aboutsummaryrefslogtreecommitdiff
path: root/hw/ssi/aspeed_smc.c
AgeCommit message (Collapse)Author
2020-03-23aspeed/smc: Fix DMA support for AST2600Cédric Le Goater
Recent firmwares uses SPI DMA transfers in U-Boot to load the different images (kernel, initrd, dtb) in the SoC DRAM. The AST2600 FMC model is missing the masks to be applied on the DMA registers which resulted in incorrect values. Fix that and wire the SPI controllers which have DMA support on the AST2600. Fixes: bcaa8ddd081c ("aspeed/smc: Add AST2600 support") Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20200320053923.20565-1-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-17aspeed/smc: Fix number of dummy cycles for FAST_READ_4 commandGuenter Roeck
The Linux kernel recently started using FAST_READ_4 commands. This results in flash read failures. At the same time, the m25p80 emulation is seen to read 8 more bytes than expected. Adjusting the expected number of dummy cycles to match FAST_READ fixes the problem. Fixes: f95c4bffdc4c ("aspeed/smc: snoop SPI transfers to fake dummy cycles") Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-12aspeed/smc: Fix User mode select/unselect schemeCédric Le Goater
The Aspeed SMC Controller can operate in different modes : Read, Fast Read, Write and User modes. When the User mode is configured, it selects automatically the SPI slave device until the CE_STOP_ACTIVE bit is set to 1. When any other modes are configured the device is unselected. The HW logic handles the chip select automatically when the flash is accessed through its AHB window. When configuring the CEx Control Register, the User mode logic to select and unselect the slave is incorrect and data corruption can be seen on machines using two chips, witherspoon and romulus. Rework the handler setting the CEx Control Register to fix this issue. Fixes: 7c1c69bca43c ("ast2400: add SMC controllers (FMC and SPI)") Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 20200206112645.21275-3-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-03-12aspeed/smc: Add some tracingCédric Le Goater
Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200206112645.21275-2-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-24qdev: set properties with device_class_set_props()Marc-André Lureau
The following patch will need to handle properties registration during class_init time. Let's use a device_class_set_props() setter. spatch --macro-file scripts/cocci-macro-file.h --sp-file ./scripts/coccinelle/qdev-set-props.cocci --keep-comments --in-place --dir . @@ typedef DeviceClass; DeviceClass *d; expression val; @@ - d->props = val + device_class_set_props(d, val) Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20200110153039.1379601-20-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-12-16aspeed/smc: Add AST2600 timings registersCédric Le Goater
Each CS has its own Read Timing Compensation Register on newer SoCs. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20191119141211.25716-13-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-12-16aspeed/smc: Do not map disabled segment on the AST2600Cédric Le Goater
The segments can be disabled on the AST2600 (zero register value). CS0 is open by default but not the other CS. This is closing the access to the flash device in user mode and forbids scanning. In the model, check the segment size and disable the associated region when the value is zero. Fixes: bcaa8ddd081c ("aspeed/smc: Add AST2600 support") Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20191119141211.25716-12-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-12-16aspeed/smc: Restore default AHB window mapping at resetCédric Le Goater
The current model only restores the Segment Register values but leaves the previous CS mapping behind. Introduce a helper setting the register value and mapping the region at the requested address. Use this helper when a Segment register is set and at reset. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20191119141211.25716-11-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-15aspeed/smc: Add AST2600 supportCédric Le Goater
The AST2600 SoC SMC controller is a SPI only controller now and has a few extensions which we will need to take into account when SW requires it. This is enough to support u-boot and Linux. Signed-off-by: Cédric Le Goater <clg@kaod.org> Acked-by: Joel Stanley <joel@jms.id.au> Message-id: 20190925143248.10000-14-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-10-15aspeed/smc: Introduce segment operationsCédric Le Goater
AST2600 will use a different encoding for the addresses defined in the Segment Register. Signed-off-by: Cédric Le Goater <clg@kaod.org> Acked-by: Joel Stanley <joel@jms.id.au> Message-id: 20190925143248.10000-13-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-13aspeed/smc: Calculate checksum on normal DMAChristian Svensson
This patch adds the missing checksum calculation on normal DMA transfer. According to the datasheet this is how the SMC should behave. Verified on AST1250 that the hardware matches the behaviour. Signed-off-by: Christian Svensson <bluecmd@google.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20190904070506.1052-9-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-13aspeed/smc: Inject errors in DMA checksumCédric Le Goater
Emulate read errors in the DMA Checksum Register for high frequencies and optimistic settings of the Read Timing Compensation Register. This will help in tuning the SPI timing calibration algorithm. Errors are only injected when the property "inject_failure" is set to true as suggested by Philippe. The values below are those to expect from the first flash device of the FMC controller of a palmetto-bmc machine. Cc: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20190904070506.1052-8-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-13aspeed/smc: Add DMA calibration settingsCédric Le Goater
