aboutsummaryrefslogtreecommitdiff
path: root/hw/sun4m.c
AgeCommit message (Collapse)Author
2009-07-27kill drives_tableGerd Hoffmann
First step cleaning up the drives handling. This one does nothing but removing drives_table[], still it became seriously big. drive_get_index() is gone and is replaced by drives_get() which hands out DriveInfo pointers instead of a table index. This needs adaption in *tons* of places all over. The drives are now maintained as linked list. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-21Sparc32: convert Sun4c interrupt controller to qdevBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-07-21Sparc32: convert SBI to qdevBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-07-21Sparc32/64: use 64 bit type for memory sizeBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-07-21Sparc32: Fix lanceBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-07-17Fix sparc-softmmu breakage by ee6847d19be16c789b8bd4e553b7cd6701ba1245Blue Swirl
Move the qdev_init(dev); call after the setting of d->size. Thanks to Filip Navara. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-07-16qdev: rework device properties.Gerd Hoffmann
This patch is a major overhaul of the device properties. The properties are saved directly in the device state struct now, the linked list of property values is gone. Advantages: * We don't have to maintain the list with the property values. * The value in the property list and the value actually used by the device can't go out of sync any more (used to happen for the pci.devfn == -1 case) because there is only one place where the value is stored. * A record describing the property is required now, you can't set random properties any more. There are bus-specific and device-specific properties. The former should be used for properties common to all bus drivers. Typical use case is bus addressing, i.e. pci.devfn and i2c.address. Properties have a PropertyInfo struct attached with name, size and function pointers to parse and print properties. A few common property types have PropertyInfos defined in qdev-properties.c. Drivers are free to implement their own very special property parsers if needed. Properties can have default values. If unset they are zero-filled. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-16Sparc32: convert slavio interrupt controller to qdevBlue Swirl
Also increase QDEV_MAX_IRQ. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-07-16Sparc32: refactor CPU initBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-07-16Sparc32: convert memory to qdevBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-07-16Sparc32: convert boot prom to qdevBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-07-16Sparc32: convert cs4231 to qdevBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-07-15Sparc32: convert sparc32_dma to qdevBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-07-13Sparc32: convert slavio_misc to qdevBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-07-13Sparc32: convert idreg to qdevBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-06-29Revert "Introduce reset notifier order"Jan Kiszka
This reverts commit 8217606e6edb49591b4a6fd5a0d1229cebe470a9 (and updates later added users of qemu_register_reset), we solved the problem it originally addressed less invasively. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-30Use relative path for biosPaul Brook
Look for bios and other support files relative to qemu binary, rather than a hardcoded prefix. Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-05-26Remove qdev irq sink handlingPaul Brook
We have both IRQ sinks and GPIO inputs. These are in principle exactly the same thing, so remove the former. Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-05-22Introduce reset notifier orderJan Kiszka
Add the parameter 'order' to qemu_register_reset and sort callbacks on registration. On system reset, callbacks with lower order will be invoked before those with higher order. Update all existing users to the standard order 0. Note: At least for x86, the existing users seem to assume that handlers are called in their registration order. Therefore, the patch preserves this property. If someone feels bored, (s)he could try to identify this dependency and express it properly on callback registration. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-21Introduce is_default field for QEMUMachineAnthony Liguori
f80f9ec changed the order that machines are registered which had the effect of changing the default machine. This changeset introduces a new is_default field so that machine types can declare that they are the default for an architecture. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-21Refactor how display drivers are selectedAnthony Liguori
My previous commit, f92f8afebe, broke -vnc (spotted by Glauber Costa). This is because it's necessary to tell when the no special display parameters have been passed and default to SDL or VNC appropriately. This refactors the display selection logic to be less complicated which has the effect of fixing the regression mentioned above. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-21Convert machine registration to use module init functionsAnthony Liguori
This cleans up quite a lot of #ifdefs, extern variables, and other ugliness. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-14ESP SCSI qdev conversionPaul Brook
Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-05-14PCI network qdev conversionPaul Brook
Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-05-13Replace gcc variadic macro extension with C99 versionBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-05-13Remove vga_ram_sizePaul Brook
The vga_ram_size argument to machine init functions always has the same value, and is ignored by many machines (including SPARC32 which has an obsolete ifdef for VGA_RAM_SIZE). Remove it and push VGA_RAM_SIZE into vga_int.h. Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-04-11Remove redundant ram_require machine properly.pbrook
Signed-off-by: Paul Brook <paul@codesourcery.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7090 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-09Cleanup SPARC/TCX framebuffer allocation.pbrook
Signed-off-by: Paul Brook <paul@codesourcery.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7059 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-28Remove nodisk_ok machine feature (Jan Kiszka)aliguori
All archs have some kind of firmware to load and can be fine with it already. So there is not much use in enforcing the presence of a disk. If the system setup requires one, the user will notice it anyway once the firmware/bios fails to boot from it. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6899 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-08Use firmware configuration instead of NVRAM (initial patch by Aurelien Jarno)blueswir1
Use firmware configuration device for boot device, kernel, initrd and kernel command line parameters on PPC, Sparc32 and Sparc64. Update OpenBIOS images to r479 which supports the change. git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6777 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-05monitor: Rework API (Jan Kiszka)aliguori
