aboutsummaryrefslogtreecommitdiff
path: root/hw/sparc
AgeCommit message (Collapse)Author
2014-12-22fw_cfg: move boards to fw_cfg_init_io() / fw_cfg_init_mem()Laszlo Ersek
This allows us to drop the fw_cfg_init() shim and to enforce the possible mappings at compile time. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1419250305-31062-3-git-send-email-pbonzini@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-22bootdevice: add Error **errp argument for QEMUBootSetHandlerGonglei
It will be useful for checking when we change traditional boot order dynamically and propagate error message to the monitor. For x86 architecture, we pass &local_err to set_boot_dev() when vm startup in pc_coms_init(). Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Alexander Graf <agraf@suse.de> Cc: Blue Swirl <blauwirbel@gmail.com> Cc: qemu-ppc@nongnu.org Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
2014-10-20hw: Convert from BlockDriverState to BlockBackend, mostlyMarkus Armbruster
Device models should access their block backends only through the block-backend.h API. Convert them, and drop direct includes of inappropriate headers. Just four uses of BlockDriverState are left: * The Xen paravirtual block device backend (xen_disk.c) opens images itself when set up via xenbus, bypassing blockdev.c. I figure it should go through qmp_blockdev_add() instead. * Device model "usb-storage" prompts for keys. No other device model does, and this one probably shouldn't do it, either. * ide_issue_trim_cb() uses bdrv_aio_discard() instead of blk_aio_discard() because it fishes its backend out of a BlockAIOCB, which has only the BlockDriverState. * PC87312State has an unused BlockDriverState[] member. The next two commits take care of the latter two. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-09-23tcx: Implement hardware accelerationMark Cave-Ayland
The S24/TCX framebuffer is a mildly accelerated video card with blitter, stippler and hardware cursor. * Solaris and NetBSD 6.x use all the hardware acceleration features * The Xorg driver (used by Linux) can use the hardware cursor only This patch implements hardware acceleration in both 8 bit and 24 bit modes. It is based on the NetBSD driver sources and from tests with Solaris. Signed-off-by: Olivier Danet <odanet@caramail.com> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2014-09-09memory: add parameter errp to memory_region_init_ramHu Tao
Add parameter errp to memory_region_init_ram and update all call sites to pass in &error_abort. Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-05tcx: move initialisation from realizefn to initfnMark Cave-Ayland
Initialisation cleanup as suggested by Andreas. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> CC: Andreas Färber <afaerber@suse.de>
2014-05-28machine: Conversion of QEMUMachineInitArgs to MachineStateMarcel Apfelbaum
Total removal of QEMUMachineInitArgs struct. QEMUMachineInitArgs's fields are copied into MachineState. Removed duplicated fields from MachineState. All the other changes are only mechanical refactoring, no semantic changes. Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> (s390) Reviewed-by: Michael S. Tsirkin <mst@redhat.com> (PC) [AF: Renamed ms -> machine, use MACHINE_GET_CLASS()] Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-02-27sun4m: Add Sun CG3 framebuffer initialisation functionMark Cave-Ayland
In order to allow the user to choose the framebuffer for sparc-softmmu, add -vga tcx and -vga cg3 options to the QEMU command line. If no option is specified, the default TCX framebuffer is used. Since proprietary FCode ROMs use a resolution of 1152x900, slightly relax the validation rules to allow both displays to be initiated at the higher resolution used by these ROMs upon request (OpenBIOS FCode ROMs default to the normal QEMU sun4m default resolution of 1024x768). Finally move any fprintf(stderr ...) statements in the areas affected by this patch over to the new error_report() function. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> CC: Blue Swirl <blauwirbel@gmail.com> CC: Anthony Liguori <aliguori@amazon.com> CC: Peter Maydell <peter.maydell@linaro.org> CC: Bob Breuer <breuerr@mc.net> CC: Artyom Tarasenko <atar4qemu@gmail.com>
2014-02-15sparc/leon3: Initialize stack pointerSebastian Huber
A lot of real world LEON3 systems are shipped with the GRMON boot loader. This boot loader initializes the stack pointer with the end of RAM address. The application can use this to detect the RAM size of a particular board variant. Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de> Reviewed-by: Fabien Chouteau <chouteau@adacore.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-02-11exec: Make cpu_physical_memory_write_rom input an ASEdgar E. Iglesias
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2013-11-21sun4m: Add FCode ROM for TCX framebufferMark Cave-Ayland
Upstream OpenBIOS now implements SBus probing in order to determine the contents of a physical bus slot, which is required to allow OpenBIOS to identify the framebuffer without help from the fw_cfg interface. SBus probing works by detecting the presence of an FCode program (effectively tokenised Forth) at the base address of each slot, and if present executes it so that it creates its own device node in the OpenBIOS device tree. The FCode ROM is generated as part of the OpenBIOS build and should generally be updated at the same time. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> CC: Blue Swirl <blauwirbel@gmail.com> CC: Bob Breuer <breuerr@mc.net> CC: Artyom Tarasenko <atar4qemu@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-11-05leon3: Don't enforce use of -bios with qtestAndreas Färber
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-08-28hw: Clean up bogus default boot orderMarkus Armbruster