When doing calibration, the SPI clock rate in the CE0 Control Register and the read delay cycles in the Read Timing Compensation Register are set using bit[11:4] of the DMA Control Register. Signed-off-by: Cédric Le Goater <clg@kaod.org> Acked-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20190904070506.1052-7-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-13aspeed/smc: Add support for DMAsCédric Le Goater
The FMC controller on the Aspeed SoCs support DMA to access the flash modules. It can operate in a normal mode, to copy to or from the flash module mapping window, or in a checksum calculation mode, to evaluate the best clock settings for reads. The model introduces two custom address spaces for DMAs: one for the AHB window of the FMC flash devices and one for the DRAM. The latter is populated using a "dram" link set from the machine with the RAM container region. Signed-off-by: Cédric Le Goater <clg@kaod.org> Acked-by: Joel Stanley <joel@jms.id.au> Message-id: 20190904070506.1052-6-clg@kaod.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-09-13aspeed: Use consistent typenamesCédric Le Goater
Improve the naming of the different controller models to ease their generation when initializing the SoC. The rename of the SMC types is breaking migration compatibility. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20190904070506.1052-5-clg@kaod.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-08-16Clean up inclusion of sysemu/sysemu.hMarkus Armbruster
In my "build everything" tree, changing sysemu/sysemu.h triggers a recompile of some 5400 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). Almost a third of its inclusions are actually superfluous. Delete them. Downgrade two more to qapi/qapi-types-run-state.h, and move one from char/serial.h to char/serial.c. hw/semihosting/config.c, monitor/monitor.c, qdev-monitor.c, and stubs/semihost.c define variables declared in sysemu/sysemu.h without including it. The compiler is cool with that, but include it anyway. This doesn't reduce actual use much, as it's still included into widely included headers. The next commit will tackle that. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-27-armbru@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2019-08-16Include hw/qdev-properties.h lessMarkus Armbruster
In my "build everything" tree, changing hw/qdev-properties.h triggers a recompile of some 2700 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). Many places including hw/qdev-properties.h (directly or via hw/qdev.h) actually need only hw/qdev-core.h. Include hw/qdev-core.h there instead. hw/qdev.h is actually pointless: all it does is include hw/qdev-core.h and hw/qdev-properties.h, which in turn includes hw/qdev-core.h. Replace the remaining uses of hw/qdev.h by hw/qdev-properties.h. While there, delete a few superfluous inclusions of hw/qdev-core.h. Touching hw/qdev-properties.h now recompiles some 1200 objects. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Daniel P. Berrangé" <berrange@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20190812052359.30071-22-armbru@redhat.com>
2019-08-16Include migration/vmstate.h lessMarkus Armbruster
In my "build everything" tree, changing migration/vmstate.h triggers a recompile of some 2700 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). hw/hw.h supposedly includes it for convenience. Several other headers include it just to get VMStateDescription. The previous commit made that unnecessary. Include migration/vmstate.h only where it's still needed. Touching it now recompiles only some 1600 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-16-armbru@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16Include hw/irq.h a lot lessMarkus Armbruster
In my "build everything" tree, changing hw/irq.h triggers a recompile of some 5400 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). hw/hw.h supposedly includes it for convenience. Several other headers include it just to get qemu_irq and.or qemu_irq_handler. Move the qemu_irq and qemu_irq_handler typedefs from hw/irq.h to qemu/typedefs.h, and then include hw/irq.h only where it's still needed. Touching it now recompiles only some 500 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20190812052359.30071-13-armbru@redhat.com>
2019-07-01aspeed/smc: add a 'sdram_base' propertyCédric Le Goater
The DRAM address of a DMA transaction depends on the DRAM base address of the SoC. Inform the SMC controller model with this value. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190618165311.27066-15-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-06-12Include qemu/module.h where needed, drop it from qemu-common.hMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-4-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for hw/usb/dev-hub.c hw/misc/exynos4210_rng.c hw/misc/bcm2835_rng.c hw/misc/aspeed_scu.c hw/display/virtio-vga.c hw/arm/stm32f205_soc.c; ui/cocoa.m fixed up]
2019-01-29aspeed/smc: snoop SPI transfers to fake dummy cyclesCédric Le Goater
The m25p80 models dummy cycles using byte transfers. This works well when the transfers are initiated by the QEMU model of a SPI controller but when these are initiated by the OS, it breaks emulation. Snoop the SPI transfer to catch commands requiring dummy cycles and replace them with byte transfers compatible with the m25p80 model. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Francisco Iglesias <frasse.iglesias@gmail.com> Message-id: 20190124140519.13838-5-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-29aspeed/smc: Add dummy data registerCédric Le Goater
The SMC controllers have a register containing the byte that will be used as dummy output. It can be modified by software. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20190124140519.13838-4-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-29aspeed/smc: define registers for all possible CSCédric Le Goater