Refactor the monitor API and prepare it for decoupled terminals: term_print functions are renamed to monitor_* and all monitor services gain a new parameter (mon) that will once refer to the monitor instance the output is supposed to appear on. However, the argument remains unused for now. All monitor command callbacks are also extended by a mon parameter so that command handlers are able to pass an appropriate reference to monitor output services. For the case that monitor outputs so far happen without clearly identifiable context, the global variable cur_mon is introduced that shall once provide a pointer either to the current active monitor (while processing commands) or to the default one. On the mid or long term, those use case will be obsoleted so that this variable can be removed again. Due to the broad usage of the monitor interface, this patch mostly deals with converting users of the monitor API. A few of them are already extended to pass 'mon' from the command handler further down to internal functions that invoke monitor_printf. At this chance, monitor-related prototypes are moved from console.h to a new monitor.h. The same is done for the readline API. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6711 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-16graphical_console_init change (Stefano Stabellini)aliguori
Patch 5/7 This patch changes the graphical_console_init function to return an allocated DisplayState instead of a QEMUConsole. This patch contains just the graphical_console_init change and few other modifications mainly in console.c and vl.c. It was necessary to move the display frontends (e.g. sdl and vnc) initialization after machine->init in vl.c. This patch does *not* include any required changes to any device, these changes come with the following patches. Patch 6/7 This patch changes the QEMUMachine init functions not to take a DisplayState as an argument because is not needed any more; In few places the graphic hardware initialization function was called only if DisplayState was not NULL, now they are always called. Apart from these cases, the rest are all mechanical substitutions. Patch 7/7 This patch updates the graphic device code to use the new graphical_console_init function. As for the previous patch, in few places graphical_console_init was called only if DisplayState was not NULL, now it is always called. Apart from these cases, the rest are all mechanical substitutions. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6344 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-14escc: allow one IRQ per serial channelaurel32
The Z85C30 on the PowerMAC machines have one interrupt per serial channel, while the Sparc machines have only one for both. Allow the emulated device to use one IRQ per channel. Patch by Laurent Vivier. git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6295 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-13sun4c/sun4d: also swap the CharDriverState of escc_init()aurel32
Forgotten in r6284 Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6290 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-13Check NIC model in some NIC init functions (Mark McLoughlin)aliguori
Some NIC init functions are only called when that model is the only valid model. In that case, it makes sense to use qemu_check_nic_model() from the NIC init function itself. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6286 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-13ESCC: swap the two CharDriverState argumentsaurel32
Swap the two CharDriverState arguments so that the first argument corresponds to the channel A and the second argument to the channel B. Modify hw/sun4m.c accordingly. This fixes the order of the serial ports on the PPC machines. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6284 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-12Rename slavio_serial functions to escc, add clock rate and it_shift parametersblueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6270 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-10Fix segfaultblueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6267 c046a42c-6fe2-441c-8c8c-71466251a162
2008-12-24Sun4m use 0 for nonexistent devices (Robert Reif)blueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6127 c046a42c-6fe2-441c-8c8c-71466251a162
2008-12-13Remove unnecessary trailing newlinesblueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6000 c046a42c-6fe2-441c-8c8c-71466251a162
2008-11-29Don't rely on the fact that MAX_FD is 2 (Herve Poussineau)blueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5810 c046a42c-6fe2-441c-8c8c-71466251a162
2008-11-05Use qemu_ram_allocblueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5630 c046a42c-6fe2-441c-8c8c-71466251a162
2008-11-02More realistic max_cpusblueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5604 c046a42c-6fe2-441c-8c8c-71466251a162
2008-11-02Fix loading of unstripped ELF PROM imageblueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5603 c046a42c-6fe2-441c-8c8c-71466251a162
2008-11-02Halt the CPU using a qemu_irqblueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5601 c046a42c-6fe2-441c-8c8c-71466251a162
2008-10-31Make DMA bottom-half driven (v2)aliguori
The current DMA routines are driven by a call in main_loop_wait() after every select. This patch converts the DMA code to be driven by a constantly rescheduled bottom half. The advantage of using a scheduled bottom half is that we can stop scheduling the bottom half when there no DMA channels are runnable. This means we can potentially detect this case and sleep longer in the main loop. The only two architectures implementing DMA_run() are cris and i386. For cris, I converted it to a simple repeating bottom half. I've only compile tested this as cris does not seem to work on a 64-bit host. It should be functionally identical to the previous implementation so I expect it to work. For x86, I've made sure to only fire the DMA bottom half if there is a DMA channel that is runnable. The effect of this is that unless you're using sb16 or a floppy disk, the DMA bottom half never fires. You probably should test this malc. My own benchmarks actually show slight improvement by it's possible the change in timing could affect your demos. Since v1, I've changed the code to use a BH instead of a timer. cris at least seems to depend on faster than 10ms polling. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5573 c046a42c-6fe2-441c-8c8c-71466251a162
2008-10-28Sun4c cleanups (Robert Reif)blueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5568 c046a42c-6fe2-441c-8c8c-71466251a162
2008-10-27Move sun4c to its own hwdef (Robert Reif)blueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5549 c046a42c-6fe2-441c-8c8c-71466251a162
2008-10-07machine struct - specify max_cpus at the per machine level (Jes Sorensen)aliguori
Introduce a max_cpus per-machine variable, allowing individual boards to limit it's number of CPUs. Check requested number of CPUs in setup code and exit if it exceeds the supported number for the machine. This also renders the static MAX_CPUS check obsolete, so remove this from vl.c. Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5443 c046a42c-6fe2-441c-8c8c-71466251a162
2008-10-04Move nographic export to sysemu.hblueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5414 c046a42c-6fe2-441c-8c8c-71466251a162
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-16 10:25:42 +0000