffer_reset() for the following patches to use. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-23 21:36:11 +0000