The model should expose one control register per possible CS. When testing the validity of the register number in the read operation, replace 's->num_cs' by 'ctrl->max_slaves' which represents the maximum number of flash devices a controller can handle. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20190124140519.13838-3-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-29aspeed/smc: fix default read valueCédric Le Goater
0xFFFFFFFF should be returned for non implemented registers. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 20190124140519.13838-2-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-09-25aspeed/smc: fix some alignment issuesCédric Le Goater
Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180921161939.822-6-clg@kaod.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-26aspeed/smc: rename aspeed_smc_flash_send_addr() to aspeed_smc_flash_setup()Cédric Le Goater
Also handle the fake transfers for dummy bytes in this setup routine. It will be useful when we activate MMIO execution. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 20180612065716.10587-4-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-26aspeed/smc: fix HW strappingCédric Le Goater
Only the flash type is strapped by HW. The 4BYTE mode is set by firmware when the flash device is detected. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 20180612065716.10587-3-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-06-26aspeed/smc: fix dummy cycles count when in dual IO modeCédric Le Goater
When configured in dual I/O mode, address and data are sent in dual mode, including the dummy byte cycles in between. Adapt the count to the IO setting. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 20180612065716.10587-2-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-12-18hw/ssi/aspeed_smc: remove unused #includePhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-12-18misc: avoid "include/" in include pathPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2017-02-10aspeed/smc: use a modulo to check segment limitsCédric Le Goater
The size of a segment is not necessarily a power of 2. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 1486648058-520-5-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-10aspeed/smc: handle dummies only in fast read modeCédric Le Goater
HW works fine in normal read mode with dummy bytes being set. So let's check this case to not transfer bytes. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 1486648058-520-4-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-27aspeed/smc: handle dummy bytes when doing fast reads in command modeCédric Le Goater
When doing fast read, a certain amount of dummy bytes should be sent before the read. This number is configurable in the controler CE0 Control Register and needs to be modeled using fake transfers to the flash module. This only supports command mode. User mode requires more work and a possible extension of the m25p80 device model. Signed-off-by: Cédric Le Goater <clg@kaod.org> Acked-by: Marcin Krzemiński <mar.krzeminski@gmail.com> Message-id: 1484751701-2646-1-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-20aspeed/smc: handle SPI flash Command modeCédric Le Goater
The Aspeed SMC controllers have a mode (Command mode) in which accesses to the flash content are no different than doing MMIOs. The controller generates all the necessary commands to load (or store) data in memory. However, accesses are restricted to the segment window assigned the the flash module by the controller. This window is defined by the Segment Address Register. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1483979087-32663-8-git-send-email-clg@kaod.org [PMM: Deleted now-unused aspeed_smc_is_usermode() function] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-20aspeed/smc: adjust the size of the register regionCédric Le Goater
The SPI controller of the AST2400 SoC has less registers. So we can adjust the size of the memory region holding the registers depending on the controller type. We can also remove the guest_error logging which is useless as the range of the region is strict enough. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 1483979087-32663-7-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-20aspeed/smc: unfold the AspeedSMCController arrayCédric Le Goater
This is getting difficult to read. Also add a 'has_dma' field for each controller type. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1483979087-32663-6-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-20aspeed/smc: autostrap CE0/1 configurationCédric Le Goater
On the AST2500 SoC, the FMC controller flash type is fixed to SPI for CE0 and CE1 and 4BYTE mode is autodetected for CE0. On the AST2400 SoC, the FMC controller flash type and 4BYTE mode are strapped with register SCU70. We use the default settings from the palmetto-bmc machine for now. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1483979087-32663-5-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-20aspeed/smc: rework the prototype of the AspeedSMCFlash helper routinesCédric Le Goater
Change the routines prototype to use a 'AspeedSMCFlash *' instead of 'AspeedSMCState *'. The result will help in making future changes clearer. Also change aspeed_smc_update_cs() which uselessly loops on all slave devices to update their status. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1483979087-32663-4-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-20aspeed/smc: remove call to aspeed_smc_update_cs() in reset functionCédric Le Goater
Instead, we can simply set the irq level when unselecting the slave devices. This change prepares ground for a subsequent cleanup of the aspeed_smc_update_cs() routine which uselessly loops on all slaves to update their status. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 1483979087-32663-3-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-20aspeed/smc: remove call to reset in realize functionCédric Le Goater
This is useless as reset will be called later on. Signed-off-by: Cédric Le Goater <clg@kaod.org> Acked-by: Marcin Krzemiński <mar.krzeminski@gmail.com> Message-id: 1483979087-32663-2-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-12-27aspeed/smc: improve segment register supportCédric Le Goater
