aboutsummaryrefslogtreecommitdiff
path: root/hw/timer/aspeed_timer.c
AgeCommit message (Collapse)Author
2019-07-01aspeed/timer: Ensure positive muldiv deltaChristian Svensson
If the host decrements the counter register that results in a negative delta. This is then passed to muldiv64 which only handles unsigned numbers resulting in bogus results. This fix ensures the delta being operated on is positive. Test case: kexec a kernel using aspeed_timer and it will freeze on the second bootup when the kernel initializes the timer. With this patch that no longer happens and the timer appears to run OK. Signed-off-by: Christian Svensson <bluecmd@google.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 20190618165311.27066-12-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-01aspeed/timer: Fix match calculationsAndrew Jeffery
If the match value exceeds reload then we don't want to include it in calculations for the next event. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20190618165311.27066-10-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-01aspeed/timer: Status register contains reload for stopped timerAndrew Jeffery
From the datasheet: This register stores the current status of counter #N. When timer enable bit TMC30[N * b] is disabled, the reload register will be loaded into this counter. When timer bit TMC30[N * b] is set, the counter will start to decrement. CPU can update this register value when enable bit is set. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20190618165311.27066-9-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-01aspeed/timer: Fix behaviour running LinuxJoel Stanley
The Linux kernel driver was updated in commit 4451d3f59f2a ("clocksource/drivers/fttmr010: Fix set_next_event handler) to fix an issue observed on hardware: > RELOAD register is loaded into COUNT register when the aspeed timer > is enabled, which means the next event may be delayed because timer > interrupt won't be generated until <0xFFFFFFFF - current_count + > cycles>. When running under Qemu, the system appeared "laggy". The guest is now scheduling timer events too regularly, starving the host of CPU time. This patch modifies the timer model to attempt to schedule the timer expiry as the guest requests, but if we have missed the deadline we re interrupt and try again, which allows the guest to catch up. Provides expected behaviour with old and new guest code. Fixes: c04bd47db6b9 ("hw/timer: Add ASPEED timer device model") Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20190618165311.27066-8-clg@kaod.org [clg: - merged a fix from Andrew Jeffery <andrew@aj.id.au> "Fire interrupt on failure to meet deadline" https://lists.ozlabs.org/pipermail/openbmc/2019-January/014641.html - adapted commit log - checkpatch fixes ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-06-12Include qemu/module.h where needed, drop it from qemu-common.hMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-4-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for hw/usb/dev-hub.c hw/misc/exynos4210_rng.c hw/misc/bcm2835_rng.c hw/misc/aspeed_scu.c hw/display/virtio-vga.c hw/arm/stm32f205_soc.c; ui/cocoa.m fixed up]
2018-10-19error: Fix use of error_prepend() with &error_fatal, &error_abortMarkus Armbruster
From include/qapi/error.h: * Pass an existing error to the caller with the message modified: * error_propagate(errp, err); * error_prepend(errp, "Could not frobnicate '%s': ", name); Fei Li pointed out that doing error_propagate() first doesn't work well when @errp is &error_fatal or &error_abort: the error_prepend() is never reached. Since I doubt fixing the documentation will stop people from getting it wrong, introduce error_propagate_prepend(), in the hope that it lures people away from using its constituents in the wrong order. Update the instructions in error.h accordingly. Convert existing error_prepend() next to error_propagate to error_propagate_prepend(). If any of these get reached with &error_fatal or &error_abort, the error messages improve. I didn't check whether that's the case anywhere. Cc: Fei Li <fli@suse.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20181017082702.5581-2-armbru@redhat.com>
2018-09-25aspeed/timer: fix compile breakage with clang 3.4.2Cédric Le Goater
In file included from /home/thuth/devel/qemu/hw/timer/aspeed_timer.c:16: /home/thuth/devel/qemu/include/hw/misc/aspeed_scu.h:37:3: error: redefinition of typedef 'AspeedSCUState' is a C11 feature [-Werror,-Wtypedef-redefinition] } AspeedSCUState; ^ /home/thuth/devel/qemu/include/hw/timer/aspeed_timer.h:27:31: note: previous definition is here typedef struct AspeedSCUState AspeedSCUState; Reported-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180921161939.822-2-clg@kaod.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-26aspeed/timer: use the APB frequency from the SCUCédric Le Goater
The timer controller can be driven by either an external 1MHz clock or by the APB clock. Today, the model makes the assumption that the APB frequency is always set to 24MHz but this is incorrect. The AST2400 SoC on the palmetto machines uses a 48MHz input clock source and the APB can be set to 48MHz. The consequence is a general system slowdown. The QEMU machines using the AST2500 SoC do not seem impacted today because the APB frequency is still set to 24MHz. We fix the timer frequency for all SoCs by linking the Timer model to the SCU model. The APB frequency driving the timers is now the one configured for the SoC. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 20180622075700.5923-4-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-04-26timer/aspeed: fix vmstate version idCédric Le Goater
commit 1d3e65aa7ac5 ("hw/timer: Add value matching support to aspeed_timer") increased the vmstate version of aspeed.timer because the state had changed, but it also bumped the version of the VMSTATE_STRUCT_ARRAY under the aspeed.timerctrl which did not need to. Change back this version to fix migration. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20180423101433.17759-1-clg@kaod.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-06-13timer/aspeed: fix timer enablement when a reload is not setCédric Le Goater
When a timer is enabled before a reload value is set, the controller waits for a reload value to be set before starting decrementing. This fix tries to cover that case by changing the timer expiry only when a reload value is valid. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1496739312-32304-1-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-17hw/timer: Add value matching support to aspeed_timerAndrew Jeffery
Value matching allows Linux to boot with CONFIG_NO_HZ_IDLE=y on the palmetto-bmc machine. Two match registers are provided for each timer. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1465974248-20434-1-git-send-email-andrew@aj.id.au Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-05-20aspeed: include qemu/log.hPaolo Bonzini
This is not visible with the default "log" trace backend. With other backends however trace.h does not include qemu/log.h, resulting in build failures. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1463745452-25831-2-git-send-email-pbonzini@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-05-18Fix some typos found by codespellStefan Weil
Signed-off-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-03-16hw/timer: Add ASPEED timer device modelAndrew Jeffery
Implement basic ASPEED timer functionality for the AST2400 SoC[1]: Up to 8 timers can independently be configured, enabled, reset and disabled. Some hardware features are not implemented, namely clock value matching and pulse generation, but the implementation is enough to boot the Linux kernel configured with aspeed_defconfig. [1] http://www.aspeedtech.com/products.php?fPath=20&rId=376 Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1458096317-25223-2-git-send-email-andrew@aj.id.au Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-16 23:02:49 +0000