aboutsummaryrefslogtreecommitdiff
path: root/hw/tpm
AgeCommit message (Collapse)Author
2017-12-22tpm: Implement tpm_sized_buffer_resetStefan Berger
Move the definition of TPMSizedBuffer out of tpm_tis.c into tpm_util.h and implement tpm_sized_buffer_reset() for the following patches to use. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2017-12-22tpm_tis: merge r/w_offset into rw_offsetStefan Berger
We can now merge the r_offset and w_offset into a single rw_offset. This is possible since when the offset is used for writing in RECEPTION state then reads are ignore. Conversely, when the offset is used for reading when in COMPLETION state, then writes are ignored. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2017-12-22tpm_tis: move r/w_offsets to TPMStateStefan Berger
Now that we have a single buffer, we also only need a single set of read/write offsets into that buffer. This works since only one locality can be active. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2017-12-22tpm_tis: merge read and write buffer into single bufferStefan Berger
Since we can only be in read or write mode, we can merge the buffers into a single buffer. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2017-12-22tpm_tis: move buffers from localities into common locationStefan Berger
One read buffer and one write buffer is sufficient for all localities. The localities cannot all be active at the same time, and only the active locality can use the r/w buffers. Inactive localities will require the COMMAND_READY flag to be set on the STS register to move to the READY state, which then enables access to using the buffer for writing of a command, while all other localities are inactive. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2017-12-22tpm_tis: remove TPMSizeBuffer usageStefan Berger
Remove usage of TPMSizeBuffer. The size of the buffers is limited now by s->be_buffer_size, which is the size of the buffer the TIS has negotiated with the backend. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2017-12-22tpm_tis: limit size of buffer from backendStefan Berger
This is a preparatory patch for the subsequent ones where we get rid of the flexibility of supporting any kind of buffer size that the backend may support. We keep the size at 4096, which is also the size the external emulator supports. So, limit the size of the buffer we can support and pass it back to the backend. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2017-12-22tpm_tis: convert uint32_t to size_tStefan Berger
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2017-12-22tpm_emulator: Add a caching layer for the TPM Established flagStefan Berger
Add a caching layer for the TPM established flag so that we don't need to go to the emulator every time the flag is read by accessing the REG_ACCESS register. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2017-12-19tpm: move qdev_prop_tpm to hw/tpm/Cornelia Huck
Building with --disable-tpm yields ../hw/core/qdev-properties-system.o: In function `set_tpm': /home/cohuck/git/qemu/hw/core/qdev-properties-system.c:274: undefined reference to `qemu_find_tpm_be' /home/cohuck/git/qemu/hw/core/qdev-properties-system.c:278: undefined reference to `tpm_backend_init' ../hw/core/qdev-properties-system.o: In function `release_tpm': /home/cohuck/git/qemu/hw/core/qdev-properties-system.c:291: undefined reference to `tpm_backend_reset' Move the implementation of DEFINE_PROP_TPMBE to hw/tpm/ so that it is only built when tpm is actually configured, and build tpm_util in every case. Fixes: 493b78303532 ("qdev: add DEFINE_PROP_TPMBE") Reported-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Laurent Vivier <lvivier@redhat.com> Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
2017-12-18hw/tpm: remove old i386 dependencyPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@gmail.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-12-14tpm: tpm_passthrough: Fail startup if FE buffer size < BE buffer sizeStefan Berger
If the requested buffer size of the frontend is smaller than the fixed buffer size of the host's TPM, fail the startup_tpm() interface function, which will make the device unusable. We fail it because the backend TPM could produce larger packets than what the frontend could pass to the OS. The current combination of TIS frontend and either passthrough or emulator backend will not lead to this case since the TIS can support any size of buffer. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2017-12-14tpm: tpm_emulator: get and set buffer size of deviceStefan Berger
Convert the tpm_emulator backend to get the current buffer size of the external device and set it to the buffer size that the frontend (TIS) requests. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2017-12-14tpm: tpm_passthrough: Read the buffer size from the host deviceStefan Berger
Rather than hard coding the buffer size in the tpm_passthrough backend read the TPM I/O buffer size from the host device. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2017-12-14tpm: pull tpm_util_request() out of tpm_util_test()Stefan Berger
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2017-12-14tpm: Move getting TPM buffer size to backendsStefan Berger
Rather than setting the size of the TPM buffer in the front-end, query the backend for the size of the buffer. In this patch we just move the hard-coded buffer size of 4096 to the backends. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2017-12-14tpm: remove tpm_register_model()Marc-André Lureau
Query object classes that implements TPMIf instead. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
2017-12-14tpm-tis: use DEFINE_PROP_TPMBEMarc-André Lureau
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
2017-12-14tpm-tis: check that at most one TPM device existsMarc-André Lureau
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
2017-12-14tpm-tis: remove redundant 'tpm_tis:' in error messagesMarc-André Lureau
The reported error message is already prefixed with the -device name & arguments. Before: qemu-system-x86_64: -device tpm-tis,id=foo,tpmdev=foo,irq=21: tpm_tis: IRQ 21 is outside valid range of 0 to 15 After: qemu-system-x86_64: -device tpm-tis,id=foo,tpmdev=foo,irq=21: IRQ 21 is outside valid range of 0 to 15 Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
2017-12-14tpm-emulator: add a FIXME comment about blocking cancelMarc-André Lureau
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
2017-12-14tpm: add tpm_cmd_get_size() to tpm_utilMarc-André Lureau
The function is generally useful and used in the following patches. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
2017-12-14tpm: add TPM interface to lookup TPM versionMarc-André Lureau