The HW does not enforce all the rules in the specs and allows a few "curious" setups like zero size segments and overlaps. So change the model to be in sync but keep the warnings which are always interesting for debug. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Message-id: 1480434248-27138-13-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-17aspeed: add support for the SMC segment registersCédric Le Goater
The SMC controller on the Aspeed SoC has a set of registers to configure the mapping of each flash module in the SoC address space. Writing to these registers triggers a remap of the memory region and the spec requires a certain number of checks before doing so. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1474977462-28032-7-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-17aspeed: create mapping regions for the maximum number of slavesCédric Le Goater
The SMC controller on the Aspeed SoC has a set of registers to configure the mapping of each flash module in the SoC address space. These mapping windows are configurable even though no SPI slave is attached to the controller. Also rewrite a bit the comments in the code on this topic. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1474977462-28032-6-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-17aspeed: add support for the AST2500 SoC SMC controllersCédric Le Goater
The SMC controllers on the Aspeed AST2500 SoC are very similar to the ones found on the AST2400. The differences are on the number of supported flash modules and their default mappings in the SoC address space. The Aspeed AST2500 has one SPI controller for the BMC firmware and two for the host firmware. All controllers have now the same set of registers compatible with the AST2400 FMC controller and the legacy 'SMC' controller is fully gone. We keep the FMC object to act as the BMC SPI controller and add a new SPI controller for the host. We also have to introduce new type names to handle the differences in the flash modules memory mappping. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1474977462-28032-5-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-17aspeed: move the flash module mapping address under the controller definitionCédric Le Goater
This will ease the definition of the new controllers for the AST2500 SoC and also ease the support of the segment registers, which provide a way to reconfigure the mapping window of each slave. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Message-id: 1474977462-28032-3-git-send-email-clg@kaod.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-07-14ast2400: pretend DMAs are done for U-bootCédric Le Goater
U-boot does SPI timing calibration using DMA tranfers. To let the initialization continue, we fake success by setting the DMA status of the Interrupt Control Register. For the moment, DMA support is not required as it is not used in normal operation. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 1467994016-11678-4-git-send-email-clg@kaod.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-07-14ast2400: replace aspeed_smc_is_implemented()Cédric Le Goater
aspeed_smc_is_implemented() filters invalid registers in a peculiar way. Let's remove it and open code the if conditions. It serves the same purpose, the aesthetic is better, and new registers can easily be added. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 1467994016-11678-3-git-send-email-clg@kaod.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-07-04ast2400: add SPI flash slavesCédric Le Goater
Each controller on the ast2400 has a memory range on which it maps its flash module slaves. Each slave is assigned a memory segment for its mapping that can be changed at bootime with the Segment Address Register. This is not supported in the current implementation so we are using the defaults provided by the specs. Each SPI flash slave can then be accessed in two modes: Command and User. When in User mode, accesses to the memory segment of the slaves are translated in SPI transfers. When in Command mode, the HW generates the SPI commands automatically and the memory segment is accessed as if doing a MMIO. Other SPI controllers call that mode linear addressing mode. For this purpose, we are adding below each crontoller an array of structs gathering for each SPI flash module, a segment rank, a MemoryRegion to handle the memory accesses and the associated SPI slave device, which should be a m25p80. Only the User mode is supported for now but we are preparing ground for the Command mode. The framework is sufficient to support Linux. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 1467138270-32481-8-git-send-email-clg@kaod.org [PMM: Use g_new0() rather than g_malloc0()] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-07-04ast2400: add SMC controllers (FMC and SPI)Cédric Le Goater
The Aspeed AST2400 soc includes a static memory controller for the BMC which supports NOR, NAND and SPI flash memory modules. This controller has two modes : the SMC for the legacy interface which supports only one module and the FMC for the new interface which supports up to five modules. The AST2400 also includes a SPI only controller used for the host firmware, commonly called BIOS on Intel. It can be used in three mode : a SPI master, SPI slave and SPI pass-through Below is the initial framework for the SMC controller (FMC mode only) and the SPI controller: the sysbus object, MMIO for registers configuration and controls. Each controller has a SPI bus and a configurable number of CS lines for SPI flash slaves. The differences between the controllers are small, so they are abstracted using indirections on the register numbers. Only SPI flash modules are supported. Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 1467138270-32481-7-git-send-email-clg@kaod.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: added one missing error_propagate] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-22 13:10:04 +0000