We set default boot order "cad" in every single machine definition except "pseries" and "moxiesim", even though very few boards actually care for boot order, and "cad" makes sense for even fewer. Machines that care: * pc and its variants Accept up to three letters 'a', 'b' (undocumented alias for 'a'), 'c', 'd' and 'n'. Reject all others (fatal with -boot). * nseries (n800, n810) Check whether order starts with 'n'. Silently ignored otherwise. * prep, g3beige, mac99 Extract the first character the machine understands (subset of 'a'..'f'). Silently ignored otherwise. * spapr Accept an arbitrary string (vl.c restricts it to contain only 'a'..'p', no duplicates). * sun4[mdc] Use the first character. Silently ignored otherwise. Strip characters these machines ignore from their default boot order. For all other machines, remove the unused default boot order alltogether. Note that my rename of QEMUMachine member boot_order to default_boot_order and QEMUMachineInitArgs member boot_device to boot_order has a welcome side effect: it makes every use of boot orders visible in this patch, for easy review. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-08-21sun4: Don't prematurely explode QEMUMachineInitArgsMarkus Armbruster
Don't explode QEMUMachineInitArgs before passing it to sun4m_hw_init(), sun4uv_init(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-29sun4m: QOM cast cleanup for RamDeviceAndreas Färber
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-29sun4m: QOM cast cleanup for PROMStateAndreas Färber
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-29sun4m: QOM cast cleanup for AFXStateAndreas Färber
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-29sun4m: QOM cast cleanup for IDRegStateAndreas Färber
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-26sun4m: add display width and height to the firmware configurationMark Cave-Ayland
Currently the graphics resolution for TCX is fixed at 1024x768, however other framebuffers are capable of supporting additional resolutions. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> CC: Anthony Liguori <aliguori@us.ibm.com> CC: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-07-09cpu: Replace cpu_single_env with CPUState current_cpuAndreas Färber
Move it to qom/cpu.h. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-04hw/s*: pass owner to memory_region_init* functionsPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-04memory: add owner argument to initialization functionsPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-06-02refer to FWCfgState explicitlyLaszlo Ersek
Currently some places use pointer-to-void even though they mean pointer-to-FWCfgState. Clean them up. Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-06-02firmware_abi: move to include/hw/nvram/Michael S. Tsirkin
firmware_abi.h with structs for OpenBIOS landed in hw/sparc/ by mistake - move it to hw/nvram/ alongside fw_cfg.h. In addition to sparc it's included from ppc mac_nvram.c and will need to include it from prep.c in the future. Acked-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-05-26Remove Sun4c, Sun4d and a few CPUsBlue Swirl
Sun4c and Sun4d architectures and related CPUs are not fully implemented (especially Sun4c MMU) and there has been no interest for them. Likewise, a few CPUs (Cypress, Ross etc) are only half implemented. Remove the machines and CPUs, they can be re-added if needed later. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-04-20qdev: Drop taddr propertiesPeter Maydell
Drop all the infrastructure for taddr properties (ie ones which are 'hwaddr' sized). These are now unused, and any further desired use would be rather questionable since device properties shouldn't generally depend on a type that is conceptually variable based on the target CPU. 32 or 64 bit integer properties should be used instead as appropriate for the specific device. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-04-15sysemu: avoid proliferation of include/ subdirectoriesPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move other devices to hw/misc/, configure with default-configs/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move interrupt controllers to hw/intc/, configure with default-configs/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move DMA controllers to hw/dma/, configure with default-configs/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move timer devices to hw/timer/, configure with default-configs/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move char devices to hw/char/, configure via default-configs/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move display devices to hw/display/, configure via default-configs/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move audio devices to hw/audio/, configure via default-configs/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move NICs to hw/net/, configure via default-configs/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-08hw: move headers to include/Paolo Bonzini
Many of these should be cleaned up with proper qdev-/QOM-ification. Right now there are many catch-all headers in include/hw/ARCH depending on cpu.h, and this makes it necessary to compile these files per-target. However, fixing this does not belong in these patches. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-28hw/tcx: Remove unused 'addr' field and the property that sets itPeter Maydell
Remove the 'addr' field from TCXState (since it is completely unused), also the qdev property which sets it. This seems to be a relic from many years past; devices don't need to know where they are mapped. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-12cpu: Pass CPUState to cpu_interrupt()Andreas Färber
Move it to qom/cpu.h to avoid issues with include order. Change pc_acpi_smi_interrupt() opaque to X86CPU. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-03-12exec: Pass CPUState to cpu_reset_interrupt()Andreas Färber
Move it to qom/cpu.c to avoid build failures depending on include order of cpu-qom.h and exec/cpu-all.h. Change opaques of various ..._irq_handler() functions to the appropriate CPU type to facilitate using cpu_reset_interrupt(). Fix Coding Style issues while at it (missing braces, indentation). Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-03-12cpu: Move halted and interrupt_request fields to CPUStateAndreas Färber
Both fields are used in VMState, thus need to be moved together. Explicitly zero them on reset since they were located before breakpoints. Pass PowerPCCPU to kvmppc_handle_halt(). Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-03-01hw: move boards and other isolated files to hw/ARCHPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-06-07build: move obj-TARGET-y variables to nested Makefile.objsPaolo Bonzini
Also drop duplicate occurrence of device-hotplug.o. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-17 16:20:42 +0000