Do not hardcode TPM device model to lookup version, use an interface instead. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
2017-12-14tpm: rename qemu_find_tpm() -> qemu_find_tpm_be()Marc-André Lureau
find_tpm() will be introduced to lookup the TPM device. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
2017-12-14tpm-tis: simplify header inclusionMarc-André Lureau
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
2017-12-14tpm-passthrough: workaround a possible raceMarc-André Lureau
The TPM backend processing thread has common shared variable race issues. (they should not be so easy to reach since guest interaction with the device is slow compared to host emulation) An obvious one is setting op_cancelled from device thread after calling write(cancel_fd). The backend thread may return before the device thread has set the variable. Instead set it before cancellation. Even if the write() failed, the end result is command get possibly cancelled (even if cancellation came from external sources it doesn't matter much). It's worth to consider removing the backend processing thread for now. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
2017-12-14tpm-passthrough: simplify create()Marc-André Lureau
Use a similar code as tpm_emulator_create(), call handle_opts() and handle failure cleanup with object_unref() in create(). Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
2017-12-14tpm-passthrough: make it safer to destroy after creationMarc-André Lureau
Check fds values before closing, to avoid close(-1). Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
2017-12-14tpm-backend: move set 'id' to common codeMarc-André Lureau
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
2017-12-14tpm-passthrough: pass TPMPassthruState to handle_device_optsMarc-André Lureau
It doesn't need TPMBackend. Also reorder arguments for consistency. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
2017-12-14tpm-passthrough: don't save guessed cancel_path in optionsMarc-André Lureau
The value is later unneeded, and may leak if the free visitor doesn't consider it since has_cancel_path is false. And for consistency with "path" it shouldn't be returned in get_tpm_options(). Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
2017-12-14tpm-be: ask model to the TPM interfaceMarc-André Lureau
No need to store the mode in the backend, or to let the frontend set it itself. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
2017-12-14tpm-be: report error instead of front-endMarc-André Lureau
Backend can give more accurate error description, and lift out the job from the frontend. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
2017-12-14tpm-be: call request_completed() out of threadMarc-André Lureau
Lift from the backend implementation the responsability to call the request_completed() callback outside of thread context. This also simplify frontend/interface work, as they no longer need to care whether the callback is called from a different thread. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
2017-12-14tpm-tis: no longer expose TPMStateMarc-André Lureau
Now that there is an interface instead. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
2017-12-14tpm-backend: store TPMIf interface, improve backend_init()Marc-André Lureau
Store the TPM interface, the actual object may be different from TPMState. Keep a reference on the interface, and check the backend wasn't already initialized. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
2017-12-14tpm: move TpmIf in include/sysemu/tpm.hMarc-André Lureau
This is a better location than hw/tpm, since we are going to use the interface from outside hw/tpm. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
2017-12-14tpm-tis: remove unused locty_numberMarc-André Lureau
This field slipped in commit 5086bf9784. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
2017-11-15tpm_tis: Return 0 for every register in case of failure modeStefan Berger
Rather than returning ~0, return 0 for every register in case of failure mode. The '0' is better to indicate that there's no device there. It avoids SeaBIOS detecting a device and getting stuck on it trying to read and write its registers. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2017-11-15tpm_tis: Return TPM_VERSION_UNSPEC in case of BE failureStefan Berger
In case the backend has a failure, such as the tpm_emulator's CMD_INIT failing, the TIS goes into failure mode and does not respond to reads or writes to MMIO registers. In this case we need to prevent the ACPI table from being added and the straight-forward way is to indicate that there's no known TPM version being used. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2017-11-15tpm-emulator: protect concurrent ctrl_chr accessMarc-André Lureau
The control chardev is being used from the data thread to set the locality of the next request. Altough the chr has a write mutex, we may potentially read the reply from another thread request. Add a mutex to protect from concurrent control commands. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
2017-10-25tpm: print buffers received from TPM when debuggingStefan Berger
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2017-10-19tpm: move recv_data_callback to TPM interfaceMarc-André Lureau
Simplify the TPM backend setup, move callback to TPM interface. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
2017-10-19tpm: add a QOM TPM interfaceMarc-André Lureau
This will simplify backend / interface objects relationship, so the frontend interface will simply have to implement the TPM QOM interface. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
2017-10-19tpm-tis: fold TPMTISEmuState in TPMStateMarc-André Lureau
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
2017-10-19tpm-tis: remove tpm_tis.h headerMarc-André Lureau
The definitions are now private to TIS implementation. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
2017-10-19tpm-tis: move TPMState to TIS headerMarc-André Lureau
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
2017-10-19tpm: remove locty_data from TPMStateMarc-André Lureau
Keep it internal to tpm-tis instead. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
2017-10-19tpm-emulator: fix error handlingMarc-André Lureau
The previous patch cleaned up a bit error handling, and exposed an existing bug: error_report_err() could be called with a NULL error. Instead, make tpm_emulator_set_locality() set the error. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
2017-10-19tpm: add TPMBackendCmd to hold the request stateMarc-André Lureau
This simplifies a bit locality handling, and argument passing, and could pave the way to queuing requests (if that makes sense). Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-02-23 06:03:43 +0000